Works matching IS 00222461 AND DT 2009 AND VI 44 AND IP 20

Results: 33

Mold-filling characteristics and solidification behavior of magnesium alloy in vacuum suction casting process.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5644, doi. 10.1007/s10853-009-3795-y

By:

Haitao Teng;
Tingju Li;
Xiaoli Zhang;
Fudong Bai;
Kai Qi

Publication type:

Article

Study on the structure of SF fiber mats electrospun with HFIP and FA and cells behavior.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5682, doi. 10.1007/s10853-009-3800-5

By:

Feng Zhang;
Zuo, Bao Q.;
Lun Bai

Publication type:

Article

Precipitation hardening of Zr-modified Mg–Ca–Zn alloy.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5627, doi. 10.1007/s10853-009-3793-0

By:

Shepelev, D.;
Bamberger, M.;
Katsman, A.

Publication type:

Article

Preparation of polycrystalline bulk Mg2Si by using NaSi.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5688, doi. 10.1007/s10853-009-3773-4

By:

Yamada, Takahiro;
Oishi, Yusuke;
Morito, Haruhiko;
Yamane, Hisanori

Publication type:

Article

Effect of fibre concentration, temperature and mould thickness on weldline integrity of short glass-fibre-reinforced polypropylene copolymer composites.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5588, doi. 10.1007/s10853-009-3786-z

By:

Hashemi, S.;
Onishi, P.

Publication type:

Article

Mechanical characterization of anti-infectious, anti-allergic, and bioactive coatings on orthopedic implant surfaces.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5544, doi. 10.1007/s10853-009-3776-1

By:

Fritsche, Andreas;
Haenle, Maximilian;
Zietz, Carmen;
Mittelmeier, Wolfram;
Neumann, Hans-Georg;
Heidenau, Frank;
Finke, Birgit;
Bader, Rainer

Publication type:

Article

Electrical characterization of LiTaO3:P(VDF–TrFE) composites.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5469, doi. 10.1007/s10853-009-3753-8

By:

Guggilla, Padmaja;
Batra, A. K.;
Edwards, M. E.

Publication type:

Article

The effect of heat treatment on mechanical properties of carbon nanofiber reinforced copper matrix composites.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5602, doi. 10.1007/s10853-009-3789-9

By:

Jianli Kang;
Nash, Philip;
Jiajun Li;
Chunsheng Shi;
Naiqin Zhao;
Sijie Gu

Publication type:

Article

Electromigration behaviors in Sb particle-reinforced composite eutectic SnAgCu solder joints.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5595, doi. 10.1007/s10853-009-3787-y

By:

Fu Guo;
Guangchen Xu;
Hongwen He

Publication type:

Article

SIMS analysis of low content hydrogen in commercially pure titanium.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5692, doi. 10.1007/s10853-009-3783-2

By:

Hamada, Shigeru;
Ohnishi, Katsu;
Nishikawa, Hide-aki;
Oda, Yasuji;
Noguchi, Hiroshi

Publication type:

Article

Structural study of Li2MnO3 by electron microscopy.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5579, doi. 10.1007/s10853-009-3784-1

By:

Lei, C. H.;
Wen, J. G.;
Sardela, M.;
Bareño, J.;
Petrov, I.;
Kang, S.-H.;
Abraham, D. P.

Publication type:

Article

Interfacial study of Crofer 22 APU interconnect-SABS-0 seal glass for solid oxide fuel/electrolyzer cells.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5569, doi. 10.1007/s10853-009-3781-4

By:

Mahapatra, M. K.;
Lu, K.

Publication type:

Article

Diameter variability and strength scatter of elementary flax fibers.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5697, doi. 10.1007/s10853-009-3785-0

By:

Spārniņš, E.;
Andersons, J.

Publication type:

Article

On the essential work of fracture in polymer–metal multilayers.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5537, doi. 10.1007/s10853-009-3775-2

By:

Garnier, Géraldine;
Chehab, Béchir;
Yrieix, Bernard;
Bréchet, Yves;
Flandin, Lionel

Publication type:

Article

Preparation and characterization of composite materials obtained by pressure infiltration of aluminum in sintered SiC/kaolin preforms.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5662, doi. 10.1007/s10853-009-3798-8

By:

Freitas, N.;
Pianaro, S. A.;
Tebcherani, S. M.;
Nadal, F. N.;
T. Berg, E. A.

Publication type:

Article

Pressure effects on elastic and thermodynamic properties of ZrB2.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5618, doi. 10.1007/s10853-009-3791-2

By:

Hongzhi Fu;
Ying Lu;
Wenfang Liu;
Tao Gao

Publication type:

Article

Oxidation resistance of hafnium diboride—silicon carbide from 1400 to 2000 °C.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5673, doi. 10.1007/s10853-009-3799-7

By:

Carney, Carmen M.

Publication type:

Article

Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5654, doi. 10.1007/s10853-009-3796-x

By:

Almajid, Abdulhakim A.;
El-Danaf, Ehab A.;
Soliman, Mahmoud S.

Publication type:

Article

Electron spin resonance study of Mo(V) ion species incorporated into aluminosilicate nanospheres with solid core/mesoporous shell structure.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5636, doi. 10.1007/s10853-009-3794-z

By:

Back, Gernho;
Hyeyoung Lee;
Minsik Kim;
Jong-Sung Yu;
Soobok Jeong;
Young Bae Chae

Publication type:

Article

Powder metallurgical fabrication of zirconium matrix cermet nuclear fuels.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5494, doi. 10.1007/s10853-009-3767-2

By:

Totemeier, Aaron R.;
McDeavitt, Sean M.

Publication type:

Article

A combined synchrotron powder diffraction and vibrational study of the thermal treatment of palygorskite–indigo to produce Maya blue.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5524, doi. 10.1007/s10853-009-3772-5

By:

del Río, Manuel Sánchez;
Boccaleri, Enrico;
Milanesio, Marco;
Croce, Gianluca;
van Beek, Wouter;
Tsiantos, Constantinos;
Chyssikos, Georgios D.;
Gionis, Vassilis;
Kacandes, George H.;
Suárez, Mercedes;
García-Romero, Emilia

Publication type:

Article

Magnetoelectric and electrical properties of WO3-doped (Ni0.8Zn0.1Cu0.1)Fe2O4/[Pb(Ni1/3Nb2/3)O3–Pb(Zn1/3Nb2/3)O3–PbTiO3] composites

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5515, doi. 10.1007/s10853-009-3771-6

By:

Renbing Sun;
Bijun Fang;
Xinwei Dong;
Junming Liu

Publication type:

Article

Thermal properties and microstructure of bulk nanocrystalline Gd material.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5509, doi. 10.1007/s10853-009-3769-0

By:

Hong Zeng;
Chunjiang Kuang;
Jiuxing Zhang;
Ming Yue

Publication type:

Article

Effect of hot compression and annealing on microstructure evolution of ZK60 magnesium alloys.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5475, doi. 10.1007/s10853-009-3762-7

By:

Shouren Wang;
Suk Bong Kang;
JaeHyung Cho

Publication type:

Article

Kinetic study of controlled release of VPA and DPH antiepileptic drugs using biocompatible nanostructured sol–gel TiO2.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5459, doi. 10.1007/s10853-009-3745-8

By:

López, T.;
Alexander-Katz, R.;
Castillo, P.;
González, M.;
Manjarrez, J.;
Gonzalez, R. D.;
Ilharco, L.;
Fidalgo, A.;
Rieumont, J.

Publication type:

Article

Synthesis and characterization of BaTiO3-based X9R ceramics.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5563, doi. 10.1007/s10853-009-3779-y

By:

Ling-xia Li;
Ye-mei Han, 1;
Ping Zhang;
Cui Ming;
Xue Wei

Publication type:

Article

Compression properties of cellular AlCu5Mn alloy foams with wide range of porosity.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5552, doi. 10.1007/s10853-009-3777-0

By:

Dong-Hui Yang;
Shang-Run Yang;
Ai-Bin Ma;
Jin-Hua Jiang

Publication type:

Article

Electrical conductivity, relaxation, and scaling analysis studies of lithium alumino phosphate glasses and glass ceramics.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5557, doi. 10.1007/s10853-009-3778-z

By:

V. D. Sharma, M. V. N.;
Sarma, A. V.;
Rao, R. Balaji

Publication type:

Article

The fabrication of a MWNTs–polymer composite chemoresistive sensor array to discriminate between chemical toxic agents.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5485, doi. 10.1007/s10853-009-3766-3

By:

Chang-Pin Chang;
Chun-Lung Yuan

Publication type:

Article

Three-jet electrospinning using a flat spinneret.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5501, doi. 10.1007/s10853-009-3768-1

By:

Feng-Lei Zhou;
Rong-Hua Gong;
Porat, Isaac

Publication type:

Article

Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5609, doi. 10.1007/s10853-009-3790-3

By:

Buchwald, Anja;
Tatarin, R.;
Stephan, D.

