Works matching IS 00218995 AND DT 2019 AND VI 136 AND IP 23

Results: 29

Cover Image, Volume 136, Issue 23.

Published in:: Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47764
Publication type:: Article

Effects of the matrix crystallinity, dispersed phase, and processing type on the morphological, thermal, and mechanical properties of polylactide‐based binary blends with poly[(butylene adipate)‐co‐terephthalate] and poly[(butylene succinate)‐co‐adipate]

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47636

By:

Nofar, Mohammadreza;
Oguz, Hazal;
Ovalı, Didem

Publication type:

Article

Effects of sulfonation on bis‐styrylbiphenyl fluorescent whitening agents for polypropylene.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47635

By:

Wu, Feng;
Lin, Liangwei;
Qin, Qiwen;
Au, Chaktong;
Li, Xitian;
Yi, Bing;
Fang, Zhengjun;
Tao, Qiang;
Yu, Donghong

Publication type:

Article

Effects of nanoparticle size and concentration on optical, toughness, and thermal properties of polycarbonate.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47634

By:

Nomai, Jiraporn;
Schlarb, Alois K.

Publication type:

Article

Study on thermal conductive PA6 composites with 3‐dimensional structured boron nitride hybrids.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47630

By:

Wang, Liang;
Wu, Wei;
Ma, Renbo;
Liu, Zhaowen;
Shen, Wanting;
Drummer, Dietmar

Publication type:

Article

PANI‐chitosan‐TiO2 ternary nanocomposite and its effectiveness on antibacterial and antistatic behavior of epoxy coating.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47629

By:

Mirmohseni, Abdolreza;
Rastgar, Mortaza;
Olad, Ali

Publication type:

Article

Physicochemical and mechanical degradation of polyamide 11 induced by hydrolysis and thermal aging.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47628

By:

Lefebvre, X.;
Brusselle‐Dupend, N.;
Klopffer, M.‐H.;
Cangémi, L.;
Maïza, S.;
Castagnet, S.;
Grandidier, J.‐C.

Publication type:

Article

Microencapsulated amino‐functional polydimethylsiloxane as autonomous external self‐healing agent for epoxy systems.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47627

By:

Weihermann, Wanessa R. K.;
Meier, Marcia M.;
Pezzin, Sergio H.

Publication type:

Article

Synthesis and study of a new biopolymer‐based chitosan/hematoxylin grafted to cotton wound dressings.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47625

By:

Alminderej, Fahad M.;
El‐Ghoul, Yassine

Publication type:

Article

Syntheses and optical, electrochemical, and photovoltaic properties of polymers with 6‐(2‐thienyl)‐4H‐thieno[2,3‐b]indole with a variety of electron‐deficient units.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47624

By:

Kim, Juae;
Suh, Hongsuk;
Chae, Sangmin;
Yi, Ahra;
Hong, Seungyeon;
Kim, Hyo Jung

Publication type:

Article

Mechanical properties of continuous bamboo fiber‐reinforced biobased polyamide 11 composites.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47623

By:

Ponteins, Philippe;
Haddou, Geoffrey;
Dandurand, Jany;
Dantras, Eric;
Lacabanne, Colette;
Maiduc, Huynh;
Thai, Hoang;
Giang, Nguyen Vu;
Trung, Tran Huu

Publication type:

Article

CO2‐philic polyether‐block‐amide/glycerol triacetate blend membranes: gas‐permeation performance, thermal stability, and storage stability.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47620

By:

Feng, Shichao;
Ren, Jizhong;
Zhao, Dan;
Li, Hui;
Hua, Kaisheng;
Li, Xinxue;
Deng, Maicun

Publication type:

Article

Thermoplastic starch/whey protein isolate/rosemary essential oil nanocomposites obtained by extrusion process: Antioxidant polymers.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47619

By:

Azevedo, Viviane Machado;
Carvalho, Raissa Alvarenga;
Borges, Soraia Vilela;
Claro, Pedro Ivo Cunha;
Hasegawa, Fernando Ken;
Yoshida, Maria Irene;
Marconcini, José Manoel

Publication type:

Article

A new SiC precursor with high ceramic yield: Synthesis and characterization of CHxMeSiH2‐containing poly(methylsilane‐carbosilane).

