Works matching IS 00222461 AND DT 2024 AND VI 59 AND IP 21

Results: 30

Ti3C2Tx MXene/reduced graphene oxide/cellulose nanocrystal-coated cotton fabric electrodes for supercapacitor applications.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9455, doi. 10.1007/s10853-024-09784-1

By:

Duygun, İnal Kaan;
Bedeloğlu, Ayşe

Publication type:

Article

Role of interfacial layer as PANI–silicene in Si-based photodiodes.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9437, doi. 10.1007/s10853-024-09782-3

By:

Kocyigit, Adem;
Yıldız, Dilber Esra;
Taşaltın, Nevin;
Yıldırım, Murat

Publication type:

Article

Preparation of polyimide bond-linked covalent organic frameworks as resin-compatible nanofillers for copper clad laminates with improved thermal and electrical performances.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9319, doi. 10.1007/s10853-024-09776-1

By:

Sun, He;
Wang, Cheng;
Zhang, Xiao;
Wang, Fengwei

Publication type:

Article

Visible light enabled photocapacitive charging and glucose sensing properties of hydrothermally synthesized WO3/CdS nanocomposites.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9303, doi. 10.1007/s10853-024-09775-2

By:

Zimba, Vishakha;
Meghana, N.;
Nayak, Jhasaketan

Publication type:

Article

Optimizing the performance of vapor-deposited perovskite solar cells through advanced predictive modeling.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9398, doi. 10.1007/s10853-024-09802-2

By:

Godasiaei, Seyed Hamed

Publication type:

Article

Impact of aluminium doping in magnesium-doped zinc oxide thin films by sputtering for photovoltaic applications.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9472, doi. 10.1007/s10853-024-09801-3

By:

Rahman, Mirza Mustafizur;
Rahman, Kazi Sajedur;
Rokonuzzaman, Md.;
Bhari, Bibi Zulaika;
Ludin, Norasikin Ahmad;
Ibrahim, Mohd Adib

Publication type:

Article

Two-dimensional interface acoustic topology for multi-band broadband controllable filtering.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9384, doi. 10.1007/s10853-024-09796-x

By:

Hu, Congfang;
Luo, Jiangxia;
Liang, Xiao;
Chu, Jiaming;
Liang, Haofeng;
Meng, Daxiang;
Zhang, Zhi

Publication type:

Article

Synthesis, electronic and vibrational properties, solvation effects, ADME and cytotoxic assay of aqua-(1,10-phenanthroline)-tyrosinato-copper(II) nitrate dihydrate complex: experimental and theoretical studies.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9502, doi. 10.1007/s10853-024-09795-y

By:

Pereira, Walajhone O.;
Oliveira Neto, João G.;
Viana, Jailton R.;
Carvalho, Guilherme G. C.;
Pessoa, Claudia;
Lage, Mateus R.;
Reis, Aramys S.;
de Sousa, Francisco F.;
dos Santos, Adenilson O.

Publication type:

Article

Achieving columnar-to-equiaxed transition to reduce hot cracking susceptibility in TIG-welded AZ31 alloy through MgO modification.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9361, doi. 10.1007/s10853-024-09791-2

By:

Zai, Le;
Tong, Xin;
Wang, Yun;
Zhang, Hao;
Xue, Xiaohuai

Publication type:

Article

Study of compaction-free fabrication of topologically ordered functionally graded iron-hydroxyapatite-zinc biodegradable composite implants.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9333, doi. 10.1007/s10853-024-09786-z

By:

Tripathi, Gaurav;
Pandey, Pulak Mohan

Publication type:

Article

3D printable cyanate esters-polytetrafluoroethylene composite.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9350, doi. 10.1007/s10853-024-09789-w

By:

Zhao, Yanan;
Cai, Zhouqishuo;
Qiu, Xiaowen;
Zhang, Jinmeng;
Lin, Xinping;
Lin, Zewen;
Hu, Xiaolan;
Bai, Hua

Publication type:

Article

Augmented interlaminar fracture toughness of nanofibers-interleaved composite laminates via plasma treatment.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9291, doi. 10.1007/s10853-024-09772-5

By:

Saeedifar, Milad;
Ahangar, Mahdy

Publication type:

Article

Regulation pore size distribution of FAU deposited by Ag-oxide nanoparticles with F anions corrosion for the adsorption of CH3I.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9276, doi. 10.1007/s10853-024-09738-7

By:

Li, Qian;
Ding, Yan;
Cong, Erli;
Xu, Shijia;
Li, Lanxin;
Ma, Xinchi;
Xiao, Songtao;
Gao, Chenyu;
Yang, Libin

Publication type:

Article

Tailoring microstructure and mechanical anisotropy of laser-MIG hybrid additive manufacturing TC11 titanium alloy through solution aging treatment.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9625, doi. 10.1007/s10853-024-09748-5

By:

