Works matching IS 00222461 AND DT 2011 AND VI 46 AND IP 23

Results: 37

Simple morphology-controlled synthesis of hollow carbonaceous particles.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7639, doi. 10.1007/s10853-011-5818-8

By:

Quan Jin;
Mingtao Zheng;
Yongjian Wu;
Chunlin Xie;
Yong Xiao;
Yingliang Liu

Publication type:

Article

Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7633, doi. 10.1007/s10853-011-5741-z

By:

Tavoosi, M.;
Karimzadeh, F.;
Enayati, M. H.;
Joo, S.-H.;
Kim, H. S.

Publication type:

Article

Imaging mechanism of carbon nanotubes on insulating and conductive substrates using a scanning electron microscope.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7626, doi. 10.1007/s10853-011-5740-0

By:

Li, W.;
Zhou, Y.;
Fitting, H.-J.;
Bauhofer, W.

Publication type:

Article

Splitting and broadening of the emission bands of Y2O3:Eu3+,Nd3+ and its dependence on Nd3+ concentration and annealing temperature.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7620, doi. 10.1007/s10853-011-5739-6

By:

Wangdong Liu;
Hanchao Wang;
Shiping Zhan;
Wenbin Li

Publication type:

Article

Effect of salt composition on photovoltaic performance of the dye-sensitized solar cells prepared from nano anatase TiO2 powder using NaCl-Na2HPO4·2H2O salt matrices.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7611, doi. 10.1007/s10853-011-5738-7

By:

Roy, B.;
Li, L.;
Aich, S.

Publication type:

Article

Formation of semitransparent CuAlSe2 thin films grown on transparent conducting oxide substrates by selenization.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7603, doi. 10.1007/s10853-011-5736-9

By:

López-García, J.;
Guillén, C.

Publication type:

Article

Important aspects influencing stability of the electrochemical potential of conductive polymer-based electrodes.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7594, doi. 10.1007/s10853-011-5735-x

By:

Shishkanova, Tatiana V.;
Broncova, Gabriela;
Krondak, Martin;
Sykora, David;
Kral, Vladimir

Publication type:

Article

Investigation of the effect of relative humidity on polymers by depth sensing indentation.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7551, doi. 10.1007/s10853-011-5729-8

By:

Altaf, K.;
Ashcroft, Ian A.;
Hague, Richard

Publication type:

Article

Local inhomogeneity and surface degradation of Fe1.15Te and Fe1.03Te0.62Se0.38 single crystals.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7582, doi. 10.1007/s10853-011-5733-z

By:

Rajasekaran, S. V.;
Tite, T.;
Chang, Y.-M.;
Sankar, R.;
Chou, F. C.

Publication type:

Article

Fatigue crack growth characteristics of a new Ni-Co-base superalloy TMW-4M3: effects of temperature and load ratio.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7573, doi. 10.1007/s10853-011-5732-0

By:

Zhong, Zhihong;
Gu, Yuefeng;
Osada, Toshio;
Yuan, Yong;
Cui, Chuanyong;
Yokokawa, Tadaharu;
Tetsui, Toshimitsu;
Harada, Hiroshi

Publication type:

Article

Magnetic properties of Fe78.4Si9.5B9Cu0.6Nb2.5 nanocrystalline alloy powder cores.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7567, doi. 10.1007/s10853-011-5731-1

By:

Zhou, J.;
Cui, Y. F.;
Liu, H. S.;
Wang, W.;
Peng, K.;
Xiao, Y. D.

Publication type:

Article

Evaluation of the thixoformability of the A332 Alloy (Al-9.5 wt%Si-2.5 wt%Cu).

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7558, doi. 10.1007/s10853-011-5730-2

By:

Zoqui, Eugênio José;
Antônio Naldi, Marco

Publication type:

Article

Influence of sputtering pressure on the structure and ionic conductivity of thin film amorphous electrolyte.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7588, doi. 10.1007/s10853-011-5734-y

By:

Zongqian Hu;
Kai Xie;
Di Wei;
Najeeb Ullah

Publication type:

Article

Tailoring coercivity and magnetic anisotropy of Co nanowire arrays by microstructure.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7545, doi. 10.1007/s10853-011-5727-x

By:

Yong Ren;
Jianbo Wang;
Qingfang Liu;
Yingying Dai;
Bin Zhang;
Longgang Yan

Publication type:

Article

Effects of stretching processing parameters on the mean elongation ratio and maximum spread ratio of heavy forgings.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7536, doi. 10.1007/s10853-011-5726-y

By:

Lin, Y. C.;
Din, Y.;
Yan-Xiang Fu;
Ming-Song Chen;
Yu-Chi Xia;
Lei-Ting Li;
Yu-Qiang Jiang

Publication type:

Article

The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7525, doi. 10.1007/s10853-011-5724-0

By:

Hsieh, T. H.;
Kinloch, A. J.;
Taylor, A. C.;
Kinloch, I. A.

Publication type:

Article

Electrospinning preparation and photoluminescence properties of SrAl2O4:Ce3+ nanowires.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7517, doi. 10.1007/s10853-011-5723-1

By:

Ruifang Zheng;
Lin Xu;
Weifeng Qin;
Jiansheng Chen;
Biao Dong;
Ligong Zhang;
Hongwei Song

Publication type:

Article

Encapsulation of α-cyano-4-hydroxycinnamic acid into a NaY zeolite.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7511, doi. 10.1007/s10853-011-5722-2

By:

Vilaça, Natália;
Amorim, Ricardo;
Martinho, Olga;
Reis, Rui M.;
Baltazar, Fátima;
Fonseca, António M.;
Neves, Isabel C.

Publication type:

Article

Evaluation of electrospun nanofiber formation of perfluorosulfonic acid and poly (N-vinylpyrrolidone) through solution rheology.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7501, doi. 10.1007/s10853-011-5721-3

By:

Junhong Zhao;
Anhou Xu;
Wang Zhang Yuan;
Jianbing Gao;
Junke Tang;
Li Wang;
Fei Ai;
Yongming Zhang

Publication type:

Article

Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7489, doi. 10.1007/s10853-011-5719-x

By:

Kumar, Sandeep;
Satapathy, Bhabani K.;
Patnaik, Amar

Publication type:

Article

Low-cost quasi-solid-state dye-sensitized solar cells based on a metal-free organic dye and a carbon aerogel counter electrode.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7482, doi. 10.1007/s10853-011-5718-y

By:

Zhuo Tan;
Bin Zhao;
Ping Shen;
Shenghui Jiang;
Peng Jiang;
Xianyou Wang;
Songting Tan

Publication type:

Article

Soft-type polyurethane foams derived from molasses.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7475, doi. 10.1007/s10853-011-5717-z

By:

Hatakeyama, Hyoe;
Marusawa, Takahiro;
Hatakeyama, Tatsuko

Publication type:

Article

Adsorption and desorption of a gold-iodide complex onto cellulose acetate membrane coated with polyaniline or polypyrrole: a comparative study.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7466, doi. 10.1007/s10853-011-5714-2

By:

Castillo-Ortega, M. M.;
Santos-Sauceda, I.;
Encinas, J. C.;
Rodriguez-Felix, D. E.;
del Castillo-Castro, T.;
Rodriguez-Felix, F.;
Valenzuela-García, J. L.;
Quiroz-Castillo, L. S.;
Herrera-Franco, P. J.

Publication type:

Article

Divalent cation diffusion in calcium fluorapatite.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7459, doi. 10.1007/s10853-011-5712-4

By:

Jay, Eleanor E.;
Mallinson, Phillip M.;
Fong, Shirley K.;
Metcalfe, Brian L.;
Grimes, Robin W.

Publication type:

Article

Thermal and dynamic mechanical properties of blends of bitumen with metallocene catalyzed polyolefins.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7449, doi. 10.1007/s10853-011-5711-5

By:

Spadaro, Chiara;
Plummer, Christopher J. G.;
Månson, Jan-Anders E.

