Works matching IS 00222461 AND DT 2024 AND VI 59 AND IP 15

Results: 30

Bidirectional elastic modulator via terfenol-D in phononic crystal Mach–Zehnder interferometer.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6403, doi. 10.1007/s10853-024-09619-z

By:

Ranjbar, Sajjad;
Nazari, Fakhroddin;
Hajizadeh, Rasoul

Publication type:

Article

Acoustic velocity and stability of tissue-mimicking echogenic materials for ultrasound training phantoms.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6509, doi. 10.1007/s10853-024-09610-8

By:

Mencarelli, Marta;
Puggelli, Luca;
Virga, Antonio;
Furferi, Rocco;
Volpe, Yary

Publication type:

Article

Formation of < 100 > vacancy dislocation loops from two-dimensional vacancy platelets in body-centered cubic iron.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6386, doi. 10.1007/s10853-024-09608-2

By:

Yang, Yong;
Ni, Yong;
Liu, Xuepeng;
He, Linghui

Publication type:

Article

Spray atomization-assisted pulsed-CVD surface coating for flame-retardant polyurethane foam.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6627, doi. 10.1007/s10853-024-09602-8

By:

Zheng, Dawei;
Zhu, Yingming;
Wu, Kejing;
Liu, Shengqiang;
Fu, Pengcheng;
Lu, Houfang;
Liang, Bin

Publication type:

Article

Tuning the plasmonic response of periodic gold nanodisk arrays for urea sensing.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6497, doi. 10.1007/s10853-024-09599-0

By:

Singh, Gaurav Pal;
Fuhrmann, Bodo;
Syrowatka, Frank;
Schilling, Joerg;
Sardana, Neha

Publication type:

Article

Preparation, structure and magnetic properties of spherical FeSiB/Al2O3 soft magnetic composites prepared in a magnetic field.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6354, doi. 10.1007/s10853-024-09597-2

By:

Zhu, Qijing;
Zhang, Chaoyun;
Peng, Xiaoling;
Li, Jing;
Wu, Qiong;
Xu, Jingcai;
Hong, Bo;
Wang, Xinqing;
Ge, Hongliang

Publication type:

Article

Effect of dehydration method on the micro- and nanomorphological properties of bacterial cellulose produced by Medusomyces gisevii on different substrates.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6614, doi. 10.1007/s10853-024-09596-3

By:

Pogorelova, Natalia;
Rogachev, Evgeniy;
Akimbekov, Nuraly;
Digel, Ilya

Publication type:

Article

Editorial: the 2023 William Bonfield Prize for best review paper.

Published in:

2024

By:

Norton, M. Grant

Publication type:

Editorial

Probing local magnetic states in the van der Waals ferromagnet Fe4GeTe2 by a vector-field magnetic force microscope.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6415, doi. 10.1007/s10853-024-09583-8

By:

Yun, Jinyoung;
Lee, Yeonkyu;
Kim, Geunyong;
Seo, Junho;
Kang, Beom Tak;
Kim, Jun Sung;
Choi, Jae-Hyuk;
Haberkorn, Nestor;
Kim, Jeehoon

Publication type:

Article

Analysis of the role of A-cations in lead-free A3SbI3 (A = Ba, Sr, Ca) perovskite solar cells.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6365, doi. 10.1007/s10853-024-09579-4

By:

Harun-Or-Rashid, Md.;
Farhat, Lamia Ben;
Brahmia, Ameni;
Mohammed, Mustafa K. A.;
Rahman, Md. Azizur;
Azzouz-Rached, Ahmed;
Rahman, Md. Ferdous

Publication type:

Article

Development of sustainable ternary bionanocomposite film reinforced with nanocellulose and nanoclay for microbial efficacy.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6334, doi. 10.1007/s10853-024-09568-7

By:

Tatagar, Asma M.;
Moodi, Javed I.;
Vanti, Gulamnabi L.;
Murgunde, Bahubali

Publication type:

Article

A review on polyaniline and its composites: from synthesis to properties and progressive applications.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6206, doi. 10.1007/s10853-024-09562-z

By:

Sharma, Navdeep;
Singh, Anoop;
Kumar, Naveen;
Tiwari, Ashish;
Lal, Madan;
Arya, Sandeep

Publication type:

Article

Superhydrophobic daytime radiative cooling coating incorporated with phase change microcapsules for building thermal regulation.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6459, doi. 10.1007/s10853-024-09560-1

By:

Long, Haibin;
Lei, Sheng;
Wang, Fajun;
Yang, Shasha;
Ju, Huiquan;
Ou, Junfei

Publication type:

Article

Inherent UV-blocking capability of polyurethane prepared from vegetable oil for solar cell encapsulation.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6446, doi. 10.1007/s10853-024-09558-9

By:

Ismail, Yasser A. M.;
Abolibda, Tariq Z.;
Almohammedi, Abdullah;
Aly, K. A.;
Gomha, Sobhi M.;
Ahmed, Hoda A.;
Ibrahim, Mohamed S.

