Works matching IS 00222461 AND DT 2005 AND VI 40 AND IP 11

Results: 52

Effect of pH on crystallization of sputtered hydroxyapatite film under hydrothermal conditions at low temperature.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2837, doi. 10.1007/s10853-005-0420-6

By:

Ozeki, K.;
Aoki, H.;
Fukui, Y.

Publication type:

Article

An investigation on hot-crack mechanism of Ca addition into AZ91D alloy.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2931, doi. 10.1007/s10853-005-2440-7

By:

Tang, Bin;
Li, Shuang-Shou;
Wang, Xi-Shu;
Zeng, Da-Ben;
Wu, Rong

Publication type:

Article

Estimation of reaction conditions for synthesis of nanosized brookite-type titanium dioxide from aqueous TiOCl2 solution.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2843, doi. 10.1007/s10853-005-2434-5

By:

Lee, Jeong;
Yang, Yeong

Publication type:

Article

Influence of color coordinates on the color changes after polymerization and thermocycling of dental resin composites.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2855, doi. 10.1007/s10853-005-2433-6

By:

Lee, Yong-keun

Publication type:

Article

Gas sensing properties of ZnO nanorods prepared by hydrothermal method.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2919, doi. 10.1007/s10853-005-2435-4

By:

Jiaqiang, Xu;
Yuping, Chen;
Yadong, Li;
Jianian, Shen

Publication type:

Article

The effect of polyelectrolyte on fabrication of macroporous ZrO2 ceramics.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2903, doi. 10.1007/s10853-005-2436-3

By:

Jia, Yu;
Duran, Cihangir;
Hotta, Yuji;
Sato, Kimiyasu;
Watari, Koji

Publication type:

Article

Wear and mechanical properties of epoxy/SiO2-TiO2 composites.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2815, doi. 10.1007/s10853-005-2437-2

By:

Lu, Shao-rong;
Hongyu, Jing-;
Zhang, Hai-liang;
Wang, Xia-yu

Publication type:

Article

Effect of nanoclay reinforcement on tensile and tribo behaviour of Nylon 6.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2897, doi. 10.1007/s10853-005-2439-0

By:

Srinath, G.;
Gnanamoorthy, R.

Publication type:

Article

Synthesis and properties of melt-processable hyaluronan esters.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2937, doi. 10.1007/s10853-005-2432-7

By:

Zhang, Min;
James, S. P.

Publication type:

Article

Synthesis, characterization and structural refinement of polycrystalline uranium substituted zirconolite.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2945, doi. 10.1007/s10853-005-2431-8

By:

Shrivastava, O. P.;
Kumar, N.;
Sharma, I. B.

Publication type:

Article

Effect of test conditions on the essential work of fracture in polyethylene terephthalate film.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2861, doi. 10.1007/s10853-005-2430-9

By:

Light, Melissa;
Lesser, Alan

Publication type:

Article

Using hybrid reinforcement methodology to enhance overall mechanical performance of pure magnesium.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2875, doi. 10.1007/s10853-005-2429-2

By:

Wong, W. L. E.;
Gupta, M.

Publication type:

Article

Recombinant osteopontin fragment coating on hydroxyapatite for enhanced osteoblast-like cell responses.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2891, doi. 10.1007/s10853-005-2428-3

By:

Jun, In-kook;
Jang, Jun-hyeog;
Kim, Hae-won;
Kim, Hyoun-ee

Publication type:

Article

Crystallographic and low frequency conductivity studies of the spinel systems CuFe2O4 and Cu1− xZn xGa0.1Fe1.9O4; (0.0 ≤ x ≤ 0.5).

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2923, doi. 10.1007/s10853-005-2427-4

By:

Ata-Allah, S. S.;
Sayedahmed, F. M.;
Kaiser, M.;
Hashhash, A. M.

Publication type:

Article

Nucleation of stress-induced martensites in a Ti/Mo-based alloy.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2833, doi. 10.1007/s10853-005-2426-5

By:

Zhang, L. C.;
Zhou, T.;
Aindow, M.;
Alpay, S. P.;
Blackburn, M. J.;
Wu, M. H.

Publication type:

Article

Synthesis and properties of β type Bi(III)2−2 xDy(II)2 xO3 − x x solid solution.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2951, doi. 10.1007/s10853-005-2425-6

By:

Turkoglu, O.;
Ari, M.;
Soylak, M.;
Belenli, I.

