Works matching IS 00222461 AND DT 2010 AND VI 45 AND IP 14

Results: 36

The effect of temperature on fatigue damage of FRP composites.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3757, doi. 10.1007/s10853-010-4425-4

By:

Mivehchi, H.;
Varvani-Farahani, A.

Publication type:

Article

Elastic, electronic, and vibrational properties of RhN compound.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3720, doi. 10.1007/s10853-010-4415-6

By:

Deligoz, E.;
Colakoglu, K.;
Ciftci, Y. O.

Publication type:

Article

Synthesis and sintering of nano-sized BaSnO3 powders containing BaGeO3.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3784, doi. 10.1007/s10853-010-4432-5

By:

Köferstein, Roberto;
Jäger, Lothar;
Zenkner, Mandy;
García-García, Francisco Javier;
Ebbinghaus, Stefan G.

Publication type:

Article

Aspect ratio-dependent optical properties of Ni–P/AAO nano-array composite structure.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3735, doi. 10.1007/s10853-010-4422-7

By:

Feng-Hua Wang;
Ya-Fang Tu;
Jian-Ping Sang;
Sheng-You Huang;
Xian-Wu Zou

Publication type:

Article

Electrochemical properties of Co(OH)2 powders as an anode in an alkaline battery.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3752, doi. 10.1007/s10853-010-4424-5

By:

Yan Yao;
Xiangyu Zhao;
Liqun Ma;
Tienan Qin;
Meng Yang;
Yi Ding

Publication type:

Article

Evolution of structure and performance of Cu-based layered double hydroxides.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3741, doi. 10.1007/s10853-010-4423-6

By:

Zhang, L. H.;
Li, F.;
Evans, D. G.;
Duan, X.

Publication type:

Article

Effect of water content on the piezoresistivity of MWNT/cement composites.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3714, doi. 10.1007/s10853-010-4414-7

By:

Baoguo Han;
Xun Yu;
Jinping Ou

Publication type:

Article

Crystallization in glass: elucidating a realm of diversity by transmission electron microscopy.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3683, doi. 10.1007/s10853-010-4541-1

By:

Höche, Thomas

Publication type:

Article

Effect of elemental diffusion on temperature coefficient of piezoelectric properties in KNN-based lead-free composites.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3961, doi. 10.1007/s10853-010-4550-0

By:

Cheol-Woo Ahn;
Chee-Sung Park;
Dittmer, Robert;
Soon-Hyung Hong;
Priya, Shashank

Publication type:

Article

Thermomechanical experiment and analysis on shape recovery properties of shape memory polymer influenced by fiber reinforcement.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3957, doi. 10.1007/s10853-010-4545-x

By:

Nishikawa, M.;
Wakatsuki, K.;
Takeda, N.

Publication type:

Article

Interfacial adhesion improvement of plain woven carbon fiber reinforced epoxy filled with micro-fibrillated cellulose by addition liquid rubber.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3841, doi. 10.1007/s10853-010-4439-y

By:

Gabr, Mohamed H.;
Abd Elrahman, Mostafa;
Okubo, Kazuya;
Fujii, Toru

Publication type:

Article

Physiochemical characterizations of electrospun (ZnO–GeO2) nanofibers and their optical properties.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3833, doi. 10.1007/s10853-010-4438-z

By:

Kanjwal, Muzafar A.;
Barakat, Nasser A. M.;
Sheikh, Faheem A.;
Dae Kwang Park;
Hak Yong Kim

Publication type:

Article

Field emission properties of one-dimensional single CuO nanoneedle by in situ microscopy.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3791, doi. 10.1007/s10853-010-4433-4

By:

Yueli Liu;
Lei Zhong;
Zhuoyin Peng;
Yanbao Song;
Wen Chen

Publication type:

Article

Influence of ductile interlayers on mechanical behaviour of hard coatings under depth-sensing indentation: a numerical study on TiAlN.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3812, doi. 10.1007/s10853-010-4436-1

By:

Sakharova, N. A.;
Fernandes, J. V.;
Oliveira, M. C.;
Antunes, J. M.

