Works matching IS 00218995 AND DT 2018 AND VI 135 AND IP 14

Results: 39

Water-soluble binder PAALi with terpene resin emulsion as tackifier for Li FePO4 cathode.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46132

By:

He, Jiarong;
Zhong, Haoxiang;
Zhang, Lingzhi

Publication type:

Article

Tunability of polycaprolactone hydrophilicity by carboxymethyl cellulose loading.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46134

By:

Alemán‐Domínguez, M. E.;
Ortega, Z.;
Benítez, A. N.;
Vilariño‐Feltrer, G.;
Gómez‐Tejedor, J. A.;
Vallés‐Lluch, A.

Publication type:

Article

Corrigendum: Adsorption capability of heavy metals by chitosan/poly(ethylene oxide)/activated carbon electrospun nanofibrous membrane.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46083

By:

Shariful, M. I.;
Talebian, S.;
Mehrali, M.;
Ang, B. C.;
Amal, M. A.

Publication type:

Article

Research for SEBS/PPA compound-modified asphalt.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46085

By:

Zhang, Feng;
Hu, Changbin;
Zhang, Yu

Publication type:

Article

Enhanced oil recovery from high-salinity reservoirs by cationic gemini surfactants.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46086

By:

Yuan, Tingjiao;
Liu, Zhe;
Gao, Ruimin;
Hu, Guangfa;
Zhang, Gai;
Zhao, Jianshe

Publication type:

Article

Aliphatic SPI charge-transfer complex hybrid films for high temperature polymer electrolyte membrane fuel cells.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46087

By:

Christiani, Liana;
Sasaki, Kazunari;
Nishihara, Masamichi

Publication type:

Article

Thermal and UV degradation of polypropylene with pro-oxidant. Abiotic characterization.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46088

By:

Arráez, Francisco J.;
Arnal, María Luisa;
Müller, Alejandro J.

Publication type:

Article

Effect of graphene and CNT reinforcement on mechanical and thermomechanical behavior of epoxy-A comparative study.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46101

By:

Bisht, Ankita;
Dasgupta, Kinshuk;
Lahiri, Debrupa

Publication type:

Article

Improving bonding strength between a hydrophilic coating layer and poly(ethylene terephthalate) braid for preparing mechanically stable braid-reinforced hollow fiber membranes.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46104

By:

Zhou, Zhuang;
Fang, Li‐Feng;
Wang, Sheng‐Yao;
Matsuyama, Hideto

Publication type:

Article

Analyzing the influence of different synthetic talcs in waterborne polyurethane nanocomposites obtainment.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46107

By:

Dias, Guilherme;
Prado, Manoela;
Le Roux, Christophe;
Poirier, Mathilde;
Micoud, Pierre;
Ligabue, Rosane;
Martin, François;
Einloft, Sandra

Publication type:

Article

Ionic liquid mediated surface micropatterning of polymer blends.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46109

By:

Lasseuguette, Elsa;
McClements, Jake;
Koutsos, Vasileios;
Schäfer, Thomas;
Ferrari, Maria‐Chiara

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.45594
Publication type:: Article

Comparing laser diffraction and optical microscopy for characterizing superabsorbent polymer particle morphology, size, and swelling capacity.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46055

By:

Davis, Cole R.;
Kelly, Stacey L.;
Erk, Kendra A.

Publication type:

Article

Influence of crosslinking methods toward poly(vinyl alcohol) properties: Microwave irradiation and conventional heating.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46125

By:

Sonker, Amit Kumar;
Verma, Vivek

Publication type:

Article

The effect of mass transfer resistance and nonuniform initial solvent concentration on permeation through polymer membranes.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46126

By:

Zielinski, John M.;
Alsoy Altinkaya, Sacide

Publication type:

Article

Optical sensor based on fluorescent PMMA/PFO electrospun nanofibers for monitoring volatile organic compounds.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46128

By:

Terra, Idelma A. A.;
Sanfelice, Rafaela C.;
Valente, Gustavo T.;
Correa, Daniel S.

Publication type:

Article

Cover Image, Volume 135, Issue 14.

Published in:: Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46196
Publication type:: Article

Properties of polythiourethanes prepared by thiol-isocyanate click reaction.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46070

By:

Shin, Junghwan;
Lee, Joonmo;
Jeong, Han Mo

Publication type:

Article

Comparative mucoadhesive study of hyaluronic acid-based conjugates on different mucosae.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46071

By:

Laffleur, Flavia

Publication type:

Article

Stability and spinnability of modified melamine-formaldehyde resin solution for centrifugal spinning.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46072

By:

Xiong, Chengdong;
Li, Xianglong;
Hou, Teng;
Yang, Bin

Publication type:

Article

Monomer atomic configuration as key feature in governing the gas transport behaviors of polyimide membrane.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46073

By:

Tan, P. C.;
Ooi, B. S.;
Ahmad, A. L.;
Low, S. C.

