Works matching IS 00323888 AND DT 2025 AND VI 65 AND IP 4

Results: 38

Quantitative assessment of dispersion stability and processing parameters in graphene‐enhanced unsaturated polyester resins: Effect of mixing techniques.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2133, doi. 10.1002/pen.27145

By:

Mazaheri Karvandian, Farnaz;
Hubert, Pascal

Publication type:

Article

Mechanical and thermal properties of polylactic acid blended with recycled polymethyl methacrylate.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2119, doi. 10.1002/pen.27141

By:

Dehghani, Samaneh;
Salehiyan, Reza;
Pholharn, Dutchanee;
Srithep, Yottha

Publication type:

Article

Investigation of the effects of atmospheric pressure plasma on polypropylene automotive bumper surface and its paintability with and without primer.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2106, doi. 10.1002/pen.27140

By:

Ayas, Kadir;
Karaca, Adem;
Çetinkaya, İsmail Hakan;
Kanbir, Öyküm;
Çavdar, Kadir

Publication type:

Article

Innovative hybrid membrane: Pioneering metal oxide framework for improved elimination of heavy metals from industrial wastewater.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2093, doi. 10.1002/pen.27139

By:

Gowayed, Salah M. H.;
Abdel‐Salam, Ahmed H.;
Nassef, Ehssan;
Morsy, Ashraf

Publication type:

Article

Carbon nanotubes and carbon fiber filled polyhexahydrotriazine composites: Assessing the tribological and mechanical properties.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2080, doi. 10.1002/pen.27138

By:

Li, Xiaoqian;
Jia, Xiaohua;
Song, Haojie;
Chen, Hao;
Sun, Shaojie

Publication type:

Article

Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2068, doi. 10.1002/pen.27134

By:

Abdenour, Chenni;
Eesaee, Mostafa;
Chabot, Bruno;
Barnabé, Simon;
Bley, Julien;
Tolnai, Balazs;
Njamen, Guy;
Nguyen‐Tri, Phuong

Publication type:

Article

Ultraviolet aging characteristics of waste laser printed paper reinforced high‐density polyethylene (HDPE) based composite materials.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2053, doi. 10.1002/pen.27133

By:

Zhang, Xiaolin;
Chang, Xing;
Di, Jingjing;
Xu, Long;
Cai, Bin;
Huang, Maocai

Publication type:

Article

Thermally stable CuO@ZIF‐8 nanomaterials for melt spinning to achieve efficient and persistent antibacterial polyester fibers.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2040, doi. 10.1002/pen.27132

By:

Lin, Bokun;
Cheng, Feiyang;
Yun, Fucheng;
Wei, Mengting;
Li, Yuanyuan;
Shi, Chen;
Han, Jian

Publication type:

Article

Evaluation of the physical–chemical properties of the blend of arrowroot starch and cactus mucilage.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1934, doi. 10.1002/pen.27124

By:

de Lima Silva, Ivo Diego;
Caetano, Viviane Fonseca;
de Andrade, Michelle Félix;
de Moraes Filho, Luiz Emílio Pessoa Timeni;
de Almeida, Yeda Medeiros Bastos;
do Nascimento Simões, Adriano;
Brito, Andréa Monteiro Santana Silva;
Maria Vinhas, Glória

Publication type:

Article

Development of sustainable polymer composite with agro‐industrial residue for biomedical applications.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1922, doi. 10.1002/pen.27123

By:

Ali, Shafahat;
Deiab, Ibrahim;
Pervaiz, Salman;
Eltaggaz, Abdelkrem

Publication type:

Article

Compressive behavior and shape memory performance of 4D‐printed metamaterial structures with different Poisson's ratio combinations.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2025, doi. 10.1002/pen.27131

By:

Wei, Yuanyuan;
Yuan, Shaoqing;
Shen, Xing;
Gong, Junjie;
Hao, Wenfeng

Publication type:

Article

4D‐printed TPU‐based magnetorheological elastomer using simplified feedstock preparation.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1977, doi. 10.1002/pen.27127

By:

Sukarman, Ahmad Fitri;
Mohd Yusuf, Shahir;
Mazlan, Saiful Amri;
Nordin, Nur Azmah;
Patel, Dipalkumar M.;
Johari, Mohd Aidy Faizal;
Lazim, Nurul Hakimah;
Kadir, Khairul Anwar Abdul

Publication type:

Article

Experimental and numerical analysis of the time and position dependence of the degree of cure, temperature distribution, and dynamic mechanical behavior of epoxy resin sheets cured with embedded Kanthal resistance wires.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1961, doi. 10.1002/pen.27126

By:

Kontaxis, Lykourgos C.;
Hoxha, Dorela;
Chatziathanasiou, Grigorios M.;
Patsidis, Anastasios C.;
Zaoutsos, Stefanos P.;
Papanicolaou, George C.