Publication type:

Article

Dynamic mechanical analysis of electron beam irradiated sulphur vulcanized nitrile rubber network—some unique features.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2823, doi. 10.1007/s10853-005-2424-7

By:

Vijayabaskar, V.;
Bhowmick, A.

Publication type:

Article

Blends of ultrasonically devulcanized tire-curing bladder and butyl rubber.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2883, doi. 10.1007/s10853-005-2423-8

By:

Feng, Wenlai;
Isayev, A.

Publication type:

Article

Rapid sintering of ultra-fine WC-10 wt% Co by high-frequency induction heating.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2849, doi. 10.1007/s10853-005-2422-9

By:

Kim, H. C.;
Shon, I. J.;
Munir, Z. A.

Publication type:

Article

Electrochemical copolymerization of indole and 3,4-ethylenedioxythiophene.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2867, doi. 10.1007/s10853-005-2421-x

By:

Jingkun Xu;
Guangming Nie;
Shusheng Zhang;
Xuejun Han;
Jian Hou;
Shouzhi Pu

Publication type:

Article

Electrochemical repairing of pitted 18-8 stainless steel.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2911, doi. 10.1007/s10853-005-2441-6

By:

Duan, H. P.;
Li, Y. C.;
Yan, C. W.

Publication type:

Article

M23C6 precipitation behavior in a Ni-base superalloy M963.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2959, doi. 10.1007/s10853-005-2418-5

By:

He, L. Z.;
Zheng, Q.;
Sun, X. F.;
Hou, G. C.;
Guan, H. R.;
Hu, Z. Q.

Publication type:

Article

Review papers in Journal of Materials Science Volumes 39 and 40.

Published in:: Journal of Materials Science, 2005, v. 40, n. 11, p. 3041, doi. 10.1007/s10853-005-2417-6
Publication type:: Article

Erratum: Counterion effects in cyanine heterojunction photovoltaic devices.

Published in:

2005

By:

Nüsch, Frank;
Faes, Antonin;
Zuppiroli, Libero;
Meng, Fanshun;
Chen, Kongchang;
Tian, He

Publication type:

Erratum

Keyword contents.

Published in:: 2005
Publication type:: Table of Contents

Study of grain boundaries in polycrystalline Cr, Ta and W using nuclear gamma-resonance spectroscopy: Formation enthalpies of vacancy-oxygen complexes and single vacancies in grain boundaries, and dynamic properties of the grain boundary core in polycrystals of BCC metals

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2807, doi. 10.1007/s10853-005-2412-y

By:

Klotsman, S. M.;
Kaigorodov, V. N.;
Dudarev, M. S.;
Ermakov, A. V.;
Rudenko, V. K.

Publication type:

Article

On equilibrium conditions at junctions of anisotropic interfaces.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2803, doi. 10.1007/s10853-005-2411-z

By:

Morawiec, A.

Publication type:

Article

On the design of controlled tricrystal specimens for the systematic investigation of static grain boundary triple junction properties.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2795, doi. 10.1007/s10853-005-2410-0

By:

KREMER, R.;
Narayanan, R.;
Shekhar, S.;
King, A. H.

Publication type:

Article

Bonding of urethane reactants to aluminum surface.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2789, doi. 10.1007/s10853-005-2409-6

By:

Kim, Jangsoon;
Cho, Jaedong;
Lim, Yun-Soo

Publication type:

Article

Dynamic surface properties, wettability and mimic oil recovery of ethanediyl- α, β -bis(cetyldimethylammonium bromide) on dodecane modified silica powder.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2783, doi. 10.1007/s10853-005-2408-7

By:

Bi, Z. C.;
Qi, L. Y.;
Liao, W. S.

Publication type:

Article

A theoretical study of H absorption at a Fe(110)–Pd(100) interface and Fe–Pd alloys.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2775, doi. 10.1007/s10853-005-2407-8

By:

Jasen, P. V.;
Gonzalez, E. A.;
Castellani, N. J.;
Juan, A.

Publication type:

Article

Relation between grain boundary segregation and grain boundary character in FCC alloys.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2765, doi. 10.1007/s10853-005-2406-9

By:

Wynblatt, P.;
Shi, Zhan

Publication type:

Article

Evaluation of the sensitization process in 304 stainless steel strained 50% by cold-rolling.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2965, doi. 10.1007/s10853-005-2404-y

By:

Alvarez, C.;
Almanza, E.;
Murr, L.

Publication type:

Article

Hysteresis in shape memory alloys. Is it always a constant?

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2985, doi. 10.1007/s10853-005-2398-5

By:

Huang, W. M.;
Xu, W.