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47618

By:

Li, Yongming;
Wang, Xinliang;
Chen, Yi;
Xu, Caihong

Publication type:

Article

Nanoporous hollow fibers as a phantom material for the validation of diffusion magnetic resonance imaging.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47617

By:

Li, Jing‐Song;
Zhang, Chunchen;
Chang, Ming‐Wei;
Ding, Qiuping;
He, Hongjian;
Li, Chen;
Zhong, Jianhui;
Peng, Yu;
Mai, John

Publication type:

Article

Polyimide‐coated fabrics with multifunctional properties: Flame retardant, UV protective, and water proof.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47616

By:

Sezer Hicyilmaz, Ayse;
Altin, Yasin;
Bedeloglu, Ayse

Publication type:

Article

Microstructure–performance relationships of hollow‐fiber membranes with highly efficient separation of oil‐in‐water emulsions.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47615

By:

Hong, Xiao;
Huang, Xiao‐Jun;
Gao, Qiao‐Ling;
Wu, Hui‐Min;
Guo, Yi‐Zong;
Huang, Fu;
Fang, Fei;
Huang, Hua‐Ting;
Chen, Da‐Jing

Publication type:

Article

Preparation of silicone containing 2,2,6,6‐tetramethyl‐4‐piperidinol‐based N‐chloramine for antibacterial polyethylene via interpenetration in supercritical carbon dioxide.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47614

By:

Chen, Yong;
Wang, Yuyu;
Zhang, Qiang;
Yang, Cuiying;
Han, Qiuxia

Publication type:

Article

Curing characteristics and kinetics of EPDM and EOC compounds in co‐vulcanization as blend.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47613

By:

Thitithammawong, Anoma;
Uthaipan, Nattapon;
Junhasavasdikul, Banja;
Nakason, Charoen;
Kalkornsurapranee, Ekwipoo

Publication type:

Article

Utilization of poly(ethylene terephthalate) waste for preparing disodium terephthalate and its application in a solid polymer electrolyte.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47612

By:

Haq, Nazrul;
Shakeel, Faiyaz;
Alanazi, Fars K.;
Shaikh, Hamid;
Bedja, Idriss;
Gupta, Ravindra Kumar

Publication type:

Article

Mechanical, wear, and dielectric behavior of TiO2 reinforced high‐density polyethylene composites.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47610

By:

Ponnuruthiyil Shaji, Akhil;
Shaik, Mahammad Ali;
Golla, Brahma Raju

Publication type:

Article

Influences of diffusion coefficient of 1‐allyl‐3‐methylimidazolium chloride on structure and properties of regenerated cellulose fiber obtained via dry‐jet‐wet spinning.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47609

By:

Zhang, Desheng;
Wang, Yixin;
Shi, Zhenghui

Publication type:

Article

Soft core–hard shell latex particles for mechanically strong VOC‐free polymer films.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47608

By:

Limousin, Elodie;
Ballard, Nicholas;
Asua, José M.

Publication type:

Article

Cage–ladder‐structure, phosphorus‐containing polyhedral oligomeric silsesquinoxanes as promising reactive‐type flame retardants for epoxy resin.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47607

By:

Deng, Kuilin;
Li, Shengnan;
Zhao, Xiaojuan;
Liu, Xinghua;
Yang, Xin;
Yu, Ran;
Zhang, Ying;
Huang, Wei

Publication type:

Article

Roles of the molecular weight of n‐ethylene glycol diacrylates and UV irradiance on the mechanical properties at the gel point of acrylic acid based hydrogels.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47606

By:

Magami, Saminu M.;
Williams, Rhodri L.

Publication type:

Article

Mechanical energy losses in commercial crosslinked low‐density polyethylene in the temperature range between 200 and 400 K.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47605

By:

Lambri, Osvaldo Agustín;
Bonifacich, Federico Guillermo;
Zelada, Griselda Irene;
Mocellini, Ricardo Raúl;
García, José Ángel;
Giordano, Enrique David Victor;
Sánchez, Fernando Ariel;
Plazaola, Fernando

Publication type:

Article

Introduction of two polyvinyl alcohol resins for efficient solid support Cu‐catalyzed N‐arylation of α‐aminoacids with aryl halides in aqueous media.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47597

By:

Kazemnejadi, Milad;
Sardarian, Ali Reza;
Esmaeilpour, Mohsen

Publication type:

Article

Nonisothermal crystallization kinetic studies on melt processed poly(ethylene terephthalate)/polylactic acid blends containing graphene oxide and exfoliated graphite nanoplatelets.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.47569

By:

Jafari, Seyed Mohammad Ali;
Khajavi, Ramin;
Kalaee, Mohammad R.;
Khonakdar, Hossein A.;
Goodarzi, Vahabodin

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2019, v. 136, n. 23, p. N.PAG, doi. 10.1002/app.46783
Publication type:: Article

Works matching IS 00218995 AND DT 2019 AND VI 136 AND IP 23

Cover Image, Volume 136, Issue 23.

