Works in International Journal of Advanced Manufacturing Technology, 2019, Vol 105, Issue 7/8

Results: 61

Physical simulation of investment casting for GTD-222 Ni-based superalloy processed by controlled cooling rates.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3531, doi. 10.1007/s00170-019-04616-y

By:

Yu, Jiangping;
Wang, Donghong;
Li, Dayong;
Tang, Ding;
Zhu, Guoliang;
Dong, Anping;
Shu, Da;
Peng, Yinghong

Publication type:

Article

Identification of the scraping quality for the machine tool using the smartphone.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3451, doi. 10.1007/s00170-019-04608-y

By:

Chen, Ming-Fei;
Chen, Cheng-Wen;
Su, Chun-Jung;
Huang, Wei-Lun;
Hsiao, Wen-Tse

Publication type:

Article

FEM modeling simulation of laser engraving.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3489, doi. 10.1007/s00170-019-04603-3

By:

Nikolidakis, Evangelos;
Antoniadis, Aristomenis

Publication type:

Article

The effect of wire feed geometry on electron beam freeform 3D printing of complex-shaped samples from Ti-6Al-4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3147, doi. 10.1007/s00170-019-04589-y

By:

Kalashnikov, K. N.;
Rubtsov, V. E.;
Savchenko, N. L.;
Kalashnikova, T. A.;
Osipovich, K. S.;
Eliseev, A. A.;
Chumaevskii, A. V.

Publication type:

Article

Ambient and non-ambient temperature depth-sensing indentation of Mg-Sm2O3 nanocomposites.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2947, doi. 10.1007/s00170-019-04583-4

By:

Haghshenas, M.;
Muhammad, M.;
Hasannaeimi, V.;
Mukherjee, S.;
Gupta, M.

Publication type:

Article

Sustainability of surface treatment of natural fibre in composite formation: challenges of environment-friendly option.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3183, doi. 10.1007/s00170-019-04581-6

By:

Adekomaya, Oludaisi;
Majozi, Thokozani

Publication type:

Article

The influence of welding polarity on mechanical properties, microstructure and residual stresses of gas tungsten arc welded AA5052.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3397, doi. 10.1007/s00170-019-04580-7

By:

Sarmast, Ardeshir;
Serajzadeh, Siamak

Publication type:

Article

A novel analytical filling time chart for design optimization of flip-chip underfill encapsulation process.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3521, doi. 10.1007/s00170-019-04573-6

By:

Ng, Fei Chong;
Ali, M. Yusuf Tura;
Abas, Aizat;
Khor, C. Y.;
Samsudin, Z.;
Abdullah, M. Z.

Publication type:

Article

Application of in situ post weld heat treatment using double pulse technology and its effect on microstructure and mechanical performance of resistance spot welded HSLA350 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3249, doi. 10.1007/s00170-019-04569-2

By:

Soomro, Imtiaz Ali;
Pedapati, Srinivasa Rao

Publication type:

Article

Effects of the die parameters on the self-piercing riveting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3353, doi. 10.1007/s00170-019-04567-4

By:

Liu, Yunpeng;
Li, Han;
Zhao, Huan;
Liu, Xianping

Publication type:

Article

Machinability of titanium alloy through laser machining: material removal and surface roughness analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3303, doi. 10.1007/s00170-019-04564-7

By:

Ahmed, Naveed;
Ahmad, Shafiq;
Anwar, Saqib;
Hussain, Amjad;
Rafaqat, Madiha;
Zaindin, Mazen

Publication type:

Article

Improvement of measurement resolution of a mechanical touch-trigger probe method for static radial runout measurements based on digital image correlation.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3127, doi. 10.1007/s00170-019-04557-6

By:

Zhao, Jianlong;
Sang, Yong;
Duan, Fuhai;
Ji, Xiaomeng

Publication type:

Article

Investigation on the material removal and surface roughness in ultraprecision machining of Al/B4C/50p metal matrix composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2815, doi. 10.1007/s00170-019-04553-w

By:

Niu, Zhichao;
Cheng, Kai

Publication type:

Article

Finite element analysis of ultrasonic assisted milling of SiCp/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3477, doi. 10.1007/s00170-019-04542-z

By:

Xiang, Daohui;
Shi, Zhanli;
Feng, Haoren;
Wu, Bangfu;
Zhang, Zhimeng;
Chen, Yanbin;
Niu, Xiaoxiao;
Zhao, Bo

Publication type:

Article

Effect of substrate material on the molten pool characteristics in selective laser melting of thin wall parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3221, doi. 10.1007/s00170-019-04540-1

By:

Liu, Shiwen;
Chang, Shijie;
Zhu, Haihong;
Yin, Jie;
Wang, Tingting;
Zeng, Xiaoyan

Publication type:

Article

Analysis of diamond nanomachining of contact lens polymers using molecular dynamics.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3067, doi. 10.1007/s00170-019-04536-x

By:

Liman, Muhammad Mukhtar;
Abou-El-Hossein, Khaled;
Abdulkadir, Lukman Niyi

Publication type:

Article

Optimal design of cathode based on iterative solution of multi-physical model in pulse electrochemical machining (PECM).

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3261, doi. 10.1007/s00170-019-04529-w

By:

Fang, Ming;
Chen, Yuanlong;
Jiang, Lijun;
Su, Yongsheng;
Liang, Yi

Publication type:

Article

An experimental investigation on surface layer damage in high-efficiency and low-damage grinding of rail by slotted CBN grinding wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2833, doi. 10.1007/s00170-019-04528-x

By:

Wu, Yao;
Shen, Mengbo;
Qu, Meina;
Xie, Guizhi;
Shang, Zhentao;
Jin, Tan

Publication type:

Article

Chatter detection in robotic drilling operations combining multi-synchrosqueezing transform and energy entropy.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2879, doi. 10.1007/s00170-019-04526-z

By:

Tao, Jianfeng;
Zeng, Hongwei;
Qin, Chengjin;
Liu, Chengliang

Publication type:

Article

Correction to: Offline simulation of path deviation due to joint compliance and hysteresis for robot machining.

Published in:

2019

By:

Cordes, Marcel;
Brunke, Lukas;
Hintze, Wolfgang

Publication type:

Correction Notice

Assessment of tool wear and microstructural alteration of the cutting tools in conventional and sustainable slot milling of Ti-6Al-4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2799, doi. 10.1007/s00170-019-04520-5

By:

Khatri, Ashutosh;
Jahan, Muhammd P.;
Ma, Jianfeng

Publication type:

Article

Internal and interface shear behaviors of cut and form tapping thread.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3463, doi. 10.1007/s00170-019-04519-y

By:

Swissi, Anis;
Soussi, Hela;
Abid, Majdi;
Krichen, Abdelkader

Publication type:

Article

Steel subsurface damage on plunge cylindrical grinding with sol-gel aluminum oxide grinding wheels.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2907, doi. 10.1007/s00170-019-04518-z

By:

Bordin, Fernando Moreira;
Weingaertner, Walter Lindolfo

Publication type:

Article

Instrumented clamping device and numerical simulations to study machining distortion.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3093, doi. 10.1007/s00170-019-04510-7

By:

Cherif, Iheb;
Cotton, Dominique;
Poulachon, Gerard;
Outeiro, Jose;
Brosse, Alexandre;
Rebelo Kornmeier, Joana

Publication type:

Article

A review of basic crystallography and x-ray diffraction applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3289, doi. 10.1007/s00170-019-04508-1

By:

Ameh, E. S.

