Works matching IS 00222461 AND DT 2010 AND VI 45 AND IP 5

Results: 38

Effect of welding heat input on microstructure and mechanical properties of simulated HAZ in Cu containing microalloyed steel.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1248, doi. 10.1007/s10853-009-4074-7

By:

Amer, Amer E.;
Koo, Min Y.;
Lee, Kyong H.;
Kim, Sang H.;
Hong, Soon H.

Publication type:

Article

The use of new technologies in coloration of textile fibers.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1143, doi. 10.1007/s10853-009-4111-6

By:

Ahmed, Nahed S. E.;
El-Shishtawy, Reda M.

Publication type:

Article

The effects of temperature on the molecular orientation of zinc phthalocyanine films.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1366, doi. 10.1007/s10853-009-4094-3

By:

Gaffo, Luciana;
Cordeiro, Márcia R.;
Freitas, Adonilson R.;
Moreira, Wania C.;
Girotto, Emerson M.;
Zucolotto, Valtencir

Publication type:

Article

Study of tensile deformation behaviour of M250 grade maraging steel using acoustic emission.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1371, doi. 10.1007/s10853-009-4095-2

By:

Mukhopadhyay, C. K.;
Rajkumar, K. V.;
Jayakumar, T.;
Raj, Baldev

Publication type:

Article

Development of pitch-based carbon–copper composites.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1393, doi. 10.1007/s10853-009-4097-0

By:

Kumar, Anil;
Kaur, Mandeep;
Kumar, Rajeev;
Sengupta, Pinaki Ranjan;
Raman, Vasantha;
Bhatia, Gopal;
Sood, Kedar Nath

Publication type:

Article

High strength bio-composite films of poly(vinyl alcohol) reinforced with chemically modified-fly ash.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1354, doi. 10.1007/s10853-009-4091-6

By:

Nath, Dilip Chandra Deb;
Bandyopadhyay, Sri;
Yu, Aibing;
Blackburn, Darryl;
White, Chris

Publication type:

Article

Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1336, doi. 10.1007/s10853-009-4087-2

By:

Ayrilmis, Nadir;
Buyuksari, Umit

Publication type:

Article

Isothermal crystallization kinetics of poly(vinylidene fluoride) in the α-phase in the scope of the Avrami equation.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1328, doi. 10.1007/s10853-009-4086-3

By:

Sencadas, V.;
Costa, C. M.;
Ribelles, J. L. Gómez;
Lanceros-Mendez, S.

Publication type:

Article

An etching characterization method for revealing the plastic deformation zone in a SUS303 stainless steel.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1220, doi. 10.1007/s10853-009-4068-5

By:

Okayasu, Mitsuhiro;
Sato, Kazuto;
Takasu, Satoshi

Publication type:

Article

In vitro degradation and drug release from polymer blends based on poly( dl-lactide), poly( l-lactide-glycolide) and poly(ε-caprolactone).

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1284, doi. 10.1007/s10853-009-4080-9

By:

McDonald, Paul F.;
Lyons, John G.;
Geever, Luke M.;
Higginbotham, Clement L.

Publication type:

Article

Structural and textural study of electrodeposited zinc from alkaline non-cyanide electrolyte.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1160, doi. 10.1007/s10853-009-4045-z

By:

Chandrasekar, M. S.;
Srinivasan, Shanmugasigamani;
Pushpavanam, Malathy

Publication type:

Article

Heterogeneous crystallization and composition dependence of optical parameters in Sn–Sb–Bi–Se chalcogenides.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1231, doi. 10.1007/s10853-009-4071-x

By:

Ahmad, Muneer;
Thangaraj, R.;
Sathiaraj, T. Stephen

Publication type:

Article

The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1193, doi. 10.1007/s10853-009-4064-9

By:

Hsieh, T. H.;
Kinloch, A. J.;
Masania, K.;
Lee, J. Sohn;
Taylor, A. C.;
Sprenger, S.

