Works matching IS 00218995 AND DT 2023 AND VI 140 AND IP 35

Results: 32

Synthesis and properties of high‐performance biobased liquid crystal copolyesters modified by small amount of 2,5‐furandicarboxylic acid.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54473

By:

Wei, Peng;
Zhang, Yanan;
Li, Zhiqiang;
Li, Junhui;
Li, Jiaojiao;
Chen, Caihong;
Xu, Qifan;
Zhang, Yifeng

Publication type:

Article

A comparative analysis of photocatalytic applications using poly[(vanillin‐co‐pyrrole)]/ZnO and TiO2‐based semiconductor under natural sunlight irradiation.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54361

By:

Lahouel, Anas Abderrahmane;
Mekidiche, Mounir;
Slimane, Abdelkader;
Sahli, Nabahat

Publication type:

Article

Enhanced tribological properties of polyimide composite with carbon fiber/graphitic‐carbon nitride nanosheets.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54360

By:

Chen, Beibei;
Yang, Bi;
Tong, Yang;
Dong, Wenquan;
Li, Jiaye;
Qiu, Shu

Publication type:

Article

Tailoring the performance of poly(lactic acid)‐based reactive blends: The effect of vinyl acetate and dicumyl peroxide content.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54353

By:

Ferreira, Eduardo da Silva Barbosa;
do Nascimento, Emanuel Pereira;
Luna, Carlos Bruno Barreto;
dos Santos Filho, Edson Antonio;
Wellen, Renate Maria Ramos;
Araújo, Edcleide Maria

Publication type:

Article

High‐temperature resistance and excellent electrical insulation in epoxy resin blends.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54359

By:

Zhang, Changhai;
Liu, Zeyang;
Zhang, Tiandong;
Wang, Xubin;
Yin, Chao;
Liu, Xianli;
Chi, Qingguo

Publication type:

Article

Study on rheological behavior of polystyrene‐polyisoprene‐polystyrene around viscous flow transformation: Effect of polystyrene block content and molecular weight.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54358

By:

Shang, Zihao;
Luo, Hengyu;
Han, Hui;
Jia, Tingting;
Hu, Haiqing

Publication type:

Article

Epoxy soybean oil plasticized vinyl chloride acrylate waterborne emulsion: Physically mixed versus chemically grafted.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54356

By:

Wei, Jiajun;
Ouyang, Chunfa;
Shan, Xiaoqian;
Gao, Qun;
Zheng, Kangsheng;
Luo, Wei

Publication type:

Article

Preparation of SiO2/Si3N4ws/PU reinforced coating and its reinforcement mechanism for SLS‐molded TPU materials.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54355

By:

Zhang, Cheng;
Wu, Wei;
Hu, Huanbo;
Rui, Zhengguo;
Ye, Junjian;
Wang, Zhengyi;
Wang, Yi;
Shen, Hui

Publication type:

Article

Influences of processing conditions on gradient structures in injection‐molded polyethylene caps and their property correlations.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54354

By:

Rungswang, Wonchalerm;
Nantasetphong, Wiroj;
Jarumaneeroj, Chatchai;
Makkaroon, Bharanabha;
Juabrum, Sawitree;
Kaewsuwan, Dechmongkhon;
Soontaranon, Siriwat;
Rugmai, Supagorn

Publication type:

Article

The effect of reinforcement aspect ratio on the performance of PA66 composites with recycled carbon fiber and upcycled graphene nanoplatelets: An interface characterization from process to modeling.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54352

By:

Dericiler, Kuray;
Zafar, Salman;
Sas, Hatice S.;
Saner Okan, Burcu

Publication type:

Article

A facile approach to fabricating fluorine‐free superhydrophobic cotton fabric with excellent oil–water separation performance.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54357

By:

Xu, Junhuang;
Li, Hongqiang;
Zheng, Longzhu;
Huang, Shangdong;
Fang, Weizhen;
Lai, Xuejun;
Zeng, Xingrong

Publication type:

Article

Synthesis and properties of acyldiphenylphosphine oxides photoinitiators carrying triphenylamine or pyrene group for free radical photopolymerization.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54351

By:

Ma, Guanhao;
Luo, Jiangyu;
Qu, Jinqing

Publication type:

Article

Preparation of two‐component micro‐encapsulated epoxy self‐healing materials based on Pickering emulsion method.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54350

By:

Wang, Rui;
Yu, Fei;
Feng, Hengyu;
Yan, Zhen;
Xiao, Linghan;
Zhu, Wei

Publication type:

Article

Fabrication of 3D‐printed graphene/polylactic acid and carbon nanofiber/polylactic acid electrodes: New solvent‐free electrochemical activation method for hydrogen evolution reactions.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54348

By:

Ateş, Sevgi;
Baran Aydın, Evrim

Publication type:

Article

The influence of phase morphology of polycarbonate/polyethersulfone blends on the failure behavior between the blends and polyurethane in the peel test.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54349