Publication type:

Article

Coupled effects of vortex tube hybrid cooling with minimal quantity reinforced nanoparticle lubricants in turning NiTi alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3007, doi. 10.1007/s00170-019-04507-2

By:

Khalil, Ahmad Nabil Mohd;
Azmi, Azwan Iskandar;
Murad, Muhamad Nasir;
Annuar, Ahmad Faizal;
Ali, Mohammed Asyraf Mahboob

Publication type:

Article

A study on machining characteristics of nickel-based alloy with short electric arc milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2935, doi. 10.1007/s00170-019-04501-8

By:

Chen, Xiaokang;
Zhou, Jianping;
Wang, Kedian;
Xu, Yan;
Hu, Guoyu

Publication type:

Article

Temperature distribution of cubic boron nitride–coated cutting tools by finite element analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3197, doi. 10.1007/s00170-019-04498-0

By:

Tu, Luqiang;
Xu, Feng;
Wang, Xue;
Gao, Jiye;
Tian, Shuai;
Yuen, Muk-Fung;
Zuo, Dunwen

Publication type:

Article

Mathematical temperature model of sheet metal in friction stir incremental forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3105, doi. 10.1007/s00170-019-04494-4

By:

Li, Lihua;
Wang, Jin

Publication type:

Article

Vibration suppression of thin-walled workpiece milling using a time-space varying PD control method via piezoelectric actuator.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2843, doi. 10.1007/s00170-019-04493-5

By:

Wang, Shuyu;
Song, Qinghua;
Liu, Zhanqiang

Publication type:

Article

Effect of edge hone radius on plowing-induced plastic deformation in hard milling: analytical modeling and experimental validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3017, doi. 10.1007/s00170-019-04491-7

By:

Li, Binxun;
Zhang, Song;
Fang, Yujie

Publication type:

Article

Servo control optimization of micro discharge gap and its reasonable matching with scanning speed in servo scanning 3D micro EDM based on threshold control method.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3057, doi. 10.1007/s00170-019-04489-1

By:

Tong, Hao;
Liu, Xueling;
Pu, Yubin;
Li, Yong;
Liang, Wei;
Li, JunJie

Publication type:

Article

A stability prediction method research for milling processes based on implicit multistep schemes.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3271, doi. 10.1007/s00170-019-04487-3

By:

Wu, Yi;
You, Youpeng;
Jiang, Jianjun

Publication type:

Article

Investigation of the generation mechanism of the internal pressure of metal thin-walled tubes based on liquid impact forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3427, doi. 10.1007/s00170-019-04476-6

By:

Liu, Jianwei;
Yao, Xinqi;
Li, Yuhan;
Liang, Huiping;
Yang, Lianfa

Publication type:

Article

Influence of oxide layer on grinding quality in ELID grinding bearing outer ring raceway with workpiece-cathode.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3045, doi. 10.1007/s00170-019-04475-7

By:

Wang, Zhiqiang;
Ren, Chengzu;
Chen, Guang;
Deng, Xiaofan;
Ji, Chunhui

Publication type:

Article

A novel surface polishing method and its fundamental performance in ultra-fine polishing of wafer.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2919, doi. 10.1007/s00170-019-04473-9

By:

Cao, Jianguo;
Li, Jianyong;
Nie, Meng;
Zhu, Pengzhe;
Zhao, Chaoyue;
Zhang, Jingjing;
Xuan, Tong;
Xu, Jinhuan;
Li, Baozhen

Publication type:

Article

Formability and failure analyses of Al/SUS bilayer sheet in single point incremental forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2785, doi. 10.1007/s00170-019-04470-y

By:

Abd Ali, Raneen;
Chen, Wenliang;
Jin, Kai;
Bao, Yidong;
Hussein, Ahmed Waleed

Publication type:

Article

A review of important considerations in the compression molding process of short natural fiber composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3437, doi. 10.1007/s00170-019-04466-8

By:

Jaafar, Jamiluddin;
Siregar, Januar Parlaungan;
Tezara, Cionita;
Hamdan, Mohammad Hazim Mohamad;
Rihayat, Teuku