Guo, Jilong;
Liu, Yang;
Zhao, Yong;
Wang, Feiyun;
Duan, Yuhang;
Chen, Guoqiang;
Qin, Yonghui;
Song, Shuming

Publication type:

Article

Influence and regulation of hydrogen content in pure copper rod billet during negative pressure continuous casting process.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9610, doi. 10.1007/s10853-024-09747-6

By:

Ba, Qinan;
Liu, Xuefeng;
Yang, Yaohua;
Gai, Ligui

Publication type:

Article

Influence of Mn–Si elements on the kinetics of oxidative phase transformation under continuous cooling conditions and modeling study.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9593, doi. 10.1007/s10853-024-09746-7

By:

Cao, Guangming;
Zhao, Wencong;
Song, Wentao;
Yu, Hengxiang;
Li, Silin;
Liu, Zhenyu

Publication type:

Article

Structure, magnetic and magnetocaloric properties of the Mn5Ge3 thin film grown on Si(111).

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9423, doi. 10.1007/s10853-024-09755-6

By:

Tarasov, A. S.;
Komogortsev, S. V.;
Lukyanenko, A. V.;
Yakovlev, I. A.;
Tarasov, I. A.;
Sukhachev, A. L.;
Rautskii, M. V.;
Solovyov, L. A.;
Andryushchenko, T. A.;
Bondarev, I. A.;
Varnakov, S. N.;
Volkov, N. V.

Publication type:

Article

Trace copper and bi-nonmetallic (N/S) modified ketjenblack (KB) as advanced electrocatalysts for oxygen reduction reactions.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9250, doi. 10.1007/s10853-024-09732-z

By:

Liu, Lvfei;
Zhang, Yao;
Gu, Yunjie;
Qu, Jiangwen;
Wang, Naiguang;
Ge, Shuaichen;
Li, Jingsha

Publication type:

Article

Computational screening of metal–organic frameworks for separation of CO2 and N2 from wet flue gas.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9371, doi. 10.1007/s10853-024-09744-9

By:

Ji, Chengxin;
Zhang, Kang

Publication type:

Article

Electroless plating catalyzed by 3D Cu NWs arrays on insulating substrate with enhanced adhesion.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9265, doi. 10.1007/s10853-024-09736-9

By:

Pan, Yi;
Fan, Shichang;
Yu, Weichao;
Wang, Baoyu;
Zhao, Hengyu;
Tang, Qize;
Zhang, Zihao;
Fang, Bin;
Zhang, Zhen

Publication type:

Article

Improvement of sulfide stress corrosion cracking resistance of the Inconel 625/X80 weld overlay by post-weld heat treatment.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9574, doi. 10.1007/s10853-024-09731-0

By:

Dong, Lijin;
Wu, Guiyu;
Zhang, Yan;
Shi, Zhenyan;
Wang, Shidong;
Wang, Qinying;
Liu, Li

Publication type:

Article

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9547, doi. 10.1007/s10853-024-09727-w

By:

Tan, Yunjie;
Zhu, Guoren;
Tian, Fengjun;
Zhao, Zhonghao;
Chai, Bosen

Publication type:

Article

Stabilized CsPbBr3 quantum dots in flower-like LYH matrix for high-performance white light-emitting diodes.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9237, doi. 10.1007/s10853-024-09725-y

By:

Yang, Yanrui;
Li, Shengnan;
Jiao, Guanwei;
Xue, Binya;
Wei, Biao;
Ma, Fei;
Zhang, Lin

Publication type:

Article

Enhanced photocatalytic activity and ferromagnetic ordering in hydrogenated Zn1−xCoxO.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9217, doi. 10.1007/s10853-024-09724-z

By:

Petrov, Dimitar N.;
Dang, N. T.;
Co, N. D.;
Tu, B. D.;
Lam, N. D.;
Quang, T. V.;
Nguyen, V. Q.;
Lee, J. H.;
Huy, B. T.;
Yang, D. S.;
Khan, D. T.;
Phan, T. L.

Publication type:

Article

New insight into tribofilm composition and structure of iron polyphosphate-rich tribofilm from formulated engine oil by ToF-SIMS.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9533, doi. 10.1007/s10853-024-09723-0

By:

Xia, Yana;
Zhang, Shuxia;
Wang, Zaizhou;
Zhang, Chunxiang

Publication type:

Article

Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9519, doi. 10.1007/s10853-024-09721-2

By:

Zhai, Ying;
Mohamed, Mohamed Elshahat;
Tian, Jiaxuan;
Niu, Bowei;
Lv, Shuwei;
Zhang, Xinming;
Yang, Xiaodong

Publication type:

Article

Fe–N co-doped carbon derived from one-step pyrolysis modified chitosan for activating H2O2 to degrade organic wastewater.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9491, doi. 10.1007/s10853-024-09718-x

By:

Jiang, Caiyi;
Xing, Bo;
Yang, Li;
Hou, Ming;
Guo, Shenghui;
Yang, Guo;
Wang, Yi;
Wang, Dongzheng;
Zhang, Siyang

Publication type:

Article

Stimulus-responsive room temperature phosphorescent materials based on poly(vinylalcohol) with tunable multicolor afterglow.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9208, doi. 10.1007/s10853-024-09711-4

By:

Yang, Tianlong;
Li, Taiqin;
He, Yuchen;
Wu, Yanling;
Chen, Mingxin;
Nie, Yujing;
Cai, Zhixiong

Publication type:

Article

Unveiling the potential of (CoFeNiMnCr)3O4 high-entropy oxide synthesized from CoFeNiMnCr high-entropy alloy for efficient oxygen-evolution reaction.

