Works matching IS 00222461 AND DT 2021 AND VI 56 AND IP 34

Results: 30

Structural, optical and magnetic study of Eu2+ doped SnO2 nanosystems: an experimental and DFT based investigation.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18911, doi. 10.1007/s10853-021-06586-7

By:

Shukla, Nishant;
Chetri, Pawan;
Ahmed, Gazi A.

Publication type:

Article

Structure, thermal and mechanical properties of copoly(ester amide)s based on 2,5‐furandicarboxylic acid.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19296, doi. 10.1007/s10853-021-06576-9

By:

Zubkiewicz, Agata;
Irska, Izabela;
Miadlicki, Piotr;
Walkowiak, Konrad;
Rozwadowski, Zbigniew;
Paszkiewicz, Sandra

Publication type:

Article

Biocompatible mesoporous polymeric ionic liquid with high adsorption capacity for selective isolation of ovalbumin.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19283, doi. 10.1007/s10853-021-06529-2

By:

Qi, Shoujing;
Zhang, Chunyu;
Hu, Zhengjie;
Chen, Xuwei

Publication type:

Article

Low temperature super ductility and threshold stress of an ultrafine-grained Al–Zn–Mg–Zr alloy processed by equal-channel angular pressing.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19244, doi. 10.1007/s10853-021-06527-4

By:

Boldizsár, Bálint;
Jenei, Péter;
Ahmed, Anwar Q.;
Murashkin, Maxim Yu.;
Valiev, Ruslan Z.;
Chinh, Nguyen Q.

Publication type:

Article

Epitaxial pyrolytic carbon coatings templated with defective carbon nanotube cores for structural annealing and tensile property improvement.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19015, doi. 10.1007/s10853-021-06523-8

By:

Liu, Fan;
Shirasu, Keiichi;
Hashida, Toshiyuki

Publication type:

Article

Adsorption of cellulases on pulp fibers during pretreatment for microfibrillated cellulose film preparation.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19267, doi. 10.1007/s10853-021-06522-9

By:

Zhang, Zhengjian;
Wang, Xiaojuan;
Gao, Meng;
Yan, Hongyue;
Qiu, Lixin

Publication type:

Article

Porous organic polymer/MMT hybrid supports for efficient metallocene catalysts.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19253, doi. 10.1007/s10853-021-06518-5

By:

Wang, Xiong;
Kang, Wenqian;
Li, Guangquan;
Zhang, Pingsheng;
Jia, Huiqing;
Gao, Dujuan

Publication type:

Article

Photocatalytic CO2 reduction to CO and CH4 using g-C3N4/RGO on titania nanotube arrays (TNTAs).

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18989, doi. 10.1007/s10853-021-06516-7

By:

Ikreedeegh, Riyadh Ramadhan;
Tahir, Muhammad

Publication type:

Article

Co-catalyst free SrTiO3 nano-cube for efficient photocatalytic hydrogen production.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18976, doi. 10.1007/s10853-021-06510-z

By:

Ganapathy, Mano;
Hsu, Yang;
Thomas, Joy;
Chang, Chang Tang;
Alagan, Viswanathan

Publication type:

Article

Review: Textile-based natural fibre-reinforced polymeric composites in automotive lightweighting.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18867, doi. 10.1007/s10853-021-06509-6

By:

Olhan, Sandeep;
Khatkar, Vikas;
Behera, B. K.

Publication type:

Article

Silk fibroin protein as dual mode picric acid sensor and UV photoactive material.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18959, doi. 10.1007/s10853-021-06506-9

By:

Hazarika, Indranee;
Goswami, Kangkan Jyoti;
Hussain, Amreen Ara;
Kalita, Tapash;
Sarma, Neelotpal Sen;
Gogoi, Bedanta

Publication type:

Article

Shear exfoliation of large-size GO sheets for high-performance films.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18946, doi. 10.1007/s10853-021-06504-x

By:

Weng, Chengjie;
Wu, Jian;
Shen, Liming;
Bao, Ningzhong

Publication type:

Article

Recent advances in efficient emissive materials-based OLED applications: a review.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18837, doi. 10.1007/s10853-021-06503-y

By:

Bauri, Jayanta;
Choudhary, Ram Bilash;
Mandal, Gobind

Publication type:

Article

Production of polylactic acid aerogels via phase separation and supercritical CO2 drying: thermodynamic analysis of the gelation and drying process.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18926, doi. 10.1007/s10853-021-06501-0

By:

Bueno, Alberto;
Luebbert, Christian;
Enders, Sabine;
Sadowski, Gabriele;
Smirnova, Irina

Publication type:

Article

Microstructure–property relation and machine learning prediction of hole expansion capacity of high-strength steels.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19228, doi. 10.1007/s10853-021-06496-8

By:

Li, Wei;
Vittorietti, Martina;
Jongbloed, Geurt;
Sietsma, Jilt

Publication type:

Article

Pulsed electric current joining of oxide-dispersion-strengthened austenitic steels.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19216, doi. 10.1007/s10853-021-06495-9

By:

Wang, Fei;
Yan, Xueliang;
Chen, Xin;
Snyder, Nathan;
Nastasi, Michael;
Hattar, Khalid;
Cui, Bai

Publication type:

Article

A visco-plastic self-consistent analysis of tailored texture on plastic deformation behavior of AZ31 magnesium alloy sheet.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19199, doi. 10.1007/s10853-021-06493-x

By:

Hu, Li;
Shi, Laixin;
Zhou, Tao;
Li, Mingao;
Chen, Qiang;
Yang, Mingbo

Publication type:

Article

Thermodynamics-based analysis of formation and growth of FeTi and β-Ti during friction stir welding of SS304 and pure titanium.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19180, doi. 10.1007/s10853-021-06491-z

By:

Gotawala, Nikhil;
Shrivastava, Amber

Publication type:

Article

Simultaneous effects of external stimuli on preparation and performance parameters of normally transparent reverse mode polymer-dispersed liquid crystals—a review.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 18795, doi. 10.1007/s10853-021-06489-7

By:

Sharma, Vandna;
Kumar, Pankaj;
Raina, Kuldeep Kumar

Publication type:

Article

Modelling and experimental validation of austenite growth from As-quenched martensite during intercritical annealing of a medium-Mn steel.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19165, doi. 10.1007/s10853-021-06482-0

By:

Lin, Guanqiang;
Lan, Huifang;
Du, Linxiu

Publication type:

Article

Simultaneous improved polarization and breakdown strength in Mn/W co-doped silver niobate ceramics.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19155, doi. 10.1007/s10853-021-06465-1

By:

Fan, Xuhui;
Wang, Jing;
Rao, Yu;
Zhao, Lei;
Zhu, Kongjun

Publication type:

Article

Vertical Fe(OH)3/Ni9S8 nanoarrays electrodeposited on stainless steel as binder-free electrocatalyst for highly efficient and stable oxygen evolution reaction.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19144, doi. 10.1007/s10853-021-06460-6

By:

Chen, Xin;
Wang, Xinqiang;
Zhang, Xiaojuan;
Srinivas, Katam;
Liu, Dawei;
Zhao, Xingchuan;
Yu, Hesheng;
Wang, Bin;
Zhang, Wanli;
Chen, Yuanfu

Publication type:

Article

Effect of grain–grain boundary on ZnO nanorod-based UV photosensor: a complex impedance spectroscopic study.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19128, doi. 10.1007/s10853-021-06459-z

By:

Ghosh, Ria;
Majumder, Rahul;
Kundu, Soumalya;
Pradhan, Monalisa;
Roy, Subhadip;
Gayen, Rabindranath;
Pal Chowdhury, Manish

Publication type:

Article

Polyamide 6/modified pine bark particle composites for additive manufacturing.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19093, doi. 10.1007/s10853-021-06443-7

By:

Gama, Nuno;
Ferreira, Artur;
Barros-Timmons, Ana;
Evtuguin, Dmitry

Publication type:

Article

Liquid-phase deposition functionalized wood sponges for oil/water separation.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19075, doi. 10.1007/s10853-021-06440-w

By:

Liu, Ying;
Huang, Yanhui;
Huang, Quanfei;
Li, Fan;
Liu, Xianmiao

Publication type:

Article

Optimization of cycling performance of hollow Cu2S@NC cubes anode for lithium-ion batteries in ether-based electrolyte.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19119, doi. 10.1007/s10853-021-06437-5

By:

Han, Jianqiang;
Ren, Jing

Publication type:

Article

A novel electrochemical sensor via Zr-based metal organic framework–graphene for pesticide detection.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19060, doi. 10.1007/s10853-021-06436-6

By:

Gao, Nan;
Tan, Runan;
Cai, Zhiwei;
Zhao, Hui;
Chang, Gang;
He, Yunbin

Publication type:

Article

Investigation of the aging effect of electrolyte on the morphology and photocatalytic properties of TiO2NTs synthesized using the anodization route.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19106, doi. 10.1007/s10853-021-06433-9

By:

Luan, Nhat Huy;
Chang, Chiung-Fen

Publication type:

Article

Effect of TiB2 addition on microstructure and mechanical properties of a hypereutectic high chromium cast iron.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19047, doi. 10.1007/s10853-021-06429-5

By:

Jain, Abhi-Shek;
Chang, Haiwei;
Zhang, Ming-Xing

Publication type:

Article

Structure–property correlation in a novel ZrB2–SiC ultrahigh-temperature ceramic composite with Al-alloy sinter additive.