Publication type:

Article

Preliminary study of calcium phosphate immobilized with Chinese medicine.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3035, doi. 10.1007/s10853-005-2397-6

By:

Qu, S.;
Weng, J.;
Feng, B.;
Jiang, C.;
Wang, J.

Publication type:

Article

Preparation and characterization of brake linings from modified tannin-phenol formaldehyde resin and asbestos-free fillers.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3003, doi. 10.1007/s10853-005-2396-7

By:

Mutlu, I.;
Alma, M. H.;
Basturk, M. A.;
Oner, C.

Publication type:

Article

Low temperature process for the synthesis of rutile phase titania through vapor phase hydrolysis.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2999, doi. 10.1007/s10853-005-2395-8

By:

John, A. K.;
Surender, G. D.

Publication type:

Article

Preparation and characterization of α-FeOOH and α-Fe2O3 by sol–gel method.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3031, doi. 10.1007/s10853-005-2393-x

By:

Dar, M. A.;
Kulkarni, S. K.;
Ansari, Z. A.;
Ansari, S. G.;
Shin, Hyung-Shik

Publication type:

Article

Electrical discharge machining behavior of hotpress MoSi2.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3027, doi. 10.1007/s10853-005-2394-9

By:

Khanra, A.

Publication type:

Article

Storage characteristics of LiNi0.85Co0.15O2 in air as cathode material for lithium-ion batteries.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2995, doi. 10.1007/s10853-005-2392-y

By:

Zhu, X.;
Chen, H.;
Zhan, H.;
Yang, D.;
Zhou, Y.

Publication type:

Article

Fabrication of NdBa2Cu3O7 − x interface-modified ramp-edge junctions by MOCVD.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2981, doi. 10.1007/s10853-005-2391-z

By:

Nakajima, Y.;
Kokubun, H.;
Adachi, S.;
Tarutani, Y.;
Tanabe, K.;
Morishita, T.;
Iwata, N.;
Yamamoto, H.

Publication type:

Article

Friction stir welding of recycled A6061 aluminum plates fabricated by hot-extrusion of machined chips.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2971, doi. 10.1007/s10853-005-2390-0

By:

Shigematsu, Ichinori;
Suzuki, Kazutaka;
Imai, Tsunemichi;
Kwon, Yong-Jai;
Saito, Naobumi

Publication type:

Article

Modification of poly(vinyl alcohol) for improvement of mechanical strength and moisture resistance.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3017, doi. 10.1007/s10853-005-2389-6

By:

Mukherjee, G. S.

Publication type:

Article

Effect of whisker diameter on field emission properties of silicon carbide whiskers grown by chemical vapor deposition.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3025, doi. 10.1007/s10853-005-2388-7

By:

Lim, Dong;
Joo, Byoung;
Jun, Jin;
Choi, Doo

Publication type:

Article

Synthesis of La XCe1 − XB6 whiskers.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2991, doi. 10.1007/s10853-005-2387-8

By:

Carlsson, M.;
García-García, F.;
Johnsson, M.;
Gulian, A.

Publication type:

Article

DC electrical conductivity of Au nanoparticle/chloroform and toluene suspensions.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2979, doi. 10.1007/s10853-005-2386-9

By:

Fang, F.;
Zhang, Y.

Publication type:

Article

Atomic force microscopy studies of cubic BC2N, a new superhard phase.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3009, doi. 10.1007/s10853-005-2385-x

By:

Zinin, P.;
Solozhenko, V.;
Malkin, A.;
Ming, L.

Publication type:

Article

Influence of weave type and reinforcement in the fracture behavior of woven fabric reinforced thermoplastic composites.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2987, doi. 10.1007/s10853-005-2384-y

By:

Zenasni, R.;
Argüelles, A.;
Viña, I.;
García, M. A.;
Viña, J.

Publication type:

Article

Formation of dispersed particles during plasma oxidation.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 3007, doi. 10.1007/s10853-005-2383-z

By:

Khokhryakov, Ye. V.;
Butyagin, P. I.;
Mamaev, A. I.

Publication type:

Article

Preparation of CoO-ZnO-Al2O3-SiO2 monolithic gel by sol-gel method.

Published in:

Journal of Materials Science, 2005, v. 40, n. 11, p. 2975, doi. 10.1007/s10853-005-2382-0

By:

Duan, X.;
Yuan, D.;
Pan, D.;
Luan, C.;
Sun, H.;
Xu, D.;
Lv, M.

Publication type:

Article