Works matching IS 00218995 AND DT 2024 AND VI 141 AND IP 42

Results: 38

Mechanism of improving the mechanical and barrier properties of poly(lactide)/poly(butylene adipate‐co‐terephthalate) blends.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56120

By:

Xie, Yongjian;
Wang, Chenxi;
Gao, Shang;
Li, Zhen;
Cheng, Sheng;
Yin, Haoyan;
Zhou, Yiyang;
Ding, Yunsheng

Publication type:

Article

Thermal kinetic, mechanical and wear properties of glass fiber reinforced polyamide 6 thermoplastic composites.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56119

By:

Vikram, Kamlendra;
Pramanik, Sumit;
Bhaumik, Shubrajit

Publication type:

Article

The influence of the molecular structure of binary block‐type styrene‐butadiene rubber on dynamic mechanical properties under normal and high‐pressure conditions.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56118

By:

Wang, Wenheng;
Zhang, Chunqing;
Liao, Mingyi

Publication type:

Article

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56117

By:

Xu, Mengxia;
Liao, Jingshun;
Luo, Zhu;
He, Ruhui;
Yang, Shenglong;
Li, Hai;
Yang, Yehan

Publication type:

Article

Cavitation behavior of poly(4‐methyl‐1‐pentene)/polypropylene/poly(4‐methyl‐1‐pentene) tri‐layer film: Influence of annealing and stretching temperature.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56116

By:

Shi, Honghui;
Shi, Wenjing;
Chang, Baobao;
Mo, Jiajia;
Huang, Kai;
Wang, Shitong;
Liu, Chuntai;
Shen, Changyu

Publication type:

Article

The influence of phthalonitrile monomer containing oxazine ring on the properties of epoxy/amine system: Curing behavior and thermal stability.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56115

By:

Chen, Zhijiao;
Peng, Cong;
Li, Shichao;
Wu, Zhanjun;
sun, Tao

Publication type:

Article

Synergistic effect of covalent cross‐linking and physical hydrogen bonding associations on the mechanical properties of polyurethane thermoset elastomers.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56114

By:

Zhou, Yu;
Wu, Fang;
Zhu, Liyang;
Geng, Zhishuai;
Yang, Rongjie;
Zhai, Jinxian

Publication type:

Article

Biobased rubber toughened poly(lactic acid) blend for sustainable packaging films: The role of optical purity of poly(lactic acid).

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56113

By:

Rosli, Noor Afizah;
Chen, Ruey Shan;
Dufresne, Alain;
Ahmad, Ishak;
Ahmad, Sahrim;
Shahdan, Dalila;
Shamene, Bathumalai

Publication type:

Article

Impact of oxidized sucrose as a bio‐based crosslinker on thermoformable films made from lupin protein isolate (Lupinus angustifolius L.).

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56109

By:

Maidl, Maximilian;
Englberger, Heidi;
Abbasnia, Amirhossein;
Van Opdenbosch, Daniel;
Zollfrank, Cordt

Publication type:

Article

Preparation and characterization of oxygen‐functionalized graphene‐doped polyvinylidene fluoride ultrafiltration membranes.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56105

By:

Alemdar, Sündüz;
Pekel Bayramgil, Nursel

Publication type:

Article

Effect of different alkoxy POSSs on thermal stability and mechanical properties of silicone rubber.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56104

By:

Yang, Song;
Chen, Xiaoyu;
Xu, Peng;
Shi, Jianjun;
Yao, Qi;
Li, Junning;
Zhou, Ziping;
Chen, Guangxin;
Li, Qifang;
Zhou, Zheng

Publication type:

Article

Effect of ionic liquids on the polymerization behavior of acrylamide‐based copolymers.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56103

By:

Li, Chaoyang;
Wu, Chunyuan;
Jiang, Zhuyang;
Su, Gaoshen;
Yang, Huan;
Yu, Xiaorong;
Wang, JiXing

Publication type:

Article

Preparation and performance study of self‐crosslinking functionalized poly(aryl piperidine) anion exchange membrane.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56112