Publication type:

Article

Effect of abnormal grain growth on tensile strength of Al–Cu–Mg alloy friction stir welded joints.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5452, doi. 10.1007/s10853-009-3735-x

By:

Safarkhanian, M. A.;
Goodarzi, M.;
A. Boutorabi, S. M.

Publication type:

Article

Negative thermal expansion: a review.

Published in:

Journal of Materials Science, 2009, v. 44, n. 20, p. 5441, doi. 10.1007/s10853-009-3692-4

By:

Miller, W.;
Smith, C. W.;
Mackenzie, D. S.;
Evans, K. E.

Publication type:

Article

Works matching IS 00222461 AND DT 2009 AND VI 44 AND IP 20

Mold-filling characteristics and solidification behavior of magnesium alloy in vacuum suction casting process.

Study on the structure of SF fiber mats electrospun with HFIP and FA and cells behavior.

Precipitation hardening of Zr-modified Mg–Ca–Zn alloy.

Preparation of polycrystalline bulk Mg<sub>2</sub>Si by using NaSi.

Effect of fibre concentration, temperature and mould thickness on weldline integrity of short glass-fibre-reinforced polypropylene copolymer composites.

Mechanical characterization of anti-infectious, anti-allergic, and bioactive coatings on orthopedic implant surfaces.

Electrical characterization of LiTaO<sub>3</sub>:P(VDF–TrFE) composites.

The effect of heat treatment on mechanical properties of carbon nanofiber reinforced copper matrix composites.

Electromigration behaviors in Sb particle-reinforced composite eutectic SnAgCu solder joints.

SIMS analysis of low content hydrogen in commercially pure titanium.

Structural study of Li<sub>2</sub>MnO<sub>3</sub> by electron microscopy.

Interfacial study of Crofer 22 APU interconnect-SABS-0 seal glass for solid oxide fuel/electrolyzer cells.

Diameter variability and strength scatter of elementary flax fibers.

On the essential work of fracture in polymer–metal multilayers.

Preparation and characterization of composite materials obtained by pressure infiltration of aluminum in sintered SiC/kaolin preforms.

Pressure effects on elastic and thermodynamic properties of ZrB<sub>2</sub>.

Oxidation resistance of hafnium diboride—silicon carbide from 1400 to 2000 °C.

Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy.

Electron spin resonance study of Mo(V) ion species incorporated into aluminosilicate nanospheres with solid core/mesoporous shell structure.

Powder metallurgical fabrication of zirconium matrix cermet nuclear fuels.

A combined synchrotron powder diffraction and vibrational study of the thermal treatment of palygorskite–indigo to produce Maya blue.

Magnetoelectric and electrical properties of WO<sub>3</sub>-doped (Ni<sub>0.8</sub>Zn<sub>0.1</sub>Cu<sub>0.1</sub>)Fe<sub>2</sub>O<sub>4</sub>/[Pb(Ni<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>–Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>–PbTiO<sub>3</sub>] composites

Thermal properties and microstructure of bulk nanocrystalline Gd material.

Effect of hot compression and annealing on microstructure evolution of ZK60 magnesium alloys.

Kinetic study of controlled release of VPA and DPH antiepileptic drugs using biocompatible nanostructured sol–gel TiO<sub>2</sub>.

Synthesis and characterization of BaTiO<sub>3</sub>-based X9R ceramics.

Compression properties of cellular AlCu5Mn alloy foams with wide range of porosity.

Electrical conductivity, relaxation, and scaling analysis studies of lithium alumino phosphate glasses and glass ceramics.

The fabrication of a MWNTs–polymer composite chemoresistive sensor array to discriminate between chemical toxic agents.

Three-jet electrospinning using a flat spinneret.

Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends.

Effect of abnormal grain growth on tensile strength of Al–Cu–Mg alloy friction stir welded joints.

Negative thermal expansion: a review.