Works matching IS 02504707 AND DT 2015 AND VI 38 AND IP 4

Results: 40

Effect of RF power and gas flow ratio on the growth and morphology of the PECVD SiC thin film s for MEMS applications.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1105, doi. 10.1007/s12034-015-0881-4

By:

PERI, BHAVANA;
BORAH, BIKASH;
DASH, RAJ

Publication type:

Article

Influence of solvent evaporation rate on crystallization of poly(vinylidene fluoride) thin films.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1093, doi. 10.1007/s12034-015-0894-z

By:

PRAMOD, K;
GANGINENI, R

Publication type:

Article

Mixed valence nanostructured MnO for supercapacitor applications.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 865, doi. 10.1007/s12034-015-0906-z

By:

BOSE, VIPIN;
BIJU, V

Publication type:

Article

Investigations on the microstructure and mechanical properties of multi-pass PCGTA welding of super-duplex stainless steel.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 837, doi. 10.1007/s12034-015-0915-y

By:

RAMKUMAR, K;
MISHRA, DEBIDUTTA;
THIRUVENGATAM, G;
SUDHARSAN, S;
MOHAN, TADIKONDA;
SAXENA, VIMAL;
PANDEY, RACHIT;
ARIVAZHAGAN, N

Publication type:

Article

Defect-assisted tuning of electroluminescence from p-GaN/n-ZnO nanorod heterojunction.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 901, doi. 10.1007/s12034-015-0920-1

By:

VIKAS, LAWRENCE;
SRUTHI, C;
JAYARAJ, MADAMBI

Publication type:

Article

Effect of zinc oxide nanoparticles synthesized by a precipitation method on mechanical and morphological properties of the CR foam.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1033, doi. 10.1007/s12034-015-0921-0

By:

SUNTAKO, RUDEERAT

Publication type:

Article

Effect of nanocrystalline surface of substrate on microstructure and wetting of PEO coatings.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 935, doi. 10.1007/s12034-015-0924-x

By:

MASIHA, H;
BAGHERI, H;
GHEYTANI, M;
ALIOFKHAZRAEI, M;
ROUHAGHDAM, A;
SHAHRABI, T

Publication type:

Article

Synthesis and analysis of Fe, Co and Ni: PEO + PVP blended polymer composite films for multifunctional polymer applications.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1015, doi. 10.1007/s12034-015-0925-9

By:

KUMAR, K;
REDDY, M;
VIJAYALAKSHMI, L;
RATNAKARAM, Y

Publication type:

Article

Influence of substrate and Ca substitution on multiferroic BiMnO thin films.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1099, doi. 10.1007/s12034-015-0926-8

By:

PUGAZHVADIVU, K;
BALAKRISHNAN, L;
TAMILARASAN, K

Publication type:

Article

Biosynthesis of Yttrium oxide nanoparticles using Acalypha indica leaf extract.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 945, doi. 10.1007/s12034-015-0927-7

By:

KANNAN, S;
SUNDRARAJAN, M

Publication type:

Article

Preparation and characterization of zinc and cobalt (II, III) oxides mixture and direct red 23 diazo dye heterogeneous photocatalysis.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1087, doi. 10.1007/s12034-015-0928-6

By:

PASCHOAL, GIOVANNI;
DA SILVA, MARCELO;
TAKASHIMA, KEIKO

Publication type:

Article

Synthesis, characterization and electrical properties of visible-light-driven Pt-ZnO/CNT.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 995, doi. 10.1007/s12034-015-0929-5

By:

MUJAHID, M

Publication type:

Article

Synthesis of acrylate guar-gum for delivery of bio-active molecules.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1025, doi. 10.1007/s12034-015-0930-z

By:

KUMAR, AJEET;
DE, ARNAB;
MOZUMDAR, SUBHO

Publication type:

Article

Growth kinetics of boride layers formed on 99.0% purity nickel.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1113, doi. 10.1007/s12034-015-0931-y

By:

GUNES, I;
KEDDAM, M;
CHEGROUNE, R;
OZCATAL, M

Publication type:

Article

Study of influence on micro-fabricated resistive switching organic ZrO array by C-AFM measurement.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1055, doi. 10.1007/s12034-015-0932-x