Effects of the matrix crystallinity, dispersed phase, and processing type on the morphological, thermal, and mechanical properties of polylactide‐based binary blends with poly[(butylene adipate)‐co‐terephthalate] and poly[(butylene succinate)‐co‐adipate]

Effects of sulfonation on bis‐styrylbiphenyl fluorescent whitening agents for polypropylene.

Effects of nanoparticle size and concentration on optical, toughness, and thermal properties of polycarbonate.

Study on thermal conductive PA6 composites with 3‐dimensional structured boron nitride hybrids.

PANI‐chitosan‐TiO<sub>2</sub> ternary nanocomposite and its effectiveness on antibacterial and antistatic behavior of epoxy coating.

Physicochemical and mechanical degradation of polyamide 11 induced by hydrolysis and thermal aging.

Microencapsulated amino‐functional polydimethylsiloxane as autonomous external self‐healing agent for epoxy systems.

Synthesis and study of a new biopolymer‐based chitosan/hematoxylin grafted to cotton wound dressings.

Syntheses and optical, electrochemical, and photovoltaic properties of polymers with 6‐(2‐thienyl)‐4H‐thieno[2,3‐b]indole with a variety of electron‐deficient units.

Mechanical properties of continuous bamboo fiber‐reinforced biobased polyamide 11 composites.

CO<sub>2</sub>‐philic polyether‐block‐amide/glycerol triacetate blend membranes: gas‐permeation performance, thermal stability, and storage stability.

Thermoplastic starch/whey protein isolate/rosemary essential oil nanocomposites obtained by extrusion process: Antioxidant polymers.

A new SiC precursor with high ceramic yield: Synthesis and characterization of CH<sub>x</sub>MeSiH<sub>2</sub>‐containing poly(methylsilane‐carbosilane).

Nanoporous hollow fibers as a phantom material for the validation of diffusion magnetic resonance imaging.

Polyimide‐coated fabrics with multifunctional properties: Flame retardant, UV protective, and water proof.

Microstructure–performance relationships of hollow‐fiber membranes with highly efficient separation of oil‐in‐water emulsions.

Preparation of silicone containing 2,2,6,6‐tetramethyl‐4‐piperidinol‐based N‐chloramine for antibacterial polyethylene via interpenetration in supercritical carbon dioxide.

Curing characteristics and kinetics of EPDM and EOC compounds in co‐vulcanization as blend.

Utilization of poly(ethylene terephthalate) waste for preparing disodium terephthalate and its application in a solid polymer electrolyte.

Mechanical, wear, and dielectric behavior of TiO<sub>2</sub> reinforced high‐density polyethylene composites.

Influences of diffusion coefficient of 1‐allyl‐3‐methylimidazolium chloride on structure and properties of regenerated cellulose fiber obtained via dry‐jet‐wet spinning.

Soft core–hard shell latex particles for mechanically strong VOC‐free polymer films.

Cage–ladder‐structure, phosphorus‐containing polyhedral oligomeric silsesquinoxanes as promising reactive‐type flame retardants for epoxy resin.

Roles of the molecular weight of n‐ethylene glycol diacrylates and UV irradiance on the mechanical properties at the gel point of acrylic acid based hydrogels.

Mechanical energy losses in commercial crosslinked low‐density polyethylene in the temperature range between 200 and 400 K.

Introduction of two polyvinyl alcohol resins for efficient solid support Cu‐catalyzed N‐arylation of α‐aminoacids with aryl halides in aqueous media.

Nonisothermal crystallization kinetic studies on melt processed poly(ethylene terephthalate)/polylactic acid blends containing graphene oxide and exfoliated graphite nanoplatelets.

Editorial Board, Aims & Scope, Table of Contents.