Works matching IS 00222461 AND DT 2023 AND VI 58 AND IP 4

Results: 35

Adiabatic shear localization induced by rotationally accelerated shot peening.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1670, doi. 10.1007/s10853-023-08152-9

By:

Liu, Yanfang;
Cao, Yang;
Liu, Wei;
Mao, Qingzhong;
Zhou, Hao;
Zhao, Yonghao;
Zhu, Yuntian

Publication type:

Article

Effects of tempering temperature on temperature-dependent thermal properties of 1045 steel.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1905, doi. 10.1007/s10853-022-08137-0

By:

Ramos, Nícolas Pinheiro;
de Melo Antunes, Mariana;
da Silva, Antonio Augusto Araújo Pinto;
de Lima e Silva, Sandro Metrevelle Marcondes

Publication type:

Article

Robust and flexible free-standing polyimide/SiOx nanocomposite one-dimensional photonic crystals with high reflectance.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1656, doi. 10.1007/s10853-022-08136-1

By:

Jin, Xiong;
Guo, Xiang;
Zhai, Lei;
Vogelbacher, Florian;
Xia, Yuzheng;
Li, Mingzhu;
Xu, Caihong;
Zhang, Zongbo

Publication type:

Article

Wearable humidity sensor embroidered on a commercial face mask and its electrical properties.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1680, doi. 10.1007/s10853-022-08135-2

By:

Sinha, Ankita;
Stavrakis, Adrian K.;
Simić, Mitar;
Stojanović, Goran M.

Publication type:

Article

Crossover of thermal conductivity in SiC-reinforced ZrB2–HfB2 composites at elevated temperatures.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1505, doi. 10.1007/s10853-022-08132-5

By:

Hassan, Rubia;
Xavier, Vincent;
Thiruvenkatam, Venkateswaran;
Omar, Shobit;
Balani, Kantesh

Publication type:

Article

Carbon quantum dots and cucurbituril joining hands to achieve luminescence and self-healing performance in a hydrogel.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1739, doi. 10.1007/s10853-023-08151-w

By:

Yang, Qin;
Gao, Dahang;
Miao, Ruoyan;
Qin, Chuanjian;
Song, Fang;
Zhao, Weijie;
Zhao, Na;
Liu, Hu

Publication type:

Article

Study on the infiltration mechanism of tellurium into the Inconel 718.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1966, doi. 10.1007/s10853-023-08150-x

By:

Li, Guoying;
Liu, Zhanqiang;
Wang, Bing

Publication type:

Article

Effect of electrolyte and carbon material on the electrochemical performance of high-voltage aqueous symmetric supercapacitors.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1721, doi. 10.1007/s10853-023-08148-5

By:

Gajewska, Katarzyna;
Moyseowicz, Adam;
Minta, Daria;
Gryglewicz, Grażyna

Publication type:

Article

Microstructural characteristics and self-accommodation of the martensite in equiatomic ZrPd and near-equiatomic NiZr alloys.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1951, doi. 10.1007/s10853-023-08143-w

By:

Onaka, K.;
Yoshioka, T.;
Matsuda, M.

Publication type:

Article

Enhanced strength–ductility synergy of multiphase steels via regulation of austenite decomposition during annealing.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1939, doi. 10.1007/s10853-023-08142-x

By:

Gao, Pengfei;
Chu, Xiaohong;
Pan, Yinkui;
Liu, Jinhai;
Zhao, Zhengzhi

Publication type:

Article

An artificial β-PVDF nanofiber layer for dendrite-free zinc anode in rechargeable aqueous batteries.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1708, doi. 10.1007/s10853-023-08139-6

By:

Yuan, Xinghan;
Yi, Juan;
Li, Chenjian;
Zhao, Zhenghui;
Xiong, Chuanxi

Publication type:

Article

Flow softening rules and mechanisms in Ti–6Al–4V alloy sheet during electrically assisted near-isothermal tension.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1925, doi. 10.1007/s10853-023-08140-z

By:

Li, Ping;
Liu, Le;
Hu, Lei;
Zhang, Yue;
Yan, Si-liang;
Xue, Ke-min

Publication type:

Article

Facile synthesis of rGO/Fe2O3 nanocomposite and its combination with aerosol forming composite for ultra-fast fire extinguishment.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1640, doi. 10.1007/s10853-022-08130-7

By:

Rohilla, Meenakshi;
Saxena, Amit;
Tyagi, Yogesh Kumar

Publication type:

Article

Properties of electroless thick nickel–phosphorus coating on SiCp/Al composite surface in acidic conditions.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1886, doi. 10.1007/s10853-022-08127-2

By:

Tian, Meijuan;
Jian, Zengyun;
Chang, Fange;
Hai, Rui

Publication type:

Article

Calculation of the degree of crystallinity of HDPE/GNPs nanocomposites by using various experimental techniques: a comparative study.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1621, doi. 10.1007/s10853-022-08125-4

By:

Tarani, Evangelia;
Arvanitidis, Ioannis;
Christofilos, Dimitrios;
Bikiaris, Dimitrios N.;
Chrissafis, Konstantinos;
Vourlias, George

Publication type:

Article

In situ preparation of Ti/CaB6 composites via powder metallurgy: microstructure, mechanical and tribological properties improvement.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1608, doi. 10.1007/s10853-022-08124-5

By:

Wu, Xinxin;
Pan, Yu;
Zhang, Jinshan;
Sun, Jianzhuo;
Liu, Yanjun;
Kuang, Fan;
Zhang, Ce;
Yang, Yucheng;
Lu, Xin

Publication type:

Article

Microstructural and oxidation effects on fatigue crack initiation mechanisms in a turbine disc alloy.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1869, doi. 10.1007/s10853-022-08120-9

By:

Kim, D.;
Jiang, R.;
Reed, P. A. S.

Publication type:

Article

Microstructure and strengthening mechanism of Mo@Ni reinforcement (W,Ti)C cermet via spark plasma sintering.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1813, doi. 10.1007/s10853-022-08100-z

By:

Peng, Jianhao;
Yi, Mingdong;
Zheng, Kai;
Zhang, Jingjie;
Xiao, Guangchun;
Chen, Zhaoqiang;
Chen, Hui;
Xu, Chonghai

Publication type:

Article

Environmentally friendly mesoporous SiO2 with mixed fiber/particle morphology and large surface area for enhanced dye adsorption.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1586, doi. 10.1007/s10853-022-08119-2

By:

Samy, A.;
Ismail, A. M.;
Ali, Heba

Publication type:

Article

Tailoring interfacial crosslinking sites to improve the dielectric properties of epoxy/POSS nanocomposites.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1554, doi. 10.1007/s10853-022-08111-w

By:

Aslam, Farooq;
Qu, Guanghao;
Feng, Yang;
Li, Shengtao

Publication type:

Article

Highly flexible cellulose-based hydrogel electrolytes: preparation and application in quasi solid-state supercapacitors with high specific capacitance.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1694, doi. 10.1007/s10853-022-08112-9

By:

Zhang, Pingxiu;
Li, Meng;
Jing, Yidan;
Zhang, Xiaomin;
Su, Shengpei;
Zhu, Jin;
Yu, Ningya

Publication type:

Article

Experimental investigation on microstructural and mechanical properties of in situ SiC-reinforced friction stir spot weld of Al 6061-T6.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1849, doi. 10.1007/s10853-022-08110-x

By:

Chaudhary, Neeru;
Singh, Sarbjit

Publication type:

Article

Room temperature stability, structure and mechanical properties of cubic tungsten carbide in flash sintered products.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1829, doi. 10.1007/s10853-022-08109-4

By:

Mazo, Isacco;
Molina-Aldareguia, Jon M.;
Molinari, Alberto;
Sglavo, Vincenzo M.

