Works matching IS 00218995 AND DT 2022 AND VI 139 AND IP 48

Results: 37

The suspending appearance of poly(acrylic acid)‐based rheology modifier in high‐content surfactant: The effect of polymer structure and molecular weight on the rheological properties of the complex systems.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53236

By:

Xie, Zhengyun;
Li, Kai;
Tang, Wei;
Yang, Shulan;
Sun, Yanlin

Publication type:

Article

Crosslinked PMIA ultrafiltration membrane with enhanced permeability via incorporating TMC monomer.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53235

By:

Gao, Ling‐Lin;
Li, Ping‐Ping;
Li, Hua‐Xiang;
Fang, Yin‐Xin;
Lin, Yu‐Fei;
Zhan, Zi‐Ming;
Xu, Zhen‐Liang

Publication type:

Article

Development of PLA/EPDM/SiO2 blended polymer for biodegradable packaging.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53239

By:

Wittawat, Ratanathavorn;
Rittipun, Rungruang;
Nattaporn, Boohuad

Publication type:

Article

Development of polymethylmethacrylate/reduced graphene oxide composite films as thermal interface materials.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53238

By:

Tarcan, Raluca;
Handrea‐Dragan, Madalina;
Leordean, Cosmin‐Ioan;
Cioban, Raul Catalin;
Kiss, Gellert‐Zsolt;
Zaharie‐Butucel, Diana;
Farcau, Cosmin;
Vulpoi, Adriana;
Simon, Simion;
Botiz, Ioan

Publication type:

Article

Incorporation of N,N,‐diethyl‐meta‐toluamide within electrospun nylon‐6/6 nanofibers.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53237

By:

Thum, Matthew D.;
Weise, Nickolaus K.;
Casalini, Riccardo;
Fulton, Ashley C.;
Purdy, Andrew P.;
Lundin, Jeffrey G.

Publication type:

Article

Effects of ambient pressure on structural characteristics of polyacrylonitrile pre‐oxidized fibers.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53240

By:

Shen, Zheyu;
Lan, Zecheng;
Wang, Yu;
Xu, Lianghua

Publication type:

Article

Fabrication of high‐expansion, fully degradable polylactic acid‐based foam with exponent oil/water separation.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53234

By:

Hua, Mengqing;
Chen, Dong;
Xu, Zesheng;
Fang, Yiqun;
Song, Yongming

Publication type:

Article

Mechanical flexible epoxy resins with 100% bio‐based carbon content based on epoxidized vegetable oils.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53233

By:

Schwaiger, Markus;
Resch‐Fauster, Katharina

Publication type:

Article

4,4‐Diphenylmethane diisocyanate coating modified short‐cut carbon fiber enhances the interlaminar shear properties of carbon fiber/epoxy resin composite laminates.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53232

By:

Fan, Meng‐Xuan;
Nie, Hui‐Jie;
Guan, Ji‐Peng;
Wu, Zhi‐Min;
Cao, Miao;
Xu, Xu‐Fan;
Li, Jian;
Dang, Rui‐qiong;
Shen, Xiao‐Jun

Publication type:

Article

Preparation and properties of polyimide dielectric nanocomposites containing polyvinylpyrrolidone chemically functionalized barium titanate by in‐situ synthesis compounding.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53231

By:

Yang, Shang Ke;
Zhang, Zhao Xin;
Zhang, Ai Ping;
Lin, Hai Lan;
Zhang, Xun Tao;
Xiao, Liu Xin;
Bian, Jun;
Chen, Dai Qiang

Publication type:

Article

Service performance of GF/Nano‐Al2O3/PA66 sucker rod centralizer in aqueous environment.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53230

By:

Yan, Yanhong;
Yang, Chengwen;
Yan, Pengjuan;
Wang, Peilong;
Dong, Wenbin;
Jia, Zhining

Publication type:

Article

Multi‐walled carbon nanotubes/carbon fiber fabric multiscale hybrid materials for improving the mechanical and tribological properties of phenolic resin composites.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53229

