Works matching IS 00222461 AND DT 2025 AND VI 60 AND IP 19

Results: 24

Correction: Crystal facets and surface morphology as a function of crystal orientation by automatic alignment of AFM and EBSD data: application to etched copper polycrystals.

Published in:

2025

By:

Brüning, Ralf;
Stanley, Sawyer;
Singh, Abhijit;
Hajati, Mehrad;
Bernhard, Tobias;
Dieter, Sascha;
Dietrich, Grégoire

Publication type:

Correction Notice

High permeability and low magnetic loss of Fe–Si/BN soft magnetic composites with layered structure.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8015, doi. 10.1007/s10853-025-10937-z

By:

Fan, Xi'an;
Jin, Qi;
Yang, Zhenjia;
Wu, Wei;
Li, Guangqiang;
Luo, Zigui

Publication type:

Article

Arc discharge synthesis of carbon nanoparticles: impacts of pressure on morphology and performance in nanofluids for direct absorption solar collectors.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8057, doi. 10.1007/s10853-025-10934-2

By:

Zaikovsky, Alexey;
Yudin, Ivan;
Fedoseev, Alexander;
Dmitrachkov, Aleksey;
Morozova, Marina

Publication type:

Article

Influence of drying process conditions on graphite anode properties and crystalline type of polyvinylidene fluoride binder.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8039, doi. 10.1007/s10853-025-10927-1

By:

Niu, Lijing;
Zhao, Jiajia;
Xie, Mengmeng;
Jiang, Xunyong

Publication type:

Article

The effect of MXene on the mechanical and electromagnetic interference shielding features of carbon fabric/epoxy scalable laminated composites.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7965, doi. 10.1007/s10853-025-10924-4

By:

Yuksel Yilmaz, Ayten Nur;
Bedeloglu, Ayse Celik;
Yunus, Doruk Erdem

Publication type:

Article

Improving the photocatalytic properties of CdMoO4 under visible light through Ca doping and Ag decoration.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7888, doi. 10.1007/s10853-025-10923-5

By:

Silva, J. M. P.;
Oliveira, R. A.;
Lima, A. B.;
Santos, R. M.;
de Sousa, F. B.;
Teodoro, M. D.;
Bomio, M. R. D.;
Motta, F. V.

Publication type:

Article

Corrosion resistance improvement on 316L stainless steel using humidity-assisted nanosecond laser pulses.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8183, doi. 10.1007/s10853-025-10921-7

By:

Cheng, Cong-Qian;
Li, Ping;
Shi, Hui-Jie;
Ali, Dilshad;
Li, Jun-Yan;
Zhang, Dong-Jiu;
Pei, Ji-Bin;
Wang, Zi-Jian;
Cao, Tie-Shan;
Liu, Dun;
Zhao, Jie

Publication type:

Article

Design and synthesis of low Pt-loaded Mn-ZIF-67 derived bifunctional electrocatalyst for oxygen electrode in metal–air batteries.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7872, doi. 10.1007/s10853-025-10919-1

By:

Haseeb, Haleema;
Iqbal, Naseem;
Noor, Tayyaba;
Zahra, Jaria;
Mehek, Rimsha

Publication type:

Article

Surface plasmon coupling between different shapes of silver nanostructures and wide-field SPR microscopy.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8170, doi. 10.1007/s10853-025-10917-3

By:

Al-Bataineh, Qais M.;
Aljarrah, Ihsan;
Ahmad, Ahmad A.;
Rjoub, Gaith;
Telfah, Ahmad D.;
Hergenröder, Roland

Publication type:

Article

Optimization of the barrier oxide layer to enhance long-term corrosion resistance of SUS 316L stainless steel in 3.5 wt% NaCl solution.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8148, doi. 10.1007/s10853-025-10916-4

By:

Choi, Yeji;
Kim, Jisoo;
Jeong, Chanyoung

Publication type:

Article

Prediction of viscosity of Mg and Al alloy melts by machine learning.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8133, doi. 10.1007/s10853-025-10915-5

By:

Chen, Yunjian;
Chen, Hongcan;
Yang, Shenglan;
Tang, Kai;
Fu, Yu;
Liu, Bin;
Luo, Qun;
Liu, Jundong;
Lu, Qi;
Hu, Bin;
Li, Qian;
Chou, Kuo-Chih

Publication type:

Article

Optimization and opto-mechanical properties characterization of TiO2/PDMS for optical imaging and biomedical engineering.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8078, doi. 10.1007/s10853-025-10914-6

By:

Zhang, Xinya;
Chen, Jinlong;
Ye, Jingchen;
Wang, Tingting;
Feng, Xiaowei;
Sun, Cuiru

Publication type:

Article

Correction: Fabrication and properties of NiO-modified Al2O3 reinforced Sn1.0Ag0.5Cu composite solder and soldering performance.

Published in:

2025

By:

Wang, Bingying;
Wu, Yongjin;
Wu, Wan;
Wang, Huigai;
Zhang, Keke

Publication type:

Correction Notice

Evaluating elastic modulus and energy absorption efficiency of composite metal foam using computational and experimental approaches.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7942, doi. 10.1007/s10853-025-10905-7

By:

Chacko, Zubin;
Cance, John;
Rabiei, Afsaneh

Publication type:

Article

3D printing of PCL-based composite scaffolds coated with mesoporous bioactive glass nanoparticles (MBGNs) incorporating boron and molybdenum for ion-assisted bone tissue engineering.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7924, doi. 10.1007/s10853-025-10900-y

By:

Nawaz, Qaisar;
López, Gerard Blanco;
Strunk, Till;
Damiani, Christian;
Mas-Moruno, Carlos;
Westhauser, Fabian;
Michalek, Martin;
Mutlu, Nurshen;
Boccaccini, Aldo R.

Publication type:

Article

Development of new silica nanoparticles/tetrapolymer core–shell structure with high thermal resistance for application in water-based drilling fluids.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7859, doi. 10.1007/s10853-025-10899-2

By:

Silvares, Giulia;
Lopes, Grazielle;
Vianna, Angelo M.;
Spinelli, Luciana S.

Publication type:

Article

Ginger extract as green corrosion inhibitor for 304 stainless steel in HCl solution: experimental and theoretical calculations.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8106, doi. 10.1007/s10853-025-10895-6

By:

Zhang, Guoyu;
Lin, Bilan;
Li, Junling;
Wang, Hao;
Sun, Yuqing;
Xu, Yuye

Publication type:

Article

Constructing three-dimensional MoSSe/CNTs anode for high-rate and capacity enhancement lithium-ion batteries.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8026, doi. 10.1007/s10853-025-10880-z

By:

Liu, Jiao;
Xin, DuQiang;
Ren, Min;
Duan, Wenyuan;
He, Yeming;
Yang, Hongwei;
Zhang, Yue

Publication type:

Article

Recent advancements in fabrication strategies and applications of superhydrophobic coatings.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7826, doi. 10.1007/s10853-025-10878-7

By:

Jiang, Zhengquan;
Sun, Yaxing;
Yan, Mingming;
Qian, Baogui;
Jiang, Aiyun;
Zhang, Xia;
Bi, Jinglei;
Tong, Yuping;
Yu, Laigui;
Li, Weihua

Publication type:

Article

An automatic measurement method of laser cladding coating defects based on deep learning.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7984, doi. 10.1007/s10853-025-10853-2

By:

Luo, Longmei;
Lian, Guofu;
Zhang, Xueming;
Feng, Meiyan;
Lan, Ruqing

Publication type:

Article

Hierarchically structured superhydropobic polydimethylsiloxane composite film for daytime radiative cooling.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7909, doi. 10.1007/s10853-025-10794-w

By:

Xu, Bowei;
Li, Taijiang;
Sun, Qi;
Lou, Zhengji;
Chen, Shengguang;
Li, Wei

Publication type:

Article

Review: a critical analysis of recent advancements on carbon-based materials for lithium–sulfur batteries.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7797, doi. 10.1007/s10853-025-10768-y

By:

Gueye, Amadou Belal;
Thomas, Sabu

Publication type:

Article

Exploration on functional groups of complexing agents during chemical mechanical polishing for Co interconnects.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8003, doi. 10.1007/s10853-025-10661-8

By:

Zhang, Lifei;
Lu, Xinchun

Publication type:

Article

Fabrication of large-sized dense bulk biocarbon with excellent mechanical properties by hot-press sintering.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8093, doi. 10.1007/s10853-025-10648-5

By:

Gu, Yanju;
Xie, You;
Xu, Xinru;
Hu, Weiqin;
He, Wei;
Tian, Yexin;
Tan, Ruixuan;
Fan, Zheqiong;
Liu, Bo;
Han, Fei

Publication type:

Article

Works matching IS 00222461 AND DT 2025 AND VI 60 AND IP 19

Correction: Crystal facets and surface morphology as a function of crystal orientation by automatic alignment of AFM and EBSD data: application to etched copper polycrystals.

High permeability and low magnetic loss of Fe–Si/BN soft magnetic composites with layered structure.

Arc discharge synthesis of carbon nanoparticles: impacts of pressure on morphology and performance in nanofluids for direct absorption solar collectors.

Influence of drying process conditions on graphite anode properties and crystalline type of polyvinylidene fluoride binder.

The effect of MXene on the mechanical and electromagnetic interference shielding features of carbon fabric/epoxy scalable laminated composites.

Improving the photocatalytic properties of CdMoO<sub>4</sub> under visible light through Ca doping and Ag decoration.

Corrosion resistance improvement on 316L stainless steel using humidity-assisted nanosecond laser pulses.

Design and synthesis of low Pt-loaded Mn-ZIF-67 derived bifunctional electrocatalyst for oxygen electrode in metal–air batteries.

Surface plasmon coupling between different shapes of silver nanostructures and wide-field SPR microscopy.

Optimization of the barrier oxide layer to enhance long-term corrosion resistance of SUS 316L stainless steel in 3.5 wt% NaCl solution.

Prediction of viscosity of Mg and Al alloy melts by machine learning.

Optimization and opto-mechanical properties characterization of TiO<sub>2</sub>/PDMS for optical imaging and biomedical engineering.

Correction: Fabrication and properties of NiO-modified Al<sub>2</sub>O<sub>3</sub> reinforced Sn1.0Ag0.5Cu composite solder and soldering performance.

Evaluating elastic modulus and energy absorption efficiency of composite metal foam using computational and experimental approaches.

3D printing of PCL-based composite scaffolds coated with mesoporous bioactive glass nanoparticles (MBGNs) incorporating boron and molybdenum for ion-assisted bone tissue engineering.

Development of new silica nanoparticles/tetrapolymer core–shell structure with high thermal resistance for application in water-based drilling fluids.

Ginger extract as green corrosion inhibitor for 304 stainless steel in HCl solution: experimental and theoretical calculations.

Constructing three-dimensional MoSSe/CNTs anode for high-rate and capacity enhancement lithium-ion batteries.

Recent advancements in fabrication strategies and applications of superhydrophobic coatings.

An automatic measurement method of laser cladding coating defects based on deep learning.

Hierarchically structured superhydropobic polydimethylsiloxane composite film for daytime radiative cooling.

Review: a critical analysis of recent advancements on carbon-based materials for lithium–sulfur batteries.

Exploration on functional groups of complexing agents during chemical mechanical polishing for Co interconnects.

Fabrication of large-sized dense bulk biocarbon with excellent mechanical properties by hot-press sintering.