Works matching IS 00222461 AND DT 2020 AND VI 55 AND IP 8

Results: 40

Stone–Wales defect interaction in quasistatically deformed 2D silica.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3470, doi. 10.1007/s10853-019-04274-1

By:

Ebrahem, Firaz;
Bamer, Franz;
Markert, Bernd

Publication type:

Article

Enhancement of thermal and mechanical performances of epoxy nanocomposite materials based on graphene oxide grafted by liquid crystalline monomer with Schiff base.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3712, doi. 10.1007/s10853-019-04273-2

By:

Hu, Bing;
Cong, Yue-hua;
Zhang, Bao-yan;
Zhang, Lei;
Shen, Yu;
Huang, Hao-zhou

Publication type:

Article

Numerical investigation of graphene-based efficient and broadband metasurface for terahertz solar absorber.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3462, doi. 10.1007/s10853-019-04269-y

By:

Jadeja, Rajendrasinh;
Charola, Shreyas;
Patel, Shobhit K.;
Parmar, Juveriya;
Ladumor, Mayurkumar;
Nguyen, Truong Khang;
Dhasarathan, Vigneswaran

Publication type:

Article

Effect of graphene oxide (GO) on the hydration and dissolution of alite in a synthetic cement system.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3419, doi. 10.1007/s10853-019-04266-1

By:

Zhu, Xiaohong;
Kang, Xiaojuan

Publication type:

Article

Influences of particle fractions on second-phase particles pinning grain coarsening processes.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3434, doi. 10.1007/s10853-019-04262-5

By:

Li, Zhiqiang;
Wang, Junsheng;
Huang, Houbing

Publication type:

Article

Challenges to model the role of heterogeneities on the shock response and spall failure of metallic materials at the mesoscales.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3157, doi. 10.1007/s10853-019-04260-7

By:

Dongare, Avinash M.

Publication type:

Article

Molecular imprinted polymer-wrapped AgNPs-decorated acid-functionalized graphene oxide as a potent electrochemical sensor for ibuprofen.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3700, doi. 10.1007/s10853-019-04258-1

By:

Nair, Archana S.;
Sooraj, M. P.

Publication type:

Article

The influence of stabilization efficiency on skin–core structure and properties of polyacrylonitrile fibers.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3408, doi. 10.1007/s10853-019-04257-2

By:

Sun, Lihao;
Shang, Lei;
Xiao, Linghan;
Zhang, Mengjie;
Ao, Yuhui;
Li, Ming

Publication type:

Article

Modeling the effect of oxidation on the residual tensile strength of SiC/C/SiC minicomposites in stressed oxidizing environments.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3388, doi. 10.1007/s10853-019-04255-4

By:

Chen, Xihui;
Sun, Zhigang;
Li, Hongyu;
Song, Yingdong;
Niu, Xuming

Publication type:

Article

Mechanical properties of graphene-reinforced reactive powder concrete at different strain rates.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3369, doi. 10.1007/s10853-019-04246-5

By:

Wang, Jialiang;
Dong, Sufen;
Yu, Xun;
Han, Baoguo

Publication type:

Article

Effect of H bonds on thermal behavior and cohesion in polylactic acid nanocomposites and nitrogen-doped carbon nanotubes.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3354, doi. 10.1007/s10853-019-04245-6

By:

Montes-Zavala, I.;
Castrejón-González, E. O.;
Sánchez-Balderas, G.;
Pérez, E.;
González-Calderón, J. A.

Publication type:

Article

Synthesis of Sn2Nb2O7-GO nanocomposite as an anode material with enhanced lithium storage performance.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3561, doi. 10.1007/s10853-019-04220-1

By:

Kong, Xingang;
Ma, Dingying;
Zhang, Jiarui;
Gong, Qinqin;
Wang, Yong;
Feng, Qi

Publication type:

Article

A simple way to use X-ray micro-tomography to infer elastic properties of heterogeneous materials: application to sedimentary rocks.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3347, doi. 10.1007/s10853-019-04241-w

By:

Valdenaire, Pierre-Louis;
Perrin, Jonathan;
Grauby, Olivier;
Ulm, Franz-Josef;
Pellenq, Roland J. M.

Publication type:

Article

Fatigue–creep behavior of two ferritic stainless steels in simulated automotive exhaust gas and argon.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3684, doi. 10.1007/s10853-019-04233-w

By:

Liu, Tianlong;
Zhu, Xiaofei;
Chen, Lijia;
Bi, Hongyun;
Lin, Yingfei;
Long, Jun

Publication type:

Article

Master sintering curves of nickel-titanium and nickel-titanium open-cell foams fabricated by spark plasma sintering.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3668, doi. 10.1007/s10853-019-04226-9

By:

Nivala, Peter T.;
James, Susan P.

Publication type:

Article

Synthesis of heterostructure δ-MnO2/h-MoO3 nanocomposite and the enhanced photodegradation activity of methyl orange in aqueous solutions.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3329, doi. 10.1007/s10853-019-04225-w

By:

Zou, Jian;
Wu, Kun;
Wu, Huadong;
Guo, Jia;
Zhang, Linfeng

Publication type:

Article

Effect of high-temperature supercritical carbon dioxide exposure on the microstructure and tensile properties of diffusion-bonded Alloy 690.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3652, doi. 10.1007/s10853-019-04222-z

By:

Chen, Hongsheng;
Kim, Sung Hwan;
Jang, Changheui

Publication type:

Article

Nanocatalyst-induced hydroxyl radical (·OH) slurry for tungsten CMP for next-generation semiconductor processing.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3450, doi. 10.1007/s10853-019-04239-4

By:

Poddar, Maneesh Kumar;
Ryu, Heon-Yul;
Yerriboina, Nagendra Prasad;
Jeong, Yeon-Ah;
Lee, Jung-Hwan;
Kim, Tae-Gon;
Kim, Jae-Hyun;
Park, Jong-Dai;
Lee, Min-Gun;
Park, Chang-Yong;
Han, Seong-Jun;
Choi, Jae-Gon;
Park, Jin-Goo

Publication type:

Article

Polydopamine modification electrospun polyacrylonitrile fibrous membrane with decreased pore size and dendrite mitigation for lithium ion battery.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3549, doi. 10.1007/s10853-019-04218-9

By:

Gao, Yue;
Sang, Xiao;
Chen, Yifan;
Li, Yue;
Liu, Bingbing;
Sheng, Junlu;
Feng, Yong;
Li, Lei;
Liu, Haiqing;
Wang, Xiangwei;
Kuang, Chunxia;
Zhai, Yunyun

Publication type:

Article

Centrifugally spun porous carbon microfibers as interlayer for Li–S batteries.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3538, doi. 10.1007/s10853-019-04215-y

By:

Yanilmaz, Meltem;
Asiri, Abdullah M.;
Zhang, Xiangwu

Publication type:

Article

Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3636, doi. 10.1007/s10853-019-04214-z

By:

Liang, Xiaoliang;
Liu, Zhanqiang;
Wang, Qingqing;
Wang, Bing;
Ren, Xiaoping

Publication type:

Article

Fabrication of highly stable CdS/g-C3N4 composite for enhanced photocatalytic degradation of RhB and reduction of CO2.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3299, doi. 10.1007/s10853-019-04208-x

By:

Li, Xin;
Edelmannová, Miroslava;
Huo, Pengwei;
Kočí, Kamila

Publication type:

Article

The effect of stress on surface and interface segregation in thin alloy films on inert substrates.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3629, doi. 10.1007/s10853-019-04207-y

By:

Klinger, Leonid;
Wang, Jiangyong;
Rabkin, Eugen

Publication type:

Article

Hydrogen evolution from photocatalytic water splitting by LaMnO3 modified with amorphous CoSx.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3521, doi. 10.1007/s10853-019-04205-0

By:

Mao, Min;
Xu, Jing;
Li, Yanru;
Liu, Zeying

Publication type:

Article

Highly scattered Ir oxides on TiN as an efficient oxygen evolution reaction electrocatalyst in acidic media.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3507, doi. 10.1007/s10853-019-04201-4

By:

Zhang, Kaikai;
Mai, Wanshan;
Li, Jin;
Wang, Huan;
Li, Guoqiang;
Hu, Wei

Publication type:

Article

Template directed hydrothermal synthesis of flowerlike NiSex/C composites as lithium/sodium ion battery anodes.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3495, doi. 10.1007/s10853-019-04200-5

By:

Zhao, Chenhao;
Shen, Zhen;
Tu, Fengzhang;
Hu, Zhibiao

Publication type:

Article

Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3484, doi. 10.1007/s10853-019-04199-9

By:

Pinsuwan, Kusuma;
Boonthum, Chirapa;
Supasai, Thidarat;
Sahasithiwat, Somboon;
Kumnorkaew, Pisist;
Kanjanaboos, Pongsakorn

Publication type:

Article

Enhanced nanotwinning by special grain growth in nanocrystalline materials.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3618, doi. 10.1007/s10853-019-04194-0

By:

Tan, Fusheng;
Fang, Qihong;
Li, Jia;
Feng, Hui

Publication type:

Article

Interface tailoring of SnO2–TiO2 photocatalysts modified with anionic/cationic surfactants.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3279, doi. 10.1007/s10853-019-04192-2

By:

Stefan, Maria;
Leostean, Cristian;
Pana, Ovidiu;
Popa, Adriana;
Toloman, Dana;
Macavei, Sergiu;
Perhaita, Ioana;
Barbu-Tudoran, Lucian;
Silipas, Danut

Publication type:

Article

Hydrothermal synthesis of chemically stable cross-linked poly-Schiff base for efficient Cr(VI) removal.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3259, doi. 10.1007/s10853-019-04191-3

By:

Ren, Lili;
Yang, Zhihui;
Jin, Linfeng;
Yang, Weichun;
Shi, Yan;
Wang, Sheng;
Yi, Huimin;
Wei, Dun;
Wang, Haiying;
Zhang, Liyuan

Publication type:

Article

Study on the controlling factors for the quenching crack sensitivity of ultra-strong automotive steel.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3605, doi. 10.1007/s10853-019-04177-1

By:

Hwang, Eun Hye;
Park, Jin Sung;
Kim, Si On;
Seong, Hwang Goo;
Kim, Sung Jin

Publication type:

Article

The effect of Zn/Ca ratio on the microstructure, texture and mechanical properties of dilute Mg–Zn–Ca–Mn alloys that exhibit superior strength.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3588, doi. 10.1007/s10853-019-04174-4

By:

Nie, Kaibo;
Zhu, Zhihao;
Munroe, Paul;
Deng, Kunkun;
Han, Jungang

Publication type:

Article

Polydopamine-coated cellulose acetate butyrate microbeads for caffeine removal.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3243, doi. 10.1007/s10853-019-04169-1

By:

Furtado, Laíse Moura;
Ando, Rômulo Augusto;
Petri, Denise Freitas Siqueira

Publication type:

Article

Mechanical and fracture behaviour of hydroxyl functionalized h-BN nanosheets.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3228, doi. 10.1007/s10853-019-04163-7

By:

Sharma, Bharat Bhushan;
Parashar, Avinash

Publication type:

Article

Fluoro-polymer-coated carbon nanotubes for improved interfacial interactions and dielectric properties in MWCNTs/PVDF composites.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3212, doi. 10.1007/s10853-019-04161-9

By:

Song, Shixin;
Xia, Shan;
Wei, Yingcong;
Lv, Xue;
Sun, Shulin;
Li, Quanming

Publication type:

Article

Photocatalytic performance of mesoporous composites of TiO2–ZrO2 and phosphotungstic acid.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3195, doi. 10.1007/s10853-019-04144-w

By:

Li, Qinlong;
Feng, Caiting;
Wu, Panfeng;
Yuan, Xiaoxiao;
Hu, Huaiming;
Xue, Ganglin

Publication type:

Article

Spatially confined growth of Bi2O4 into hierarchical TiO2 spheres for improved visible light photocatalytic activity.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3181, doi. 10.1007/s10853-019-04143-x

By:

Zhang, Cuiqing;
Ma, Yaya;
Li, Chengyu;
Qin, Feng;
Hu, Changyuan;
Hu, Quanhong;
Duo, Shuwang

Publication type:

Article

Efficient removal of formaldehyde with ZIF-8 growth on TiO2-coated activated carbon fiber felts prepared via atomic layer deposition.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3167, doi. 10.1007/s10853-019-04142-y

By:

Ren, Lipei;
Yu, Yan;
Yang, Yuan;
Zhang, Qian;
Xiao, Xingfang;
Liu, Ruina;
Xu, Weilin

Publication type:

Article

In-vitro corrosion assessment of silicate-coated AZ31 Mg alloy in Earle's solution.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3571, doi. 10.1007/s10853-019-04039-w

By:

Kalaiyarasan, M.;
Saranya, K.;
Rajendran, N.

Publication type:

Article

Mechanical properties and conductivity of graphene/Al-8030 composites with directional distribution of graphene.

Published in:

Journal of Materials Science, 2020, v. 55, n. 8, p. 3314, doi. 10.1007/s10853-019-04017-2

By:

Guo, YuMing;
Yi, DanQing;
Liu, HuiQun;
Wang, Bin;
Jiang, Bo;
Wang, HaiSheng

Publication type:

Article