Works matching IS 00222461 AND DT 2024 AND VI 59 AND IP 16

Results: 30

Effect of CH4 concentration on the early growth stage of patterned diamond using high seeding density and hot filament chemical vapor deposition.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6835, doi. 10.1007/s10853-024-09641-1

By:

Nugera, Florence A.;
Devkota, Dipa;
Anupam, K. C.;
Ayala, Anival;
Aryal, Ganesh;
Engdahl, Chris;
Piner, Edwin L.;
Holtz, Mark W.

Publication type:

Article

Synergistic strengthening of Al matrix composites by in situ pyrolysis of C and precipitation of nanophases.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6792, doi. 10.1007/s10853-024-09633-1

By:

Li, Junguo;
Yang, Xuebin;
Li, Peibo;
Zhang, Yang;
Luo, Guoqiang;
Shen, Qiang;
Sun, Yi

Publication type:

Article

Tunable microwave absorption properties of Ni particles/carbon composites by calcination temperature.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6820, doi. 10.1007/s10853-024-09630-4

By:

Wei, Yupeng;
Zhang, Meng;
Li, Changze;
Wang, Xudong;
Zhang, Jiankang;
Chen, Shan;
Lin, Jingpeng;
Xiao, Rongzhen

Publication type:

Article

Preparation of silicon quantum dot–protein complex and application in antibacterial, antibiofilm, and bacterial cell imaging.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6946, doi. 10.1007/s10853-024-09622-4

By:

Zhao, Dan;
Jiao, Yan;
Liu, Huan;
Li, Xiaoyun;
Xu, Mengyu;
Xiao, Xincai;
Zhao, Haiyan

Publication type:

Article

Te–Au nanowires with multiple enzyme-like activities for glucose detection.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6929, doi. 10.1007/s10853-024-09621-5

By:

Ma, Rui;
Wang, Yijie;
Sha, Zhou;
Guan, Xiaotian;
Zhang, Sihao;
Wang, Chunnan;
Sun, Shuqing

Publication type:

Article

Two-step preparation of steel slag–lignin hybrid materials for effective removal of methylene blue.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6732, doi. 10.1007/s10853-024-09615-3

By:

Zhang, Zhaohui;
Liu, Jiaxiang

Publication type:

Article

Highly insulating polymeric aerogels derived from hollow material-filled gel emulsion.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6778, doi. 10.1007/s10853-024-09607-3

By:

Liu, Jianfei;
An, Xiaolong;
Yang, Yang;
Yang, Hui;
Rong, Wan;
Liu, Kaiqiang

Publication type:

Article

An out-of-oven curing technique for epoxy resin via magnetic particle-induced in situ heating.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6765, doi. 10.1007/s10853-024-09600-w

By:

Li, Yichao;
Sun, Ao;
Hu, Xiafen;
Wu, Dan;
Hao, Lei;
Yan, Youwei;
Xi, Zhaojun

Publication type:

Article

Evolution of microstructure and properties in reactive air brazing of 3YSZ ceramic and aluminized Crofer22h stainless steel using Pd-modified Ag–CuO filler.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7131, doi. 10.1007/s10853-024-09594-5

By:

Zhou, Wen Long;
Hu, Sheng Peng;
Song, Xiao Guo;
Luo, Yun;
Cao, Jian;
Long, Wei Min;
Hu, Dai Jun

Publication type:

Article

Cobalt-based metal–organic framework (Co-MOF) thin films with high capacitance for supercapacitor electrode.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6807, doi. 10.1007/s10853-024-09591-8

By:

Bhoite, A. A.;
Hubale, V. B.;
Sawant, V. A.;
Tarwal, N. L.

Publication type:

Article

Influence of citric acid and EFKA as dispersants on the properties of alumina monoliths produced by tert-butyl alcohol-based freeze-casting.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6711, doi. 10.1007/s10853-024-09589-2

By:

dos Santos, Giovana Magalhães;
de Faria, Anna Carolina Britto;
da Silva, Saulo Lucas Pereira;
Ribeiro, Camila de Lima;
Guenka, Tomé Seichi da Nóbrega;
de Souza, Rodrigo Nunes;
Silva, João Paulo Santiago de Assis;
Aiube, Carlos Martins;
Athayde, Daniel Dornellas;
Lima, Luiz Fernando de Sousa;
Rosa, Adriano Possebon;
Mohallem, Nelcy Della Santina;
Silva, Alysson Martins Almeida

Publication type:

Article

Influence of TiO2 coverage on activity and stability of Pd-TiO2/MWCNT-supported catalysts used in direct formic acid fuel cells.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6894, doi. 10.1007/s10853-024-09586-5

By:

Malolepszy, A.;
Mazurkiewicz-Pawlicka, M.;
Stobinski, L.;
Lesiak-Orłowska, B.;
Mierzwa, B.;
Kövér, L.;
Tóth, J.;
Chang, Yuan Chih

Publication type:

Article

Effect of grain orientation on the corrosion behavior of AZ31 alloy sheet.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7119, doi. 10.1007/s10853-024-09582-9

By:

Yang, Qingshan;
Zhang, Dan;
Chen, Zhuo;
Zhang, Jiawei;
Zhang, Cheng;
Yan, Hongwei

Publication type:

Article

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7105, doi. 10.1007/s10853-024-09580-x

By:

Agrawal, Ashish K.;
Singhai, Payal;
Singh, B.;
Kashyap, Yogesh;
Shukla, Mayank

Publication type:

Article

The effect of laser shock peening on the rotating bending fatigue resistance of S51740 stainless steel.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7089, doi. 10.1007/s10853-024-09578-5

By:

Ding, Xiangyu;
Zhang, Junlong;
Yu, Shutong;
Jiang, Zonghong;
Zhong, Jida;
Ma, Sijie;
Wang, Shengchao;
Li, Hongliang;
Wang, Cheng

Publication type:

Article

Potential of bacterial cellulose for sustainable fashion and textile applications: A review.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6685, doi. 10.1007/s10853-024-09577-6

By:

Nayak, Rajkishore;
Cleveland, Donna;
Tran, Giang;
Joseph, Frances

Publication type:

Article

Transformation microstructure and nucleation crystallography in high Sc-contained Al–Sc alloys after laser treatment.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7075, doi. 10.1007/s10853-024-09576-7

By:

Jinjiang, He;
Qian, Jia;
Xingquan, Wang;
Xiaomeng, Cao;
Zhaochong, Ding;
Ziqi, Cao;
Xinfu, Gu

Publication type:

Article

Mechanical, tribological, corrosion and tribocorrosion properties of ZrNxOy coatings on Ti–45Nb alloys by multi-arc ion plating.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7060, doi. 10.1007/s10853-024-09575-8

By:

Dang, Bo;
Yang, Kai;
Tian, Tian;
Li, Fengkun;
Ding, Feng;
Wei, Dongbo;
Zhang, Pingze

Publication type:

Article

Acoustic shock wave-induced reversible phase transition (rhombohedral to hexagonal) of bismuth telluride.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7044, doi. 10.1007/s10853-024-09574-9

By:

Bincy, F. Irine Maria;
Oviya, S.;
Kumar, Raju Suresh;
Kanappan, P.;
kim, Ikhyun;
Dhas, S. A. Martin Britto

Publication type:

Article

Effect of calcium carbonate whiskers on the setting behavior, autogenous shrinkage, drying shrinkage, and micro-structure of cement paste.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7028, doi. 10.1007/s10853-024-09573-w

By:

Wen, Shaoyong;
Li, Yuxiang;
Yao, Guisheng;
Cao, Mingli

Publication type:

Article

Solvothermally synthesized bismuth telluride hexagonal platelets as an efficient anode material for lithium- and sodium-ion batteries.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6879, doi. 10.1007/s10853-024-09571-y

By:

Abzal, Shaik M.;
Janga, Sai Lakshmi;
Bhaskara Rao, Y.;
Khatua, Sumit;
Kalyan, Kurapati;
Maiti, Paramita;
Patel, Rajkumar;
Patro, Laxmi Narayana;
Dash, Jatis Kumar

Publication type:

Article

Wear resistance of molybdenum disulfide-based coatings on titanium alloys: a review.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6662, doi. 10.1007/s10853-024-09567-8

By:

Li, Mohan;
Zhang, Xinfang;
Cao, Mingmei;
Zhou, Zheng;
Rao, Jinsong;
Yi, Shuang;
Zhang, Yuxin;
Fu, Jiawei;
Chen, Longmiao;
Ding, Songlin

Publication type:

Article

Interfacial design and damage of fiber-reinforced polymer composites/strengthening concrete: a review.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6645, doi. 10.1007/s10853-024-09566-9

By:

Zhang, Hui;
Pei, Xiaoyuan;
Yang, Zhengxin;
Luo, Shigang;
Yan, Minjie;
Liu, Liangsen;
Xu, Zhiwei

Publication type:

Article

Multifunctional Cu/poplar-PLA conductive nonwoven fabric for electromyography (EMG) sensing, pressure sensing, and thermal heating applications.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6861, doi. 10.1007/s10853-024-09565-w

By:

Sadi, Mohammad Shak;
Nahar, Nazmun;
Kumpikaitė, Eglė

Publication type:

Article

Wear resistance of Ni/nano-Al2O3 composite coatings by brush electroplating.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 7009, doi. 10.1007/s10853-024-09563-y

By:

Gao, Meiyu;
Pei, Zhiliang;
Song, Guihong;
Liu, Zhiyang;
Li, Honglei;
Gong, Jun

Publication type:

Article

Multi-stage stabilization and high-strength nano-porous Si@C for simple fabrication of lithium-ion batteries.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6849, doi. 10.1007/s10853-024-09561-0

By:

Li, Xue;
Liu, Chenxi;
Xu, Anding;
Wu, Songping;
Wang, Liming

Publication type:

Article

Effect of deformation and heat treatment parameters on the microstructure and properties of forged TB18 titanium alloy.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6986, doi. 10.1007/s10853-024-09554-z

By:

Fu, Qiang;
Xiang, Wei;
Yuan, Wuhua

Publication type:

Article

Utilizing ion-etching strategy to construct ultra-lightweight CoNi alloy-modified electrospun carbon fiber composites for efficient electromagnetic wave absorption.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6746, doi. 10.1007/s10853-024-09553-0

By:

Zhang, Yijing;
Ding, Jiawei;
Gong, Chuangchuang;
Cui, Jin;
Fu, Yuanyuan;
Cong, Hongwei;
He, Chunnian;
Shi, Chunsheng;
He, Fang

Publication type:

Article

Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6965, doi. 10.1007/s10853-024-09552-1

By:

Dai, Zixiang;
Liu, Xiao;
Xie, Hongbin;
Guan, Weimian;
Gao, Mingyu;
Li, Shunchao;
Wu, Youliang;
Xiao, Xuezhang;
Ling, Guoping;
Bao, Guohuan;
Liu, Jiabin;
Fang, Youtong

Publication type:

Article

PVA/silica hybrid hydrogel with ultra-high strength and toughness.

Published in:

Journal of Materials Science, 2024, v. 59, n. 16, p. 6916, doi. 10.1007/s10853-023-09061-7

By:

Tan, Xiansheng;
Liang, Caiying;
Bai, Shihang;
Lan, Pei;
Ren, Yan;
Zhao, Jianhao;
Rong, Jianhua

Publication type:

Article

Works matching IS 00222461 AND DT 2024 AND VI 59 AND IP 16

Effect of CH<sub>4</sub> concentration on the early growth stage of patterned diamond using high seeding density and hot filament chemical vapor deposition.

Synergistic strengthening of Al matrix composites by in situ pyrolysis of C and precipitation of nanophases.

Tunable microwave absorption properties of Ni particles/carbon composites by calcination temperature.

Preparation of silicon quantum dot–protein complex and application in antibacterial, antibiofilm, and bacterial cell imaging.

Te–Au nanowires with multiple enzyme-like activities for glucose detection.

Two-step preparation of steel slag–lignin hybrid materials for effective removal of methylene blue.

Highly insulating polymeric aerogels derived from hollow material-filled gel emulsion.

An out-of-oven curing technique for epoxy resin via magnetic particle-induced in situ heating.

Evolution of microstructure and properties in reactive air brazing of 3YSZ ceramic and aluminized Crofer22h stainless steel using Pd-modified Ag–CuO filler.

Cobalt-based metal–organic framework (Co-MOF) thin films with high capacitance for supercapacitor electrode.

Influence of citric acid and EFKA as dispersants on the properties of alumina monoliths produced by tert-butyl alcohol-based freeze-casting.

Influence of TiO<sub>2</sub> coverage on activity and stability of Pd-TiO<sub>2</sub>/MWCNT-supported catalysts used in direct formic acid fuel cells.

Effect of grain orientation on the corrosion behavior of AZ31 alloy sheet.

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT.

The effect of laser shock peening on the rotating bending fatigue resistance of S51740 stainless steel.

Potential of bacterial cellulose for sustainable fashion and textile applications: A review.

Transformation microstructure and nucleation crystallography in high Sc-contained Al–Sc alloys after laser treatment.

Mechanical, tribological, corrosion and tribocorrosion properties of ZrN<sub>x</sub>O<sub>y</sub> coatings on Ti–45Nb alloys by multi-arc ion plating.

Acoustic shock wave-induced reversible phase transition (rhombohedral to hexagonal) of bismuth telluride.

Effect of calcium carbonate whiskers on the setting behavior, autogenous shrinkage, drying shrinkage, and micro-structure of cement paste.

Solvothermally synthesized bismuth telluride hexagonal platelets as an efficient anode material for lithium- and sodium-ion batteries.

Wear resistance of molybdenum disulfide-based coatings on titanium alloys: a review.

Interfacial design and damage of fiber-reinforced polymer composites/strengthening concrete: a review.

Multifunctional Cu/poplar-PLA conductive nonwoven fabric for electromyography (EMG) sensing, pressure sensing, and thermal heating applications.

Wear resistance of Ni/nano-Al<sub>2</sub>O<sub>3</sub> composite coatings by brush electroplating.

Multi-stage stabilization and high-strength nano-porous Si@C for simple fabrication of lithium-ion batteries.

Effect of deformation and heat treatment parameters on the microstructure and properties of forged TB18 titanium alloy.

Utilizing ion-etching strategy to construct ultra-lightweight CoNi alloy-modified electrospun carbon fiber composites for efficient electromagnetic wave absorption.

Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder.

PVA/silica hybrid hydrogel with ultra-high strength and toughness.