Works in Polymer Engineering & Science, 2022, Vol 62, Issue 11

Results: 32

A radiative cooling, anti‐corrosion multifunctional composite coating derived from Jatropha (Jatropha curcas L.) oil.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3652, doi. 10.1002/pen.26134

By:

Chen, Bo Xi;
Sun, Jian Ping

Publication type:

Article

Graphene nanoplatelet filled elastomer composites; influence of different matrices on the dispersion, electrical and mechanical properties.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3880, doi. 10.1002/pen.26154

By:

Pradhan, Sudip;
Goswami, Debottam;
Ratna, Debdatta;
Chattopadhyay, Santanu

Publication type:

Article

Facile production of binary polymer/carbonic nanofiller‐based biodegradable electromagnetic interference shield films with low electrical percolation threshold.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3841, doi. 10.1002/pen.26151

By:

Nath, Krishnendu;
Ghosh, Suman Kumar;
Katheria, Ankur;
Das, Palash;
Das, Narayan Chandra

Publication type:

Article

Crystallization property, mechanical performance and enzymatic degradation behavior of PBS copolyesters modified by 2‐methyl‐1,3‐propanediol.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3831, doi. 10.1002/pen.26149

By:

Jiang, Sen;
Wang, Liyan;
Zheng, Rongrong;
Chong, Yunsheng;
Chen, Yanming

Publication type:

Article

Thermo‐responsive dielectric pulse in poly(vinylidene fluoride)/polyethylene glycol fibrous mats.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3662, doi. 10.1002/pen.26135

By:

Zhou, Weijie;
Gong, Yutie;
Li, Hairong;
Huang, Jing;
Liu, Qiongxin;
Wang, Wei;
Qu, Xiaoyuan;
Jiang, Ming;
Sun, Jiuxiao

Publication type:

Article

Development of novel reversible thermometer from N‐isopropylacrylamide and dicyanodihydrofuran hydrazone probe.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3820, doi. 10.1002/pen.26148

By:

Snari, Razan M.;
Al‐Qahtani, Salhah D.;
Aldawsari, Afrah M.;
Alnoman, Rua B.;
Ibarhiam, Saham F.;
Alaysuy, Omaymah;
Shaaban, Fathy;
El‐Metwaly, Nashwa M.

Publication type:

Article

Performance evaluation of thermally aged ATH and BN co‐doped silicone rubber nano‐micro composites for power cable applications.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3868, doi. 10.1002/pen.26153

By:

Vangapandu, Dhanunjaya Naidu;
Paul, Moutusi;
Mishra, Palash;
Sarathi, Ramanujam;
Kornhuber, Stefan;
Thapliyal, Shivraman

Publication type:

Article

Nucleation of electro‐active β and γ‐phases in P(VDF−HFP) for manufacturing energy harvesting device and self powered weight measuring device.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3858, doi. 10.1002/pen.26152

By:

Sk, Asadullah;
Adhikary, Prakriti;
Haldar, Prabir Kr.

Publication type:

Article

Effect of different type of organomontmorillonites on oxygen permeability of PLA‐based nanocomposites blown films.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3796, doi. 10.1002/pen.26145

By:

Adrar, Salima;
Ajji, Abdellah

Publication type:

Article

Fabrication and post‐processing of PI/PVDF‐HFP/PI electrospun sandwich separators for lithium‐ion batteries.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3641, doi. 10.1002/pen.26133

By:

Parsaei, Solmaz;
Zebarjad, Seyed Mojtaba;
Moghim, Mohammad Hadi

Publication type:

Article

Gel‐spinning of ultra‐high molecular weight polyethylene by a twin‐screw extruder with an ultra‐large length‐to‐diameter ratio.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3773, doi. 10.1002/pen.26143

By:

Wang, Jian;
Hu, Xiaofeng;
Liu, Fangke;
Long, Zhibin;
Shao, Mingwang

Publication type:

Article

Light‐weight and high‐strength PP/CaCO3 composites by die drawing: Effect of drawing ratios.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3809, doi. 10.1002/pen.26146

By:

Liu, Mingfei;
Chen, Ke;
Yu, Shikang;
Zhang, Run;
Jia, Mingyin;
Pan, Kai;
Xue, Ping

Publication type:

Article

Effects of shear stress on the behavior of volatile bubbles in the high‐density polyethylene melt.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3759, doi. 10.1002/pen.26142

By:

Huang, Zhengliang;
Wu, Dan;
Xu, Lei;
Yang, Yao;
Shuai, Yun

Publication type:

Article

Recycled plastic filament made from post‐consumer expanded polystyrene and polypropylene for fused filamant fabrication.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3786, doi. 10.1002/pen.26144

By:

Chu, Jia Sheng;
Koay, Seong Chun;
Chan, Ming Yeng;
Choo, Hui Leng;
Ong, Thai Kiat

Publication type:

Article

Single shot polarimetric characterization of the polymer based flexible polyethylene terephthalate substrate.