By:

Wang, Beibei;
Fu, Qiangang;
Liu, Yue;
Lu, Zhenyuan;
Lu, Yaru;
Cao, Sheng

Publication type:

Article

Reinforcing effect of Fe2O3 nanoparticle‐decorated graphene oxide on flexural and wear behaviors of epoxy composites.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53228

By:

Mahaki, Salman;
Khosravi, Hamed;
Tohidlou, Esmaeil

Publication type:

Article

Hybrid based on graphene nanoplatelets and carbon nanotubes obtained in a single‐step approach and its reinforcement effect in an epoxy matrix.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53227

By:

Ramos‐Galicia, Lourdes;
Pérez‐Ramírez, Eduardo E.;
Velasco‐Santos, Carlos;
Licea‐Jiménez, Liliana;
Martínez‐Hernández, Ana L.;
Pérez‐García, Sergio A.;
López‐Ortiz, Alejandro

Publication type:

Article

Alloying synergistic flame retardant effect improving fire resistance and mechanical properties of polyamide 6.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53226

By:

Li, Junxiao;
Qian, Lijun;
Xi, Wang;
Qiu, Yong;
Tang, Wei;
Li, Shanzhe

Publication type:

Article

The effect of polyhedral oligomeric silsesquioxane fillers in non‐isocyanate polyurethane hybrid resins.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53225

By:

MacInnis, Carlee M.;
Younes, Georges R.;
Marić, Milan

Publication type:

Article

Evaluation of bisphenol‐A epoxy cured with diethylenetriamine by using phosphorus containing liquid poly(1,2‐butadiene) as multifunctional additives.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53224

By:

Xiaojing, Lv;
Wang, Jinwei;
Guo, Yong

Publication type:

Article

Elevated‐temperature mechanical performance of GFRP composite with functionalized hybrid nanofiller.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53223

By:

De, Soubhik;
Nuli, Krishna Chaitanya;
Fulmali, Abhinav Omprakash;
Behera, Priyadarhi;
Prusty, Rajesh Kumar

Publication type:

Article

Bond strength and bond mechanism of injection over‐molded woven carbon fiber/PEEK‐short carbon fiber/PEEK composite components.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53222

By:

Deng, Tianzhengxiong;
Huang, Zhigao;
Zheng, Bing;
Jiang, Wei;
Chen, Lu;
Chen, Cheng;
Zhou, Helezi;
Zhou, Huamin

Publication type:

Article

Influence of drawing and annealing on the structure and properties of bio‐based polyamide 56 fibers.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53221

By:

Kang, Hongliang;
Wang, Zhe;
Lin, Na;
Hao, Xinmin;
Liu, Ruigang

Publication type:

Article

Beads‐milling of waste Si sawdust into micro‐flakes and applied in UV‐curable polystyrene composites for anticorrosion coatings.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53220

By:

Lan, Yun‐Xiang;
Yan, Minsi;
Yu, Hsin‐Kai;
Li, Min‐Xue;
Yeh, Jui‐Ming

Publication type:

Article

Hydrogel‐biochar composites for removal of methylene blue: Adsorption performance, characterization, and adsorption isotherm, kinetics, thermodynamics analysis.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53219

By:

Wang, Xiangpeng;
Zheng, Yunxiang;
Zong, Lina;
Zhang, Chunxiao

Publication type:

Article

Influence of variable‐stiffness layup configuration on curing deformation of curved‐surface structures.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53218

By:

Niu, Xuejuan;
Yao, Yan

Publication type:

Article

Effects of residual resistance factor in the mobility control of the polymer flooding.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53217

By:

Cao, Jie;
Zhu, Shijie;
Shu, Zheng;
Shi, Leiting

Publication type:

Article

Synthesis and properties of PAM/PLA composite degradable particle temporary plugging agent.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53216

By:

Li, Daqi;
Li, Fan;
Liu, Jinhua;
Liu, Chong;
Su, Gaoshen;
Yang, Huan;
Yu, Xiaorong