By:

Tang, Xunwang;
Yu, Zongxue;
Tang, Junlei;
Huang, Jiaqiang;
Zhang, Xiuzhu;
Hou, Jiajia;
Yang, Guangcheng

Publication type:

Article

A magnetic‐directed micro‐particle with near‐IR light triggered guest‐release property.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56110

By:

Ge, Jin;
Cheng, Xiang;
Rong, Lihan;
Cao, Peng‐Fei;
Caldona, Eugene B.;
Advincula, Rigoberto

Publication type:

Article

Effect of polybutadiene grafted methyl methacrylate copolymer on the mechanical performance of PC/ABS composites.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56111

By:

Zuo, Yansheng;
Tang, Qianyi;
Liu, Mengen;
Liu, Baijun;
Zhang, Mingyao

Publication type:

Article

A novel water‐in‐water emulsion drag reducer with instant solubility and viscosity enhancement for slickwater fracturing fluid.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56108

By:

Liu, Shichun;
Tian, Wei;
Wang, Xianwen;
Yang, Xudong;
Xiao, Shuqin;
Cai, Jiaming;
Zhao, Mingwei

Publication type:

Article

Preparation of P/N/Si‐containing covalent organic framework‐based flame retardants and their application in epoxy resins.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56106

By:

Liu, Jian;
Yu, Yongxin;
Ji, Xiaoli

Publication type:

Article

3D printing cross‐scale mold for manufacturing micromixers.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56107

By:

Li, Kai;
Wang, Yexin;
Li, Mingzhen;
Du, Fan;
Wang, Chao;
Fang, Junyang;
Sun, Long;
Wang, Xiaoying;
Ruan, Dianbo;
Shi, Jun;
Li, Jinbang

Publication type:

Article

Curing kinetics and mechanical properties of the epoxy vitrimer based on transesterification and its composite laminates.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56101

By:

Chang, Zhengping;
Gao, Yazhi;
Yan, Kanghe;
Wang, Zhongqi;
Zhao, Menglin;
Zhao, Yang

Publication type:

Article

DOPO chemically modified mesoporous silica composites: Preparation, flame retardancy, and thermodynamic properties.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56100

By:

Tian, Miaomiao;
Chen, Yajie;
Zhang, Qiaoran;
Zhao, Xiaowei;
Li, Xiaohong;
Zhang, Zhijun;
Li, Zhiwei

Publication type:

Article

Improved thermal conductivity of high‐density polyethylene by incorporating hybrid fillers of copper powders and silicon carbide whiskers.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56099

By:

Yang, Gengchen;
Li, Yao;
Liang, Mei;
Xia, Shuang;
Zhou, Shengtai;
Zou, Huawei

Publication type:

Article

3D printing of continuous fiber reinforced thermoplastic composites: Effect of process parameters in X‐band microwave absorption performance.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56098

By:

Qin, Ruosen;
Fu, Hongya;
Han, Zhenyu;
Sun, Shouzheng;
Jin, Hongyu;
Cai, Zhigang

Publication type:

Article

Carbon nanotube functionalization supports mechanical, tribological, and biological response of freeze‐dried ultra‐high molecular weight polyethylene‐based bio‐composites.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56096

By:

Rani, Pooja;
Singh, Indrajeet;
Khare, Deepak;
Balani, Kantesh

Publication type:

Article

A novel thermosensitive porous imprinted polymer for selectively separating ReO4− based on Pickering‐like emulsion polymerization.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56095

By:

Bu, Xianhang;
Chen, Zhengcan;
Lin, Xiaoyu;
Xu, Wan;
Sun, Yuanjun;
Ou, Xiaojian;
Sun, Yuan;
Chen, Zhenbin

Publication type:

Article

Continuous glass fiber‐reinforced polycaprolactone composite produced in a conventional fused filament fabrication equipment: Process modeling and parameters adjustment.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56090

By:

Augusto, Thiago A.;
Crovace, Murilo C.;
Costa, Lidiane C.

