Works matching IS 00222461 AND DT 2013 AND VI 48 AND IP 10

Results: 31

Structure and morphology of polar and semi-polar pyramidal surfaces coating wurtzite ZnO micro-wires.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3857, doi. 10.1007/s10853-013-7187-y

By:

Tang, Dinghao;
Allard, Lawrence;
Boley, Allison;
Smith, David;
Liu, Jingyue

Publication type:

Article

Effects of fiber gripping methods on the single fiber tensile test: I. Non-parametric statistical analysis.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3623, doi. 10.1007/s10853-013-7142-y

By:

Kim, Jae;
Heckert, N.;
Leigh, Stefan;
Kobayashi, Haruki;
McDonough, Walter;
Rice, Kirk;
Holmes, Gale

Publication type:

Article

Structural, optical, and electrical properties of indium-doped cadmium oxide films prepared by pulsed filtered cathodic arc deposition.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3789, doi. 10.1007/s10853-013-7179-y

By:

Zhu, Yuankun;
Mendelsberg, Rueben;
Zhu, Jiaqi;
Han, Jiecai;
Anders, André

Publication type:

Article

Synthesis of fluorescent PVA/polypyrrole-ZnO nanofibers.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3652, doi. 10.1007/s10853-013-7159-2

By:

Melo, Etelino;
Alves, Kleber;
Junior, Severino;
Melo, Celso

Publication type:

Article

Effect of upset forging on microstructure and tensile properties in a devitrified Al-Ni-Co-Y Alloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3841, doi. 10.1007/s10853-013-7185-0

By:

Gordillo, M.;
Zhang, L.;
Watson, T.;
Aindow, M.

Publication type:

Article

Solvothermal synthesis and upconversion emission of monodisperse ultrasmall SrYbF5 nanocrystals.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3672, doi. 10.1007/s10853-013-7163-6

By:

Gong, Lunjun;
Yang, Jicheng;
Li, Yuyu;
Ma, Mo;
Xu, Changfu;
Ren, Guozhong;
Lin, Jianguo;
Yang, Qibin

Publication type:

Article

Micromechanical modelling of poly(ethylene terephthalate) using a layered two-phase approach.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3769, doi. 10.1007/s10853-013-7177-0

By:

Poluektov, Michael;
Dommelen, Johannes;
Govaert, Leon;
Yakimets, Iryna;
Geers, Marc

Publication type:

Article

Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H2S-CO2-Cl- environment.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3708, doi. 10.1007/s10853-013-7168-1

By:

Ding, Jinhui;
Zhang, Lei;
Li, Dapeng;
Lu, Minxu;
Xue, Junpeng;
Zhong, Wen

Publication type:

Article

The effect of externally applied uniaxial compressive stress on the magnetic properties of power MnZn-ferrites.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3825, doi. 10.1007/s10853-013-7183-2

By:

Tsakaloudi, V.;
Holz, D.;
Zaspalis, V.

Publication type:

Article

Atomic structure of hardening precipitates in an Al-Mg-Zn-Cu alloy determined by HAADF-STEM and first-principles calculations: relation to η-MgZn2.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3638, doi. 10.1007/s10853-013-7158-3

By:

Marioara, Calin;
Lefebvre, Williams;
Andersen, Sigmund;
Friis, Jesper

Publication type:

Article

Synthesis and structural, optical and electrical properties of TiO2/SiO2 nanocomposites.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3700, doi. 10.1007/s10853-013-7167-2

By:

Arun Kumar, D.;
Alex Xavier, J.;
Merline Shyla, J.;
Xavier, Francis

Publication type:

Article

Stress relaxation phenomena in NiCuZn ferrites induced by annealing.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3692, doi. 10.1007/s10853-013-7166-3

By:

Tsakaloudi, V.;
Sakellari, D.;
Zaspalis, V.;
Polychroniadis, E.

Publication type:

Article

Atomic force microscopy nanolithography: fabrication of metallic nano-slits using silicon nitride tips.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3863, doi. 10.1007/s10853-013-7188-x

By:

König, Tobias;
Papke, Thomas;
Kopyshev, Alexey;
Santer, Svetlana

Publication type:

Article

Effect of consolidation pressure on volumetric composition and stiffness of unidirectional flax fibre composites.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3812, doi. 10.1007/s10853-013-7182-3

By:

Aslan, Mustafa;
Mehmood, Shahid;
Madsen, Bo

Publication type:

Article

Microstructure and electrical conductivity in shape and size controlled molybdenum particle thick film.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3760, doi. 10.1007/s10853-013-7175-2

