Works in Polymer Engineering & Science, 2022, Vol 62, Issue 9

Results: 31

Origin of the broad endothermic peak observed at low temperatures for polystyrene and metals in Flash differential scanning calorimetry*.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 3059, doi. 10.1002/pen.26102

By:

Pallaka, Madhusudhan R.;
Bari, Rozana;
Simon, Sindee L.

Publication type:

Article

Preparation of silica/natural rubber composites by foaming predispersion combined with gas‐phase‐assisted spray technology.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 3037, doi. 10.1002/pen.26083

By:

Xiao, Yao;
Yan, Lizhi;
Xu, Zhenchun;
Sui, Zhihua;
Xue, Junxiu;
Zhu, Donglin;
Bian, Huiguang;
Wang, Chuansheng

Publication type:

Article

Mechanical properties of heat‐treated polypropylene separators for Lithium‐ion batteries.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 3049, doi. 10.1002/pen.26084

By:

Moghim, Mohammad Hadi;
Nahvibayani, Ashkan;
Eqra, Rahim

Publication type:

Article

Novel thermally insulated ultra‐lightweight fireproof and high impact resistance advanced hybrid composite.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 3026, doi. 10.1002/pen.26082

By:

Vinodhini, Jennifer;
K, Sudheendra;
Bhowmik, Shantanu;
AR, Srikrishnan;
D. Trivedi, Prakash;
C. Zaveri, Jaimin;
Kundu, Amit

Publication type:

Article

Synthesis and characterization of functionalized polyvinylidene fluoride (PVDF) and the high temperature catalytic activity of PVDF‐g‐MAH/V2O5 nanocomposite toward transesterification reaction.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 3010, doi. 10.1002/pen.26081

By:

Thamizhlarasan, Anbarasan;
Vignesh, Ramamoorthi;
Anbarasan, Ramasamy;
Tung, Kuo‐Lun

Publication type:

Article

Effect of TiO2 modified with dopamine and Silane coupling agent on the electrical properties of PMIA insulation paper.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2998, doi. 10.1002/pen.26080

By:

Fang‐cheng, Lü;
Mei‐ying, Zhu;
Jing‐xuan, Song;
Xiu‐quan, Lu;
Hao‐ou, Ruan;
Qing, Xie;
Sheng‐hui, Wang;
Sheng‐dong, Yin;
Xiao‐bin, Chang

Publication type:

Article

Zinc‐trimesic acid metal–organic framework incorporated sulfonated poly(ether ether sulfone) based polymer composite membranes for fuel cell.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2986, doi. 10.1002/pen.26079

By:

Kulasekaran, Poonkuzhali;
Maria Mahimai, Berlina;
Sivasubramanian, Gandhimathi;
Pushparaj, Hemalatha;
Deivanayagam, Paradesi

Publication type:

Article

The absolute heat capacity of polymer grafted nanoparticles using fast scanning calorimetry*.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2977, doi. 10.1002/pen.26078

By:

Sakib, Nazam;
Koh, Yung P.;
Simon, Sindee L.

Publication type:

Article

The reinforcing effect of lignin‐containing cellulose nanofibrils in the methacrylate composites produced by stereolithography.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2968, doi. 10.1002/pen.26077

By:

Feng, Xinhao;
Yang, Zhaozhe;
Wang, Siqun;
Wu, Zhihui

Publication type:

Article

Preparation and evaluation of modified bisphenol‐A‐glycidyl methacrylate resin dental adhesive to zirconia.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2958, doi. 10.1002/pen.26076

By:

Wang, Yuhe;
Luo, Shao‐Hua;
Zhang, Xian;
Wang, Zihan;
Qi, Hongfei;
Yan, Shengxue;
Wang, Xuan;
Wang, Luoxuan;
Wu, Haiyan;
Chen, Yingying

Publication type:

Article

Production of bacterial cellulose with antioxidant additive from grape residue with promising cosmetic applications.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2826, doi. 10.1002/pen.26065

By:

Nascimento, Helenise A.;
Amorim, Julia D. P.;
M. Filho, Luiz E. P. T. de;
Costa, Andrea Fernanda S.;
Sarubbo, Leonie A.;
Napoleão, Daniella Carla;
Maria Vinhas, Glória

Publication type:

Article

Thickening behavior of thermo‐associative water soluble multiblock copolymers under redox RAFT polymerization.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2932, doi. 10.1002/pen.26074

By:

Maldonado‐Textle, Hortensia;
Jiménez‐Regalado, Enrique Javier;
St Thomas, Claude

Publication type:

Article

Effects of plastic deformation and failure on the folding behavior of non‐crosslinked ethylene propylene diene terpolymer composites.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2922, doi. 10.1002/pen.26073

By:

Tobusawa, Taiki;
Akasaka, Shuichi;
Asai, Shigeo

Publication type:

Article

Molecular characteristics, mechanism of synthesis, adhesive properties of graft copolymer of chloroprene rubber with acrylic acid.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2909, doi. 10.1002/pen.26072