Publication type:

Article

Synthesis and photoelectric property of poly(3-octylthiophene)/ferric oxide complexes.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3866, doi. 10.1007/s10853-010-4442-3

By:

Zhiyue Han;
Jingchang Zhang;
Xiuying Yang;
Hong Zhu;
Weiliang Cao

Publication type:

Article

Structure and photoluminescence properties of ZnS nanowires sheathed with SnO2 by atomic layer deposition.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3851, doi. 10.1007/s10853-010-4440-5

By:

Kyungjoon Baek;
Changhyun Jin;
Jungkeun Lee;
Bong-Yong Jeong;
Wan In Lee;
Chongmu Lee

Publication type:

Article

Effect of pH value on the synthesis and characterization of Ba0.5Sr0.5Co0.8Fe0.2O3−δ powders prepared by the citrate–EDTA complexing method.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3824, doi. 10.1007/s10853-010-4437-0

By:

I.-Ming Hung;
Chen-Yu Liang;
Chun-Jing Ciou;
Ren-Zheng Song;
Zu-Yu Lai

Publication type:

Article

Ultrasonic evaluation of polyether ether ketone and carbon fiber-reinforced PEEK.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3768, doi. 10.1007/s10853-010-4428-1

By:

Fitch, David A.;
Hoffmeister, Brent K.;
De Ana, Javier

Publication type:

Article

Effect of Zn content on the microstructures and mechanical properties of laser beam-welded ZK series magnesium alloys.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3797, doi. 10.1007/s10853-010-4434-3

By:

Yu, Z. H.;
Yan, H. G.;
Chen, J. H.;
Wu, Y. Z.

Publication type:

Article

An alternative approach of solid-state reaction to prepare nanocrystalline KNbO3.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3778, doi. 10.1007/s10853-010-4431-6

By:

Tingting Su;
Heng Jiang;
Hong Gong;
Yuchun Zhai

Publication type:

Article

Stability predictions of solid Li-ion conducting membranes in aqueous solutions.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3954, doi. 10.1007/s10853-010-4522-4

By:

Wolfenstine, J.

Publication type:

Article

Regression analysis of manufacturing electrospun nonwoven nanotextiles.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3938, doi. 10.1007/s10853-010-4459-7

By:

Patra, S. N.;
Lin, R. J. T.;
Bhattacharyya, D.

Publication type:

Article

Effect of ultrasound radiation on the size and size distribution of synthesized copper particles.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3804, doi. 10.1007/s10853-010-4435-2

By:

Moghimi-Rad, Jafar;
Zabihi, Fatemeh;
Hadi, Iraj;
Ebrahimi, Sadollah;
Isfahani, Taghi Dallali;
Sabbaghzadeh, Jamshid

Publication type:

Article

Machining damage analysis of alumina in relation to thermal shock behavior.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3901, doi. 10.1007/s10853-010-4450-3

By:

Cavalieri, Ana L.;
Míngolo, Norma;
Martinez, Analía G. Tomba

Publication type:

Article

Comparative study on characteristics of hybrid laser-TIG welded AZ61/Q235 lap joints with and without interlayers.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3912, doi. 10.1007/s10853-010-4451-2

By:

Xiao-dong Qi;
Li-ming Liu

Publication type:

Article

Structural and electrochemical performance of three-dimensional LiMn2O4 thin film.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3947, doi. 10.1007/s10853-010-4460-1

By:

Bo Gun Park;
Soohyun Kim;
Il-Doo Kim;
Yong Joon Park

Publication type:

Article

Controlled growth of TiO2 nanorods capped with carboxylate groups by the solvothermal process.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3895, doi. 10.1007/s10853-010-4448-x

By:

Eun Yi Kim;
Hyorim Choi;
Chin Myung Whang

Publication type:

Article

Relation between microstructure and Charpy impact properties of an elemental and pre-alloyed 14Cr ODS ferritic steel powder after hot isostatic pressing.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3921, doi. 10.1007/s10853-010-4457-9

By:

Oksiuta, Z.;
Boehm-Courjault, E.;
Baluc, N.

Publication type:

Article

Microstructures and high temperature oxidation resistance of alloys from Nb–Cr–Si system.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3931, doi. 10.1007/s10853-010-4458-8

By:

Varma, S. K.;
Parga, Clemente;
Amato, Krista;
Hernandez, Jennifer

Publication type:

Article

Particle cavitation in rubber toughened epoxies: the role of particle size.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3882, doi. 10.1007/s10853-010-4447-y

By:

Guild, F. J.;
Kinloch, A. J.;
Taylor, A. C.

Publication type:

Article

Synthesis, characterisation and thermal behaviour of lithium aluminosilicate inorganic polymers.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3707, doi. 10.1007/s10853-010-4383-x

By:

O'Connor, Sean J.;
MacKenzie, Kenneth J. D.

Publication type:

Article

Characterisation of hollow Russian doll microspheres.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3697, doi. 10.1007/s10853-010-4479-3

By:

Begum, Shakiela;
Jones, Ian P.;
Chengge Jiao;
Lynch, Daniel E.;
Preece, Jon A.

