Works matching IS 00218995 AND DT 2017 AND VI 134 AND IP 42

Results: 29

Copolymers from methyl methacrylate and butyl acrylate with hyperbranched architecture.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45356

By:

Sengupta, Srijoni;
Das, Tamalika;
Ghorai, Uttam Kumar;
Bandyopadhyay, Abhijit

Publication type:

Article

Codeposition of catechol-polyethyleneimine followed by interfacial polymerization for nanofiltration membranes with enhanced stability.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45422

By:

Qiu, Wen‐Ze;
Du, Yong;
Lv, Yan;
Yang, Hao‐Cheng;
Xu, Zhi‐Kang

Publication type:

Article

Melt linear viscoelastic rheological analysis to assess the microstructure of polyamide 6-acrylonitrile butadiene styrene terpolymer immiscible blends via the application of fractional Zener and Coran models.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45423

By:

Aminjafari, Mahboobeh;
Entezam, Mehdi;
Sadeghi, Morteza;
Masoumi, Mahmood;
Khonakdar, Hossein Ali;
Jafari, Seyed Hassan

Publication type:

Article

Improving collagen extraction through an alternative strategy based on succinic anhydride pretreatment to retain collagen's triple-helix structure.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45424

By:

Xu, Zhou;
Guan, Xiaoyu;
Liu, Jie;
Fan, Haojun;
Chen, Yi

Publication type:

Article

Quasi-isothermal DSC testing of epoxy adhesives using initial fast heating rates.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45425

By:

Puentes, John;
Restrepo‐Zapata, Nora Catalina;
Chaloupka, Alexander;
Duddleston, Lukas J. L.;
Rudolph, Natalie;
Osswald, Tim A.

Publication type:

Article

Evaluation of the antifouling and photocatalytic properties of novel poly(vinylidene fluoride) membranes with a reduced graphene oxide-Bi2WO6 active layer.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45426

By:

Li, Yukun;
Zhu, Liang

Publication type:

Article

Synthesis and characterization of elastomeric, biobased, nonisocyanate polyurethane from natural rubber.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45427

By:

Jaratrotkamjorn, Ruedee;
Nourry, Arnaud;
Pasetto, Pamela;
Choppé, Emilie;
Panwiriyarat, Wannarat;
Tanrattanakul, Varaporn;
Pilard, Jean‐François

Publication type:

Article

Fabrication and photocatalytic behavior of a novel nanocomposite hydrogels containing Fe-octacarboxylic acid phthalocyanine.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45428

By:

Yuan, Zhicheng;
Chen, Dajun

Publication type:

Article

Preparation, characterization, antibacterial properties, and hemostatic evaluation of ibuprofen-loaded chitosan/gelatin composite films.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45441

By:

Li, Hongbin;
Cheng, Feng;
Gao, Shuzhen;
Wu, Zhonghui;
Dong, Lulu;
Lin, Shenghui;
Luo, Ze;
Li, Xiaoyu

Publication type:

Article

Prospects use of hybrid layered double hydroxides-polyacrylamide as controlled release media for antibiotic molecules.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45442

By:

Allou, N'guadi Blaise;
Bordoloi, Palakshi;
Goswamee, Rajib Lochan

Publication type:

Article

Effect of methyl position on the dynamic mechanical and shape-memory properties of cresol-based polybenzoxazines.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45443

By:

Liu, Yanfang;
Song, Shuning;
Su, Xuehui;
Wang, Aiqing;
Shen, Shanshan;
Li, Cuiyun

Publication type:

Article

Poly(vinyl alcohol)/ Ca CO3-diacid nanocomposite: Investigation of physical and wetting properties and application in heavy metal adsorption.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45414

By:

Mallakpour, Shadpour;
Khadem, Elham

Publication type:

Article

Relaxation dynamic and electrical mobility for poly(methyl methacrylate)-polyaniline composites.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45415

By:

Moussa, Mohammed A.;
Ghoneim, Ahmed M.;
Abdel Rehim, Mona H.;
Khairy, Sherif A.;
Soliman, Mohamed A.;
Turky, Gamal M.

Publication type:

Article

Effect of aggregate size on liquid absorption characteristics of konjac glucomannan superabsorbent.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45416

By:

Yang, Fang;
Zhang, Mei;
Yang, Hao;
Yan, Wenli;
Jiang, Fatang

Publication type:

Article

Effects of coating solvent and thermal treatment on transport and morphological characteristics of PDMS/ Torlon composite hollow fiber membrane.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45418

By:

Rownaghi, Ali A.;
Bhandari, Dhaval;
Burgess, Steven K.;
Mikkilineni, Dharmik S.

Publication type:

Article

Development of protein-based bioplastics modified with different additives.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45430

By:

Felix, M.;
Perez‐Puyana, V.;
Romero, A.;
Guerrero, A.

Publication type:

Article

Advanced isoconversional cure kinetic analysis of epoxy/poly(furfuryl alcohol) bio-resin system.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45432

By:

Mohajeri, Sahar;
Vafayan, Mehdy;
Ghanbaralizadeh, Roza;
Pazokifard, Shahla;
Zohuriaan Mehr, Mohammad Jalal

Publication type:

Article

Quartz crystal resonator study of glass transitions in polyvinylbutyral ( PVB) films.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45433

By:

Du, Xianbin;
Tang, Xuefeng;
Fang, Jiajie;
Zhu, Da‐Ming

Publication type:

Article

Curing kinetics and curing process of phenolic impregnated carbon ablator.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45434

By:

Tian, Ye;
Huang, Haiming;
Xu, Xiaoliang

Publication type:

Article

Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45435

By:

Josupeit, Stefan;
Schmid, Hans‐Joachim

Publication type:

Article

Effects of water on drawability, structure, and mechanical properties of poly(vinyl alcohol) melt-spun fibers.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45436

By:

Ding, Hengchun;
Lin, Shuidong;
Li, Li

Publication type:

Article

Development of amidoxime functionalized silica by radiation-induced grafting.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45437

By:

Khan, Ijaz Ahmed;
Yasin, Tariq;
Hussain, Hazrat

Publication type:

Article

Oxidation-grafting surface modification of waste silicone rubber composite insulator powder: Characterizations and properties of EPDM/modified waste powder composites.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45438

By:

Sun, Bin;
Du, Zhenxia;
Cao, Hongwei;
Du, Linjuan;
Yu, Wenlian

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.44322
Publication type:: Article

Drug transport in stimuli responsive acrylic and methacrylic interpenetrating polymer networks.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45380

By:

Simeonov, Marin;
Monova, Antonia;
Kostova, Bistra;
Vassileva, Elena

Publication type:

Article

Combination of cellulose nanofibers and chain-end-functionalized polyethylene and their applications in nanocomposites.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45387

By:

Dang, Xiaofei;
Cao, Xinyu;
Ke, Linnan;
Ma, Yongmei;
An, Jingjing;
Wang, Fosong

Publication type:

Article

Fabrication and characterization of carbon nanofibers from polyacrylonitrile/pitch blends.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45388

By:

Liu, Chang;
Lafdi, Khalid

Publication type:

Article

Cover Image, Volume 134, Issue 42.

Published in:: Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45571
Publication type:: Article

Effects of the reagent molar ratio on the phase separation and properties of waterborne polyurethane for application in a water-based ink binder.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 42, p. n/a, doi. 10.1002/app.45406

By:

Zhihui, Yang;
Guangfeng, Wu;
Huixuan, Zhang

Publication type:

Article

Works matching IS 00218995 AND DT 2017 AND VI 134 AND IP 42

Copolymers from methyl methacrylate and butyl acrylate with hyperbranched architecture.

Codeposition of catechol-polyethyleneimine followed by interfacial polymerization for nanofiltration membranes with enhanced stability.

Melt linear viscoelastic rheological analysis to assess the microstructure of polyamide 6-acrylonitrile butadiene styrene terpolymer immiscible blends via the application of fractional Zener and Coran models.

Improving collagen extraction through an alternative strategy based on succinic anhydride pretreatment to retain collagen's triple-helix structure.

Quasi-isothermal DSC testing of epoxy adhesives using initial fast heating rates.

Evaluation of the antifouling and photocatalytic properties of novel poly(vinylidene fluoride) membranes with a reduced graphene oxide-Bi<sub>2</sub>WO<sub>6</sub> active layer.

Synthesis and characterization of elastomeric, biobased, nonisocyanate polyurethane from natural rubber.

Fabrication and photocatalytic behavior of a novel nanocomposite hydrogels containing Fe-octacarboxylic acid phthalocyanine.

Preparation, characterization, antibacterial properties, and hemostatic evaluation of ibuprofen-loaded chitosan/gelatin composite films.

Prospects use of hybrid layered double hydroxides-polyacrylamide as controlled release media for antibiotic molecules.

Effect of methyl position on the dynamic mechanical and shape-memory properties of cresol-based polybenzoxazines.

Poly(vinyl alcohol)/ Ca CO<sub>3</sub>-diacid nanocomposite: Investigation of physical and wetting properties and application in heavy metal adsorption.

Relaxation dynamic and electrical mobility for poly(methyl methacrylate)-polyaniline composites.

Effect of aggregate size on liquid absorption characteristics of konjac glucomannan superabsorbent.

Effects of coating solvent and thermal treatment on transport and morphological characteristics of PDMS/ Torlon composite hollow fiber membrane.

Development of protein-based bioplastics modified with different additives.

Advanced isoconversional cure kinetic analysis of epoxy/poly(furfuryl alcohol) bio-resin system.

Quartz crystal resonator study of glass transitions in polyvinylbutyral ( PVB) films.

Curing kinetics and curing process of phenolic impregnated carbon ablator.

Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories.

Effects of water on drawability, structure, and mechanical properties of poly(vinyl alcohol) melt-spun fibers.

Development of amidoxime functionalized silica by radiation-induced grafting.

Oxidation-grafting surface modification of waste silicone rubber composite insulator powder: Characterizations and properties of EPDM/modified waste powder composites.

Editorial Board, Aims & Scope, Table of Contents.

Drug transport in stimuli responsive acrylic and methacrylic interpenetrating polymer networks.

Combination of cellulose nanofibers and chain-end-functionalized polyethylene and their applications in nanocomposites.

Fabrication and characterization of carbon nanofibers from polyacrylonitrile/pitch blends.

Cover Image, Volume 134, Issue 42.

Effects of the reagent molar ratio on the phase separation and properties of waterborne polyurethane for application in a water-based ink binder.