By:

Jung, Youngsoo;
Stevens, Erica;
Ding, Bo;
Kim, Sun-Dong;
Woo, Sang-Kuk;
Lee, Jung-Kun

Publication type:

Article

SiO2/sulfonated poly ether ether ketone (SPEEK) composite nanofiber mat supported proton exchange membranes for fuel cells.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3665, doi. 10.1007/s10853-013-7162-7

By:

Lee, Chanmin;
Jo, Seong;
Choi, Jonghyun;
Baek, Kyung-Youl;
Truong, Yen;
Kyratzis, Ilias;
Shul, Yong-Gun

Publication type:

Article

All-organic PANI-DBSA/PVDF dielectric composites with unique electrical properties.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3737, doi. 10.1007/s10853-013-7172-5

By:

Shehzad, Khurram;
Ul-Haq, Asad;
Ahmad, Shahabaz;
Mumtaz, Muhamamd;
Hussain, Tajamal;
Mujahid, Adnan;
Shah, Asma;
Choudhry, Muhammad;
Khokhar, Irshad;
Ul-Hassan, Sadaf;
Nawaz, Faisal;
Rahman, Faiz;
Butt, Yasir;
Pervaiz, Muhammad

Publication type:

Article

Graphene-encapsulated mesoporous Sn2O composites as high performance anodes for lithium-ion batteries.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3870, doi. 10.1007/s10853-013-7189-9

By:

Jiang, Shuhua;
Yue, Wenbo;
Gao, Ziqi;
Ren, Yu;
Ma, Hui;
Zhao, Xinhua;
Liu, Yunling;
Yang, Xiaojing

Publication type:

Article

Electronic structure, density of electronic states, and the chemical bonding properties of 2,4-dihydroxyl hydrazone crystals (C13H11N3O4).

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3805, doi. 10.1007/s10853-013-7181-4

By:

Reshak, A.;
Kamarudin, H.;
Auluck, S.

Publication type:

Article

DC-conductivity testing combined with photometry for measuring fibre orientations in SFRC.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3745, doi. 10.1007/s10853-013-7174-3

By:

Eik, Marika;
Lõhmus, Karl;
Tigasson, Martin;
Listak, Madis;
Puttonen, Jari;
Herrmann, Heiko

Publication type:

Article

Oxygen incorporation in Ti2AlC thin films studied by electron energy loss spectroscopy and ab initio calculations.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3686, doi. 10.1007/s10853-013-7165-4

By:

Mockute, A.;
Dahlqvist, M.;
Hultman, L.;
Persson, P.;
Rosen, J.

Publication type:

Article

Zn3V2O7(OH)2·2H2O and Zn3(VO4)2 3D microspheres as anode materials for lithium-ion batteries.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3679, doi. 10.1007/s10853-013-7164-5

By:

Zhang, S.;
Xiao, X.;
Lu, M.;
Li, Z.

Publication type:

Article

Mesoporous hydroxyapatite by hard templating of silica and carbon foams for protein release.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3722, doi. 10.1007/s10853-013-7170-7

By:

Moeller-Siegert, Janina;
Parmentier, Julien;
Anselme, Karine;
Vix-Guterl, Cathie

Publication type:

Article

Mechanical properties and water uptake of epoxy-clay nanocomposites containing different clay loadings.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3798, doi. 10.1007/s10853-013-7180-5

By:

Al-Qadhi, M.;
Merah, N.;
Gasem, Z.

Publication type:

Article

Preparation and characterization of electrospun nanofibers based on silk sericin powders.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3731, doi. 10.1007/s10853-013-7171-6

By:

Khan, Md.;
Tsukada, Masuhiro;
Zhang, Xianhua;
Morikawa, Hideaki

Publication type:

Article

An approach to prepare defect-free PES/MFI-type zeolite mixed matrix membranes for CO2/N2 separation.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3782, doi. 10.1007/s10853-013-7178-z

By:

Yu, Jianjia;
Li, Liangxiong;
Liu, Ning;
Lee, Robert

Publication type:

Article

Preparation and characterization of electrospun poly(ε-caprolactone)-poly( l-lactic acid) nanofiber tubes.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3659, doi. 10.1007/s10853-013-7161-8

By:

Khatri, Zeeshan;
Nakashima, Ryu;
Mayakrishnan, Gopiraman;
Lee, Ki-Hoon;
Park, Young-Hwan;
Wei, Kai;
Kim, Ick-Soo

Publication type:

