Works matching IS 00323888 AND DT 2024 AND VI 64 AND IP 12

Results: 30

Faster and greater moisture curing ethylene‐silane copolymers with good shelf stabilities.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6129, doi. 10.1002/pen.26976

By:

Chaudhary, Bharat Indu;
Bawiskar, Santosh;
Sengupta, Saurav

Publication type:

Article

Development of acrylonitrile–butadiene–styrene (ABS)/natural fiber composite filaments for innovative 3D and 4D printing.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6037, doi. 10.1002/pen.26967

By:

Agrawal, Pankaj;
Lima, Priscila de Andrade;
da Cunha, Rafael Braga;
Cavalcanti, Shirley Nóbrega;
Filho, Válmer Azevedo de Sousa;
Bonfim, Ryan Lucas Pereira;
Brito, Gustavo de Figueiredo;
Cunha, Carlos Thiago Candido;
de Mélo, Tomás Jeferson Alves

Publication type:

Article

Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6247, doi. 10.1002/pen.26984

By:

Wang, Zhaogui;
Zhang, Baoyi;
Wang, Jinze

Publication type:

Article

The preparation of melt electrospun fiber containing tandospirone for drug sustained release.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6192, doi. 10.1002/pen.26980

By:

Ding, Xi;
Wang, Yuhang;
Wang, Yiming;
Li, Xudong;
Bubakir, Mahmoud M.;
Gao, Jixing;
Li, Feifei;
Pang, Ning;
Yang, Weimin;
Zhao, Rongsheng;
Li, Haoyi

Publication type:

Article

Biodegradable composites from poly(butylene adipate‐co‐terephthalate) with soybean protein isolate: Preparation, characterization, and performances.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6142, doi. 10.1002/pen.26977

By:

Ren, Mingtian;
Zhang, Yaqing;
Yi, Yazhou;
Wang, Huiling;
Wu, Qiangxian

Publication type:

Article

Investigation of mixed matrix membranes of graphene and acid‐treated graphene fillers in cellulose acetate and polyetherimide polymers for CO2 separation from biogas.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6265, doi. 10.1002/pen.26985

By:

Nayak, Bharat;
Kuncharam, Bhanu Vardhan Reddy

Publication type:

Article

An effective strategy for the continuous fabrication of melt‐spun sea‐island bicomponent fibers with structural regulation via stretching.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6234, doi. 10.1002/pen.26983

By:

Yu, Yan;
Chen, Ziye;
Zhang, Zhihao;
Jia, Guosheng;
He, Yujing;
Hu, Zexu;
Xiang, Hengxue;
Zhu, Liping;
Zhu, Meifang

Publication type:

Article

Effect of β nucleating agent and rotational shear on morphology and mechanical properties of polypropylene pipes.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6215, doi. 10.1002/pen.26982

By:

Abudurezhake, Aerman;
Yang, Minghao;
Gong, Jiawei;
Zhong, Ganji;
Li, Zhongming;
Fu, Qiang;
Gao, Xueqin

Publication type:

Article

Investigation of high‐strain rate behavior of shear thickening fluid encapsulated electrospun ultra‐high molecular weight polyethylene/high‐density polyethylene fiber composites by split‐Hopkinson pressure bar.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6204, doi. 10.1002/pen.26981

By:

Nayak, Prajesh;
Ghosh, Anup K.;
Bhatnagar, Naresh

Publication type:

Article

Nanosilica reinforced epoxy under super high strain rate loading.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6031, doi. 10.1002/pen.26966

By:

Wu, Zhibo;
Zhang, Chenxu;
Yin, Jianping;
Tang, Zhongbin;
Miao, Yinggang

Publication type:

Article

PLA/CB and HDPE/CB conductive polymer composites: Effect of polymer matrix structure on the rheological and electrical percolation threshold.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6014, doi. 10.1002/pen.26965

By:

Pê, Filipe R.;
Rodrigues, Túlio A. C. S.;
da Cunha, Rafael B.;
Cavalcanti, Shirley N.;
da Silva, Moacy P.;
Agrawal, Pankaj;
Brito, Gustavo F.;
de Mélo, Tomás J. A.

Publication type:

Article

Influence of exfoliation method of graphene on physical properties of graphene/High Density Polyethylene nanocomposites: Semiconductor‐like electrical conductivity, glass transition, and melting temperature.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6171, doi. 10.1002/pen.26979

By:

Farashiani, Morteza;
Shidpour, Reza;
Rajabi, Mohammad

Publication type:

Article

Fabrication, evaluation, and mechanism of TPU nanocomposites containing MWCNTs–Fe2O3 hybrid conductive nanofillers for selective VOC sensing applications.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6159, doi. 10.1002/pen.26978

By:

Yang, Shangke;
Yan, Lei;
Lin, Hailan;
Li, Xinkang;
Bian, Jun;
Ni, Keyang;
Zhao, Wei;
Zhang, Aiping;
Chen, Daiqiang

Publication type:

Article

Effects of varying mixing ratios of components A and B on optical liquid silicone rubber.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5998, doi. 10.1002/pen.26964

By:

Mayer, Dennis;
Heienbrock, Simon J.;
Weißer, Dennis F.;
Deckert, Matthias H.

