Works in Polymer Engineering & Science, 2022, Vol 62, Issue 6

Results: 31

The effect of the titanium dioxide nanoparticles on the morphology and degradation of polyamide 6 prepared by anionic ring‐opening polymerization.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2079, doi. 10.1002/pen.25990

By:

Semperger, Orsolya Viktória;
Osváth, Zsófia;
Pásztor, Szabolcs;
Suplicz, András

Publication type:

Article

Effects of humidity and temperature on hydrolytic degradation of polydioxanone.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2070, doi. 10.1002/pen.25989

By:

Kang, Ha Jeong;
Song, Young Seok

Publication type:

Article

Smooth‐rough asymmetric PLGA structure made of dip coating membrane and electrospun nanofibrous scaffolds meant to be used for guided tissue regeneration of periodontium.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2061, doi. 10.1002/pen.25988

By:

Nitti, Paola;
Palazzo, Barbara;
Gallo, Nunzia;
Scalera, Francesca;
Sannino, Alessandro;
Gervaso, Francesca

Publication type:

Article

Preparation and characteristics of polymer matrix composite coatings with low infrared emissivity and high‐temperature resistance.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1941, doi. 10.1002/pen.25977

By:

Wang, Yibo;
Li, Xiangyu;
Wang, Chenghao;
Jian, Xigao;
Zong, Lishuai;
Wang, Jinyan

Publication type:

Article

Thermal‐induced dielectric response in mechanically durable polyvinylidene fluoride–kapok encapsulated polyethylene glycol composite films.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1999, doi. 10.1002/pen.25982

By:

Gong, Yutie;
Li, Zhenzhen;
Li, Hairong;
Wu, Wenqi;
Pei, Xianglin;
Tu, Junyang;
Zhou, Weijie;
Jiang, Ming;
Gong, Wei

Publication type:

Article

Elastic composites fabricating for electromagnetic interference shielding based on MWCNTs and Fe3O4 unique distribution in immiscible NR/NBR blends.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2019, doi. 10.1002/pen.25985

By:

Zhang, Xinjin;
Fan, Chunyan;
Ma, Yongjie;
Zhao, Hongying;
Sui, Jing;
Liu, Jiwen;
Sun, Chong

Publication type:

Article

The effects of nanoclay and carbon nanotube co‐addition on properties of an amorphous polyamide/maleated styrene‐ethylene‐co‐butylene‐styrene blend.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2008, doi. 10.1002/pen.25984

By:

Damman, Suzana;
Steffen, Teresa Tromm;
Becker, Daniela

Publication type:

Article

Mechanically robust sodium alginate/cellulose nanofibers/polyethyleneimine composite aerogel for effective removal of hexavalent chromium and anionic dyes.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1927, doi. 10.1002/pen.25976

By:

Xie, Qian;
Zou, Yuke;
Wang, Yazhou;
Wang, Haibo;
Du, Zongliang;
Cheng, Xu

Publication type:

Article

Superior EMI shielding effectiveness with enhanced electrical conductivity at low percolation threshold of flexible novel ethylene methyl acrylate/single‐walled carbon nanotube nanocomposites.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2047, doi. 10.1002/pen.25987

By:

Sit, Subhashis;
Chakraborty, Goutam;
Das, Narayan Chandra

Publication type:

Article

Synthesis and characterization of block copolymers of styrene‐maleic acid with acrylamide and N,N‐dimethylacrylamide.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 2031, doi. 10.1002/pen.25986

By:

Khaojanta, Thidarat;
Kalaithong, Wichaya;
Somsunan, Runglawan;
Punyamoonwongsa, Patchara;
Mahomed, Anisa;
Topham, Paul D.;
Tighe, Brian J.;
Molloy, Robert

Publication type:

Article

Excellent effect of lubrication performance of chitosan/polyethylene glycol/palygorskite as water‐based lubricating additive on 304 stainless steel and polymer pairs.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1974, doi. 10.1002/pen.25980

By:

Liu, Tao;
Lu, Hailin;
Li, Chengzhi;
Chen, Lu;
Feng, Ziqin

Publication type:

Article

Composite waterborne polyurethane reinforced with silane modified lignin as an adhesive between polypropylene decorative films and wood‐based panels.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1950, doi. 10.1002/pen.25978

By:

Chang, Liang;
Luo, Shupin;
Gao, Li;
Ren, Yiping;
Tang, Qiheng;
Chen, Yongping

Publication type:

Article

Bio‐based polylactic acid or epoxy natural rubber thermoplastic vulcanizates with dual interfacial compatibilization networks.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1987, doi. 10.1002/pen.25981

By:

Xu, Xinhu;
Ma, Lifeng;
Liu, Congchao

Publication type:

Article

A composite electrode of 2D‐Ti3C2 (MXene) and polyemeraldine salt of polyaniline for supercapacitor with high areal capacitance.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1918, doi. 10.1002/pen.25975

By:

Sarma, Yallapragada Sai Swaroop;
Gupta, Nisha;
Bhattacharya, Pallab

Publication type:

Article

Characterization methods for strain‐induced damage in polypropylene.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1959, doi. 10.1002/pen.25979

By:

Wiener, Johannes;
Preissegger, Florian;
Plank, Bernhard;
Arbeiter, Florian;
Kolednik, Otmar;
Pinter, Gerald

Publication type:

Article

Newsprint microcrystalline fibers reinforced styrene butadiene rubber as a low thermal conducting material: Effect of electron beam irradiation and fiber content.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1907, doi. 10.1002/pen.25974

By:

El‐Nemr, Khaled F.;
Ali, Magdy A.;
Gad, Yasser H.;
Gabr, Eman M.