Publication type:

Article

Preparation and characterization of an acrylated‐coumarin‐containing photo‐crosslinked thiol‐ene network: Investigation of the free‐volume, thermal, UV, and photoluminescence properties.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1949, doi. 10.1002/pen.27125

By:

Uyumaz, Fatmanur;
Artuç, Gamze Özgül;
Pehlivan, Gamze;
Akdoğan, Ayça;
Yahşi, Uğur;
Tav, Cumali;
Bulut, Mustafa;
Kahraman, Memet Vezir

Publication type:

Article

Prediction mechanical properties of carbon fiber‐reinforced composites: A multiscale simulation framework based on bicomponent resin curing characteristics and interfacial properties.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2008, doi. 10.1002/pen.27130

By:

Ai, Fanrong;
Xie, Yangdong;
Liu, Donglei;
Gu, Shuojun;
Chen, Jiangwen;
Evsyukov, Sergei Alexandrovich;
Luo, Xin

Publication type:

Article

Enhancing biotextile applications with nanocomposite fibers: Molecular dynamics and interferometric analysis of the structural and mechanical properties of treated polypropylene.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1988, doi. 10.1002/pen.27128

By:

El‐Sayed, Nayera M.;
Ibrahim, Medhat A.;
El‐Bakary, Mohammed A.

Publication type:

Article

Rheological, microstructural, thermal and barrier properties of polylactide/polyethylene glycol/inulin/encapsulated cinnamon essential oil films.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1907, doi. 10.1002/pen.27122

By:

Ahmed, Jasim;
Joseph, Antony;
Ejaz, Mohammad;
Al‐Attar, Hasan

Publication type:

Article

Active surface modification of thermoplastic polyurethane‐oleic acid nanocomposite fibers through alkali hydrolysis.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1890, doi. 10.1002/pen.27120

By:

Karahaliloğlu, Zeynep;
Hazer, Baki

Publication type:

Article

A new generation of green rubber plasticizer: Study on the application of liquid polybutadiene rubber in green radial tread rubber.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1878, doi. 10.1002/pen.27119

By:

Zhao, Guangxin;
Yong, Zhanfu

Publication type:

Article

Effect of blown air temperature on morphology, phase structure and filtration efficiency of PVDF nanofibrous mats produced via electro‐blowing.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1868, doi. 10.1002/pen.27118

By:

Toptaş, Ali;
Çalışır, Mehmet Durmuş;
Tibatan, Mehmet Ali

Publication type:

Article

Self‐healing conducting composite electrodes derived from chemical recycling of PET plastic wastes for flexible supercapacitors.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1854, doi. 10.1002/pen.27117

By:

Wang, Yan;
Park, Beom‐su;
Vu, Van‐Phu;
Lee, Soo‐Hyoung

Publication type:

Article

The fabrication of conveyor rubber belt via bio‐oil obtained by rice husk pyrolysis.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1842, doi. 10.1002/pen.27116

By:

Paşa, Salih;
Gürer, Hüseyincan;
Alagöz, Oğuzhan

Publication type:

Article

High‐strength, tough, and hygrothermal aging‐resistant UV cationic‐cured epoxy resin improved by castor oil fatty acid.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1832, doi. 10.1002/pen.27114

By:

Fan, Yecheng;
Chen, Shiyu;
Xu, Zhaoran;
Shen, Peipei;
Guo, Xuewen;
Quan, Yiwu

Publication type:

Article

Research on the effects of contents and types of water‐soluble chitosan on properties of antibacterial natural latex foam.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1818, doi. 10.1002/pen.27113

By:

Li, Yi;
Xue, Yuanyuan;
Zhu, Yanchao;
Li, Xiaoye;
Gao, Shuang

Publication type:

Article

A study of polyethylene packaging films in presence of slip‐agent and anti‐block additives: A tale of surface and bulk crystallinities.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1800, doi. 10.1002/pen.27100

By:

Farsi, B.;
Mohseni, M.;
Asiaban, S.;
Farajollahi, Y.;
Mohammadi Ali Abadi, S. H.