Publication type:

Article

Mechanical performance of tubular composites reinforced by innovative 3D integrated knitted spacer fabrics.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46074

By:

Omrani, Elahe;
Hasani, Hossein;
Esmaeili, Faraneh

Publication type:

Article

Research of phenolic crosslinker gel for profile control and oil displacement in high temperature and high salinity reservoirs.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46075

By:

Fang, Jichao;
Wang, Jianhai;
Wen, Quanyi;
Fang, Sisi;
He, Xiaoqing;
Ma, Yan;
Wu, Yining;
Dai, Caili

Publication type:

Article

Fully bio-based polyesters derived from 2,5-furandicarboxylic acid (2,5-FDCA) and dodecanedioic acid (DDCA): From semicrystalline thermoplastic to amorphous elastomer.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46076

By:

Jia, Zhen;
Wang, Jinggang;
Sun, Liyuan;
Zhu, Jin;
Liu, Xiaoqing

Publication type:

Article

Polymersome formation mechanism and formation rate in stirred-tank reactors.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46077

By:

Poschenrieder, Sarah T.;
Hanzlik, Marianne;
Castiglione, Kathrin

Publication type:

Article

Layer-by-layer fabrication of nacre inspired epoxy/ MMT multilayered composites.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46079

By:

Batool, Sadia;
Gill, Rohama;
Arshad, Muhammad;
Siddiqi, Humaira Masood;
Qureshi, Shahid Saeed

Publication type:

Article

The enhancement performances of cotton stalk fiber/ PVC composites by sequential two steps modification.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46090

By:

Li, Ya‐Yu;
Wang, Bin;
Wang, Bo;
Ma, Ming‐Guo

Publication type:

Article

Reinforcement of the mechanical properties in nitrile rubber by adding graphene oxide/silicon dioxide hybrid nanoparticles.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46091

By:

Zhang, Zhao;
He, Xianru;
Wang, Xin;
Rodrigues, Alisson M.;
Zhang, Rui

Publication type:

Article

Assessment of degradation of plasticized poly(vinyl chloride) films through polyene formation under isothermal conditions.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46092

By:

Tüzüm Demir, A. P.;
Ulutan, S.

Publication type:

Article

Laser confocal microscopical characterization of toughened epoxy resins: Correlations between structural features and mechanical properties.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46094

By:

Hader‐Kregl, Laura;
Wallner, Gernot M.;
Lang, Reinhold W.;
Strauß, Bernhard

Publication type:

Article

Effect of POSS-grafted titanium dioxide on the electrical and thermal properties of LDPE/ Ti O2 polymer nanocomposite.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46095

By:

Anh, Tung Tran;
Fréchette, Michel;
David, Éric;
Veillette, René;
Moraille, Patricia

Publication type:

Article

Biodegradation of pyridine-based polyether polyurethanes by the Alternaria tenuissima fungus.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46096

By:

Oprea, Stefan;
Potolinca, Violeta Otilia;
Gradinariu, Petronela;
Oprea, Veronica

Publication type:

Article

Simultaneous decision analysis on the structural and mechanical properties of polymeric microcellular nanocomposites foamed using CO2.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46098

By:

Daryadel, Mahsa;
Azdast, Taher;
Hasanzadeh, Rezgar;
Molani, Siamak

Publication type:

Article

Effect of titanium dioxide on the UV-C ageing behavior of silicone rubber.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46099

By:

Zhang, Hui;
Yang, Hao;
Shentu, Baoqing;
Chen, Songjun;
Chen, Ming

Publication type:

Article

A novel thermosensitive triblock copolymer from 100% renewably sourced poly(trimethylene ether) glycol.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46112

By:

Zhang, Cong;
Luan, Huacheng;
Wang, Guiyou

Publication type:

Article

Influence of chemical functionalization of carbon nanotubes on their dispersibility in alkyl methacrylate polymer matrix.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46113

By:

Faraguna, Fabio;
Vidović, Elvira;
Jukić, Ante

Publication type:

Article

A new thermoset for separation of polystyrene and naphthalene in preparative chromatography.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46063

By:

de Oliveira Rosa, Wesley;
Botaro, Vagner R.