Publication type:

Article

Preparation and characterization of PVB/CsxWO3/SiO2(aerogel) nanocomposites for laminated glass with high visible light transmission and excellent thermal insulation.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6322, doi. 10.1007/s10853-024-09557-w

By:

Mu, Yuqi;
Liu, Yunpeng;
Yang, Xihao;
Yao, Zhiyu;
Zhen, Zhilu;
Xue, Junqiang;
Wei, Yen;
Niu, Kangmin

Publication type:

Article

Role of the plasticizers on the crystallization of PLA and its composites with mesoporous MCM-41.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6305, doi. 10.1007/s10853-024-09556-x

By:

Blázquez-Blázquez, Enrique;
Barranco-García, Rosa;
Díez-Rodríguez, Tamara M.;
Cerrada, María L.;
Pérez, Ernesto

Publication type:

Article

Nanoparticle-functionalized microsensors for room-temperature hydrogen detection.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6436, doi. 10.1007/s10853-024-09555-y

By:

Debnath, Suman;
Flores-Hansen, Carsten;
Carneiro, Nikhil F.;
Swann, William A.;
Siefker, Zachary A.;
Chiu, George T.-C.;
Braun, James E.;
Rhoads, Jeffrey F.;
Boudouris, Bryan W.

Publication type:

Article

A comparative study of macrosegregation evolution kinetics for undercooled Cu60Fe40 immiscible alloy during slow cooling and rapid cooling processes.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6597, doi. 10.1007/s10853-024-09550-3

By:

Wu, Yuhao;
Su, Jingwen;
Du, Huiling;
Gao, Yuqiang;
Gao, Zhiming;
Du, Mingchen

Publication type:

Article

Enhanced photocatalytic degradation properties of a g-C3N4/BiVO4 heterostructure system induced by surface and interface heterojunctions.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6285, doi. 10.1007/s10853-024-09548-x

By:

Miao, Xiaodan;
Liu, Xiaowen;
Wang, Yuanfan;
Chen, Pei

Publication type:

Article

A review on copper-based nanoparticles as a catalyst: synthesis and applications in coupling reactions.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6169, doi. 10.1007/s10853-024-09546-z

By:

Pathak, Rakshit;
Punetha, Vinay Deep;
Bhatt, Shalini;
Punetha, Mayank

Publication type:

Article

Effect of SO42− in aerobic/anaerobic environment and its interaction with HCO3− on corrosion behavior of carbon steel.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6583, doi. 10.1007/s10853-024-09545-0

By:

Gao, Mingyang;
Wang, Haitao;
Han, En-Hou

Publication type:

Article

Effect of overlap rate on the microstructure and corrosion behavior of pure copper laser cladding.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6564, doi. 10.1007/s10853-024-09544-1

By:

Nie, Baoxian;
Xue, Yanpeng;
Luan, Benli

Publication type:

Article

Improved laser-induced dynamic wetting behavior and spreading mechanism of non-reactive Mg/steel systems with the assistance of Cu coating.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6551, doi. 10.1007/s10853-024-09542-3

By:

Dou, Tianyu;
Wang, Ruijun;
Xu, Wenhu;
Yang, Jin;
Li, Haoyue;
Zheng, Min;
Jiang, Qing;
Jiang, Jiawei;
Li, Yulong;
Tan, Caiwang

Publication type:

Article

Surface-modified MOFs for synthesizing hollow Fe-CoP polyhedrons encapsulating CoP particles to enhance the performance of OER.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6270, doi. 10.1007/s10853-024-09541-4

By:

Wu, Hongmei;
Liu, Baoshan;
Zhang, Yao;
Li, Feng;
Liu, Jing;
Zhao, Liping;
Zhang, Peng;
Gao, Lian

Publication type:

Article

Mechanical response, deformation and damage mechanisms in dual-phase cobalt upon plate impact.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6537, doi. 10.1007/s10853-024-09540-5

By:

Chen, Y. T.;
Cai, Y.;
Chen, L. Z.;
Zhao, S. P.;
Xu, J.;
Liu, X. H.;
Zhang, N. B.;
Lu, L.;
Luo, S. N.

Publication type:

Article

Remanence properties and Mössbauer analysis of the strontium hexaferrite with copper deposited by sputtering.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6425, doi. 10.1007/s10853-024-09530-7

By:

Santos-López, F. J.;
Martínez, J. R.;
Lobo-Guerrero, A.;
Marquina, M. L.;
Mazariego, J. L. Pérez;
Aranda-Espinoza, S.;
García‐Gallegos, J. H.