Published in:

Journal of Materials Science, 2021, v. 56, n. 34, p. 19029, doi. 10.1007/s10853-021-06427-7

By:

Sengupta, P.;
Basu, S.;
Manna, I.

Publication type:

Article

Works matching IS 00222461 AND DT 2021 AND VI 56 AND IP 34

Structural, optical and magnetic study of Eu<sup>2+</sup> doped SnO<sub>2</sub> nanosystems: an experimental and DFT based investigation.

Structure, thermal and mechanical properties of copoly(ester amide)s based on 2,5‐furandicarboxylic acid.

Biocompatible mesoporous polymeric ionic liquid with high adsorption capacity for selective isolation of ovalbumin.

Low temperature super ductility and threshold stress of an ultrafine-grained Al–Zn–Mg–Zr alloy processed by equal-channel angular pressing.

Epitaxial pyrolytic carbon coatings templated with defective carbon nanotube cores for structural annealing and tensile property improvement.

Adsorption of cellulases on pulp fibers during pretreatment for microfibrillated cellulose film preparation.

Porous organic polymer/MMT hybrid supports for efficient metallocene catalysts.

Photocatalytic CO<sub>2</sub> reduction to CO and CH<sub>4</sub> using g-C<sub>3</sub>N<sub>4</sub>/RGO on titania nanotube arrays (TNTAs).

Co-catalyst free SrTiO<sub>3</sub> nano-cube for efficient photocatalytic hydrogen production.

Review: Textile-based natural fibre-reinforced polymeric composites in automotive lightweighting.

Silk fibroin protein as dual mode picric acid sensor and UV photoactive material.

Shear exfoliation of large-size GO sheets for high-performance films.

Recent advances in efficient emissive materials-based OLED applications: a review.

Production of polylactic acid aerogels via phase separation and supercritical CO<sub>2</sub> drying: thermodynamic analysis of the gelation and drying process.

Microstructure–property relation and machine learning prediction of hole expansion capacity of high-strength steels.

Pulsed electric current joining of oxide-dispersion-strengthened austenitic steels.

A visco-plastic self-consistent analysis of tailored texture on plastic deformation behavior of AZ31 magnesium alloy sheet.

Thermodynamics-based analysis of formation and growth of FeTi and β-Ti during friction stir welding of SS304 and pure titanium.

Simultaneous effects of external stimuli on preparation and performance parameters of normally transparent reverse mode polymer-dispersed liquid crystals—a review.

Modelling and experimental validation of austenite growth from As-quenched martensite during intercritical annealing of a medium-Mn steel.

Simultaneous improved polarization and breakdown strength in Mn/W co-doped silver niobate ceramics.

Vertical Fe(OH)<sub>3</sub>/Ni<sub>9</sub>S<sub>8</sub> nanoarrays electrodeposited on stainless steel as binder-free electrocatalyst for highly efficient and stable oxygen evolution reaction.

Effect of grain–grain boundary on ZnO nanorod-based UV photosensor: a complex impedance spectroscopic study.

Polyamide 6/modified pine bark particle composites for additive manufacturing.

Liquid-phase deposition functionalized wood sponges for oil/water separation.

Optimization of cycling performance of hollow Cu<sub>2</sub>S@NC cubes anode for lithium-ion batteries in ether-based electrolyte.

A novel electrochemical sensor via Zr-based metal organic framework–graphene for pesticide detection.

Investigation of the aging effect of electrolyte on the morphology and photocatalytic properties of TiO<sub>2</sub>NTs synthesized using the anodization route.

Effect of TiB<sub>2</sub> addition on microstructure and mechanical properties of a hypereutectic high chromium cast iron.

Structure–property correlation in a novel ZrB<sub>2</sub>–SiC ultrahigh-temperature ceramic composite with Al-alloy sinter additive.