Publication type:

Article

Enhanced flame retardancy of epoxy composites containing melamine polyphosphate‐modified boron nitride.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53215

By:

Shi, Xuejun;
Wei, Baoting;
Gao, Hang

Publication type:

Article

Improvement of coagulating strength and toughness of alkoxysilanes for conservation of cultural heritage.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53214

By:

Nakamura, Yoshinobu;
Nagao, Asuha;
Kontani, Ryo;
Nakane, Yuta;
Nakamura, Takashi;
Tsuruta, Hiroaki;
Suemori, Kaoru;
Suita, Hiroshi;
Hirai, Tomoyasu;
Fujii, Syuji

Publication type:

Article

Conductive polymer‐based coating layer on copper current collector for enhanced performance of Li‐ion battery.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53213

By:

Goyal, Megha;
Bhatnagar, Nitu

Publication type:

Article

An efficient new method for electrospinning chitosan and heparin for the preparation of pro‐angiogenic nanofibrous membranes for wound healing applications.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53212

By:

Shahzadi, Lubna;
Ramzan, Amna;
Anjum, Awais;
Jabbar, Faiza;
Khan, Ather Farooq;
Manzoor, Faisal;
Shahzad, Sohail Anjum;
Chaudhry, Aqif Anwar;
Rehman, Ihtesham ur;
Yar, Muhammad

Publication type:

Article

Determination of residual stresses in amorphous thermoplastic polymers by DMA.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53210

By:

Huskić, Miroslav;
Kusić, Dragan;
Pulko, Irena;
Nardin, Blaž

Publication type:

Article

A novel study on the sandwich‐structure strain sensor using ethylene‐vinyl acetate‐based hot‐melt adhesive mesh web: Fabrication, properties, and modeling.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53209

By:

Qu, Muchao;
Fang, Jiaqiang;
Mu, Chenzhong;
Li, Yanfeng;
Huang, Shaojuan;
Han, Lei;
Hiemer, Stefan;
Xu, Wei;
Qin, Yijing

Publication type:

Article

Novel functional material incorporating flexirubin‐type pigment in polyvinyl alcohol_kefiran/polycaprolactone nanofibers.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53208

By:

Amorim, Lúcia F. A.;
Fangueiro, Raul;
Gouveia, Isabel C.

Publication type:

Article

Preparation and properties of a clean, low‐damage waterproof locking damage multifunctional integrated water‐based fracturing fluid.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53207

By:

Fan, Meiling;
Lai, Xiaojuan;
Tang, Meirong;
Li, Jing;
Wang, Lei;
Gao, Jinhao

Publication type:

Article

Effect of hydrogen bonds on phase structure and crystallization behavior of UPy‐functionalized polyurethane.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53206

By:

Li, Xuemin;
Li, Kun;
Chen, Zhaobin;
Yang, Xiaoniu

Publication type:

Article

Morphology evolution of self‐same nanocomposites hybridized with jumbo‐sized particles.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.53073

By:

Asghari Arpatappeh, Farzin;
Manga, Emel;
Bilge, Kaan;
Aydemir, Berk Emre;
Gülgün, Mehmet Ali;
Papila, Melih

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.51161
Publication type:: Article

Cover Image, Volume 139, Issue 48.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 48, p. 1, doi. 10.1002/app.51160

By:

Asghari Arpatappeh, Farzin;
Manga, Emel;
Bilge, Kaan;
Aydemir, Berk Emre;
Gülgün, Mehmet Ali;
Papila, Melih

Publication type:

Article

Works matching IS 00218995 AND DT 2022 AND VI 139 AND IP 48

The suspending appearance of poly(acrylic acid)‐based rheology modifier in high‐content surfactant: The effect of polymer structure and molecular weight on the rheological properties of the complex systems.

Crosslinked PMIA ultrafiltration membrane with enhanced permeability via incorporating TMC monomer.