Published in:: Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3746, doi. 10.1002/pen.26141
Publication type:: Article

Insight into the role of debris in the formation of polytetrafluoroethylene film via molecular dynamic simulation of debris adhesion.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3672, doi. 10.1002/pen.26136

By:

Niu, Xiaoxing;
Zhou, Shidong;
Pan, Deng;
Zhao, Yuanliang;
Li, Lei

Publication type:

Article

Modeling melt conveying and power consumption of co‐rotating twin‐screw extruder kneading blocks: Part A. Data generation.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3721, doi. 10.1002/pen.26140

By:

Stritzinger, Ursula;
Roland, Wolfgang;
Berger‐Weber, Gerald;
Steinbichler, Georg

Publication type:

Article

Chitosan sponges and polycaprolactone nanoparticles carrying tranexamic acid as hemostatic agent: Synthesis, characterization and bioapplication.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3709, doi. 10.1002/pen.26139

By:

dos Santos, Maria Carolina Fernandes;
dos Santos Cavalcante, Luiza Peixoto;
de Andrade, Karlivânia Ferreira;
da Silva, Alan Frazão;
de Araújo Ferreira Muniz, Isis;
de Lima, Jefferson Muniz;
Aguiar, Rebeca Tibau;
Tavares, Josean Fechine;
Castellano, Lúcio Roberto Cançado;
da Silva, Sabrina Daniela;
Bonan, Paulo Rogério Ferreti

Publication type:

Article

Experimental investigation on mechanical properties of additively manufactured anti‐tetrachiral cellular auxetic structures under shear and flexural loading.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3695, doi. 10.1002/pen.26138

By:

Teraiya, Soham;
Kumar, Shailendra

Publication type:

Article

Mechanical and thermal properties of poly (butylene adipate‐butylene terephthalate) modified with phenol hydroxyl terminated polysiloxane.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3684, doi. 10.1002/pen.26137

By:

Yin, Shuang;
Chen, PeiJia;
Zhang, ZhiCong;
Liang, WeiJie;
Ge, Xin;
Yu, WeiYue;
Liu, HongJi;
Ge, JianFang

Publication type:

Article

Copolymerization of propylene with higher α‐olefin using supported titanium catalyst system.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3566, doi. 10.1002/pen.26127

By:

Patil, Harshad R.;
Chauhan, Sanjay;
Mishra, Anurag;
Choudhury, Rudra Prasad;
Gupta, Virendrakumar

Publication type:

Article

Low density polyethylene composites based on flax fibers modified by a combination of coupling agent.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3553, doi. 10.1002/pen.26126

By:

Chimeni‐Yomeni, Désiré;
Fazli, Ali;
Dubois, Charles;
Rodrigue, Denis

Publication type:

Article

Oxygen transmission rate through thermoformed trays: Modeling and influence of processing variables.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3599, doi. 10.1002/pen.26130

By:

Enguix, Carlos;
Sanjuan, Neus;
Ribal, Javier

Publication type:

Article

Tear fatigue behavior of lignin‐based sustainable rubber composites.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3589, doi. 10.1002/pen.26129

By:

Chowdhury, Soumya Ghosh;
Ghosh, Sreedip;
Chanda, Jagannath;
Ghosh, Prasenjit;
Bhattacharyya, Sanjay Kumar;
Mukhopadhyay, Rabindra

Publication type:

Article

Fabrication and characterization of Fe2O3‐OPEFB‐PTFE nanocomposites for microwave shielding applications.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3577, doi. 10.1002/pen.26128

By:

Khamis, Ahmad Mamoun;
Abbas, Zulkifly;
Azis, Raba'ah Syahidah;
Mensah, Ebenezer Ekow;
Alhaji, Ibrahim Abubakar

Publication type:

Article

Polyethylene terephthalate‐polyethylene naphthalte copolymer films with high oxygen barrier properties via in‐situ polymerization with hydroxy‐terminated polybutadiene.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3631, doi. 10.1002/pen.26132

By:

Quan, Li‐Jun;
Liu, Zhen‐Guo;
Zhang, Qiu‐Yu;
Li, Zhong‐Ming;
Chen, Yan‐Hui

Publication type:

Article

A kinetic scission model for molecular weight evolution in bioresorbable polymers.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3611, doi. 10.1002/pen.26131

By:

Hill, Aoife;
Ronan, William

Publication type:

Article

Lightweight and tough PVDF foams via high‐pressure foam injection molding with core‐back operation.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3543, doi. 10.1002/pen.26125

By:

Weng, Zhengsheng;
Ren, Qian;
Wu, Minghui;
Zhu, Xiuyu;
Li, Wanwan;
Wang, Long;
Zheng, Wenge