Publication type:

Article

Effect of OHMIC heating and ultrasound on functional properties of biodegradable gelatin‐based films.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1890, doi. 10.1002/pen.25973

By:

de Vargas, Victoria Hermes;
Flôres, Simone Hickmann;
Mercali, Giovana Domeneghini;
Marczak, Ligia Damasceno Ferreira

Publication type:

Article

Improved melt strength and processability of impact copolymer polypropylene by introducing long‐chain branching via reactive extrusion with "ene" functionalized dendrimer.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1876, doi. 10.1002/pen.25972

By:

Jaisingh, Aanchal;
Goel, Vishal;
Kapur, Gurpreet Singh;
Nebhani, Leena

Publication type:

Article

Effects of residual wax content on the thermal, rheological, and mechanical properties of high‐density polyethylene.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1867, doi. 10.1002/pen.25971

By:

Gudiño Rivera, Javier;
Hernández Gámez, José Francisco;
Borjas Ramos, José Javier;
Salinas Hernández, Myrna;
Sánchez Martínez, Deidré Itandehui

Publication type:

Article

Study on preparation of highly dispersed graphite composite expandable polystyrene foam by homogeneous dissolution‐suspension polymerization with waste polystyrene.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1859, doi. 10.1002/pen.25970

By:

Zhao, Zhi Feng;
Wang, Xin Lei;
Wang, Jia;
Li, Junfeng

Publication type:

Article

Poly(ethylene terephthalate) phase inversion membranes: Thermodynamics and effects of a poor solvent on the membrane characteristics.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1847, doi. 10.1002/pen.25969

By:

Cadore, Ígor Renz;
Ambrosi, Alan;
Cardozo, Nilo Sergio Medeiros;
Tessaro, Isabel Cristina

Publication type:

Article

Preparation of environment‐friendly hydrophilic rubber from natural rubber grafted with sodium acrylate by reactive melt mixing.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1833, doi. 10.1002/pen.25968

By:

Nuinu, Pranee;
Srichan, Sansanee;
Ngamlerd, Anuchit;
Wichian, Chamaiporn;
Prasertsri, Sarawut;
Saengsuwan, Sayant;
Hinchiranan, Napida;
Vudjung, Chaiwute

Publication type:

Article

Preparation of hypercrosslinked polymers with cashew nut shell liquid for removal of volatile organic compounds.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1823, doi. 10.1002/pen.25967

By:

Liu, Zixin;
Liu, Huan;
Wang, Yan;
Yu, Haoran;
Wang, Jianying

Publication type:

Article

Pluronic F127‐modified BaTiO3 for ceramic/polymer nanocomposite dielectric capacitor with enhanced energy storage performance.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1811, doi. 10.1002/pen.25966

By:

Chen, Jian;
Zhou, Chuang;
Cai, Wei;
Huang, Fuxiang;
Zhang, Chunyan;
Cao, Liangliang;
Meng, Fancheng

Publication type:

Article

Synthesis and characterization of pH‐responsive water‐dispersed nanohydrogels of cross‐linked polyacrylamide‐co‐polyacrylic acid.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1797, doi. 10.1002/pen.25965

By:

Corona Rivera, Miguel Angel;
Cisneros Covarrubias, Cándida Anahy;
Fernández Escamilla, Víctor Vladimir Amílcar;
Mendizábal Mijares, Eduardo;
Pérez López, José Elías

Publication type:

Article

Effect of starch nanocrystals addition on the physicochemical, thermal, and optical properties of low‐density polyethylene (LDPE) films.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1786, doi. 10.1002/pen.25964

By:

Martins, Paola Chaves;
Latorres, Juliana Machado;
Martins, Vilásia Guimarães;
Machado, Ana Vera

Publication type:

Article

Morphology and crystallization kinetics of G‐resins and isotactic polypropylene.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1775, doi. 10.1002/pen.25963

By:

Sukhonthamethirat, Natchamon;
Vao‐soongnern, Visit;
Okamoto, Shigeru;
Sakurai, Shinichi

Publication type:

Article

Multiple recycling of a PLA/PHB biopolymer blend for sustainable packaging applications: Rheology‐morphology, thermal, and mechanical performance analysis.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1764, doi. 10.1002/pen.25962

By:

Farias, Naiara C.;
Major, Ian;
Devine, Declan;
Brennan Fournet, Margaret;
Pezzoli, Romina;
Farshbaf Taghinezhad, Soheil;
Hesabi, Mohammadnabi

Publication type:

Article

Enhanced dielectric and energy storage properties of polypropylene by high‐energy electron beam irradiation.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1756, doi. 10.1002/pen.25961

By:

Hu, Jing;
Zhao, Xuanchen;
Xie, Junhao;
Liu, Yan;
Sun, Shulin

Publication type:

Article

Parametric investigation for mechanical properties of tetra‐anti‐chiral auxetic structures of polymer under compressive loading.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1735, doi. 10.1002/pen.25960

By:

Teraiya, Soham;
Vyavahare, Swapnil;
Kumar, Shailendra

Publication type:

Article

Issue Information.

Published in:: Polymer Engineering & Science, 2022, v. 62, n. 6, p. 1731, doi. 10.1002/pen.25726
Publication type:: Article

Works in Polymer Engineering & Science, 2022, Vol 62, Issue 6

The effect of the titanium dioxide nanoparticles on the morphology and degradation of polyamide 6 prepared by anionic ring‐opening polymerization.

Effects of humidity and temperature on hydrolytic degradation of polydioxanone.

Smooth‐rough asymmetric PLGA structure made of dip coating membrane and electrospun nanofibrous scaffolds meant to be used for guided tissue regeneration of periodontium.

Preparation and characteristics of polymer matrix composite coatings with low infrared emissivity and high‐temperature resistance.

Thermal‐induced dielectric response in mechanically durable polyvinylidene fluoride–kapok encapsulated polyethylene glycol composite films.

Elastic composites fabricating for electromagnetic interference shielding based on MWCNTs and Fe<sub>3</sub>O<sub>4</sub> unique distribution in immiscible NR/NBR blends.

The effects of nanoclay and carbon nanotube co‐addition on properties of an amorphous polyamide/maleated styrene‐ethylene‐co‐butylene‐styrene blend.

Mechanically robust sodium alginate/cellulose nanofibers/polyethyleneimine composite aerogel for effective removal of hexavalent chromium and anionic dyes.

Superior EMI shielding effectiveness with enhanced electrical conductivity at low percolation threshold of flexible novel ethylene methyl acrylate/single‐walled carbon nanotube nanocomposites.

Synthesis and characterization of block copolymers of styrene‐maleic acid with acrylamide and N,N‐dimethylacrylamide.

Excellent effect of lubrication performance of chitosan/polyethylene glycol/palygorskite as water‐based lubricating additive on 304 stainless steel and polymer pairs.

Composite waterborne polyurethane reinforced with silane modified lignin as an adhesive between polypropylene decorative films and wood‐based panels.

Bio‐based polylactic acid or epoxy natural rubber thermoplastic vulcanizates with dual interfacial compatibilization networks.

A composite electrode of 2D‐Ti3C2 (MXene) and polyemeraldine salt of polyaniline for supercapacitor with high areal capacitance.

Characterization methods for strain‐induced damage in polypropylene.

Newsprint microcrystalline fibers reinforced styrene butadiene rubber as a low thermal conducting material: Effect of electron beam irradiation and fiber content.

Effect of OHMIC heating and ultrasound on functional properties of biodegradable gelatin‐based films.

Improved melt strength and processability of impact copolymer polypropylene by introducing long‐chain branching via reactive extrusion with "ene" functionalized dendrimer.

Effects of residual wax content on the thermal, rheological, and mechanical properties of high‐density polyethylene.

Study on preparation of highly dispersed graphite composite expandable polystyrene foam by homogeneous dissolution‐suspension polymerization with waste polystyrene.

Poly(ethylene terephthalate) phase inversion membranes: Thermodynamics and effects of a poor solvent on the membrane characteristics.

Preparation of environment‐friendly hydrophilic rubber from natural rubber grafted with sodium acrylate by reactive melt mixing.

Preparation of hypercrosslinked polymers with cashew nut shell liquid for removal of volatile organic compounds.

Pluronic F127‐modified BaTiO<sub>3</sub> for ceramic/polymer nanocomposite dielectric capacitor with enhanced energy storage performance.

Synthesis and characterization of pH‐responsive water‐dispersed nanohydrogels of cross‐linked polyacrylamide‐co‐polyacrylic acid.

Effect of starch nanocrystals addition on the physicochemical, thermal, and optical properties of low‐density polyethylene (LDPE) films.

Morphology and crystallization kinetics of G‐resins and isotactic polypropylene.

Multiple recycling of a PLA/PHB biopolymer blend for sustainable packaging applications: Rheology‐morphology, thermal, and mechanical performance analysis.

Enhanced dielectric and energy storage properties of polypropylene by high‐energy electron beam irradiation.

Parametric investigation for mechanical properties of tetra‐anti‐chiral auxetic structures of polymer under compressive loading.

Issue Information.