Works matching IS 00222461 AND DT 2023 AND VI 58 AND IP 12

Results: 30

Two-dimensional Nb2CTx nanosheets decorated LiFePO4/C as cathode material for lithium-ion batteries.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5413, doi. 10.1007/s10853-023-08361-2

By:

Zeng, Guangcong;
Zhou, Jian;
Ren, Sili

Publication type:

Article

Microstructure evolution, deformation behavior and processing performance of TNM TiAl alloy.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5530, doi. 10.1007/s10853-023-08360-3

By:

Yang, Gang;
Xu, Xiangjun;
Hao, Guojian;
Zhai, Yuewen;
Wang, Huizhen;
Liang, Yongfeng;
Lin, Junpin

Publication type:

Article

High-temperature mechanical behavior of partially sintered ceramics.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5208, doi. 10.1007/s10853-023-08382-x

By:

Nečina, Vojtěch;
Gass, Sebastián E.;
Uhlířová, Tereza;
Talou, Mariano H.;
Camerucci, M. Andrea;
Tomba Martinez, Analía G.

Publication type:

Article

Life cycle assessment of nanocomposite manufactured using ultrasonic stir casting.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5298, doi. 10.1007/s10853-023-08363-0

By:

Chaurasiya, Santankumar;
Singh, Gurraj

Publication type:

Article

Bioactive functional sericin/polyvinyl alcohol hydrogel: biomaterials for supporting orthopedic surgery in osteomyelitis.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5477, doi. 10.1007/s10853-023-08356-z

By:

Noosak, Chayanee;
Iamthanaporn, Khanin;
Meesane, Jirut;
Voravuthikunchai, Supayang Piyawan;
Sotthibandhu, Dennapa Saeloh

Publication type:

Article

Structural, half-metallic, electronic, magnetic and pressure-induced elastic changes of PdVSi, PdVGe, PdVSn, and PdVSb alloys.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5349, doi. 10.1007/s10853-023-08364-z

By:

Balmumcu, Fadime I.;
Özdemir, Evren G.;
Merdan, Ziya

Publication type:

Article

Multispectral self-powered below room-temperature ZnS photodetector.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5186, doi. 10.1007/s10853-023-08379-6

By:

Salam, Jishad A.;
Jayakrishnan, R.

Publication type:

Article

An insight into the suitability of magnesium ion-conducting biodegradable methyl cellulose solid polymer electrolyte film in energy storage devices.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5389, doi. 10.1007/s10853-023-08355-0

By:

Koliyoor, Jayalakshmi;
Ismayil;
Hegde, Shreedatta;
Sanjeev, Ganesh;
Murari, Mudiyaru Subrahmanya

Publication type:

Article

Bio-nanocomposites films based on unmodified and modified thermoplastic starch reinforced with chemically modified nanoclays.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5456, doi. 10.1007/s10853-023-08354-1

By:

Guarás, M. P.;
Menossi, M.;
Nicolini, A. Torres;
Alvarez, V. A.;
Ludueña, L. N.

Publication type:

Article

Ultraviolet irradiation confers titanium oxide oleophilicity.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5258, doi. 10.1007/s10853-023-08353-2

By:

Lee, Byeong-Min;
Moon, Wonjoon;
Baek, Kiheon;
Park, Kyou-Hwa;
Chung, Shin Hye;
Chung, Gehoon

Publication type:

Article

Fast fabrication of Janus particles via photo-initiated seeded swelling polymerization and their application in removal of copper(II) ion.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5552, doi. 10.1007/s10853-023-08352-3

By:

Gao, Zheng;
Huang, Chao;
Tang, Ruizhi;
Ma, Shujuan;
Gong, Bolin;
Ou, Junjie

Publication type:

Article

Exploring supervised machine learning for multi-phase identification and quantification from powder X-ray diffraction spectra.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5334, doi. 10.1007/s10853-023-08343-4

By:

Greasley, Jaimie;
Hosein, Patrick

Publication type:

Article

Microfluidics-assisted, time-effective and continuous synthesis of bimetallic ZIF-8/67 under different synthesis conditions.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5219, doi. 10.1007/s10853-023-08342-5

By:

Kevat, Svapnil;
Sutariya, Bhaumik;
Lad, V. N.

Publication type:

Article

The effect of oxidative functionalization of carbon nanotubes on the morphological, optical, and photoelectrochemical properties of modified titanium dioxide photoanodes.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5372, doi. 10.1007/s10853-023-08351-4

By:

Peón-Díaz, Francisco J.;
del Río, Rodrigo Segura;
Hevia, Samuel;
Olivares, Fernanda;
Expósito-Gálvez, Juan Carlos;
Escalante, Renán;
Valadez-Villalobos, Karen;
Riquelme, Antonio J.;
Oskam, Gerko;
Henríquez, Ricardo

Publication type:

Article

Correction: Processing-structure–property relationships of oleanolic acid loaded PLGA fiber membranes.

Published in:

2023

By:

Ahmed, Salahuddin;
Padilla-Gainza, Victoria M.;
Gilkerson, Robert;
Narula, Acharan S.;
Lozano, Karen

Publication type:

Correction Notice

Unveiling the role of trace metal doping in transition metal oxides for boosting oxygen evolution reaction.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5234, doi. 10.1007/s10853-023-08345-2

By:

Yang, Yifan;
Xu, Lixiong;
Wang, Wei;
Han, Rong;
Ma, Jun;
Yao, Mengqin;
Geng, Shuo;
Liu, Fei

Publication type:

Article

Agar/graphene conductive organogel with self-healable, adhesive, and wearable properties.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5287, doi. 10.1007/s10853-023-08344-3

By:

Jiang, Jiwei;
Zhao, Rui;
Wang, Taoping;
Song, Bo;
Chen, Yulian;
Zhang, Hui;
Dong, Bin

Publication type:

Article

Uniformly embedded PtCu alloy nanoparticles on mesoporous carbon nanospheres: a high-efficiency nanozyme for glucose detection.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5244, doi. 10.1007/s10853-023-08347-0

By:

Wei, Na;
Li, Xiaoyuan;
Yin, Hongjie;
Sun, Yunyun;
Jia, Huimin;
Guan, Huijuan;
Gao, Yuanhao

Publication type:

Article

Palladium exsolution and dissolution with lanthanum ferrite perovskite oxides.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5178, doi. 10.1007/s10853-023-08346-1

By:

Taghavi Kouzehkanan, Seyed Morteza;
Hong, Jong-Eun;
Oh, Tae-Sik

Publication type:

Article

Preparation and microstructure analysis of fly ash continuous fiber.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5163, doi. 10.1007/s10853-023-08341-6

By:

Jia, Xiaolong;
Wang, Chong;
Xiong, Guangqi;
Yan, Shen;
Fang, Zheng

Publication type:

Article

N-doped hollow porous carbon nanotubes derived from in situ activation approach for supercapacitor.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5362, doi. 10.1007/s10853-023-08329-2

By:

Wu, Haixia;
Du, Juan;
Chen, Aibing

Publication type:

Article

Effect of creep stress on the high-temperature tensile stability of TC11 titanium alloy.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5503, doi. 10.1007/s10853-023-08307-8

By:

Wang, Hang;
Tan, Changsheng;
Zhao, Juan;
Han, Lihong;
Zhang, Guojun

Publication type:

Article

Bioactive bone scaffolds manufactured by 3D printing and sacrificial templating of poly(ε-caprolactone) composites as filler for bone tissue engineering.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5444, doi. 10.1007/s10853-023-08319-4

By:

Chen, Xiaohong;
Liu, Yujie;
Liu, Hang;
Li, Lei;
Liu, Yubo;
Liu, Ping;
Yang, Xinghai

Publication type:

Article

Metal–organic framework–carbon allotrope composites as emerging effective and superdurable nanofillers: progress in design and application.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5131, doi. 10.1007/s10853-023-08293-x

By:

Verma, Chandrabhan;
Quraishi, Mumtaz A.;
Rhee, Kyong Yop

Publication type:

Article

Repair of surface cracks in 3D-printed porous ceramic skeletons after sintering.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5149, doi. 10.1007/s10853-023-08317-6

By:

Wang, Huan;
Li, Ziyuan;
Shang, Zhen;
Tian, Limei

Publication type:

Article

Identification of a pseudo-ternary intermetallic compound in the stirred zone of friction-stir-welded 5083 aluminum alloy with 316L steel.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5516, doi. 10.1007/s10853-023-08312-x

By:

Celis, Mayerling Martinez;
Harcuba, Petr;
Veselý, Jozef;
Moisy, Florent;
Picot, Florent;
Retoux, Richard;
Domenges, Bernadette;
Hug, Eric

Publication type:

Article

Enhanced acetone sensing performance of Ti3C2 MXene/α-Fe2O3 nanorod composite.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5319, doi. 10.1007/s10853-023-08328-3

By:

Wang, Yun;
Tan, Hongjie;
Sang, Lexian;
Xie, Yunying;
Jia, Fuchao;
Zhou, Tong;
Yin, Guangchao;
Sun, Fazhe;
Wang, Xiaomei

Publication type:

Article

On the elaboration of composite AlSi7Mg0.6/SiC powders and parts by laser powder bed fusion.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5269, doi. 10.1007/s10853-023-08249-1

By:

Manlay, Marie-Reine;
Garandet, Jean-Paul;
Bacchetta, Gatien;
Soulier, Mathieu;
Flament, Camille

Publication type:

Article

Multifunctional composite dressings based on Bletilla striata polysaccharide and zeolite for rapid hemostatic and accelerated wound healing.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5427, doi. 10.1007/s10853-023-08306-9

By:

Zhu, Bingqi;
Cheng, Wen;
Zhao, Kai;
Hu, Zhengbo;
Zhou, Fangmei;
Zhou, Mingyuan;
Qian, Chaodong;
Ding, Zhishan

Publication type:

Article

Mechanical behavior and microstructure evolution of Al/AlCu alloy interface.

Published in:

Journal of Materials Science, 2023, v. 58, n. 12, p. 5489, doi. 10.1007/s10853-023-08200-4

By:

Li, Bo;
Zhang, Zhengyun;
Zhou, Xiaolong;
Liu, Manmen;
Jie, Yu

Publication type:

Article

Works matching IS 00222461 AND DT 2023 AND VI 58 AND IP 12

Two-dimensional Nb<sub>2</sub>CTx nanosheets decorated LiFePO<sub>4</sub>/C as cathode material for lithium-ion batteries.

Microstructure evolution, deformation behavior and processing performance of TNM TiAl alloy.

High-temperature mechanical behavior of partially sintered ceramics.

Life cycle assessment of nanocomposite manufactured using ultrasonic stir casting.

Bioactive functional sericin/polyvinyl alcohol hydrogel: biomaterials for supporting orthopedic surgery in osteomyelitis.

Structural, half-metallic, electronic, magnetic and pressure-induced elastic changes of PdVSi, PdVGe, PdVSn, and PdVSb alloys.

Multispectral self-powered below room-temperature ZnS photodetector.

An insight into the suitability of magnesium ion-conducting biodegradable methyl cellulose solid polymer electrolyte film in energy storage devices.

Bio-nanocomposites films based on unmodified and modified thermoplastic starch reinforced with chemically modified nanoclays.

Ultraviolet irradiation confers titanium oxide oleophilicity.

Fast fabrication of Janus particles via photo-initiated seeded swelling polymerization and their application in removal of copper(II) ion.

Exploring supervised machine learning for multi-phase identification and quantification from powder X-ray diffraction spectra.

Microfluidics-assisted, time-effective and continuous synthesis of bimetallic ZIF-8/67 under different synthesis conditions.

The effect of oxidative functionalization of carbon nanotubes on the morphological, optical, and photoelectrochemical properties of modified titanium dioxide photoanodes.

Correction: Processing-structure–property relationships of oleanolic acid loaded PLGA fiber membranes.

Unveiling the role of trace metal doping in transition metal oxides for boosting oxygen evolution reaction.

Agar/graphene conductive organogel with self-healable, adhesive, and wearable properties.

Uniformly embedded PtCu alloy nanoparticles on mesoporous carbon nanospheres: a high-efficiency nanozyme for glucose detection.

Palladium exsolution and dissolution with lanthanum ferrite perovskite oxides.

Preparation and microstructure analysis of fly ash continuous fiber.

N-doped hollow porous carbon nanotubes derived from in situ activation approach for supercapacitor.

Effect of creep stress on the high-temperature tensile stability of TC11 titanium alloy.

Bioactive bone scaffolds manufactured by 3D printing and sacrificial templating of poly(ε-caprolactone) composites as filler for bone tissue engineering.

Metal–organic framework–carbon allotrope composites as emerging effective and superdurable nanofillers: progress in design and application.

Repair of surface cracks in 3D-printed porous ceramic skeletons after sintering.

Identification of a pseudo-ternary intermetallic compound in the stirred zone of friction-stir-welded 5083 aluminum alloy with 316L steel.

Enhanced acetone sensing performance of Ti<sub>3</sub>C<sub>2</sub> MXene/α-Fe<sub>2</sub>O<sub>3</sub> nanorod composite.

On the elaboration of composite AlSi<sub>7</sub>Mg<sub>0.6</sub>/SiC powders and parts by laser powder bed fusion.

Multifunctional composite dressings based on Bletilla striata polysaccharide and zeolite for rapid hemostatic and accelerated wound healing.

Mechanical behavior and microstructure evolution of Al/AlCu alloy interface.