By:

LI, YING;
ZHAO, GAOYANG;
KOU, ZHIBO;
JIN, LONG;
WANG, YAJING

Publication type:

Article

Crystal structure of the quaternary compounds CuFeAlSe and CuFeGaSe from X-ray powder diffraction.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1061, doi. 10.1007/s12034-015-0933-9

By:

DELGADO, G;
MORA, A;
GRIMA-GALLARDO, P;
MUÑOZ, M;
DURÁN, S;
QUINTERO, M;
BRICEÑO, J

Publication type:

Article

Molecular transport behaviour of organic solvents through halloysite nanotubes filled ethylene-vinyl acetate copolymer.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 925, doi. 10.1007/s12034-015-0934-8

By:

PADHI, SUVENDU;
RAJU ACHARY, P;
NAYAK, NIMAI

Publication type:

Article

Bioactivity and mechanical behaviour of cobalt oxide-doped bioactive glass.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 957, doi. 10.1007/s12034-015-0936-6

By:

VYAS, VIKASH;
KUMAR, AREPALLI;
PRASAD, SUNIL;
SINGH, S;
PYARE, RAM

Publication type:

Article

Structural, electronic and magnetic properties of MnB.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1065, doi. 10.1007/s12034-015-0937-5

By:

MASROUR, R;
HLIL, E;
HAMEDOUN, M;
BENYOUSSEF, A;
MOUNKACHI, O;
MOUSSAOUI, H

Publication type:

Article

NiCrFeO ferrite nanoparticles and their composites with polypyrrole: synthesis, characterization and magnetic properties.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 915, doi. 10.1007/s12034-015-0938-4

By:

EL-GHAZZAWY, E;
ALAMRI, S

Publication type:

Article

Synthesis of iron/GAC catalyst for wastewater treatment using heterogeneous Fenton reaction.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1039, doi. 10.1007/s12034-015-0939-3

By:

LE, S;
NGO, T;
KHANITCHAIDECHA, W;
NAKARUK, A

Publication type:

Article

Detection of methane using multi-walled carbon nanotubes.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 909, doi. 10.1007/s12034-015-0940-x

By:

KATHIRVELAN, J;
VIJAYARAGHAVAN, R

Publication type:

Article

Photocatalytic generation of hydrogen under visible light on LaCuO.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1043, doi. 10.1007/s12034-015-0941-9

By:

LAHMAR, H;
TRARI, M

Publication type:

Article

Synthesis and evaluation of effective parameters in thermal expansion coefficient of LnSrCoMO (Ln = La,Nd and M = Mn,Fe) perovskite oxide.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1009, doi. 10.1007/s12034-015-0942-8

By:

HEYDARI, FATEMEH;
MAGHSOUDIPOUR, AMIR;
ALIZADEH, MASOUD;
KHAKPOUR, ZAHRA;
JAVAHERI, MASOUMEH

Publication type:

Article

Instrumental characterization of the smectite clay-gentamicin hybrids.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1069, doi. 10.1007/s12034-015-0943-7

By:

RAPACZ-KMITA, ALICJA;
STODOLAK-ZYCH, EWA;
ZIABKA, MAGDALENA;
ROZYCKA, AGNIESZKA;
DUDEK, MAGDALENA

Publication type:

Article

Effects of crystalline growth on corrosion behaviour of nanocrystalline NiAl coating.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 895, doi. 10.1007/s12034-015-0944-6

By:

TAVOOSI, M;
HEYDARI, H;
HOSSEINKHANI, A;
ADELIMOGHADDAM, B

Publication type:

Article

Biological synthesis and characterization of silver nanoparticles using Eclipta alba leaf extract and evaluation of its cytotoxic and antimicrobial potential.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 965, doi. 10.1007/s12034-015-0945-5

By:

PREMASUDHA, PARAMASIVAM;
VENKATARAMANA, MUDILI;
ABIRAMI, MARRIAPPAN;
VANATHI, PERIYASAMY;
KRISHNA, KADIRVELU;
RAJENDRAN, RAMASAMY

Publication type:

Article

Mechanical, dielectric and optical assessment of glass composites prepared using milling technique.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1003, doi. 10.1007/s12034-015-0947-3

By:

KAUR, GURBINDER;
PICKRELL, G;
KUMAR, V;
PANDEY, O;
SINGH, K;
ARYA, S

Publication type:

Article

Nanoscratch technique for aligning multiwalled carbon nanotubes synthesized by the arc discharge method in open air.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 875, doi. 10.1007/s12034-015-0948-2

By:

BERKMANS, A;
JAGANNATHAM, M;
HARIDOSS, PRATHAP

Publication type:

Article

Corrosion, haemocompatibility and bacterial adhesion behaviour of TiZrN-coated 316L SS for bioimplants.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 951, doi. 10.1007/s12034-015-0949-1

By:

KALIARAJ, GOBI;
VISHWAKARMA, VINITA;
RAMADOSS, ANANTHAKUMAR;
RAMACHANDRAN, D;
RABEL, ARUL

Publication type:

Article

Studies on the preparation and the photoelectrochemical properties of the nanoporous titania films attached with and without photosensitizer TCPP.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 847, doi. 10.1007/s12034-015-0950-8

By:

GONG, YUN-LAN;
LI, FEI-HUI;
LU, FEI;
DAI, CHANG

Publication type:

Article

VRH investigation of polyaniline-multiwalled carbon nanotube nanocomposite network.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 831, doi. 10.1007/s12034-015-0951-7

By:

IMANI, AMIN;
FARZI, GHOLAMALI

Publication type:

Article

Effect of milling time on the formation of carbon nanotube by mechano-thermal method.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 857, doi. 10.1007/s12034-015-0952-6

By:

EVİN, ERTAN;
GÜLER, ÖMER;
AKSOY, MUSTAFA;
GÜLER, SEVAL

Publication type:

Article

Effect of electron beam irradiation on the structure and optical properties of nickel oxide nanocubes.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 825, doi. 10.1007/s12034-015-0953-5

By:

SHEENA, P;
PRIYANKA, K;
SABU, N;
GANESH, S;
VARGHESE, THOMAS

Publication type:

Article

Sol-gel synthesis of palladium nanoparticles supported on reduced graphene oxide: an active electrocatalyst for hydrogen evolution reaction.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 887, doi. 10.1007/s12034-015-0954-4

By:

CHEKIN, FERESHTEH

Publication type:

Article

Reactive alumina-LaPO composite as machinable bioceramics.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 975, doi. 10.1007/s12034-015-0955-3

By:

BADOLIA, ABHISHEK;
SARKAR, RITWIK;
PAL, SUMIT

Publication type:

Article

Contribution of sodium dodecyl sulphate and sodium lauric acid in the one-pot synthesis of intercalated ZnAl-layered double hydroxides.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1079, doi. 10.1007/s12034-015-0956-2

By:

LV, FENGZHU;
MENG, ZILIN;
LI, PENGGANG;
ZHANG, YIHE;
LV, GUOCHENG;
ZHANG, QIAN;
ZHANG, ZHILEI

Publication type:

Article

Viscoelastic nature of Au nanoparticle-PDMS nanocomposite gels.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 817, doi. 10.1007/s12034-015-0957-1

By:

GUPTA, RITU;
NAGAMANASA, HIMA;
GANAPATHY, RAJESH;
KULKARNI, GIRIDHAR

Publication type:

Article

Conductivity studies on microwave synthesized glasses.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 985, doi. 10.1007/s12034-015-0958-0

By:

RAJIV, ASHA;
REDDY, M;
VISWANATHA, R;
UCHIL, JAYAGOPAL;
REDDY, C

Publication type:

Article

Study of the degree of deuteration on the microhardness of deuterated potassium dihydrogen phosphate crystals.

Published in:

Bulletin of Materials Science, 2015, v. 38, n. 4, p. 1049, doi. 10.1007/s12034-015-0858-3

By:

LIU, BAOAN;
SUN, SHAOTAO;
WANG, BO;
SUN, XUN;
WANG, ZHENGPING;
XU, XINGUANG

Publication type:

Article