Publication type:

Article

Environmental aging influence on mechanical properties of additive manufactured polyamide parts: A statistical approach.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56091

By:

Ghimouz, Chahine;
Kenné, Jean Pierre;
Hof, Lucas A.

Publication type:

Article

Wettability of polyethylene terephthalate melt on steel substrates and the effect of cooling rate on polymer amorphicity.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56097

By:

Nathan, D. Kamala;
Prabhu, K. Narayan

Publication type:

Article

Semi‐aromatic poly(m‐xylylene adipamide‐co‐isophthalamide) copolyamides (MXD6/I): Effect of isophthalic acid on the thermal, crystallization, mechanical, and barrier properties.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56089

By:

Guo, Chaoyi;
Jiang, Jie;
Zhu, Zhihua;
Li, Jinjin;
Zhao, Ling;
Xi, Zhenhao

Publication type:

Article

Self‐healing, low oil leakage and recyclable thermally conductive Al2O3/boron nitride@siloxane composites based on reversible dynamic network.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56094

By:

Tu, Zhiting;
Wu, Weijian;
Hao, Zhifeng;
Chen, Xiang;
Chen, Qiuling;
Huang, Xiaonan;
Selim, Mohamed S.;
Yu, Jian

Publication type:

Article

Preparation of PEK‐C‐toughened epoxy structural adhesive for bonding CF/PEEK composites.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56093

By:

Wang, Dezhi;
Hou, Liran;
Zhao, Liwei;
Li, Hongfeng;
Fan, Xupeng;
Liu, Changwei;
Guo, Zhiyuan;
Qu, Chunyan

Publication type:

Article

Resource utilization of emulsion evaporation modified aluminum industrial refractory waste in the preparation of composite modified asphalt.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56092

By:

Fan, Shencheng;
Tu, Hao;
Muhammad, Yaseen;
Ren, Denghui;
Lai, Fang;
Yang, Qingzhao;
Zhao, Zhenxia;
Li, Jing

Publication type:

Article

Impact of lignocellulosic nanofiber source on the performance of polylactic acid.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56088

By:

Linares, Maidelys González;
Delgado Aguilar, Marc;
Tarrés, Joaquim;
Aguado, Roberto;
Pereira, Miguel;
Valerio, Oscar

Publication type:

Article

Fabrication of CoFe‐layered double hydroxide for flame retardant and smoke suppression of silicone rubber foam.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56087

By:

Shang, Ke;
Jiang, Huijing;
Zhao, Jing;
Zhao, Bi;
Jin, Xing;
Lin, Guide;
Yang, Jinjun;
Wang, Junsheng

Publication type:

Article

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56086

By:

Zhang, Huixian;
Sun, Tonghui;
Xiao, Min;
Bai, Hongwei

Publication type:

Article

Exploring of novel reverse thermally induced phase separation process based on preparation and characterization of polysulfate ultrafiltration membranes with bicontinuous structure.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.56082

By:

Wang, Wei;
Sun, Linghao;
Wang, Jiaqi;
Zeng, Fanfu;
Xu, Baiyu

Publication type:

Article

Inside Cover, Volume 141, Issue 42.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.54191

By:

Maidl, Maximilian;
Englberger, Heidi;
Abbasnia, Amirhossein;
Van Opdenbosch, Daniel;
Zollfrank, Cordt

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.54196
Publication type:: Article

Front Cover, Volume 141, Issue 42.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 42, p. 1, doi. 10.1002/app.54189

By:

Ge, Jin;
Cheng, Xiang;
Rong, Lihan;
Cao, Peng‐Fei;
Caldona, Eugene B.;
Advincula, Rigoberto

Publication type:

Article

Works matching IS 00218995 AND DT 2024 AND VI 141 AND IP 42

Mechanism of improving the mechanical and barrier properties of poly(lactide)/poly(butylene adipate‐co‐terephthalate) blends.

Thermal kinetic, mechanical and wear properties of glass fiber reinforced polyamide 6 thermoplastic composites.