Publication type:

Article

Synthesis, structure, and properties of the non-centrosymmetric borate Rb2CaB8O26H24.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7443, doi. 10.1007/s10853-011-5710-6

By:

Jiang Luo;
Shilie Pan;
Hongyi Li;
Zhongxiang Zhou;
Zhihua Yang

Publication type:

Article

Study of intrinsic white light emission and its components from ZnO-nanorods/p-polymer hybrid junctions grown on glass substrates.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7437, doi. 10.1007/s10853-011-5708-0

By:

Hussain, I.;
Bano, N.;
Hussain, S.;
Nur, O.;
Willander, M.

Publication type:

Article

Chromium influence on rhombohedral twinning in sapphire.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7431, doi. 10.1007/s10853-011-5706-2

By:

Castillo-Rodríguez, M.;
Muñoz, A.;
Castaing, J.;
Veyssière, P.;
Domínguez-Rodríguez, A.

Publication type:

Article

Characterization of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7423, doi. 10.1007/s10853-011-5705-3

By:

Anandhan, S.;
Patil, Harsha G.;
Rajesh Babu, R.

Publication type:

Article

X-ray photoelectron study on Ba0.5Sr0.5CoxFe1-xO3-δ (BSCF: x = 0.2 and 0.8) ceramics annealed at different temperature and pO2.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7415, doi. 10.1007/s10853-011-5704-4

By:

Jae-Il Jung;
Edwards, Doreen D.

Publication type:

Article

Modelling the effect of carbon on deformation behaviour of twinning induced plasticity steels.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7410, doi. 10.1007/s10853-011-5703-5

By:

Huang, Mingxin;
Bouaziz, Olivier;
Barbier, David;
Allain, Sebastien

Publication type:

Article

Surface form memory by indentation and planarization of NiTi: displacements and mechanical energy density during constrained recovery.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7401, doi. 10.1007/s10853-011-5702-6

By:

Xueling Fei;
O'Connell, Corey J.;
Grummon, D. S.;
Yang-Tse Cheng

Publication type:

Article

Hydrogen peroxide versus water synthesis of bioglass--nanocrystalline hydroxyapatite composites.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7393, doi. 10.1007/s10853-011-5700-8

By:

Melinte, G.;
Baia, L.;
Simon, V.;
Simon, S.

Publication type:

Article

Urea effect on the mechanism of mullite crystallization.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7384, doi. 10.1007/s10853-011-5699-x

By:

Cividanes, L. S.;
Brunelli, D. D.;
Bertran, C. A.;
Campos, T. M. B.;
Thim, G. P.

Publication type:

Article

An experimental refinement of solid-solution relationship in Ca-α-Sialon ceramics by analytical electron microscopy.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7377, doi. 10.1007/s10853-011-5698-y

By:

Bo Zhu;
Hui Gu;
Pei-ling Wang

Publication type:

Article

Microstructure and properties of in situ nanostructured ceramic matrix composite coating prepared by plasma spraying.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7369, doi. 10.1007/s10853-011-5697-z

By:

Xueguang Chen;
Yong Yang;
Dianran Yan;
Yanchun Dong;
Lei Wang;
Jining He;
Jianxin Zhang;
Xiangzhi Li

Publication type:

Article

Wood--a 45th anniversary review of JMS papers. Part 1: The wood cell wall and mechanical properties.

Published in:

Journal of Materials Science, 2011, v. 46, n. 23, p. 7357, doi. 10.1007/s10853-011-5856-2

By:

Ansell, Martin P.

Publication type:

Article

Works matching IS 00222461 AND DT 2011 AND VI 46 AND IP 23

Simple morphology-controlled synthesis of hollow carbonaceous particles.

Amorphous phase formation in Al<sub>80</sub>Fe<sub>10</sub>M<sub>10</sub> (M = Ni, Ti, and V) ternary systems by mechanical alloying.