Article

Influence of SiO2 pore structure on phase change enthalpy of shape-stabilized polyethylene glycol/silica composites.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3716, doi. 10.1007/s10853-013-7169-0

By:

Guo, Qiang;
Wang, Tao

Publication type:

Article

Design process for nanomaterials.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3605, doi. 10.1007/s10853-013-7196-x

By:

Chaturvedi, Shalini;
Dave, Pragnesh

Publication type:

Article

Synthesis of platinum single-crystal nanoparticles in water vapor.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3834, doi. 10.1007/s10853-013-7184-1

By:

Cheng, Ting;
Parish, Chad;
More, Karren

Publication type:

Article

Weak ferromagnetic polar phase in the BiFe1-xTixO3 multiferroics.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3852, doi. 10.1007/s10853-013-7186-z

By:

Khomchenko, V.;
Troyanchuk, I.;
Sikolenko, V.;
Paixão, J.

Publication type:

Article

Works matching IS 00222461 AND DT 2013 AND VI 48 AND IP 10

Structure and morphology of polar and semi-polar pyramidal surfaces coating wurtzite ZnO micro-wires.

Effects of fiber gripping methods on the single fiber tensile test: I. Non-parametric statistical analysis.

Structural, optical, and electrical properties of indium-doped cadmium oxide films prepared by pulsed filtered cathodic arc deposition.

Synthesis of fluorescent PVA/polypyrrole-ZnO nanofibers.

Effect of upset forging on microstructure and tensile properties in a devitrified Al-Ni-Co-Y Alloy.

Solvothermal synthesis and upconversion emission of monodisperse ultrasmall SrYbF<sub>5</sub> nanocrystals.

Micromechanical modelling of poly(ethylene terephthalate) using a layered two-phase approach.

Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H<sub>2</sub>S-CO<sub>2</sub>-Cl<sup>-</sup> environment.

The effect of externally applied uniaxial compressive stress on the magnetic properties of power MnZn-ferrites.

Atomic structure of hardening precipitates in an Al-Mg-Zn-Cu alloy determined by HAADF-STEM and first-principles calculations: relation to η-MgZn<sub>2</sub>.

Synthesis and structural, optical and electrical properties of TiO<sub>2</sub>/SiO<sub>2</sub> nanocomposites.

Stress relaxation phenomena in NiCuZn ferrites induced by annealing.

Atomic force microscopy nanolithography: fabrication of metallic nano-slits using silicon nitride tips.

Effect of consolidation pressure on volumetric composition and stiffness of unidirectional flax fibre composites.

Microstructure and electrical conductivity in shape and size controlled molybdenum particle thick film.

SiO<sub>2</sub>/sulfonated poly ether ether ketone (SPEEK) composite nanofiber mat supported proton exchange membranes for fuel cells.

All-organic PANI-DBSA/PVDF dielectric composites with unique electrical properties.

Graphene-encapsulated mesoporous Sn<sub>2</sub>O composites as high performance anodes for lithium-ion batteries.

Electronic structure, density of electronic states, and the chemical bonding properties of 2,4-dihydroxyl hydrazone crystals (C<sub>13</sub>H<sub>11</sub>N<sub>3</sub>O<sub>4</sub>).

DC-conductivity testing combined with photometry for measuring fibre orientations in SFRC.

Oxygen incorporation in Ti<sub>2</sub>AlC thin films studied by electron energy loss spectroscopy and ab initio calculations.

Zn<sub>3</sub>V<sub>2</sub>O<sub>7</sub>(OH)<sub>2</sub>·2H<sub>2</sub>O and Zn<sub>3</sub>(VO<sub>4</sub>)<sub>2</sub> 3D microspheres as anode materials for lithium-ion batteries.

Mesoporous hydroxyapatite by hard templating of silica and carbon foams for protein release.

Mechanical properties and water uptake of epoxy-clay nanocomposites containing different clay loadings.

Preparation and characterization of electrospun nanofibers based on silk sericin powders.

An approach to prepare defect-free PES/MFI-type zeolite mixed matrix membranes for CO<sub>2</sub>/N<sub>2</sub> separation.

Preparation and characterization of electrospun poly(ε-caprolactone)-poly( l-lactic acid) nanofiber tubes.

Influence of SiO<sub>2</sub> pore structure on phase change enthalpy of shape-stabilized polyethylene glycol/silica composites.

Design process for nanomaterials.

Synthesis of platinum single-crystal nanoparticles in water vapor.

Weak ferromagnetic polar phase in the BiFe<sub>1-x</sub>Ti<sub>x</sub>O<sub>3</sub> multiferroics.