The influence of the molecular structure of binary block‐type styrene‐butadiene rubber on dynamic mechanical properties under normal and high‐pressure conditions.

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin.

Cavitation behavior of poly(4‐methyl‐1‐pentene)/polypropylene/poly(4‐methyl‐1‐pentene) tri‐layer film: Influence of annealing and stretching temperature.

The influence of phthalonitrile monomer containing oxazine ring on the properties of epoxy/amine system: Curing behavior and thermal stability.

Synergistic effect of covalent cross‐linking and physical hydrogen bonding associations on the mechanical properties of polyurethane thermoset elastomers.

Biobased rubber toughened poly(lactic acid) blend for sustainable packaging films: The role of optical purity of poly(lactic acid).

Impact of oxidized sucrose as a bio‐based crosslinker on thermoformable films made from lupin protein isolate (Lupinus angustifolius L.).

Preparation and characterization of oxygen‐functionalized graphene‐doped polyvinylidene fluoride ultrafiltration membranes.

Effect of different alkoxy POSSs on thermal stability and mechanical properties of silicone rubber.

Effect of ionic liquids on the polymerization behavior of acrylamide‐based copolymers.

Preparation and performance study of self‐crosslinking functionalized poly(aryl piperidine) anion exchange membrane.

A magnetic‐directed micro‐particle with near‐IR light triggered guest‐release property.

Effect of polybutadiene grafted methyl methacrylate copolymer on the mechanical performance of PC/ABS composites.

A novel water‐in‐water emulsion drag reducer with instant solubility and viscosity enhancement for slickwater fracturing fluid.

Preparation of P/N/Si‐containing covalent organic framework‐based flame retardants and their application in epoxy resins.

3D printing cross‐scale mold for manufacturing micromixers.

Curing kinetics and mechanical properties of the epoxy vitrimer based on transesterification and its composite laminates.

DOPO chemically modified mesoporous silica composites: Preparation, flame retardancy, and thermodynamic properties.

Improved thermal conductivity of high‐density polyethylene by incorporating hybrid fillers of copper powders and silicon carbide whiskers.

3D printing of continuous fiber reinforced thermoplastic composites: Effect of process parameters in X‐band microwave absorption performance.

Carbon nanotube functionalization supports mechanical, tribological, and biological response of freeze‐dried ultra‐high molecular weight polyethylene‐based bio‐composites.

A novel thermosensitive porous imprinted polymer for selectively separating ReO<sub>4</sub><sup>−</sup> based on Pickering‐like emulsion polymerization.

Continuous glass fiber‐reinforced polycaprolactone composite produced in a conventional fused filament fabrication equipment: Process modeling and parameters adjustment.

Environmental aging influence on mechanical properties of additive manufactured polyamide parts: A statistical approach.

Wettability of polyethylene terephthalate melt on steel substrates and the effect of cooling rate on polymer amorphicity.

Semi‐aromatic poly(m‐xylylene adipamide‐co‐isophthalamide) copolyamides (MXD6/I): Effect of isophthalic acid on the thermal, crystallization, mechanical, and barrier properties.

Self‐healing, low oil leakage and recyclable thermally conductive Al<sub>2</sub>O<sub>3</sub>/boron nitride@siloxane composites based on reversible dynamic network.

Preparation of PEK‐C‐toughened epoxy structural adhesive for bonding CF/PEEK composites.

Resource utilization of emulsion evaporation modified aluminum industrial refractory waste in the preparation of composite modified asphalt.

Impact of lignocellulosic nanofiber source on the performance of polylactic acid.

Fabrication of CoFe‐layered double hydroxide for flame retardant and smoke suppression of silicone rubber foam.

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance.

Exploring of novel reverse thermally induced phase separation process based on preparation and characterization of polysulfate ultrafiltration membranes with bicontinuous structure.

Inside Cover, Volume 141, Issue 42.

Editorial Board, Aims & Scope, Table of Contents.

Front Cover, Volume 141, Issue 42.