By:

Schneider, Konrad;
Bräuer, Matthias;
Bobeth, Manfred;
Kühnert, Ines;
Malanin, Mikhail;
Schlenstedt, Kornelia;
Pompe, Wolfgang

Publication type:

Article

Role of wood flour on processability of marine biodegradable poly (3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBH)/poly(butylene succinate‐co‐butylene adipate) (PBSA) blends in cast extrusion and thermoforming of take‐away food containers

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54346

By:

Genovesi, Annalisa;
Aversa, Clizia;
Barletta, Massimiliano;
Cappiello, Giulia;
Lignola, Chiara

Publication type:

Article

3D printed heterogeneous cation exchange membrane processed using stereolithography.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54341

By:

Zárybnická, Lucie;
Meloun, Zbyšek;
Šafka, Jiří;
Truxová, Veronika;
Dvořák, Karel;
Machotová, Jana

Publication type:

Article

Enhanced mechanical and tribological properties of polymer nanocomposites by improving interfacial properties by hexagonal boron nitride nanosheets: Molecular dynamics simulations.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54340

By:

Yang, Yadi;
Zhao, Jing;
Cui, Jianzheng;
Jiang, Bowen

Publication type:

Article

Supercritical CO2‐assisted formation of metal–organic framework‐loaded porous polystyrene membranes for dye removal.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54347

By:

Matsuyama, Kiyoshi;
Kawahara, Yuka;
Shoji, Ayano;
Kato, Takafumi;
Okuyama, Tetsuya

Publication type:

Article

Optimization through response surface methodology of 3D printed membrane preparation conditions for use in vanadium redox flow battery: A vanadium/proton selectivity study.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54343

By:

Thiam, Baye Gueye;
El Magri, Anouar;
Vaudreuil, Sébastien

Publication type:

Article

Preparation and comparison of electrospun PEO/PTFE and PVA/PTFE nanofiber membranes for syringe filters.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54344

By:

Akduman, Cigdem

Publication type:

Article

Effects of methoxy polyethylene glycol‐polycaprolactone block copolymers and silica nanoparticles on the mechanical, tissue affinity and antibacterial properties of n‐butyl cyanoacrylate adhesive.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54342

By:

Su, Xiao‐Tong;
Jin, Guo‐Cheng;
Xu, Shi‐Ai

Publication type:

Article

Study of thermal transitions of copolymers based on N‐isopropylacrylamide and acrylic acid with potential for curcumin controlled release.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54338

By:

Ramírez‐Irigoyen, Andya J.;
García‐Verdugo, Karla F.;
Castillo‐Ortega, María Mónica;
Rodríguez‐Félix, Dora E.;
Encinas, José Carmelo;
Plascencia‐Jatomea, Maribel;
Argüelles‐Monal, Waldo;
Sauceda, Irela Santos;
Pérez‐González, Refugio;
del Castillo‐Castro, Teresa

Publication type:

Article

One‐pot synthesis of bio‐polyol from vegetable oil for preparation of bio‐polyurethane based porous sorbent with high oil adsorption capacity.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54332

By:

Hoang, Phan Huy;
Dat, Nguyen Minh;
Hung, Bui Quang

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.52587
Publication type:: Article

Preparation of polyborosiloxanes with systematically changed mechanical properties and correlation of their structure/property relationship.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54339

By:

Xing, Tao;
Chen, Kequan;
Wang, Yiran;
Wu, Zongze;
Xu, Yangguang;
Xu, Yong

Publication type:

Article

Thermal behaviors of ethylene vinyl acetate encapsulants in fielded silicon photovoltaic modules.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54337

By:

Palmiotti, Elizabeth C.;
Roberts, Christine C.;
King, Bruce H.

Publication type:

Article

Microcellular injection molding of foamed engineering plastic parts with high dimensional accuracy.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54336

By:

Feng, Yu‐Teng;
Zhan, Haiying;
Mi, Hao‐Yang;
Antwi‐Afari, Maxwell Fordjour;
Chen, Youfu;
Gu, Laifa;
Dong, Binbin;
Liu, Chuntai;
Shen, Changyu

Publication type:

Article

Plasma‐enhanced immobilization of cerium oxide nanoparticles on a fluorocarbon‐based nanofibrous membranes.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54335

By:

Kormunda, Martin;
Ryšánek, Petr;
Homola, Tomáš;
Henych, Jiří;
Tolasz, Jakub;
Hoskovec, Jakub;
Čapková, Pavla

Publication type:

Article

Facile synthesis of cassava starch‐based bioplastics modified by citric acid‐epoxidized soybean oil oligomers.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54334

By:

Yang, Jianlei;
Xu, Shicai;
Ching, Yern Chee;
Wang, Rui;
Al‐Hada, Naif Mohammed;
Li, Chunhui;
Lv, Dongjun;
Zhang, Zilong

Publication type:

Article

Fabrication of konjac glucomannan‐silk fibroin based biomimetic scaffolds for improved vascularization and soft tissue engineering applications.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.54333

By:

Thangavel, Ponrasu;
Kanniyappan, Hemalatha;
Chakraborty, Sudip;
Chaudhary, Shipra;
Wallepure, Aadinath;
Muthuvijayan, Vignesh

Publication type:

Article

Cover Image, Volume 140, Issue 35.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 35, p. 1, doi. 10.1002/app.52543

By:

Wei, Peng;
Zhang, Yanan;
Li, Zhiqiang;
Li, Junhui;
Li, Jiaojiao;
Chen, Caihong;
Xu, Qifan;
Zhang, Yifeng

Publication type:

Article

Works matching IS 00218995 AND DT 2023 AND VI 140 AND IP 35

Synthesis and properties of high‐performance biobased liquid crystal copolyesters modified by small amount of 2,5‐furandicarboxylic acid.

A comparative analysis of photocatalytic applications using poly[(vanillin‐co‐pyrrole)]/ZnO and TiO<sub>2</sub>‐based semiconductor under natural sunlight irradiation.

Enhanced tribological properties of polyimide composite with carbon fiber/graphitic‐carbon nitride nanosheets.

Tailoring the performance of poly(lactic acid)‐based reactive blends: The effect of vinyl acetate and dicumyl peroxide content.

High‐temperature resistance and excellent electrical insulation in epoxy resin blends.

Study on rheological behavior of polystyrene‐polyisoprene‐polystyrene around viscous flow transformation: Effect of polystyrene block content and molecular weight.

Epoxy soybean oil plasticized vinyl chloride acrylate waterborne emulsion: Physically mixed versus chemically grafted.

Preparation of SiO<sub>2</sub>/Si<sub>3</sub>N<sub>4</sub>ws/PU reinforced coating and its reinforcement mechanism for SLS‐molded TPU materials.

Influences of processing conditions on gradient structures in injection‐molded polyethylene caps and their property correlations.

The effect of reinforcement aspect ratio on the performance of PA66 composites with recycled carbon fiber and upcycled graphene nanoplatelets: An interface characterization from process to modeling.

A facile approach to fabricating fluorine‐free superhydrophobic cotton fabric with excellent oil–water separation performance.

Synthesis and properties of acyldiphenylphosphine oxides photoinitiators carrying triphenylamine or pyrene group for free radical photopolymerization.

Preparation of two‐component micro‐encapsulated epoxy self‐healing materials based on Pickering emulsion method.

Fabrication of 3D‐printed graphene/polylactic acid and carbon nanofiber/polylactic acid electrodes: New solvent‐free electrochemical activation method for hydrogen evolution reactions.

The influence of phase morphology of polycarbonate/polyethersulfone blends on the failure behavior between the blends and polyurethane in the peel test.

Role of wood flour on processability of marine biodegradable poly (3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBH)/poly(butylene succinate‐co‐butylene adipate) (PBSA) blends in cast extrusion and thermoforming of take‐away food containers

3D printed heterogeneous cation exchange membrane processed using stereolithography.

Enhanced mechanical and tribological properties of polymer nanocomposites by improving interfacial properties by hexagonal boron nitride nanosheets: Molecular dynamics simulations.

Supercritical CO<sub>2</sub>‐assisted formation of metal–organic framework‐loaded porous polystyrene membranes for dye removal.

Optimization through response surface methodology of 3D printed membrane preparation conditions for use in vanadium redox flow battery: A vanadium/proton selectivity study.

Preparation and comparison of electrospun PEO/PTFE and PVA/PTFE nanofiber membranes for syringe filters.

Effects of methoxy polyethylene glycol‐polycaprolactone block copolymers and silica nanoparticles on the mechanical, tissue affinity and antibacterial properties of n‐butyl cyanoacrylate adhesive.

Study of thermal transitions of copolymers based on N‐isopropylacrylamide and acrylic acid with potential for curcumin controlled release.

One‐pot synthesis of bio‐polyol from vegetable oil for preparation of bio‐polyurethane based porous sorbent with high oil adsorption capacity.

Editorial Board, Aims & Scope, Table of Contents.

Preparation of polyborosiloxanes with systematically changed mechanical properties and correlation of their structure/property relationship.

Thermal behaviors of ethylene vinyl acetate encapsulants in fielded silicon photovoltaic modules.

Microcellular injection molding of foamed engineering plastic parts with high dimensional accuracy.

Plasma‐enhanced immobilization of cerium oxide nanoparticles on a fluorocarbon‐based nanofibrous membranes.

Facile synthesis of cassava starch‐based bioplastics modified by citric acid‐epoxidized soybean oil oligomers.

Fabrication of konjac glucomannan‐silk fibroin based biomimetic scaffolds for improved vascularization and soft tissue engineering applications.

Cover Image, Volume 140, Issue 35.