Works matching IS 00222461 AND DT 2009 AND VI 44 AND IP 11

Results: 38

Relation between structure and mechanical properties (elastoplastic and fracture behavior) of hybrid organic–inorganic coating.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2752, doi. 10.1007/s10853-009-3359-1

By:

Ferchichi, A.;
Calas-Etienne, S.;
Smaïhi, M.;
Prévot, G.;
Solignac, P.;
Etienne, P.

Publication type:

Article

Synthesis, characterization, and photochromic behaviors of polythiophene derivatives in the solid state.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2765, doi. 10.1007/s10853-009-3361-7

By:

Zhang, Bing-zhu;
Zhao, Xiong-yan

Publication type:

Article

Influence of polyvinylpyrrolidone on properties of flexible electrically conducting indium tin oxide nanoparticle coatings.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2736, doi. 10.1007/s10853-009-3357-3

By:

Königer, Tobias;
Münstedt, Helmut

Publication type:

Article

Single step synthesis of nanosized CeO2–M xO y mixed oxides (M xO y = SiO2, TiO2, ZrO2, and Al2O3) by microwave induced solution combustion synthesis: characterization and CO oxidation

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2743, doi. 10.1007/s10853-009-3358-2

By:

Reddy, Benjaram;
Reddy, Gunugunuri;
Ganesh, Ibram;
Ferreira, Jose

Publication type:

Article

Facile fabrication of silver/polypyrrole composites by the modified silver mirror reaction.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 3002, doi. 10.1007/s10853-009-3416-9

By:

Wang, Wenqin;
Shi, Gaoquan;
Zhang, Ruifeng

Publication type:

Article

The interfacial characteristic of SiCp/AZ91 magnesium matrix composites fabricated by stir casting.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2759, doi. 10.1007/s10853-009-3360-8

By:

Wang, X.;
Hu, X.;
Wu, K.;
Zheng, M.;
Zheng, L.;
Zhai, Q.

Publication type:

Article

Investigation of the thermal and structural properties of single-molecule magnet/polymer nanocomposite films.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2805, doi. 10.1007/s10853-009-3369-z

By:

Johnson, Lucas;
Matisons, Janis

Publication type:

Article

Capacitive characteristics of Ni–Co oxide nano-composite via coordination homogeneous co-precipitation method.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2828, doi. 10.1007/s10853-009-3373-3

By:

Deng, Jing-Jing;
Deng, Jian-Cheng;
Liu, Zi-Ling;
Deng, Hui-Ren;
Liu, Bo

Publication type:

Article

Stress-dependent piezoresistivity of tunneling-percolation systems.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2814, doi. 10.1007/s10853-009-3371-5

By:

Wang, Yansong;
Zhang, Ligong;
Fan, Yi;
Jiang, Dapeng;
An, Linan

Publication type:

Article

Correlation among sintering process, porosity, and creep deformation of refractory concrete.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2844, doi. 10.1007/s10853-009-3376-0

By:

Terzić, Anja;
Pavlović, Ljubica

Publication type:

Article

Electrochemical polymerizatıon of hexachloroethane to form poly(hydridocarbyne): a pre-ceramic polymer for diamond production.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2774, doi. 10.1007/s10853-009-3364-4

By:

Nur, Yusuf;
Cengiz, Halime;
Pitcher, Michael;
Toppare, Levent

Publication type:

Article

Synthesis and luminescence properties of ZnS:Mn/ZnS core/shell nanorod structures.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2792, doi. 10.1007/s10853-009-3367-1

By:

Jiang, Daixun;
Cao, Lixin;
Su, Ge;
Liu, Wei;
Qu, Hua;
Sun, Yuanguang;
Dong, Bohua

Publication type:

Article

Changes in material properties and surface fractality of multi-walled carbon nanotubes modified by heat and acid treatments.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2780, doi. 10.1007/s10853-009-3366-2

By:

Chiang, Yu-Chun;
Lee, Chen-Yueh

Publication type:

Article

Study of composite joint strength with carbon nanotube reinforcement.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2858, doi. 10.1007/s10853-009-3378-y

By:

Faulkner, S.;
Kwon, Y.;
Bartlett, S.;
Rasmussen, E.

Publication type:

Article

Flexural properties of sandwich beams consisting of air plasma sprayed alloy 625 and nickel alloy foam.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2836, doi. 10.1007/s10853-009-3375-1

By:

Azarmi, F.;
Coyle, T.;
Mostaghimi, J.

Publication type:

Article

High cycle fatigue behavior of as-extruded ZK60 magnesium alloy.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2916, doi. 10.1007/s10853-009-3385-z

By:

Liu, W.;
Dong, J.;
Zhang, P.;
Yao, Z.;
Zhai, C.;
Ding, W.