Publication type:

Article

pH‐responsive bionanocomposite pectin grafted with dimethylaminoethyl methacrylate and acrylic acid copolymer along with silver nanoparticles for breast cancer drug delivery.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6115, doi. 10.1002/pen.26975

By:

Hashem, M. S.;
Sobh, Rokaya A.;
Abd El‐Ghaffar, M. A.

Publication type:

Article

Green ink revolution: Pioneering eco‐friendly 3D printing with vegetable oil‐derived inks.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5879, doi. 10.1002/pen.26974

By:

Thorbole, Anirudh;
Bodhak, Chandan;
Sahu, Pranabesh;
Gupta, Ram K.

Publication type:

Article

Development of high‐performance EGMA/EVA‐bamboo powder composite foams with enhanced stability, strengthening and toughening for sustainable applications.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5984, doi. 10.1002/pen.26963

By:

Hao, Jianxin;
Wang, Xinghuo;
Xie, Hugang;
Chen, Qiqi;
Chen, Xiaoqing;
Chen, Yukun

Publication type:

Article

Molecular design and application of low dielectric bismaleimide resin.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5859, doi. 10.1002/pen.26973

By:

Lu, Shaolin;
He, Qianyi;
Zeng, Xiangxing;
Ma, Zetong;
Yang, Yuzhao;
Chen, Xudong

Publication type:

Article

Optimizing the synthesis conditions of CaAl‐layered double hydroxide and poly (3‐hydroxybutyrate)/CaAl‐LDH nanocomposite for potential use in antibacterial drug delivery.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6099, doi. 10.1002/pen.26972

By:

Singh, Rinki;
Kumari, Satti Venu Gopala;
Pakshirajan, Kannan;
Pugazhenthi, G.

Publication type:

Article

Bamboo powders effectively reinforcing the modulus of PBAT composites and creep resistance.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6088, doi. 10.1002/pen.26971

By:

Ye, Xiaojing;
Ye, Yanpeng;
Han, Yulong;
Ren, Fengmei;
Ma, Haihong;
Xu, Weibing;
Zhou, Zhengfa

Publication type:

Article

Influence of montmorillonite and attapulgite clays on the production of polyamide 6 membranes via hot‐press fusion method.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6077, doi. 10.1002/pen.26970

By:

Campos, Aline de Almeida;
Dias, Rafael Agra;
Araujo, Bruna Aline;
dos Santos Filho, Edson Antônio;
Moreira, Francys Kley Vieira;
Marini, Juliano;
Beatrice, Cesar Augusto Gonçalves;
Medeiros, Vanessa da Nóbrega;
Pessan, Luiz Antonio;
Araújo, Edcleide Maria

Publication type:

Article

Preparation, characterization, and antibacterial evaluation of novel biodegradable self‐healing film based on fish collagen cross‐linked carboxymethyl cellulose.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6063, doi. 10.1002/pen.26969

By:

Zallaghi, Mahsa;
Esmkhani, Maryam;
Mirzaei, Akbar;
Javanshir, Shahrzad

Publication type:

Article

Epoxy composite dust reinforced novel polypropylene composites: An eco‐friendly approach toward sustainable resource management.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 6054, doi. 10.1002/pen.26968

By:

Sharma, Hitesh;
Gairola, Sandeep;
Misra, Joy Prakash;
Singh, Inderdeep

Publication type:

Article

An investigation on the wear properties of the photocurable components produced by additive manufacturing for dentistry applications: Combined influences of UV exposure time, building direction, and sliding loads.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5940, doi. 10.1002/pen.26960

By:

Bolat, Çağın;
Salmaz, Serkan

Publication type:

Article

Methods for atmospheric pressure plasma modification of chitosan surface to improve biocompatibility.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5959, doi. 10.1002/pen.26961

By:

Kamalov, Almaz;
Endiiarova, Ekaterina;
Osipov, Artem;
Kolbe, Konstantin;
Nashchekina, Yuliya;
Smirnova, Natalia

Publication type:

Article

Study on the UV aging resistance of ZnO‐modified epoxy resin by experiments and MD simulation.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5903, doi. 10.1002/pen.26957

By:

Zhang, Hao;
Chu, Xiaocheng;
Ding, Qingjun;
Zhao, Gai;
Li, Huafeng

Publication type:

Article

Blow molding of mechanically recycled post‐consumer rigid polyethylene packaging waste.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5968, doi. 10.1002/pen.26962

By:

Boz Noyan, Ezgi Ceren;
Boldizar, Antal

Publication type:

Article

Effect of hardness on the foaming behavior, surface quality, and mechanical properties of thermoplastic polyurethane foams by chemical foaming injection molding.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5929, doi. 10.1002/pen.26959

By:

Xing, Jinfu;
He, Li;
Jiang, Tuanhui

Publication type:

Article

Enhancing tensile properties of polymer‐based triply periodic minimal surface metamaterial structures: Investigating the impact of post‐curing time and layer thickness via response surface methodology.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5915, doi. 10.1002/pen.26958

By:

Pehlivan, Fatih

Publication type:

Article

Issue Information.

Published in:: Polymer Engineering & Science, 2024, v. 64, n. 12, p. 5855, doi. 10.1002/pen.26368
Publication type:: Article

Works matching IS 00323888 AND DT 2024 AND VI 64 AND IP 12

Faster and greater moisture curing ethylene‐silane copolymers with good shelf stabilities.

Development of acrylonitrile–butadiene–styrene (ABS)/natural fiber composite filaments for innovative 3D and 4D printing.

Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites.

The preparation of melt electrospun fiber containing tandospirone for drug sustained release.

Biodegradable composites from poly(butylene adipate‐co‐terephthalate) with soybean protein isolate: Preparation, characterization, and performances.

Investigation of mixed matrix membranes of graphene and acid‐treated graphene fillers in cellulose acetate and polyetherimide polymers for CO<sub>2</sub> separation from biogas.

An effective strategy for the continuous fabrication of melt‐spun sea‐island bicomponent fibers with structural regulation via stretching.

Effect of β nucleating agent and rotational shear on morphology and mechanical properties of polypropylene pipes.

Investigation of high‐strain rate behavior of shear thickening fluid encapsulated electrospun ultra‐high molecular weight polyethylene/high‐density polyethylene fiber composites by split‐Hopkinson pressure bar.

Nanosilica reinforced epoxy under super high strain rate loading.

PLA/CB and HDPE/CB conductive polymer composites: Effect of polymer matrix structure on the rheological and electrical percolation threshold.

Influence of exfoliation method of graphene on physical properties of graphene/High Density Polyethylene nanocomposites: Semiconductor‐like electrical conductivity, glass transition, and melting temperature.

Fabrication, evaluation, and mechanism of TPU nanocomposites containing MWCNTs–Fe<sub>2</sub>O<sub>3</sub> hybrid conductive nanofillers for selective VOC sensing applications.

Effects of varying mixing ratios of components A and B on optical liquid silicone rubber.

pH‐responsive bionanocomposite pectin grafted with dimethylaminoethyl methacrylate and acrylic acid copolymer along with silver nanoparticles for breast cancer drug delivery.

Green ink revolution: Pioneering eco‐friendly 3D printing with vegetable oil‐derived inks.

Development of high‐performance EGMA/EVA‐bamboo powder composite foams with enhanced stability, strengthening and toughening for sustainable applications.

Molecular design and application of low dielectric bismaleimide resin.

Optimizing the synthesis conditions of CaAl‐layered double hydroxide and poly (3‐hydroxybutyrate)/CaAl‐LDH nanocomposite for potential use in antibacterial drug delivery.

Bamboo powders effectively reinforcing the modulus of PBAT composites and creep resistance.

Influence of montmorillonite and attapulgite clays on the production of polyamide 6 membranes via hot‐press fusion method.

Preparation, characterization, and antibacterial evaluation of novel biodegradable self‐healing film based on fish collagen cross‐linked carboxymethyl cellulose.

Epoxy composite dust reinforced novel polypropylene composites: An eco‐friendly approach toward sustainable resource management.

An investigation on the wear properties of the photocurable components produced by additive manufacturing for dentistry applications: Combined influences of UV exposure time, building direction, and sliding loads.

Methods for atmospheric pressure plasma modification of chitosan surface to improve biocompatibility.

Study on the UV aging resistance of ZnO‐modified epoxy resin by experiments and MD simulation.

Blow molding of mechanically recycled post‐consumer rigid polyethylene packaging waste.

Effect of hardness on the foaming behavior, surface quality, and mechanical properties of thermoplastic polyurethane foams by chemical foaming injection molding.

Enhancing tensile properties of polymer‐based triply periodic minimal surface metamaterial structures: Investigating the impact of post‐curing time and layer thickness via response surface methodology.

Issue Information.