Publication type:

Article

Self-assembly of coordination polymers constructed from CuCN and unidentate pyridine bases.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1307, doi. 10.1007/s10853-009-4083-6

By:

Etaiw, Safaa El-din H.;
Amer, Said A.;
El-bendary, Mohamed M.

Publication type:

Article

Functional geraniol-Ca(OH)2 composite/sodium acetate alginate film on nonwoven polyethylene sheet: acetic acid gas production in response to acid.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1343, doi. 10.1007/s10853-009-4088-1

By:

Hideaki Ichiura;
Yoshitsugu Kaneda;
Yoshito Ohtani

Publication type:

Article

Electronic characterization and photocatalytic properties of TiO2/CdO electrospun nanofibers.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1272, doi. 10.1007/s10853-009-4078-3

By:

Kanjwal, Muzafar A.;
Barakat, Nasser A. M.;
Sheikh, Faheem A.;
Kim, Hak Yong

Publication type:

Article

Improved structural stability of titanium-doped β-Bi2O3 during visible-light-activated photocatalytic processes.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1385, doi. 10.1007/s10853-009-4096-1

By:

Yan Wang;
Yanyuan Wen;
Hanming Ding;
Yongkui Shan

Publication type:

Article

Structural and electrical conductivity studies on undoped and copper-doped nanocrystalline zinc sulphide.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1242, doi. 10.1007/s10853-009-4073-8

By:

Chellammal, S.;
Sankar, S.;
Selvakumar, S.;
Viswanathan, E.;
Murugaraj, R.;
Sivaji, K.

Publication type:

Article

Investigation on preparation of nano-size Gd0.2Ce0.8O2−δ material and its humidity sensing properties.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1361, doi. 10.1007/s10853-009-4092-5

By:

Yu Wen Hao;
Jing Wang;
Zhou Ye Chen

Publication type:

Article

Microstructural effects on the phase transitions and the thermal evolution of elastic and piezoelectric properties in highly dense, submicron-structured NaNbO3 ceramics.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1211, doi. 10.1007/s10853-009-4067-6

By:

Moure, A.;
Hungría, T.;
Castro, A.;
Pardo, L.

Publication type:

Article

Evidence for a threshold in the biosolubility of aluminosilicate vitreous fibers.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1154, doi. 10.1007/s10853-009-4036-0

By:

Devreux, François;
Cailleteau, Céline;
Barboux, Philippe

Publication type:

Article

A comparison of results obtained using different methods to assess the elastic properties of ceramic materials exemplified for Ba0.5Sr0.5Co0.8Fe0.2O3−δ.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1227, doi. 10.1007/s10853-009-4069-4

By:

Malzbender, J.;
Huang, B.;
Mönch, J.;
Steinbrech, R. W.

Publication type:

Article

Mesoporous titania–silica composite from sodium silicate and titanium oxychloride. Part II: one-pot co-condensation method.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1264, doi. 10.1007/s10853-009-4077-4

By:

Hilonga, Askwar;
Kim, Jong-Kil;
Sarawade, Pradip B.;
Kim, Hee Taik

Publication type:

Article

Mesoporous titania–silica composite from sodium silicate and titanium oxychloride. Part I: grafting method.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1255, doi. 10.1007/s10853-009-4076-5

By:

Hilonga, Askwar;
Kim, Jong-Kil;
Sarawade, Pradip B.;
Kim, Hee Taik

Publication type:

Article

Solvent control of cellulose acetate nanofibre felt structure produced by electrospinning.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1299, doi. 10.1007/s10853-009-4082-7

By:

Haas, Daniel;
Heinrich, Stefan;
Greil, Peter

Publication type:

Article

A novel method for preparation of organic resins reinforced geopolymer composites.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1189, doi. 10.1007/s10853-009-4063-x

By:

Yao Jun Zhang;
Sheng Li;
De Long Xu;
Bao Qiang Wang;
Guo Ming Xu;
Dong Feng Yang;
Nan Wang;
Hou Cun Liu;
Ya Chao Wang

Publication type:

Article

Tailoring the tensile/compressive response of magnesium alloy ZK60A using Al2O3 nanoparticles.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1170, doi. 10.1007/s10853-009-4059-6

By:

Jayaramanavar, P.;
Paramsothy, M.;
Balaji, A.;
Gupta, M.