Published in:

Journal of Materials Science, 2024, v. 59, n. 21, p. 9189, doi. 10.1007/s10853-024-09710-5

By:

Božiček, Barbara Ljubec;
Hreščak, Jitka;
Kušter, Monika;
Kovač, Janez;
Naglič, Iztok;
Markoli, Boštjan;
Batič, Barbara Šetina;
Šala, Martin;
Drev, Sandra;
Marinko, Živa;
Čeh, Miran;
Marinho, Belisa Alcantara

Publication type:

Article

Editorial: The June 2024 cover paper.

Published in:

2024

By:

Kawasaki, Megumi

Publication type:

Editorial

Works matching IS 00222461 AND DT 2024 AND VI 59 AND IP 21

Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene/reduced graphene oxide/cellulose nanocrystal-coated cotton fabric electrodes for supercapacitor applications.

Role of interfacial layer as PANI–silicene in Si-based photodiodes.

Preparation of polyimide bond-linked covalent organic frameworks as resin-compatible nanofillers for copper clad laminates with improved thermal and electrical performances.

Visible light enabled photocapacitive charging and glucose sensing properties of hydrothermally synthesized WO<sub>3</sub>/CdS nanocomposites.

Optimizing the performance of vapor-deposited perovskite solar cells through advanced predictive modeling.

Impact of aluminium doping in magnesium-doped zinc oxide thin films by sputtering for photovoltaic applications.

Two-dimensional interface acoustic topology for multi-band broadband controllable filtering.

Synthesis, electronic and vibrational properties, solvation effects, ADME and cytotoxic assay of aqua-(1,10-phenanthroline)-tyrosinato-copper(II) nitrate dihydrate complex: experimental and theoretical studies.

Achieving columnar-to-equiaxed transition to reduce hot cracking susceptibility in TIG-welded AZ31 alloy through MgO modification.

Study of compaction-free fabrication of topologically ordered functionally graded iron-hydroxyapatite-zinc biodegradable composite implants.

3D printable cyanate esters-polytetrafluoroethylene composite.

Augmented interlaminar fracture toughness of nanofibers-interleaved composite laminates via plasma treatment.

Regulation pore size distribution of FAU deposited by Ag-oxide nanoparticles with F anions corrosion for the adsorption of CH<sub>3</sub>I.

Tailoring microstructure and mechanical anisotropy of laser-MIG hybrid additive manufacturing TC11 titanium alloy through solution aging treatment.

Influence and regulation of hydrogen content in pure copper rod billet during negative pressure continuous casting process.

Influence of Mn–Si elements on the kinetics of oxidative phase transformation under continuous cooling conditions and modeling study.

Structure, magnetic and magnetocaloric properties of the Mn<sub>5</sub>Ge<sub>3</sub> thin film grown on Si(111).

Trace copper and bi-nonmetallic (N/S) modified ketjenblack (KB) as advanced electrocatalysts for oxygen reduction reactions.

Computational screening of metal–organic frameworks for separation of CO<sub>2</sub> and N<sub>2</sub> from wet flue gas.

Electroless plating catalyzed by 3D Cu NWs arrays on insulating substrate with enhanced adhesion.

Improvement of sulfide stress corrosion cracking resistance of the Inconel 625/X80 weld overlay by post-weld heat treatment.

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO.

Stabilized CsPbBr<sub>3</sub> quantum dots in flower-like LYH matrix for high-performance white light-emitting diodes.

Enhanced photocatalytic activity and ferromagnetic ordering in hydrogenated Zn<sub>1−x</sub>Co<sub>x</sub>O.

New insight into tribofilm composition and structure of iron polyphosphate-rich tribofilm from formulated engine oil by ToF-SIMS.

Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition.

Fe–N co-doped carbon derived from one-step pyrolysis modified chitosan for activating H<sub>2</sub>O<sub>2</sub> to degrade organic wastewater.

Stimulus-responsive room temperature phosphorescent materials based on poly(vinylalcohol) with tunable multicolor afterglow.

Unveiling the potential of (CoFeNiMnCr)<sub>3</sub>O<sub>4</sub> high-entropy oxide synthesized from CoFeNiMnCr high-entropy alloy for efficient oxygen-evolution reaction.

Editorial: The June 2024 cover paper.