Works matching IS 00218995 AND DT 2018 AND VI 135 AND IP 11

Results: 35

Microporous membrane fabricated by AMS- GMA- TPE terpolymer grafted polypropylene prepared via extrusion.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46020

By:

Jiang, Shan;
Wang, Wei;
Huang, Tianya;
Ma, Jie;
Ding, Yonghong;
Yu, Qiang

Publication type:

Article

Influence of aspect ratio of fillers on the properties of acrylonitrile butadiene styrene composites.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46023

By:

Ananthapadmanabha, G. S.;
Deshpande, Vikrant

Publication type:

Article

Effect of hybrid hollow microspheres on thermal insulation performance and mechanical properties of silicone rubber composites.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46025

By:

Zhao, Xiong‐Wei;
Zang, Chong‐Guang;
Sun, Ya‐Lun;
Zhang, Yu‐Long;
Wen, Yu-Quan;
Jiao, Qing‐Jie

Publication type:

Article

Methamidophos removal from aqueous solutions using a super adsorbent based on crosslinked poly(vinyl alcohol) hydrogel.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45964

By:

Valdés, Oscar;
Ávila‐Salas, Fabián;
Marican, Adolfo;
Fuentealba, Natalia;
Villaseñor, Jorge;
Arenas‐Salinas, Mauricio;
Argandoña, Yerko;
Durán‐Lara, Esteban F.

Publication type:

Article

Development of biodegradable cellulose- g-poly(butyl acrylate)/kaolin nanocomposite with improved fire retardancy and mechanical properties.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45968

By:

Jena, Dharmendra K.;
Sahoo, Prafulla K.

Publication type:

Article

Surface energy of corona treated PP, PE and PET films, its alteration as function of storage time and the effect of various corona dosages on their bond strength after lamination.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45842

By:

Lindner, Martina;
Rodler, Norbert;
Jesdinszki, Marius;
Schmid, Markus;
Sängerlaub, Sven

Publication type:

Article

Effect of interface and confinement size on the crystallization behavior of PLLA confined in coaxial electrospun fibers.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45980

By:

Zou, Shu‐Fen;
Wang, Rui‐Yang;
Fan, Bin;
Xu, Jun‐Ting;
Fan, Zhi‐Qiang

Publication type:

Article

Reduction of dielectric constant by nanovoids formed through chemical treatment on silica crosslinked polyimide and its effect on properties.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45982

By:

Yoo, Taewon;
Ghorpade, Ravindra V.;
Kim, Kwangin;
Lee, Juheon;
Lee, Sangyoup;
Baek, Seungsu;
Song, Jungkun;
Han, Haksoo

Publication type:

Article

Soft polyurethanes treated by plasma immersion ion implantation: Structural and mechanical properties of the surface-modified layer.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45983

By:

Morozov, Ilya A.;
Mamaev, Alexander S.;
Osorgina, Irina V.;
Beliaev, Anton Y.;
Izumov, Roman I.;
Oschepkova, Tamara E.

Publication type:

Article

Synthesis and properties of non-cytotoxic poly( l-malic acid acetate- co- l-lysine ester)s with thermo-sensitivity as hydrophobic drug nanocarrier.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45984

By:

Yue, Ying;
Fan, Zhihui;
Zheng, Chang;
Ding, Lan;
Wang, Huiying;
Zhang, Miao;
Deng, Kuilin

Publication type:

Article

Preparation and characterizations of RTV epoxy blends using amide maleic anhydride- g-liquid polybutadience as both reactive toughening and curing components.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45985

By:

Wu, Di;
Wang, Jinwei

Publication type:

Article

Electroconductive and catalytic performance of polypyrrole/montmorillonite/silver composites synthesized through in situ oxidative polymerization.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45986

By:

Tran, Xuan Tin;
Park, Sung Soo;
Hussain, Manwar;
Kim, Hee Taik

Publication type:

Article

Rheological and mechanical properties of thermoplastic polyurethane elastomer derived from CO2 copolymer diol.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45974

By:

Xian, Wenqi;
Song, Lina;
Liu, Baohua;
Ding, Hulan;
Li, Zhao;
Cheng, Mengping;
Ma, Le

Publication type:

Article

Enhancement of char-forming and water resistance on ABS modified by poly(4-nitrophenoxy)-phosphazene.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45988

By:

Yang, Yunyun;
Kong, Weibo;
Luo, Hang;
Cao, Xilei;
Cai, Xufu

Publication type:

Article

Comb-shaped copolymer as filtrate loss reducer for water-based drilling fluid.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45989

By:

Liu, Lu;
Pu, Xiaolin;
Rong, Kesheng;
Yang, Yandong

Publication type:

Article

Cover Image, Volume 135, Issue 11.

Published in:: Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46137
Publication type:: Article

Effects of aging on poly(1-trimethylsilyl-1-propyne) membranes irradiated with vacuum ultraviolet radiation for gas separation.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45973

By:

Yoshioka, Tetsuro;
Miyashita, Yoshiki;
Motoo, Taichi;
Saito, Kentaro;
Nagai, Kazukiyo

Publication type:

Article

Water-induced degradations in MWCNT embedded glass fiber/epoxy composites: An emphasis on aging temperature.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45987

By:

Prusty, Rajesh Kumar;
Rathore, Dinesh Kumar;
Ray, Bankim Chandra

Publication type:

Article

Effect of nano-silica on gas permeation properties of polyether-based polyurethane membrane in the presence of esterified canola oil diol as a nucleation agent for hard segments.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45979

By:

Karimi, Mohammad Bagher;
Khanbabaei, Ghader;
Mir Mohamad Sadeghi, Gity;
Jafari, Arman

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45616
Publication type:: Article

Stimuli-sensitive nanostructured poly(sodium 4-styrene sulfonate): Synthesis, characterization, and study of metal ion retention properties.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46001

By:

Palencia, Manuel;
Córdoba, Alexander;
Arrieta, Álvaro

Publication type:

Article

Waterborne poly(urethane-urea) gas permeation membranes for CO2/CH4 separation.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46003

By:

Reis, Rodrigo A.;
Pereira, Juliana H. C.;
Campos, Antoniel C. C.;
Barboza, Elaine M.;
Delpech, Marcia C.;
Cesar, Deborah V.;
Dahmouche, Karim;
Bandeira, Cirlene F.

Publication type:

Article

Solid lipid nanoparticles loaded thermoresponsive pluronic-xanthan gum hydrogel as a transdermal delivery system.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46004

By:

Lee, Min Hyeock;
Shin, Gye Hwa;
Park, Hyun Jin

Publication type:

Article

Thermo-mechanical behavior of poly(butylene terephthalate)/silica nanocomposites.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46006

By:

Russo, P.;
Costantini, A.;
Luciani, G.;
Tescione, F.;
Lavorgna, M.;
Branda, F.;
Silvestri, B.

Publication type:

Article

Compatibilization of the poly(lactic acid)/poly(propylene carbonate) blends through in situ formation of poly(lactic acid)- b-poly(propylene carbonate) copolymer.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.46009

By:

Wang, Zhao;
Zhang, Min;
Liu, Zhengying;
Zhang, Shuyang;
Cao, Zhiqiang;
Yang, Wei;
Yang, Mingbo

Publication type:

Article

Surface modification of poly(ethylene terephthalate) fibers via controlled radical graft polymerization.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45990

By:

Tamizifar, Maryam;
Sun, Gang

Publication type:

Article

Hydrolytic stability of polylactide and poly(methyl methacrylate) blends.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45991

By:

Rodriguez, Edwin;
Shahbikian, Shant;
Marcos, Bernard;
Huneault, Michel A.

Publication type:

Article

Modified polyacrylonitrile fiber as a renewable heterogeneous base catalyst for Henry reaction and Gewald reaction in water.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45992

By:

Li, Pengyu;
Liu, Yuanyuan;
Wang, Lu;
Tao, Minli;
Zhang, Wenqin

Publication type:

Article

Roll-to-roll nanoimprint lithography of ultrafiltration membrane.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45993

By:

Hutfles, Jacob;
Chapman, Wesley;
Pellegrino, John

Publication type:

Article

Industrially viable technique for the preparation of HDPE/fly ash composites at high loading: Thermal, mechanical, and rheological interpretations.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45995

By:

Verma, Pawan;
Kumar, Anuj;
Chauhan, Sampat Singh;
Verma, Meenakshi;
Malik, Rajender Singh;
Choudhary, Veena

Publication type:

Article

Electrical conductivity transformation mechanism of GNPs/ CB/ SR nanocomposite foams.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45996

By:

Liu, Caixia;
Wu, Can;
Hao, Chao;
Liu, Ping;
Guo, Xiaohui;
Zhang, Yugang;
Huang, Ying

Publication type:

Article

Fabrication of a functionally graded and magnetically responsive shape memory polymer using a 3 D printing technique and its characterization.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45997

By:

Hassan, Rizwan Ul;
Jo, Soohwan;
Seok, Jongwon

Publication type:

Article

Synthesis of phosphorus- and phenyl-based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene-IFR system.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45998

By:

Turgut, Gizem;
Işıksel, Ecem;
Kahraman, Gizem;
Eren, Tarik;
Özkoç, Güralp

Publication type:

Article

Hot-melt adhesives based on co-polyamide and multiwalled carbon nanotubes.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45999

By:

Latko‐Durałek, Paulina;
Macutkevic, Jan;
Kay, Christopher;
Boczkowska, Anna;
McNally, Tony

Publication type:

Article

Prediction of plasticity-controlled failure in polyamide 6: Influence of temperature and relative humidity.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 11, p. n/a, doi. 10.1002/app.45942

By:

Parodi, Emanuele;
Peters, Gerrit W. M.;
Govaert, Leon E.

Publication type:

Article

Works matching IS 00218995 AND DT 2018 AND VI 135 AND IP 11

Microporous membrane fabricated by AMS- GMA- TPE terpolymer grafted polypropylene prepared via extrusion.

Influence of aspect ratio of fillers on the properties of acrylonitrile butadiene styrene composites.

Effect of hybrid hollow microspheres on thermal insulation performance and mechanical properties of silicone rubber composites.

Methamidophos removal from aqueous solutions using a super adsorbent based on crosslinked poly(vinyl alcohol) hydrogel.

Development of biodegradable cellulose- g-poly(butyl acrylate)/kaolin nanocomposite with improved fire retardancy and mechanical properties.

Surface energy of corona treated PP, PE and PET films, its alteration as function of storage time and the effect of various corona dosages on their bond strength after lamination.

Effect of interface and confinement size on the crystallization behavior of PLLA confined in coaxial electrospun fibers.

Reduction of dielectric constant by nanovoids formed through chemical treatment on silica crosslinked polyimide and its effect on properties.

Soft polyurethanes treated by plasma immersion ion implantation: Structural and mechanical properties of the surface-modified layer.

Synthesis and properties of non-cytotoxic poly( l-malic acid acetate- co- l-lysine ester)s with thermo-sensitivity as hydrophobic drug nanocarrier.

Preparation and characterizations of RTV epoxy blends using amide maleic anhydride- g-liquid polybutadience as both reactive toughening and curing components.

Electroconductive and catalytic performance of polypyrrole/montmorillonite/silver composites synthesized through in situ oxidative polymerization.

Rheological and mechanical properties of thermoplastic polyurethane elastomer derived from CO<sub>2</sub> copolymer diol.

Enhancement of char-forming and water resistance on ABS modified by poly(4-nitrophenoxy)-phosphazene.

Comb-shaped copolymer as filtrate loss reducer for water-based drilling fluid.

Cover Image, Volume 135, Issue 11.

Effects of aging on poly(1-trimethylsilyl-1-propyne) membranes irradiated with vacuum ultraviolet radiation for gas separation.

Water-induced degradations in MWCNT embedded glass fiber/epoxy composites: An emphasis on aging temperature.

Effect of nano-silica on gas permeation properties of polyether-based polyurethane membrane in the presence of esterified canola oil diol as a nucleation agent for hard segments.

Editorial Board, Aims & Scope, Table of Contents.

Stimuli-sensitive nanostructured poly(sodium 4-styrene sulfonate): Synthesis, characterization, and study of metal ion retention properties.

Waterborne poly(urethane-urea) gas permeation membranes for CO<sub>2</sub>/CH<sub>4</sub> separation.

Solid lipid nanoparticles loaded thermoresponsive pluronic-xanthan gum hydrogel as a transdermal delivery system.

Thermo-mechanical behavior of poly(butylene terephthalate)/silica nanocomposites.

Compatibilization of the poly(lactic acid)/poly(propylene carbonate) blends through in situ formation of poly(lactic acid)- b-poly(propylene carbonate) copolymer.

Surface modification of poly(ethylene terephthalate) fibers via controlled radical graft polymerization.

Hydrolytic stability of polylactide and poly(methyl methacrylate) blends.

Modified polyacrylonitrile fiber as a renewable heterogeneous base catalyst for Henry reaction and Gewald reaction in water.

Roll-to-roll nanoimprint lithography of ultrafiltration membrane.

Industrially viable technique for the preparation of HDPE/fly ash composites at high loading: Thermal, mechanical, and rheological interpretations.

Electrical conductivity transformation mechanism of GNPs/ CB/ SR nanocomposite foams.

Fabrication of a functionally graded and magnetically responsive shape memory polymer using a 3 D printing technique and its characterization.

Synthesis of phosphorus- and phenyl-based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene-IFR system.

Hot-melt adhesives based on co-polyamide and multiwalled carbon nanotubes.

Prediction of plasticity-controlled failure in polyamide 6: Influence of temperature and relative humidity.