Publication type:

Article

Synthesis of reusable silicone foam containing carbon nanotubes for oil spill remediation.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46067

By:

Piperopoulos, Elpida;
Calabrese, Luigi;
Mastronardo, Emanuela;
Proverbio, Edoardo;
Milone, Candida

Publication type:

Article

Biodegradable polymeric injectable implants for long-term delivery of contraceptive drugs.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 14, p. n/a, doi. 10.1002/app.46068

By:

Manoukian, Ohan S.;
Arul, Michael R.;
Sardashti, Naseem;
Stedman, Teagan;
James, Roshan;
Rudraiah, Swetha;
Kumbar, Sangamesh G.

Publication type:

Article

Works matching IS 00218995 AND DT 2018 AND VI 135 AND IP 14

Water-soluble binder PAALi with terpene resin emulsion as tackifier for Li FePO<sub>4</sub> cathode.

Tunability of polycaprolactone hydrophilicity by carboxymethyl cellulose loading.

Corrigendum: Adsorption capability of heavy metals by chitosan/poly(ethylene oxide)/activated carbon electrospun nanofibrous membrane.

Research for SEBS/PPA compound-modified asphalt.

Enhanced oil recovery from high-salinity reservoirs by cationic gemini surfactants.

Aliphatic SPI charge-transfer complex hybrid films for high temperature polymer electrolyte membrane fuel cells.

Thermal and UV degradation of polypropylene with pro-oxidant. Abiotic characterization.

Effect of graphene and CNT reinforcement on mechanical and thermomechanical behavior of epoxy-A comparative study.

Improving bonding strength between a hydrophilic coating layer and poly(ethylene terephthalate) braid for preparing mechanically stable braid-reinforced hollow fiber membranes.

Analyzing the influence of different synthetic talcs in waterborne polyurethane nanocomposites obtainment.

Ionic liquid mediated surface micropatterning of polymer blends.

Editorial Board, Aims & Scope, Table of Contents.

Comparing laser diffraction and optical microscopy for characterizing superabsorbent polymer particle morphology, size, and swelling capacity.

Influence of crosslinking methods toward poly(vinyl alcohol) properties: Microwave irradiation and conventional heating.

The effect of mass transfer resistance and nonuniform initial solvent concentration on permeation through polymer membranes.

Optical sensor based on fluorescent PMMA/PFO electrospun nanofibers for monitoring volatile organic compounds.

Cover Image, Volume 135, Issue 14.

Properties of polythiourethanes prepared by thiol-isocyanate click reaction.

Comparative mucoadhesive study of hyaluronic acid-based conjugates on different mucosae.

Stability and spinnability of modified melamine-formaldehyde resin solution for centrifugal spinning.

Monomer atomic configuration as key feature in governing the gas transport behaviors of polyimide membrane.

Mechanical performance of tubular composites reinforced by innovative 3D integrated knitted spacer fabrics.

Research of phenolic crosslinker gel for profile control and oil displacement in high temperature and high salinity reservoirs.

Fully bio-based polyesters derived from 2,5-furandicarboxylic acid (2,5-FDCA) and dodecanedioic acid (DDCA): From semicrystalline thermoplastic to amorphous elastomer.

Polymersome formation mechanism and formation rate in stirred-tank reactors.

Layer-by-layer fabrication of nacre inspired epoxy/ MMT multilayered composites.

The enhancement performances of cotton stalk fiber/ PVC composites by sequential two steps modification.

Reinforcement of the mechanical properties in nitrile rubber by adding graphene oxide/silicon dioxide hybrid nanoparticles.

Assessment of degradation of plasticized poly(vinyl chloride) films through polyene formation under isothermal conditions.

Laser confocal microscopical characterization of toughened epoxy resins: Correlations between structural features and mechanical properties.

Effect of POSS-grafted titanium dioxide on the electrical and thermal properties of LDPE/ Ti O<sub>2</sub> polymer nanocomposite.

Biodegradation of pyridine-based polyether polyurethanes by the Alternaria tenuissima fungus.

Simultaneous decision analysis on the structural and mechanical properties of polymeric microcellular nanocomposites foamed using CO<sub>2</sub>.

Effect of titanium dioxide on the UV-C ageing behavior of silicone rubber.

A novel thermosensitive triblock copolymer from 100% renewably sourced poly(trimethylene ether) glycol.

Influence of chemical functionalization of carbon nanotubes on their dispersibility in alkyl methacrylate polymer matrix.

A new thermoset for separation of polystyrene and naphthalene in preparative chromatography.

Synthesis of reusable silicone foam containing carbon nanotubes for oil spill remediation.

Biodegradable polymeric injectable implants for long-term delivery of contraceptive drugs.