Imaging mechanism of carbon nanotubes on insulating and conductive substrates using a scanning electron microscope.

Splitting and broadening of the emission bands of Y<sub>2</sub>O<sub>3</sub>:Eu<sup>3+</sup>,Nd<sup>3+</sup> and its dependence on Nd<sup>3+</sup> concentration and annealing temperature.

Effect of salt composition on photovoltaic performance of the dye-sensitized solar cells prepared from nano anatase TiO<sub>2</sub> powder using NaCl-Na<sub>2</sub>HPO<sub>4</sub>·2H<sub>2</sub>O salt matrices.

Formation of semitransparent CuAlSe<sub>2</sub> thin films grown on transparent conducting oxide substrates by selenization.

Important aspects influencing stability of the electrochemical potential of conductive polymer-based electrodes.

Investigation of the effect of relative humidity on polymers by depth sensing indentation.

Local inhomogeneity and surface degradation of Fe<sub>1.15</sub>Te and Fe<sub>1.03</sub>Te<sub>0.62</sub>Se<sub>0.38</sub> single crystals.

Fatigue crack growth characteristics of a new Ni-Co-base superalloy TMW-4M3: effects of temperature and load ratio.

Magnetic properties of Fe<sub>78.4</sub>Si<sub>9.5</sub>B<sub>9</sub>Cu<sub>0.6</sub>Nb<sub>2.5</sub> nanocrystalline alloy powder cores.

Evaluation of the thixoformability of the A332 Alloy (Al-9.5 wt%Si-2.5 wt%Cu).

Influence of sputtering pressure on the structure and ionic conductivity of thin film amorphous electrolyte.

Tailoring coercivity and magnetic anisotropy of Co nanowire arrays by microstructure.

Effects of stretching processing parameters on the mean elongation ratio and maximum spread ratio of heavy forgings.

The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer.

Electrospinning preparation and photoluminescence properties of SrAl<sub>2</sub>O<sub>4</sub>:Ce<sup>3+</sup> nanowires.

Encapsulation of α-cyano-4-hydroxycinnamic acid into a NaY zeolite.

Evaluation of electrospun nanofiber formation of perfluorosulfonic acid and poly (N-vinylpyrrolidone) through solution rheology.

Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites.

Low-cost quasi-solid-state dye-sensitized solar cells based on a metal-free organic dye and a carbon aerogel counter electrode.

Soft-type polyurethane foams derived from molasses.

Adsorption and desorption of a gold-iodide complex onto cellulose acetate membrane coated with polyaniline or polypyrrole: a comparative study.

Divalent cation diffusion in calcium fluorapatite.

Thermal and dynamic mechanical properties of blends of bitumen with metallocene catalyzed polyolefins.

Synthesis, structure, and properties of the non-centrosymmetric borate Rb<sub>2</sub>CaB<sub>8</sub>O<sub>26</sub>H<sub>24</sub>.

Study of intrinsic white light emission and its components from ZnO-nanorods/p-polymer hybrid junctions grown on glass substrates.

Chromium influence on rhombohedral twinning in sapphire.

Characterization of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing.

X-ray photoelectron study on Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>x</sub>Fe<sub>1-x</sub>O<sub>3-δ</sub> (BSCF: x = 0.2 and 0.8) ceramics annealed at different temperature and pO<sub>2</sub>.

Modelling the effect of carbon on deformation behaviour of twinning induced plasticity steels.

Surface form memory by indentation and planarization of NiTi: displacements and mechanical energy density during constrained recovery.

Hydrogen peroxide versus water synthesis of bioglass--nanocrystalline hydroxyapatite composites.

Urea effect on the mechanism of mullite crystallization.

An experimental refinement of solid-solution relationship in Ca-α-Sialon ceramics by analytical electron microscopy.

Microstructure and properties of in situ nanostructured ceramic matrix composite coating prepared by plasma spraying.

Wood--a 45th anniversary review of JMS papers. Part 1: The wood cell wall and mechanical properties.