Development of PLA/EPDM/SiO<sub>2</sub> blended polymer for biodegradable packaging.

Development of polymethylmethacrylate/reduced graphene oxide composite films as thermal interface materials.

Incorporation of N,N,‐diethyl‐meta‐toluamide within electrospun nylon‐6/6 nanofibers.

Effects of ambient pressure on structural characteristics of polyacrylonitrile pre‐oxidized fibers.

Fabrication of high‐expansion, fully degradable polylactic acid‐based foam with exponent oil/water separation.

Mechanical flexible epoxy resins with 100% bio‐based carbon content based on epoxidized vegetable oils.

4,4‐Diphenylmethane diisocyanate coating modified short‐cut carbon fiber enhances the interlaminar shear properties of carbon fiber/epoxy resin composite laminates.

Preparation and properties of polyimide dielectric nanocomposites containing polyvinylpyrrolidone chemically functionalized barium titanate by in‐situ synthesis compounding.

Service performance of GF/Nano‐Al<sub>2</sub>O<sub>3</sub>/PA66 sucker rod centralizer in aqueous environment.

Multi‐walled carbon nanotubes/carbon fiber fabric multiscale hybrid materials for improving the mechanical and tribological properties of phenolic resin composites.

Reinforcing effect of Fe<sub>2</sub>O<sub>3</sub> nanoparticle‐decorated graphene oxide on flexural and wear behaviors of epoxy composites.

Hybrid based on graphene nanoplatelets and carbon nanotubes obtained in a single‐step approach and its reinforcement effect in an epoxy matrix.

Alloying synergistic flame retardant effect improving fire resistance and mechanical properties of polyamide 6.

The effect of polyhedral oligomeric silsesquioxane fillers in non‐isocyanate polyurethane hybrid resins.

Evaluation of bisphenol‐A epoxy cured with diethylenetriamine by using phosphorus containing liquid poly(1,2‐butadiene) as multifunctional additives.

Elevated‐temperature mechanical performance of GFRP composite with functionalized hybrid nanofiller.

Bond strength and bond mechanism of injection over‐molded woven carbon fiber/PEEK‐short carbon fiber/PEEK composite components.

Influence of drawing and annealing on the structure and properties of bio‐based polyamide 56 fibers.

Beads‐milling of waste Si sawdust into micro‐flakes and applied in UV‐curable polystyrene composites for anticorrosion coatings.

Hydrogel‐biochar composites for removal of methylene blue: Adsorption performance, characterization, and adsorption isotherm, kinetics, thermodynamics analysis.

Influence of variable‐stiffness layup configuration on curing deformation of curved‐surface structures.

Effects of residual resistance factor in the mobility control of the polymer flooding.

Synthesis and properties of PAM/PLA composite degradable particle temporary plugging agent.

Enhanced flame retardancy of epoxy composites containing melamine polyphosphate‐modified boron nitride.

Improvement of coagulating strength and toughness of alkoxysilanes for conservation of cultural heritage.

Conductive polymer‐based coating layer on copper current collector for enhanced performance of Li‐ion battery.

An efficient new method for electrospinning chitosan and heparin for the preparation of pro‐angiogenic nanofibrous membranes for wound healing applications.

Determination of residual stresses in amorphous thermoplastic polymers by DMA.

A novel study on the sandwich‐structure strain sensor using ethylene‐vinyl acetate‐based hot‐melt adhesive mesh web: Fabrication, properties, and modeling.

Novel functional material incorporating flexirubin‐type pigment in polyvinyl alcohol_kefiran/polycaprolactone nanofibers.

Preparation and properties of a clean, low‐damage waterproof locking damage multifunctional integrated water‐based fracturing fluid.

Effect of hydrogen bonds on phase structure and crystallization behavior of UPy‐functionalized polyurethane.

Morphology evolution of self‐same nanocomposites hybridized with jumbo‐sized particles.

Editorial Board, Aims & Scope, Table of Contents.

Cover Image, Volume 139, Issue 48.