Publication type:

Article

Development of layered porous poly( l-lactide) for bone regeneration.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3966, doi. 10.1007/s10853-010-4564-7

By:

Joo-Eon Park;
Todo, Mitsugu

Publication type:

Article

Microplasticity phenomena in thermomechanically strained nickel thin films.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3874, doi. 10.1007/s10853-010-4445-0

By:

Taylor, A. A.;
Oh, S. H.;
Dehm, G.

Publication type:

Article

Poly(anthranilic acid)/multi-walled carbon nanotube composites: spectral, morphological, and electrical properties.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3858, doi. 10.1007/s10853-010-4441-4

By:

Dash, Matru Prasad;
Tripathy, Minaketan;
Sasmal, Abhisek;
Mohanty, Gourang C.;
Nayak, P. L.

Publication type:

Article

Microstructure and mechanical properties of Al-base composites by addition of Al–Ni–Co decagonal quasicrystalline particles through a mechanical stirring route.

Published in:

Journal of Materials Science, 2010, v. 45, n. 14, p. 3727, doi. 10.1007/s10853-010-4421-8

By:

Man Zhu;
Gencang Yang;
Lijuan Yao;
Suling Cheng;
Yaohe Zhou

Publication type:

Article

Works matching IS 00222461 AND DT 2010 AND VI 45 AND IP 14

The effect of temperature on fatigue damage of FRP composites.

Elastic, electronic, and vibrational properties of RhN compound.

Synthesis and sintering of nano-sized BaSnO<sub>3</sub> powders containing BaGeO<sub>3</sub>.

Aspect ratio-dependent optical properties of Ni–P/AAO nano-array composite structure.

Electrochemical properties of Co(OH)<sub>2</sub> powders as an anode in an alkaline battery.

Evolution of structure and performance of Cu-based layered double hydroxides.

Effect of water content on the piezoresistivity of MWNT/cement composites.

Crystallization in glass: elucidating a realm of diversity by transmission electron microscopy.

Effect of elemental diffusion on temperature coefficient of piezoelectric properties in KNN-based lead-free composites.

Thermomechanical experiment and analysis on shape recovery properties of shape memory polymer influenced by fiber reinforcement.

Interfacial adhesion improvement of plain woven carbon fiber reinforced epoxy filled with micro-fibrillated cellulose by addition liquid rubber.

Physiochemical characterizations of electrospun (ZnO–GeO<sub>2</sub>) nanofibers and their optical properties.

Field emission properties of one-dimensional single CuO nanoneedle by in situ microscopy.

Influence of ductile interlayers on mechanical behaviour of hard coatings under depth-sensing indentation: a numerical study on TiAlN.

Synthesis and photoelectric property of poly(3-octylthiophene)/ferric oxide complexes.

Structure and photoluminescence properties of ZnS nanowires sheathed with SnO<sub>2</sub> by atomic layer deposition.

Effect of pH value on the synthesis and characterization of Ba<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3−δ</sub> powders prepared by the citrate–EDTA complexing method.

Ultrasonic evaluation of polyether ether ketone and carbon fiber-reinforced PEEK.

Effect of Zn content on the microstructures and mechanical properties of laser beam-welded ZK series magnesium alloys.

An alternative approach of solid-state reaction to prepare nanocrystalline KNbO<sub>3</sub>.

Stability predictions of solid Li-ion conducting membranes in aqueous solutions.

Regression analysis of manufacturing electrospun nonwoven nanotextiles.

Effect of ultrasound radiation on the size and size distribution of synthesized copper particles.

Machining damage analysis of alumina in relation to thermal shock behavior.

Comparative study on characteristics of hybrid laser-TIG welded AZ61/Q235 lap joints with and without interlayers.

Structural and electrochemical performance of three-dimensional LiMn<sub>2</sub>O<sub>4</sub> thin film.

Controlled growth of TiO<sub>2</sub> nanorods capped with carboxylate groups by the solvothermal process.

Relation between microstructure and Charpy impact properties of an elemental and pre-alloyed 14Cr ODS ferritic steel powder after hot isostatic pressing.

Microstructures and high temperature oxidation resistance of alloys from Nb–Cr–Si system.

Particle cavitation in rubber toughened epoxies: the role of particle size.

Synthesis, characterisation and thermal behaviour of lithium aluminosilicate inorganic polymers.

Characterisation of hollow Russian doll microspheres.

Development of layered porous poly( l-lactide) for bone regeneration.

Microplasticity phenomena in thermomechanically strained nickel thin films.

Poly(anthranilic acid)/multi-walled carbon nanotube composites: spectral, morphological, and electrical properties.

Microstructure and mechanical properties of Al-base composites by addition of Al–Ni–Co decagonal quasicrystalline particles through a mechanical stirring route.