By:

Rafikov, Adham Salimovich;
Khodjaeva, Saodat Adilbekovna;
Karimov, Sardorbek Khodjibaevich;
Ibragimov, Abdusattar Turgunivich

Publication type:

Article

Enhanced properties of poly(silylene phenylether arylacetylene) by a side cyano group.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2900, doi. 10.1002/pen.26071

By:

Li, Chuan;
Ma, Manping;
Tang, Junkun;
Yuan, Qiaolong;
Huang, Farong

Publication type:

Article

Fabrication and characteristics of flexible thermoplastic polyurethane filament for fused deposition modeling three‐dimensional printing.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2947, doi. 10.1002/pen.26075

By:

Shin, Eun Joo;
Park, Yuyoung;
Jung, Yang Sook;
Choi, Hyeong Yeol;
Lee, Sunhee

Publication type:

Article

Structure elucidation and toxicological evaluation of cyclic Polyethersulfone oligomers present in extracts of membrane filters.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2817, doi. 10.1002/pen.26064

By:

Menzel, Roberto;
Maier, Tanja;
Täuscher, Eric;
von Mertz, Franziska Spruner;
Freiberger, Emma;
Golz, Christopher;
Fruth, Lothar;
Pahl, Ina;
Hauk, Armin

Publication type:

Article

Improved tribological performance of epoxy composites containing core–shell PE wax@SiO2 nanoparticles.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2863, doi. 10.1002/pen.26068

By:

Zhao, Gengrui;
Li, Jiajun;
Wang, Honggang;
Chen, Shengsheng;
Li, Zhenyu;
Lv, Bo;
Liu, Wenguang;
Gao, Gui;
Ren, Junfang;
Yang, Dongya

Publication type:

Article

The sensitivity of the behavior of water penetrating polypropylene matrix composites on short‐shot process parameters.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2855, doi. 10.1002/pen.26067

By:

Yu, Zhong;
Huang, Yi‐Bin;
Liu, He‐Sheng;
Zhang, Kai;
Shang‐Guan, Yuan‐Shuo;
Kuang, Tang‐Qing;
Jiang, Shi‐Yu

Publication type:

Article

Synergic effect of temperature and alkalinity on the long‐term durability of pure vinyl ester.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2840, doi. 10.1002/pen.26066

By:

Wang, Peng;
Ke, Lin‐yu‐wen;
Wu, Haoliang;
Leung, Christopher K. Y.

Publication type:

Article

Incorporation of amino‐functionalized ZnO nanoparticles into polycarbonate/polyvinyl alcohol thin‐film membrane for enhanced water treatment.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2891, doi. 10.1002/pen.26070

By:

Etemadi, Habib;
Khezraqa, Homayun;
Hermani, Milad

Publication type:

Article

Study on supercritical CO2‐assisted modification of aramid pulp and properties of its reinforced EPDM composites.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2878, doi. 10.1002/pen.26069

By:

Li, Biao;
Kong, Haijuan;
Qin, Minglin;
Ding, Haiquan;
Du, Xue;
Song, Jiyin;
Sun, Xiaoling;
Yu, Muhuo

Publication type:

Article

Imparting low dielectric constant and high toughness to polyimide via physical blending with trifluoropropyl polyhedral oligomeric silsesquioxane.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2809, doi. 10.1002/pen.26063

By:

Chen, Zhigeng;
Zhang, Ying;
Zhao, Jianqing;
Mo, Yueqi;
Liu, Shumei

Publication type:

Article

Functionalized biomaterials based on poly(vinyl alcohol) and chitosan as a vehicle for controlled release of cabreuva essential oil.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2793, doi. 10.1002/pen.26062

By:

Lamarra, Javier;
Rivero, Sandra;
Pinotti, Adriana

Publication type:

Article

Screening of mixing parameters based on their significance on the extent of silanization and energy consumption of silica‐filled S‐SBR elastomer compounds for fuel‐saving tyre application.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2779, doi. 10.1002/pen.26061

By:

Neethirajan, Jeevanandham;
Natarajan, Tamil Selvan;
Dayalan, Sathish;
Patel, Bharat;
Rajasekar, V.;
Kuriakose, Job;
Rama Krishnan, S.;
Naskar, Kinsuk

Publication type:

Article

Synthesis and property of EPEG‐based polycarboxylate ether superplasticizers via RAFT polymerization.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2769, doi. 10.1002/pen.26060

By:

Chen, Xiaodong;
Tang, Xinde;
Zhang, Cuizhen;
Lu, Xiao;
Guo, Haichao;
Li, Xuefan;
Pang, Laixue;
Yang, Yong;
Dong, Fuying

Publication type:

Article

Investigation of chemical degradation and water states in the graft‐type polymer electrolyte membranes.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2757, doi. 10.1002/pen.26059

By:

Hieu, Dinh Tran Trong;
Hao, Lam Hoang;
Long, Tran Hoang;
Van Tien, Vo;
Cuong, Nguyen Tien;
Van Man, Tran;
Loan, Truong Thi Hong;
Tap, Tran Duy

Publication type:

Article

Design, preparation, and characterization of silk fibroin/carboxymethyl cellulose wound dressing for skin tissue regeneration applications.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2741, doi. 10.1002/pen.26057

By:

Farshi, Paniz;
Salarian, Reza;
Rabiee, Mohammad;
Alizadeh, Sanaz;
Gholipourmalekabadi, Mazaher;
Ahmadi, Sepideh;
Rabiee, Navid

Publication type:

Article

Molecular design of monomers by considering the dielectric constant and stability of the polymer.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2750, doi. 10.1002/pen.26058

By:

Taniwaki, Hiroaki;
Kaneko, Hiromasa

Publication type:

Article

Fabrication and characterization of novel polyurethane Encapsulant with excellent underwater acoustic transparency and hydrophobicity.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2731, doi. 10.1002/pen.26056

By:

Li, Zhihua;
Zhang, Yidan;
Yan, Shuxuan;
Zhang, Yibo;
Liu, Mengmei;
Gong, Liangjun

Publication type:

Article

Issue Information.

Published in:: Polymer Engineering & Science, 2022, v. 62, n. 9, p. 2727, doi. 10.1002/pen.25729
Publication type:: Article

Works in Polymer Engineering & Science, 2022, Vol 62, Issue 9

Origin of the broad endothermic peak observed at low temperatures for polystyrene and metals in Flash differential scanning calorimetry*.

Preparation of silica/natural rubber composites by foaming predispersion combined with gas‐phase‐assisted spray technology.

Mechanical properties of heat‐treated polypropylene separators for Lithium‐ion batteries.

Novel thermally insulated ultra‐lightweight fireproof and high impact resistance advanced hybrid composite.

Synthesis and characterization of functionalized polyvinylidene fluoride (PVDF) and the high temperature catalytic activity of PVDF‐g‐MAH/V<sub>2</sub>O<sub>5</sub> nanocomposite toward transesterification reaction.

Effect of TiO<sub>2</sub> modified with dopamine and Silane coupling agent on the electrical properties of PMIA insulation paper.

Zinc‐trimesic acid metal–organic framework incorporated sulfonated poly(ether ether sulfone) based polymer composite membranes for fuel cell.

The absolute heat capacity of polymer grafted nanoparticles using fast scanning calorimetry*.

The reinforcing effect of lignin‐containing cellulose nanofibrils in the methacrylate composites produced by stereolithography.

Preparation and evaluation of modified bisphenol‐A‐glycidyl methacrylate resin dental adhesive to zirconia.

Production of bacterial cellulose with antioxidant additive from grape residue with promising cosmetic applications.

Thickening behavior of thermo‐associative water soluble multiblock copolymers under redox RAFT polymerization.

Effects of plastic deformation and failure on the folding behavior of non‐crosslinked ethylene propylene diene terpolymer composites.

Molecular characteristics, mechanism of synthesis, adhesive properties of graft copolymer of chloroprene rubber with acrylic acid.

Enhanced properties of poly(silylene phenylether arylacetylene) by a side cyano group.

Fabrication and characteristics of flexible thermoplastic polyurethane filament for fused deposition modeling three‐dimensional printing.

Structure elucidation and toxicological evaluation of cyclic Polyethersulfone oligomers present in extracts of membrane filters.

Improved tribological performance of epoxy composites containing core–shell PE wax@SiO<sub>2</sub> nanoparticles.

The sensitivity of the behavior of water penetrating polypropylene matrix composites on short‐shot process parameters.

Synergic effect of temperature and alkalinity on the long‐term durability of pure vinyl ester.

Incorporation of amino‐functionalized ZnO nanoparticles into polycarbonate/polyvinyl alcohol thin‐film membrane for enhanced water treatment.

Study on supercritical CO<sub>2</sub>‐assisted modification of aramid pulp and properties of its reinforced EPDM composites.

Imparting low dielectric constant and high toughness to polyimide via physical blending with trifluoropropyl polyhedral oligomeric silsesquioxane.

Functionalized biomaterials based on poly(vinyl alcohol) and chitosan as a vehicle for controlled release of cabreuva essential oil.

Screening of mixing parameters based on their significance on the extent of silanization and energy consumption of silica‐filled S‐SBR elastomer compounds for fuel‐saving tyre application.

Synthesis and property of EPEG‐based polycarboxylate ether superplasticizers via RAFT polymerization.

Investigation of chemical degradation and water states in the graft‐type polymer electrolyte membranes.

Design, preparation, and characterization of silk fibroin/carboxymethyl cellulose wound dressing for skin tissue regeneration applications.

Molecular design of monomers by considering the dielectric constant and stability of the polymer.

Fabrication and characterization of novel polyurethane Encapsulant with excellent underwater acoustic transparency and hydrophobicity.

Issue Information.