Publication type:

Article

Optical properties and microstructures of Pd-free Ag–Au–Pt–Cu dental alloys.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2796, doi. 10.1007/s10853-009-3368-0

By:

Shiraishi, Takanobu;
Takuma, Yasuko;
Fujita, Takeshi;
Miura, Eri;
Hisatsune, Kunihiro

Publication type:

Article

Microstructural characterization of nanocrystalline nickel produced by surface mechanical attrition treatment.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2925, doi. 10.1007/s10853-009-3386-y

By:

Li, Wei;
Liu, Ping;
Ma, Fengcang;
Rong, Yonghua

Publication type:

Article

Electrical and mechanical properties of aluminosilicate inorganic polymer composites with carbon nanotubes.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2851, doi. 10.1007/s10853-009-3377-z

By:

MacKenzie, Kenneth;
Bolton, Matthew

Publication type:

Article

Improvement of alkali corrosion resistance of mullite ceramics at high temperature by depositing Ca0.3Mg0.2Zr2(PO4)3 coating.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2938, doi. 10.1007/s10853-009-3389-8

By:

Zhang, Xiaozhen;
Zhou, Jianer;
Wang, Jiandong;
Jiang, Yuahua

Publication type:

Article

Synthesis and characterization of anodized titanium-oxide nanotube arrays.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2820, doi. 10.1007/s10853-009-3372-4

By:

Hu, Michael;
Lai, Peng;
Bhuiyan, M.;
Tsouris, Costas;
Gu, Baohua;
Parans Paranthaman, M.;
Gabitto, Jorge;
Harrison, Latoya

Publication type:

Article

Effects of dynamic strain aging on mechanical properties of SA508 class 3 reactor pressure vessel steel.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2882, doi. 10.1007/s10853-009-3381-3

By:

Xu, S.;
Wu, X.;
Han, E.;
Ke, W.

Publication type:

Article

Development and morphological characterization of wood pulp reinforced biocomposite fibers.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2876, doi. 10.1007/s10853-009-3380-4

By:

Awal, A.;
Ghosh, S.;
Sain, M.

Publication type:

Article

Photoelectrochemical behavior of titania nanotube array grown on nanocrystalline titanium.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2907, doi. 10.1007/s10853-009-3384-0

By:

Xie, Yibing;
Zhou, Limin;
Lu, Jian

Publication type:

Article

Organo-functionalized mesoporous supports for Jacobsen-type catalyst: Laponite versus MCM-41.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2865, doi. 10.1007/s10853-009-3379-x

By:

Das, Pankaj;
Silva, Ana;
Carvalho, Ana;
Pires, João;
Freire, Cristina

Publication type:

Article

Photocatalysis for water oxidation by Fe2O3 nanoparticles embedded in clay compound: correlation between its polymorphs and their photocatalytic activities.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2890, doi. 10.1007/s10853-009-3382-2

By:

Kakuta, Seiji;
Abe, Toshiyuki

Publication type:

Article

Bulk modulus of silicon carbide nanowires and nanosize grains.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 3010, doi. 10.1007/s10853-009-3431-x

By:

Rich, Ryan;
Stelmakh, Svitlana;
Patyk, Jaromir;
Wieligor, Monika;
Zerda, T.;
Guo, Quanzhong

Publication type:

Article

Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2957, doi. 10.1007/s10853-009-3392-0

By:

Das, Debdulal;
Chattopadhyay, Partha

Publication type:

Article

Deposition of thin cobalt films onto silicon by galvanostatic and potentiostatic techniques.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2931, doi. 10.1007/s10853-009-3388-9

By:

Manhabosco, Taíse;
Müller, Iduvirges

Publication type:

Article

Optical properties and structure of R2O–Ga2O3–SiO2 and RO–Ga2O3–SiO2 glasses.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2899, doi. 10.1007/s10853-009-3383-1

By:

Doweidar, H.

Publication type:

Article

Hold-time effects on elevated-temperature low-cycle-fatigue and crack-propagation behaviors of HAYNES® 188 superalloy.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2945, doi. 10.1007/s10853-009-3391-1

By:

Lee, S.;
Lu, Y.;
Liaw, P.;
Chen, L.;
Thompson, S.;
Blust, J.;
Browning, P.;
Bhattacharya, A.;
Aurrecoechea, J.;
Klarstrom, D.

Publication type:

Article

Comment on “preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions”.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2999, doi. 10.1007/s10853-009-3404-0

By:

Liu, Ying;
Choi, Hyoung

Publication type:

Article

A novel approach for synthesis of nanocrystalline MgAl2O4 powders by co-precipitation method.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2992, doi. 10.1007/s10853-009-3397-8

By:

Rashad, M.;
Zaki, Z.;
El-Shall, H.

Publication type:

Article

Sintering, crystallization, and properties of a low-viscosity SnO–MgO–P2O5 glass.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2985, doi. 10.1007/s10853-009-3396-9

By:

Shyu, Jiin-Jyh;
Yeh, Chih-Hsien

Publication type:

Article

Preparation and investigation of PVDF/PMMA/TiO2 composite film.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2977, doi. 10.1007/s10853-009-3395-x

By:

Li, Wei;
Li, Hong;
Zhang, Yong-Ming

Publication type:

Article

Nanocrystalline alumina dispersed in nanocrystalline nickel: enhanced mechanical properties.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2725, doi. 10.1007/s10853-009-3330-1

By:

Jung, A.;
Natter, H.;
Hempelmann, R.;
Lach, E.