Publication type:

Article

Negative Poisson's ratio design, static mechanical properties and deformation behaviors on PVA-carbon fiber reinforced concrete.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1568, doi. 10.1007/s10853-022-08116-5

By:

Ma, Yanxuan;
Yu, Xia;
Zhao, Fei;
Liu, Jin;
Xu, Yaqian;
Zhang, Peng;
Zhang, Jian;
Wu, Lei

Publication type:

Article

In situ tensile test of selective laser melted Ti-6.5Al-2Zr-1Mo-1V alloy at different stages of martensite decomposition.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1798, doi. 10.1007/s10853-022-08099-3

By:

Wang, Qian;
Wang, Meng;
Guo, Shuai;
Tao, Siyuan;
Zhou, Junfeng;
Qin, Zehao;
Lin, Xin;
Huang, Weidong

Publication type:

Article

Effect of annealing temperature on magnetic and mechanical properties of twin-roll strip casting Cu-bearing non-oriented electrical steel.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1783, doi. 10.1007/s10853-022-08097-5

By:

Xu, Yanqing;
Zu, Guoqing;
Liang, Jiangnan;
Wang, Yuqian;
Han, Ying;
Zhu, Weiwei;
Zhao, Yu;
Ran, Xu

Publication type:

Article

Cell structure-tunable PEFT copolyester foams prepared via conducting a prior cold crystallization.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 2025, doi. 10.1007/s10853-022-08091-x

By:

Wang, Zhijun;
Wang, Jinggang;
Pang, Yongyan;
Liu, Xinran;
Zhu, Jin;
Zheng, Wenge

Publication type:

Article

Chemical expansion of CeO2−δ and Ce0.8Zr0.2O2−δ thin films determined by laser Doppler vibrometry at high temperatures and different oxygen partial pressures.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1481, doi. 10.1007/s10853-022-07830-4

By:

Kohlmann, Dhyan;
Wulfmeier, Hendrik;
Schewe, Marvin;
Kogut, Iurii;
Steiner, Carsten;
Moos, Ralf;
Rembe, Christian;
Fritze, Holger

Publication type:

Article

Combined experimental and molecular simulation study of arginine/PBI composite membranes for high-temperature fuel cells.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1523, doi. 10.1007/s10853-022-07807-3

By:

Zhang, Dongqing;
Yu, Xiaoguang;
Zhang, Feng;
Liu, Wenqi;
Miao, Jiyuan;
Li, Xiaojin

Publication type:

Article

High-performance solid capacitor using vapor phase polymerized PEDOT film.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1979, doi. 10.1007/s10853-021-05976-1

By:

Jia, Ming;
Zhang, Maogui;
Zeng, Qiang;
Deng, Jicheng;
Liu, Yimin;
Liu, Fangyang;
Jiang, Liangxing;
Ai, Liang;
Ai, Yan

Publication type:

Article

Effect of an external magnetic field on arc geometry, weld microstructure and porosity of GMAW.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1769, doi. 10.1007/s10853-022-08096-6

By:

Li, Yiwen;
Miao, Junyan;
Zou, Wenfeng;
Dong, Zhihai;
Chang, Chenhe;
Liu, Dan;
Chang, Yunlong

Publication type:

Article

TG/DSC/FTIR/QMS analysis of environmentally friendly poly(citronellyl methacrylate)-co-poly(benzyl methacrylate) copolymers.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 2005, doi. 10.1007/s10853-022-08089-5

By:

Worzakowska, Marta

Publication type:

Article

CALPHAD-based design and preparation of high-strength, high-conductivity Cu–Fe–Zr alloys.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1752, doi. 10.1007/s10853-022-08087-7

By:

Yang, Huiya;
Lv, Tian;
Bu, Yeqiang;
Wu, Jinming;
Fang, Youtong;
Liu, Jiabin;
Wang, Hongtao

Publication type:

Article

Enhanced mechanical and current-carrying wear performances of copper/carbon-matrix composites via interfacial reaction of chromium.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1538, doi. 10.1007/s10853-022-08067-x

By:

Ren, Boyong;
Gao, Chenyu;
Wu, Wei;
He, Jiaxing;
Liu, Junwu;
Zhong, Honghai;
Jiang, Yang

Publication type:

Article

Influence of PBS, PBAT and TPS content on tensile and processing properties of PLA-based polymeric blends at different temperatures.

Published in:

Journal of Materials Science, 2023, v. 58, n. 4, p. 1991, doi. 10.1007/s10853-022-08081-z

By:

Dmitruk, Anna;
Ludwiczak, Joanna;
Skwarski, Mateusz;
Makuła, Piotr;
Kaczyński, Paweł

Publication type:

Article

Works matching IS 00222461 AND DT 2023 AND VI 58 AND IP 4

Adiabatic shear localization induced by rotationally accelerated shot peening.

Effects of tempering temperature on temperature-dependent thermal properties of 1045 steel.

Robust and flexible free-standing polyimide/SiO<sub>x</sub> nanocomposite one-dimensional photonic crystals with high reflectance.

Wearable humidity sensor embroidered on a commercial face mask and its electrical properties.

Crossover of thermal conductivity in SiC-reinforced ZrB<sub>2</sub>–HfB<sub>2</sub> composites at elevated temperatures.

Carbon quantum dots and cucurbituril joining hands to achieve luminescence and self-healing performance in a hydrogel.

Study on the infiltration mechanism of tellurium into the Inconel 718.

Effect of electrolyte and carbon material on the electrochemical performance of high-voltage aqueous symmetric supercapacitors.

Microstructural characteristics and self-accommodation of the martensite in equiatomic ZrPd and near-equiatomic NiZr alloys.

Enhanced strength–ductility synergy of multiphase steels via regulation of austenite decomposition during annealing.

An artificial β-PVDF nanofiber layer for dendrite-free zinc anode in rechargeable aqueous batteries.

Flow softening rules and mechanisms in Ti–6Al–4V alloy sheet during electrically assisted near-isothermal tension.

Facile synthesis of rGO/Fe<sub>2</sub>O<sub>3</sub> nanocomposite and its combination with aerosol forming composite for ultra-fast fire extinguishment.

Properties of electroless thick nickel–phosphorus coating on SiCp/Al composite surface in acidic conditions.

Calculation of the degree of crystallinity of HDPE/GNPs nanocomposites by using various experimental techniques: a comparative study.

In situ preparation of Ti/CaB<sub>6</sub> composites via powder metallurgy: microstructure, mechanical and tribological properties improvement.

Microstructural and oxidation effects on fatigue crack initiation mechanisms in a turbine disc alloy.

Microstructure and strengthening mechanism of Mo@Ni reinforcement (W,Ti)C cermet via spark plasma sintering.

Environmentally friendly mesoporous SiO<sub>2</sub> with mixed fiber/particle morphology and large surface area for enhanced dye adsorption.

Tailoring interfacial crosslinking sites to improve the dielectric properties of epoxy/POSS nanocomposites.

Highly flexible cellulose-based hydrogel electrolytes: preparation and application in quasi solid-state supercapacitors with high specific capacitance.

Experimental investigation on microstructural and mechanical properties of in situ SiC-reinforced friction stir spot weld of Al 6061-T6.

Room temperature stability, structure and mechanical properties of cubic tungsten carbide in flash sintered products.

Negative Poisson's ratio design, static mechanical properties and deformation behaviors on PVA-carbon fiber reinforced concrete.

In situ tensile test of selective laser melted Ti-6.5Al-2Zr-1Mo-1V alloy at different stages of martensite decomposition.

Effect of annealing temperature on magnetic and mechanical properties of twin-roll strip casting Cu-bearing non-oriented electrical steel.

Cell structure-tunable PEFT copolyester foams prepared via conducting a prior cold crystallization.

Chemical expansion of CeO<sub>2−δ</sub> and Ce<sub>0.8</sub>Zr<sub>0.2</sub>O<sub>2−δ</sub> thin films determined by laser Doppler vibrometry at high temperatures and different oxygen partial pressures.

Combined experimental and molecular simulation study of arginine/PBI composite membranes for high-temperature fuel cells.

High-performance solid capacitor using vapor phase polymerized PEDOT film.

Effect of an external magnetic field on arc geometry, weld microstructure and porosity of GMAW.

TG/DSC/FTIR/QMS analysis of environmentally friendly poly(citronellyl methacrylate)-co-poly(benzyl methacrylate) copolymers.

CALPHAD-based design and preparation of high-strength, high-conductivity Cu–Fe–Zr alloys.

Enhanced mechanical and current-carrying wear performances of copper/carbon-matrix composites via interfacial reaction of chromium.

Influence of PBS, PBAT and TPS content on tensile and processing properties of PLA-based polymeric blends at different temperatures.