Publication type:

Article

Effects of short aging on thickening anisotropy of θ′ precipitate and mechanical properties of severe cold-rolled 2519A aluminum alloy plate.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1401, doi. 10.1007/s10853-009-4070-y

By:

Xin-ming Zhang;
Zhi-guo Gao;
Yi-sheng Zhao

Publication type:

Article

Dry rolling and sliding friction and wear of organophilic layered silicate/hydrogenated nitrile rubber nanocomposite.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1293, doi. 10.1007/s10853-009-4081-8

By:

Xu, Dan;
Karger-Kocsis, József

Publication type:

Article

1,3,4-Oxadiazole epoxy resin-based liquid crystalline thermosets and their cure kinetics.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1321, doi. 10.1007/s10853-009-4085-4

By:

Balamurugan, R.;
Kannan, P.

Publication type:

Article

Mechanical studies on poly(vinyl chloride)–poly(methyl methacrylate)-based polymer electrolytes.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1280, doi. 10.1007/s10853-009-4079-2

By:

Ramesh, S.;
Winie, Tan;
Arof, A. K.

Publication type:

Article

The room temperature photoluminescence properties of Eu3+-doped bi-phase calcium phosphate under visible light.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1237, doi. 10.1007/s10853-009-4072-9

By:

Han Wang;
Jun Yu;
Jianqiu Li;
Xiaokun Cheng;
Zhiliang Huang

Publication type:

Article

Properties of polymer networks prepared by blending polyester urethane acrylate with acrylated epoxidized soybean oil.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1315, doi. 10.1007/s10853-009-4084-5

By:

Oprea, S.

Publication type:

Article

Microstructures formed during devitrification of Na2O·Al2O3·B2O3·SiO2·Fe2O3 glasses.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1350, doi. 10.1007/s10853-009-4090-7

By:

Harizanova, Ruzha;
Vølksch, Günter;
Rüssel, Christian

Publication type:

Article

Ultra-long SiO2 and SiO2/TiO2 tubes embedded with Pt nanoparticles using magnus green salt as templating structures.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1179, doi. 10.1007/s10853-009-4062-y

By:

Aresipathi, Catherine;
Feldhoff, Armin;
Wark, Michael

Publication type:

Article

A preliminary study of calcium containing plasma electrolytic oxidation coatings on AM50 magnesium alloy.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1406, doi. 10.1007/s10853-009-4093-4

By:

Srinivasan, P. Bala;
Liang, J.;
Blawert, C.;
Störmer, M.;
Dietzel, W.

Publication type:

Article

A non-destructive method for thickness measurement of thin electrospun membranes using white light profilometry.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1411, doi. 10.1007/s10853-009-4103-6

By:

Affandi, Nor Dalila Nor;
Truong, Yen Bach;
Kyratzis, Ilias Louis;
Padhye, Rajiv;
Arnold, Lyndon

Publication type:

Article

Controlled synthesis of MnFe2O4–Ni core–shell nanoparticles.

Published in:

Journal of Materials Science, 2010, v. 45, n. 5, p. 1419, doi. 10.1007/s10853-009-4110-7

By:

Yang, Su-Chul;
Ahn, Cheol-Woo;
Park, Chee-Sung;
Yang, Yaodong;
Viehland, Dwight;
Priya, Shashank

Publication type:

Article

Works matching IS 00222461 AND DT 2010 AND VI 45 AND IP 5

Effect of welding heat input on microstructure and mechanical properties of simulated HAZ in Cu containing microalloyed steel.

The use of new technologies in coloration of textile fibers.

The effects of temperature on the molecular orientation of zinc phthalocyanine films.