Publication type:

Article

The impact of functionalized β‐CD surface‐coated ZnO@Mg–Al LDH on the properties of double network PVA hydrogel nanocomposites.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1779, doi. 10.1002/pen.27098

By:

Hajibeygi, Mohsen;
Kazemi, Najmeh

Publication type:

Article

Phenol formaldehyde‐flax fabric (PF‐F) hybrid composites reinforced with cellulose nanofiber (CNF)—mechanical, morphology, electrical conductivity, electronic structure, optoelectronic, and charge transfer properties.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1765, doi. 10.1002/pen.27096

By:

Ravindran, Lakshmipriya;
Joseph, Saju;
Ponnan, Sathiyanathan;
Kalarikkal, Nandakumar;
Sreekala, M. S.;
Thomas, Sabu

Publication type:

Article

Self‐healing and shape memory functions in elastomers: Recent advances and future prospectives.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1620, doi. 10.1002/pen.27092

By:

Sarkar, Srinmay;
S., Aiswarya;
Salaeh, Subhan;
Hirschberg, Valerian;
Banerjee, Shib Shankar

Publication type:

Article

Synthesis of nonlinear heteroaromatic donor–acceptor conjugated polymers: Structural, theoretical, electrochemical, and optical properties.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1752, doi. 10.1002/pen.27089

By:

Sunitha, M. S.;
Naik, Praveen;
Vishnumurthy, K. A.;
Adhikari, Airody Vasudeva

Publication type:

Article

Study on uniaxial quasi‐static compression properties of polyvinyl chloride foam based on temperature effect.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1733, doi. 10.1002/pen.27087

By:

Chen, Guotao;
Lyu, Yansong;
Li, Huadong;
Mei, Zhiyuan;
Zhang, Er

Publication type:

Article

Enhanced healability and weldability properties of vitrimers: Review article.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1607, doi. 10.1002/pen.27086

By:

Amin, Omar;
Ramzy, Amna;
Abou‐Elmagd, Wael S. I.;
Abdellatif, Mohamed Hazem

Publication type:

Article

Effect of functional monomers on the binding properties of molecularly imprinted polymers (MIPs) for selective recognition of dexamethasone.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1716, doi. 10.1002/pen.27082

By:

Adauto, Anais;
Khan, Sabir;
Vega‐Chacón, Jaime;
Sotomayor, Maria D. P. T.;
Picasso, Gino

Publication type:

Article

Impact of recyclate quality and functional barrier layers on the performance of LDPE in food packaging.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1702, doi. 10.1002/pen.27081

By:

Bandyopadhyay, Smarak;
Sharmin, Nusrat;
Radusin, Tanja;
Pettersen, Marit Kvalvåg

Publication type:

Article

Real‐time product weight estimation based on internal pressure monitoring in injection molding.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1693, doi. 10.1002/pen.27078

By:

Horváth, Szabolcs;
Kovács, József Gábor

Publication type:

Article

Improved starch adhesives for packaging and wood products.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1682, doi. 10.1002/pen.27077

By:

Lin, Wei‐Shu;
Catchmark, Jeffrey M.

Publication type:

Article

Porous nonwoven calendered fabrics (membranes) based on electrospun prepolymers of modified polyimides.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1665, doi. 10.1002/pen.27071

By:

Didenko, Andrei;
Vaganov, Gleb;
Nesterova, Anna;
Kamalov, Almaz;
Lavrentiev, Victor;
Popova, Elena;
Kraft, Vadim;
Anokhina, Tatyana;
Borisov, Ilya;
Abalov, Ivan;
Polotnyanshchikov, Konstantin;
Ivan'kova, Elena;
Malakhov, Alexandr;
Kudryavtsev, Vladislav

Publication type:

Article

Effect of different UV absorbers on the aging performance of poly (butylene adipate‐co‐terephthalate)/poly (propylene carbonate) degradable mulch films.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1655, doi. 10.1002/pen.27047

By:

Lin, Jun;
Meng, Yaming;
Chai, Xicun;
He, Chunxia

Publication type:

Article

Issue Information.

Published in:: Polymer Engineering & Science, 2025, v. 65, n. 4, p. 1601, doi. 10.1002/pen.26792
Publication type:: Article