Publication type:

Article

A novel method for tool condition monitoring based on long short-term memory and hidden Markov model hybrid framework in high-speed milling Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3165, doi. 10.1007/s00170-019-04464-w

By:

Tao, Zhengrui;
An, Qinglong;
Liu, Gongyu;
Chen, Ming

Publication type:

Article

Ductility-oriented high-speed grinding of silicon carbide and process design for quality and damage control with higher efficiency.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2771, doi. 10.1007/s00170-019-04461-z

By:

Wu, Chongjun;
Guo, Weicheng;
Wu, Zhouping;
Wang, Qingxia;
Li, Beizhi

Publication type:

Article

Thermal damage control for dry grinding of MgO/CeO2 glass ceramic.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3387, doi. 10.1007/s00170-019-04460-0

By:

Qu, Meina;
Jin, Tan;
Xie, Guizhi;
Cai, Rui;
Yi, Jun;
Lu, Ange

Publication type:

Article

Study and implementation of a variable parameter modeling for die casting mold generation.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3543, doi. 10.1007/s00170-019-04457-9

By:

Dong, Yude;
Su, Fang;
Zhu, Guanqun;
Yang, Guanghui

Publication type:

Article

Optimized hatch space selection in double-scanning track selective laser melting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2989, doi. 10.1007/s00170-019-04456-w

By:

Lo, Yu-Lung;
Liu, Bung-Yo;
Tran, Hong-Chuong

Publication type:

Article

Investigation of the key process parameters in the hot forming of a shackle.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3209, doi. 10.1007/s00170-019-04451-1

By:

Cochet, J.;
Thuillier, S.;
Decultot, N.;
Manach, P. Y.

Publication type:

Article

An Improved Grey Wolf Optimizer Algorithm for Energy-Aware Service Composition in Cloud Manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3079, doi. 10.1007/s00170-019-04449-9

By:

Yang, Yefeng;
Yang, Bo;
Wang, Shilong;
Liu, Wei;
Jin, Tianguo

Publication type:

Article

Experimental and numerical investigation on axial hydro-forging sequence of 6063 aluminum alloy tube.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2869, doi. 10.1007/s00170-019-04447-x

By:

Sun, Lei;
Lin, Caiyuan;
Fan, Zhigang;
Li, Hang;
Yao, Shengjie;
Wang, Guodong;
Chu, Guannan

Publication type:

Article

Improving surface integrity aspects of AISI 316L in the context of bioimplant applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 2857, doi. 10.1007/s00170-019-04444-0

By:

Zahoor, Sadaf;
Saleem, Muhammad Qaiser;
Abdul-Kader, Walid;
Ishfaq, Kashif;
Shehzad, Adeel;
Ghani, Hafiz Usman;
Hussain, Amir;
Usman, Muhammad;
Dawood, Muhammad

Publication type:

Article

Study on manufacturing quality of micro-ultrasonic machining with force control.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3137, doi. 10.1007/s00170-019-04438-y

By:

He, Junfeng;
Guo, Zhongning;
Lian, Haishan;
Wang, Junjie;
Liu, Jiangwen;
Chen, Xiaolei

Publication type:

Article

A gesture- and head-based multimodal interaction platform for MR remote collaboration.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3031, doi. 10.1007/s00170-019-04434-2

By:

Wang, Peng;
Zhang, Shusheng;
Bai, Xiaoliang;
Billinghurst, Mark;
Zhang, Li;
Wang, Shuxia;
Han, Dechuan;
Lv, Hao;
Yan, Yuxiang

Publication type:

Article

Experimental investigation of the application of parameter inversion for residual stress adjustment in five-axis milling using an annular cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3233, doi. 10.1007/s00170-019-04431-5

By:

Huang, Kun;
Yang, Wenyu;
Gao, Yi;
Ye, Xiaoming

Publication type:

Article