Study of tensile deformation behaviour of M250 grade maraging steel using acoustic emission.

Development of pitch-based carbon–copper composites.

High strength bio-composite films of poly(vinyl alcohol) reinforced with chemically modified-fly ash.

Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite.

Isothermal crystallization kinetics of poly(vinylidene fluoride) in the α-phase in the scope of the Avrami equation.

An etching characterization method for revealing the plastic deformation zone in a SUS303 stainless steel.

In vitro degradation and drug release from polymer blends based on poly( dl-lactide), poly( l-lactide-glycolide) and poly(ε-caprolactone).

Structural and textural study of electrodeposited zinc from alkaline non-cyanide electrolyte.

Heterogeneous crystallization and composition dependence of optical parameters in Sn–Sb–Bi–Se chalcogenides.

The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles.

Self-assembly of coordination polymers constructed from CuCN and unidentate pyridine bases.

Functional geraniol-Ca(OH)<sub>2</sub> composite/sodium acetate alginate film on nonwoven polyethylene sheet: acetic acid gas production in response to acid.

Electronic characterization and photocatalytic properties of TiO<sub>2</sub>/CdO electrospun nanofibers.

Improved structural stability of titanium-doped β-Bi<sub>2</sub>O<sub>3</sub> during visible-light-activated photocatalytic processes.

Structural and electrical conductivity studies on undoped and copper-doped nanocrystalline zinc sulphide.

Investigation on preparation of nano-size Gd<sub>0.2</sub>Ce<sub>0.8</sub>O<sub>2−δ</sub> material and its humidity sensing properties.

Microstructural effects on the phase transitions and the thermal evolution of elastic and piezoelectric properties in highly dense, submicron-structured NaNbO<sub>3</sub> ceramics.

Evidence for a threshold in the biosolubility of aluminosilicate vitreous fibers.

A comparison of results obtained using different methods to assess the elastic properties of ceramic materials exemplified for Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3−δ</sub>.

Mesoporous titania–silica composite from sodium silicate and titanium oxychloride. Part II: one-pot co-condensation method.

Mesoporous titania–silica composite from sodium silicate and titanium oxychloride. Part I: grafting method.

Solvent control of cellulose acetate nanofibre felt structure produced by electrospinning.

A novel method for preparation of organic resins reinforced geopolymer composites.

Tailoring the tensile/compressive response of magnesium alloy ZK60A using Al<sub>2</sub>O<sub>3</sub> nanoparticles.

Effects of short aging on thickening anisotropy of θ′ precipitate and mechanical properties of severe cold-rolled 2519A aluminum alloy plate.

Dry rolling and sliding friction and wear of organophilic layered silicate/hydrogenated nitrile rubber nanocomposite.

1,3,4-Oxadiazole epoxy resin-based liquid crystalline thermosets and their cure kinetics.

Mechanical studies on poly(vinyl chloride)–poly(methyl methacrylate)-based polymer electrolytes.

The room temperature photoluminescence properties of Eu<sup>3+</sup>-doped bi-phase calcium phosphate under visible light.

Properties of polymer networks prepared by blending polyester urethane acrylate with acrylated epoxidized soybean oil.

Microstructures formed during devitrification of Na<sub>2</sub>O·Al<sub>2</sub>O<sub>3</sub>·B<sub>2</sub>O<sub>3</sub>·SiO<sub>2</sub>·Fe<sub>2</sub>O<sub>3</sub> glasses.

Ultra-long SiO<sub>2</sub> and SiO<sub>2</sub>/TiO<sub>2</sub> tubes embedded with Pt nanoparticles using magnus green salt as templating structures.

A preliminary study of calcium containing plasma electrolytic oxidation coatings on AM50 magnesium alloy.

A non-destructive method for thickness measurement of thin electrospun membranes using white light profilometry.

Controlled synthesis of MnFe<sub>2</sub>O<sub>4</sub>–Ni core–shell nanoparticles.