Publication type:

Article

Constructing three kinds of porous organic polymers and functionalizing by deep eutectic solvents: the effect of three-dimensional structure and π electronic structure of monomers.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6245, doi. 10.1007/s10853-024-09528-1

By:

Xian, Ziwei;
Tang, Baokun;
Zhu, Tao

Publication type:

Article

Toward sustainable menstrual health management: focus on super absorbent polymers.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6138, doi. 10.1007/s10853-024-09519-2

By:

Mogale, Refilwe;
Schutte-Smith, Marietjie;
Erasmus, Elizabeth;
De Wet, Kantinka;
Visser, Hendrik G.

Publication type:

Article

Phase transformations in yttria-partly stabilized zirconia induced by dental polishing regimes.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6476, doi. 10.1007/s10853-024-09504-9

By:

Wertz, Markus;
Berthold, Christoph;
Flicker, Annette;
Sander, Stephan A. H.;
Brinkmann, Lisa;
Fuchs, Florian;
Koenig, Andreas

Publication type:

Article

Study on the influence of surface nickel plating on the microstructure and mechanical properties of WC-8Co/Inconel 718 brazed joints.

Published in:

Journal of Materials Science, 2024, v. 59, n. 15, p. 6525, doi. 10.1007/s10853-024-09335-8

By:

Qiao, Ruilin;
Qin, Jian;
Zhang, Guanxing;
Long, Weimin;
Liu, Pan;
Zhong, Sujuan

Publication type:

Article

Works matching IS 00222461 AND DT 2024 AND VI 59 AND IP 15

Bidirectional elastic modulator via terfenol-D in phononic crystal Mach–Zehnder interferometer.

Acoustic velocity and stability of tissue-mimicking echogenic materials for ultrasound training phantoms.

Formation of < 100 > vacancy dislocation loops from two-dimensional vacancy platelets in body-centered cubic iron.

Spray atomization-assisted pulsed-CVD surface coating for flame-retardant polyurethane foam.

Tuning the plasmonic response of periodic gold nanodisk arrays for urea sensing.

Preparation, structure and magnetic properties of spherical FeSiB/Al<sub>2</sub>O<sub>3</sub> soft magnetic composites prepared in a magnetic field.

Effect of dehydration method on the micro- and nanomorphological properties of bacterial cellulose produced by Medusomyces gisevii on different substrates.

Editorial: the 2023 William Bonfield Prize for best review paper.

Probing local magnetic states in the van der Waals ferromagnet Fe<sub>4</sub>GeTe<sub>2</sub> by a vector-field magnetic force microscope.

Analysis of the role of A-cations in lead-free A<sub>3</sub>SbI<sub>3</sub> (A = Ba, Sr, Ca) perovskite solar cells.

Development of sustainable ternary bionanocomposite film reinforced with nanocellulose and nanoclay for microbial efficacy.

A review on polyaniline and its composites: from synthesis to properties and progressive applications.

Superhydrophobic daytime radiative cooling coating incorporated with phase change microcapsules for building thermal regulation.

Inherent UV-blocking capability of polyurethane prepared from vegetable oil for solar cell encapsulation.

Preparation and characterization of PVB/Cs<sub>x</sub>WO<sub>3</sub>/SiO<sub>2</sub>(aerogel) nanocomposites for laminated glass with high visible light transmission and excellent thermal insulation.

Role of the plasticizers on the crystallization of PLA and its composites with mesoporous MCM-41.

Nanoparticle-functionalized microsensors for room-temperature hydrogen detection.

A comparative study of macrosegregation evolution kinetics for undercooled Cu<sub>60</sub>Fe<sub>40</sub> immiscible alloy during slow cooling and rapid cooling processes.

Enhanced photocatalytic degradation properties of a g-C<sub>3</sub>N<sub>4</sub>/BiVO<sub>4</sub> heterostructure system induced by surface and interface heterojunctions.

A review on copper-based nanoparticles as a catalyst: synthesis and applications in coupling reactions.

Effect of SO<sub>4</sub><sup>2−</sup> in aerobic/anaerobic environment and its interaction with HCO<sub>3</sub><sup>−</sup> on corrosion behavior of carbon steel.

Effect of overlap rate on the microstructure and corrosion behavior of pure copper laser cladding.

Improved laser-induced dynamic wetting behavior and spreading mechanism of non-reactive Mg/steel systems with the assistance of Cu coating.

Surface-modified MOFs for synthesizing hollow Fe-CoP polyhedrons encapsulating CoP particles to enhance the performance of OER.

Mechanical response, deformation and damage mechanisms in dual-phase cobalt upon plate impact.

Remanence properties and Mössbauer analysis of the strontium hexaferrite with copper deposited by sputtering.

Constructing three kinds of porous organic polymers and functionalizing by deep eutectic solvents: the effect of three-dimensional structure and π electronic structure of monomers.

Toward sustainable menstrual health management: focus on super absorbent polymers.

Phase transformations in yttria-partly stabilized zirconia induced by dental polishing regimes.

Study on the influence of surface nickel plating on the microstructure and mechanical properties of WC-8Co/Inconel 718 brazed joints.