Publication type:

Article

Effects of lysine triisocyanate on the mode I fracture behavior of polymer blend of poly ( l-lactic acid) and poly (butylene succinate-co- l-lactate).

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 3006, doi. 10.1007/s10853-009-3428-5

By:

Vannaladsaysy, Vilay;
Todo, Mitsugu;
Takayama, Tetsuo;
Jaafar, Mariatti;
Ahmad, Zulkifli;
Pasomsouk, Korakanh

Publication type:

Article

Microstructure and texture assessment of Al–Mn–Fe–Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes.

Published in:

Journal of Materials Science, 2009, v. 44, n. 11, p. 2966, doi. 10.1007/s10853-009-3393-z

By:

Martins, J.;
Carvalho, A.;
Padilha, A.

Publication type:

Article

Works matching IS 00222461 AND DT 2009 AND VI 44 AND IP 11

Relation between structure and mechanical properties (elastoplastic and fracture behavior) of hybrid organic–inorganic coating.

Synthesis, characterization, and photochromic behaviors of polythiophene derivatives in the solid state.

Influence of polyvinylpyrrolidone on properties of flexible electrically conducting indium tin oxide nanoparticle coatings.

Single step synthesis of nanosized CeO<sub>2</sub>–M<sub> x</sub>O<sub> y</sub> mixed oxides (M<sub> x</sub>O<sub> y</sub> = SiO<sub>2</sub>, TiO<sub>2</sub>, ZrO<sub>2</sub>, and Al<sub>2</sub>O<sub>3</sub>) by microwave induced solution combustion synthesis: characterization and CO oxidation

Facile fabrication of silver/polypyrrole composites by the modified silver mirror reaction.

The interfacial characteristic of SiCp/AZ91 magnesium matrix composites fabricated by stir casting.

Investigation of the thermal and structural properties of single-molecule magnet/polymer nanocomposite films.

Capacitive characteristics of Ni–Co oxide nano-composite via coordination homogeneous co-precipitation method.

Stress-dependent piezoresistivity of tunneling-percolation systems.

Correlation among sintering process, porosity, and creep deformation of refractory concrete.

Electrochemical polymerizatıon of hexachloroethane to form poly(hydridocarbyne): a pre-ceramic polymer for diamond production.

Synthesis and luminescence properties of ZnS:Mn/ZnS core/shell nanorod structures.

Changes in material properties and surface fractality of multi-walled carbon nanotubes modified by heat and acid treatments.

Study of composite joint strength with carbon nanotube reinforcement.

Flexural properties of sandwich beams consisting of air plasma sprayed alloy 625 and nickel alloy foam.

High cycle fatigue behavior of as-extruded ZK60 magnesium alloy.

Optical properties and microstructures of Pd-free Ag–Au–Pt–Cu dental alloys.

Microstructural characterization of nanocrystalline nickel produced by surface mechanical attrition treatment.

Electrical and mechanical properties of aluminosilicate inorganic polymer composites with carbon nanotubes.

Improvement of alkali corrosion resistance of mullite ceramics at high temperature by depositing Ca<sub>0.3</sub>Mg<sub>0.2</sub>Zr<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> coating.

Synthesis and characterization of anodized titanium-oxide nanotube arrays.

Effects of dynamic strain aging on mechanical properties of SA508 class 3 reactor pressure vessel steel.

Development and morphological characterization of wood pulp reinforced biocomposite fibers.

Photoelectrochemical behavior of titania nanotube array grown on nanocrystalline titanium.

Organo-functionalized mesoporous supports for Jacobsen-type catalyst: Laponite versus MCM-41.

Photocatalysis for water oxidation by Fe<sub>2</sub>O<sub>3</sub> nanoparticles embedded in clay compound: correlation between its polymorphs and their photocatalytic activities.

Bulk modulus of silicon carbide nanowires and nanosize grains.

Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel.

Deposition of thin cobalt films onto silicon by galvanostatic and potentiostatic techniques.

Optical properties and structure of R<sub>2</sub>O–Ga<sub>2</sub>O<sub>3</sub>–SiO<sub>2</sub> and RO–Ga<sub>2</sub>O<sub>3</sub>–SiO<sub>2</sub> glasses.

Hold-time effects on elevated-temperature low-cycle-fatigue and crack-propagation behaviors of HAYNES<sup>®</sup> 188 superalloy.

Comment on “preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions”.

A novel approach for synthesis of nanocrystalline MgAl<sub>2</sub>O<sub>4</sub> powders by co-precipitation method.

Sintering, crystallization, and properties of a low-viscosity SnO–MgO–P<sub>2</sub>O<sub>5</sub> glass.

Preparation and investigation of PVDF/PMMA/TiO<sub>2</sub> composite film.

Nanocrystalline alumina dispersed in nanocrystalline nickel: enhanced mechanical properties.

Effects of lysine triisocyanate on the mode I fracture behavior of polymer blend of poly ( l-lactic acid) and poly (butylene succinate-co- l-lactate).

Microstructure and texture assessment of Al–Mn–Fe–Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes.