Works matching IS 00218995 AND DT 2017 AND VI 134 AND IP 15

Results: 28

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44285
Publication type:: Article

Hydrolytic degradation of biobased poly(butylene succinate- co-furandicarboxylate) and poly(butylene adipate- co-furandicarboxylate) copolyesters under mild conditions.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44674

By:

Peng, Shuangbao;
Wu, BinShuang;
Wu, Linbo;
Li, Bo‐Geng;
Dubois, Philippe

Publication type:

Article

Poly( N-[4 H-1,2,4-triazol-4-yl]acrylamide) with different ratio of poly(vinyl chloride) composite membrane for liquid phase sensing of alcohol.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44675

By:

Mahato, Manmatha;
Ghosh, Alokesh;
Roy, Hena;
Bhattacharyya, Nabarun;
Adhikari, Basudam

Publication type:

Article

Synthesis and properties of hybrid materials obtained by in situ copolymerization of ethylene and propylene in the presence of Al2O3 nanofibers (NafenTM) on catalytic system rac-Et(2-MeInd)2ZrMe2/isobutylalumoxane

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44678

By:

Bravaya, Natalia M.;
Galiullin, Al'bert N.;
Saratovskikh, Stanislav L.;
Panin, Andrei N.;
Faingol'd, Еvgenyi E.;
Vasil'ev, Sergei G.;
Bubnova, Maria L.;
Volkov, Vitalii I.

Publication type:

Article

Blend modification of feather keratin-based films using sodium alginate.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44680

By:

He, Ming;
Zhang, Buning;
Dou, Yao;
Yin, Guoqiang;
Cui, Yingde

Publication type:

Article

Effects of ultraviolet aging on the surface properties and tribological performance of polyformaldehyde.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44684

By:

Chen, Song;
Duan, Haitao;
Xu, Haiping;
Wei, Lei;
Cheng, Bingxue;
Jia, Dan;
Li, Jian

Publication type:

Article

Effects of reversed arrangement of electrodes on electrospun nanofibers.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44687

By:

Li, Zhuang;
Liu, Ruigang;
Huang, Yong;
Zhou, Ji

Publication type:

Article

Fabrication of polysulfone nanocomposite membranes with silver-doped carbon nanotubes and their antifouling performance.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44688

By:

Khalid, Arsalan;
Ibrahim, Ahmed;
Al‐Hamouz, Othman Charles S.;
Laoui, Tahar;
Benamor, Abdelbaki;
Atieh, Mautaz Ali

Publication type:

Article

Thermal, mechanical, and dielectric studies on the DGEBA epoxy blends by using liquid oxidized poly(1,2-butadiene) as a reactive component.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44689

By:

Gao, Limei;
Wang, Jinwei

Publication type:

Article

Viscoelastic rheology in the melting and crystallization domain: Application to polypropylene copolymers.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44690

By:

Aris‐Brosou, Margaux;
Vincent, Michel;
Agassant, Jean‐François;
Billon, Noëlle

Publication type:

Article

Quantitative electron tomography of PLA/clay nanocomposites to understand the effect of the clays in the thermal stability.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44691

By:

Iturrondobeitia, Maider;
Guraya, Teresa;
Okariz, Ana;
Srot, Vesna;
van Aken, Peter A.;
Ibarretxe, Julen

Publication type:

Article

A traditional aboriginal condiment as an antioxidant agent in the development of biodegradable active packaging.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44692

By:

López de Dicastillo, Carol;
Bruna, Julio;
Torres, Alejandra;
Alvarado, Nancy;
Guarda, Abel;
Galotto, María José

Publication type:

Article

Photochemistry of 2,6-di(4′-azidobenzylidene)-methylcyclohexanone in polymer matrices.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44694

By:

Avadanei, Mihaela

Publication type:

Article

Inducing surface porosity in aqueous-quenched, microporous Nylon 11 and Nylon 12 films.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44695

By:

Funk, Caleb V.;
Billovits, Gerald F.;
Koreltz, Michael S.;
Dooley, Joseph;
Chiou, Nan‐Rong

Publication type:

Article

Antioxidation and mechanism of phosphites including the free phenolic hydroxyl group in polypropylene.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44696

By:

Meng, Xin;
Jiang, Zewen;
Xin, Zhong;
Chen, Weijie;
Sheng, Yan;
Wu, Chushi

Publication type:

Article

Morphology control of conducting polypyrrole nanostructures via operational conditions in the emulsion polymerization.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44697

By:

Khadem, Fatemeh;
Pishvaei, Malihe;
Salami‐Kalajahi, Mehdi;
Najafi, Farhood

Publication type:

Article

Photochromic properties of color-matching, double-shelled microcapsules covalently bonded onto cotton fabric and applications to outdoor clothing.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44698

By:

Fan, Fei;
Wu, Yingzhu

Publication type:

Article

Rice husk-derived porous carbon/silica particles as green filler for electronic package application.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44699

By:

Hsieh, Ya‐Yu;
Chen, Tsung‐Yi;
Kuo, Wei‐Chiao;
Lai, Yi‐Shao;
Yang, Ping‐Feng;
Lin, Hong‐Ping

Publication type:

Article

Biodegradability of and interaction in the packaging of poly(3-hydroxybutyrate- co-3-hydroxyvalerate)-vermiculite bionanocomposites.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44700

By:

Costa Reis, Dilson Cristino;
Oliveira, Thainá Araújo;
Carvalho, Laura Hecker;
Soares Alves, Tatianny;
Barbosa, Renata

Publication type:

Article

Correlation of the polymer hydrophilicity and membrane fabrication process on the properties of asymmetric membranes in a vapor-induced phase-inversion process.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44701

By:

Zhu, Jianhua;
Zhang, Qifeng;
Zheng, Jifu;
Hou, Shuhua;
Zhang, Suobo;
Li, Shenghai

Publication type:

Article

Biopolymer agar-agar doped with NH4SCN as solid polymer electrolyte for electrochemical cell application.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44702

By:

Selvalakshmi, S.;
Vijaya, N.;
Selvasekarapandian, S.;
Premalatha, M.

Publication type:

Article

Incorporation of graphitic nano-filler and poly(lactic acid) in fused deposition modeling.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44703

By:

Yu, Wang Wang;
Zhang, Jie;
Wu, Jin Rong;
Wang, Xin Zhou;
Deng, Yu He

Publication type:

Article

Polypropylene with high melt flow rate and high isotacticity prepared by phosphate-mixed external donors.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44704

By:

Zhou, Qian;
Xu, Hao;
Wang, Ailian;
Ma, Zhifeng;
Li, Huayi;
Zhang, Liaoyun;
Hu, Youliang

Publication type:

Article

Dielectric cure determination of a thermosetting epoxy composite prepreg.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44707

By:

Park, Heejin

Publication type:

Article

Three-dimensional electrospun micropatterned cellulose acetate nanofiber surfaces with tunable wettability.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44709

By:

Kakunuri, Manohar;
Wanasekara, Nandula D.;
Sharma, Chandra S.;
Khandelwal, Mudrika;
Eichhorn, Stephen J.

Publication type:

Article

Development of water-based polymeric dye and its application as a colorant for waterborne polyurethane.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44710

By:

Shang, Songmin;
Chiu, Ka‐lok;
Jiang, Shouxiang

Publication type:

Article

Poly(vinylidene fluoride) hollow-fiber membranes containing silver/graphene oxide dope with excellent filtration performance.

Published in:

Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44713

By:

Fan, Yaofang;
Quan, Xie;
Zhao, Huimin;
Chen, Shuo;
Yu, Hongtao;
Zhang, Yaobin;
Zhang, Qi

Publication type:

Article

Cover Image, Volume 134, Issue 15.

Published in:: Journal of Applied Polymer Science, 2017, v. 134, n. 15, p. n/a, doi. 10.1002/app.44837
Publication type:: Article

Works matching IS 00218995 AND DT 2017 AND VI 134 AND IP 15

Editorial Board, Aims & Scope, Table of Contents.

Hydrolytic degradation of biobased poly(butylene succinate- co-furandicarboxylate) and poly(butylene adipate- co-furandicarboxylate) copolyesters under mild conditions.

Poly( N-[4 H-1,2,4-triazol-4-yl]acrylamide) with different ratio of poly(vinyl chloride) composite membrane for liquid phase sensing of alcohol.

Synthesis and properties of hybrid materials obtained by in situ copolymerization of ethylene and propylene in the presence of Al<sub>2</sub>O<sub>3</sub> nanofibers (Nafen<sup>TM</sup>) on catalytic system rac-Et(2-MeInd)<sub>2</sub>ZrMe<sub>2</sub>/isobutylalumoxane

Blend modification of feather keratin-based films using sodium alginate.

Effects of ultraviolet aging on the surface properties and tribological performance of polyformaldehyde.

Effects of reversed arrangement of electrodes on electrospun nanofibers.

Fabrication of polysulfone nanocomposite membranes with silver-doped carbon nanotubes and their antifouling performance.

Thermal, mechanical, and dielectric studies on the DGEBA epoxy blends by using liquid oxidized poly(1,2-butadiene) as a reactive component.

Viscoelastic rheology in the melting and crystallization domain: Application to polypropylene copolymers.

Quantitative electron tomography of PLA/clay nanocomposites to understand the effect of the clays in the thermal stability.

A traditional aboriginal condiment as an antioxidant agent in the development of biodegradable active packaging.

Photochemistry of 2,6-di(4′-azidobenzylidene)-methylcyclohexanone in polymer matrices.

Inducing surface porosity in aqueous-quenched, microporous Nylon 11 and Nylon 12 films.

Antioxidation and mechanism of phosphites including the free phenolic hydroxyl group in polypropylene.

Morphology control of conducting polypyrrole nanostructures via operational conditions in the emulsion polymerization.

Photochromic properties of color-matching, double-shelled microcapsules covalently bonded onto cotton fabric and applications to outdoor clothing.

Rice husk-derived porous carbon/silica particles as green filler for electronic package application.

Biodegradability of and interaction in the packaging of poly(3-hydroxybutyrate- co-3-hydroxyvalerate)-vermiculite bionanocomposites.

Correlation of the polymer hydrophilicity and membrane fabrication process on the properties of asymmetric membranes in a vapor-induced phase-inversion process.

Biopolymer agar-agar doped with NH<sub>4</sub>SCN as solid polymer electrolyte for electrochemical cell application.

Incorporation of graphitic nano-filler and poly(lactic acid) in fused deposition modeling.

Polypropylene with high melt flow rate and high isotacticity prepared by phosphate-mixed external donors.

Dielectric cure determination of a thermosetting epoxy composite prepreg.

Three-dimensional electrospun micropatterned cellulose acetate nanofiber surfaces with tunable wettability.

Development of water-based polymeric dye and its application as a colorant for waterborne polyurethane.

Poly(vinylidene fluoride) hollow-fiber membranes containing silver/graphene oxide dope with excellent filtration performance.

Cover Image, Volume 134, Issue 15.