Publication type:

Article

Polydopamine coating on additive manufacturing‐based poly lactic acid structures with controllable parameters for enhanced mechanical properties: An experimental investigation.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3523, doi. 10.1002/pen.26124

By:

Sharma, Shrutika;
Mudgal, Deepa;
Gupta, Vishal

Publication type:

Article

The distribution of electrospun polylactic acid in polycaprolactone matrix controlled by traction rate and its effect on the foamed porous tissue engineering scaffolds.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3511, doi. 10.1002/pen.26123

By:

Wang, Lixia;
Zheng, Lun;
Zhou, Lu;
Shi, Miaolei;
Bi, Zhaojie;
Wang, Chen;
Wang, Dongfang;
Li, Qian

Publication type:

Article

Morphology, structure and properties of nonwoven materials obtained by melt electrospinning of polypropylene–polystyrene blends.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3503, doi. 10.1002/pen.26122

By:

Malakhov, Sergey N.;
Chvalun, Sergei N.

Publication type:

Article

Issue Information.

Published in:: Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3499, doi. 10.1002/pen.25731
Publication type:: Article

Works in Polymer Engineering & Science, 2022, Vol 62, Issue 11

A radiative cooling, anti‐corrosion multifunctional composite coating derived from Jatropha (Jatropha curcas L.) oil.

Graphene nanoplatelet filled elastomer composites; influence of different matrices on the dispersion, electrical and mechanical properties.

Facile production of binary polymer/carbonic nanofiller‐based biodegradable electromagnetic interference shield films with low electrical percolation threshold.

Crystallization property, mechanical performance and enzymatic degradation behavior of PBS copolyesters modified by 2‐methyl‐1,3‐propanediol.

Thermo‐responsive dielectric pulse in poly(vinylidene fluoride)/polyethylene glycol fibrous mats.

Development of novel reversible thermometer from N‐isopropylacrylamide and dicyanodihydrofuran hydrazone probe.

Performance evaluation of thermally aged ATH and BN co‐doped silicone rubber nano‐micro composites for power cable applications.

Nucleation of electro‐active β and γ‐phases in P(VDF−HFP) for manufacturing energy harvesting device and self powered weight measuring device.

Effect of different type of organomontmorillonites on oxygen permeability of PLA‐based nanocomposites blown films.

Fabrication and post‐processing of PI/PVDF‐HFP/PI electrospun sandwich separators for lithium‐ion batteries.

Gel‐spinning of ultra‐high molecular weight polyethylene by a twin‐screw extruder with an ultra‐large length‐to‐diameter ratio.

Light‐weight and high‐strength PP/CaCO<sub>3</sub> composites by die drawing: Effect of drawing ratios.

Effects of shear stress on the behavior of volatile bubbles in the high‐density polyethylene melt.

Recycled plastic filament made from post‐consumer expanded polystyrene and polypropylene for fused filamant fabrication.

Single shot polarimetric characterization of the polymer based flexible polyethylene terephthalate substrate.

Insight into the role of debris in the formation of polytetrafluoroethylene film via molecular dynamic simulation of debris adhesion.

Modeling melt conveying and power consumption of co‐rotating twin‐screw extruder kneading blocks: Part A. Data generation.

Chitosan sponges and polycaprolactone nanoparticles carrying tranexamic acid as hemostatic agent: Synthesis, characterization and bioapplication.

Experimental investigation on mechanical properties of additively manufactured anti‐tetrachiral cellular auxetic structures under shear and flexural loading.

Mechanical and thermal properties of poly (butylene adipate‐butylene terephthalate) modified with phenol hydroxyl terminated polysiloxane.

Copolymerization of propylene with higher α‐olefin using supported titanium catalyst system.

Low density polyethylene composites based on flax fibers modified by a combination of coupling agent.

Oxygen transmission rate through thermoformed trays: Modeling and influence of processing variables.

Tear fatigue behavior of lignin‐based sustainable rubber composites.

Fabrication and characterization of Fe<sub>2</sub>O<sub>3</sub>‐OPEFB‐PTFE nanocomposites for microwave shielding applications.

Polyethylene terephthalate‐polyethylene naphthalte copolymer films with high oxygen barrier properties via in‐situ polymerization with hydroxy‐terminated polybutadiene.

A kinetic scission model for molecular weight evolution in bioresorbable polymers.

Lightweight and tough PVDF foams via high‐pressure foam injection molding with core‐back operation.

Polydopamine coating on additive manufacturing‐based poly lactic acid structures with controllable parameters for enhanced mechanical properties: An experimental investigation.

The distribution of electrospun polylactic acid in polycaprolactone matrix controlled by traction rate and its effect on the foamed porous tissue engineering scaffolds.

Morphology, structure and properties of nonwoven materials obtained by melt electrospinning of polypropylene–polystyrene blends.

Issue Information.