Works matching IS 00218995 AND DT 2016 AND VI 133 AND IP 47

Results: 29

Synthesis and characterization of polyimide/modified m COC composites.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44144

By:

Cheng, Yao-Yi;
Hsiao, Hsin-Min;
Li, Zong-Xuan;
Ho, Ming-Jaan;
Hsu, Mao-Feng;
Hsiang, Shou‐Jui

Publication type:

Article

Electrospun poly(hydroxybutyrate)/chitosan blend fibrous scaffolds for cartilage tissue engineering.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44171

By:

Sadeghi, Davoud;
Karbasi, Saeed;
Razavi, Shahnaz;
Mohammadi, Sajjad;
Shokrgozar, Mohammad Ali;
Bonakdar, Shahin

Publication type:

Article

Fast-swelling superabsorbent polymers with polymerizable macromolecular surfactant as crosslinker.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44173

By:

Chen, Haiming;
Huang, He

Publication type:

Article

Tunable molecular weights of poly(triphenylamine-2,2′-bithiophene) and their effects on photovoltaic performance as sensitizers for dye-sensitized solar cells.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44182

By:

Wang, Haizhen;
Ding, Wenhui;
Wang, Gang;
Pan, Chunyue;
Duan, Meihong;
Yu, Guipeng

Publication type:

Article

Carbon nanotubes-polymer nanocomposites for controlled heating materials.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44194

By:

Januszko, Adam;
Peszke, Jerzy;
Jaworska, Urszula;
Pawlicka, Agnieszka

Publication type:

Article

Waterborne polyurethane nanocomposites based on vegetable oil and microfibrillated cellulose.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44207

By:

Hormaiztegui, María Eugenia Victoria;
Mucci, Verónica Luján;
Santamaria‐Echart, Arantzazu;
Corcuera, María Ángeles;
Eceiza, Arantxa;
Aranguren, Mirta Inés

Publication type:

Article

Enhancing water swelling ability and mechanical properties of water-swellable rubber by PAA/SBS nanofiber mats.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44213

By:

Dehbari, Nazila;
Tavakoli, Javad;
Zhao, Jinchao;
Tang, Youhong

Publication type:

Article

Low temperature cure of epoxy thermosets attaining high Tg using a uniform microwave field.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44222

By:

Hubbard, Robert L.;
Michael Strain, S.;
Willemsen, Connor;
Tyler, David R.

Publication type:

Article

Process-structure-property relationship of melt spun poly(lactic acid) fibers produced in the spunbond process.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44225

By:

Shim, Eunkyoung;
Pourdeyhimi, Behnam;
Shiffler, Don

Publication type:

Article

Crystallinity, ion conductivity, and thermal and mechanical properties of poly(ethylene oxide)-illite nanocomposites with exfoliated illite as a filler.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44226

By:

Zhen, Ran;
Chi, Qianwen;
Wang, Xingyuan;
Yang, Kuo;
Jiang, YinShan;
Li, FangFei;
Xue, Bing

Publication type:

Article

Synthesis and characterization of novel pentaerythritol ester as PVC plasticizer.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44227

By:

Wang, Yigang;
Nie, Xiaoan;
Li, Xiaoying

Publication type:

Article

Fabrication of PFO- DBT: OXCBA nanostructured composite via hard template.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44228

By:

Fakir, Muhamad Saipul;
Supangat, Azzuliani;
Sulaiman, Khaulah

Publication type:

Article

Correlation study of damp heat and pressure cooker testing on backsheets.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44230

By:

Ottersböck, Bettina;
Oreski, Gernot;
Pinter, Gerald

Publication type:

Article

Utilization of ramon seeds ( Brosimum alicastrum swarts) as a new source material for thermoplastic starch production.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44235

By:

Rolando Ríos‐Soberanis, Carlos;
Javier Estrada‐León, Raciel;
Manuel Moo‐Huchin, Víctor;
José Cabrera‐Sierra, María;
Manuel Cervantes‐Uc, José;
Arturo Bello‐Pérez, Luis;
Pérez‐Pacheco, Emilio

Publication type:

Article

Transparency and water vapor barrier properties of polybenzoxazine-silica nanocomposites provided with perhydropolysilazane.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44238

By:

Lee, Joo Yeon;
Saito, Reiko

Publication type:

Article

Electromagnetic interference shielding properties of PEDOT/PSS-halloysite nanotube (HNTs) hybrid films.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44242

By:

Luo, Shi‐Jun;
Zhang, Ping;
Mei, Yin‐Ang;
Chang, Jun‐Biao;
Yan, Hu

Publication type:

Article

Gelation performance of poly(ethylene imine) crosslinking polymer-layered silicate nanocomposite gel system for potential water-shutoff use in high-temperature reservoirs.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44243

By:

Pu, Wan‐Fen;
Yang, Yang;
Yuan, Cheng‐Dong

Publication type:

Article

Influence of the introduction of flexible alkyl chains on the thermal behavior and mechanical properties of mesogenic epoxy thermosets.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44244

By:

Harada, Miyuki;
Okamoto, Naoki;
Ochi, Mitsukazu

Publication type:

Article

Functionalization of carbon nanotubes with (3-glycidyloxypropyl)-trimethoxysilane: Effect of wrapping on epoxy matrix nanocomposites.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44245

By:

Hoepfner, Jean Carlos;
Pezzin, Sérgio Henrique

Publication type:

Article

Fabrication of thermally expandable core-shell microcapsules using organic and inorganic stabilizers and their application.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44247

By:

Jeoung, Sun Kyoung;
Han, In Soo;
Jung, Yung Jun;
Hong, Sanghyun;
Shim, Sang Eun;
Hwang, Ye Jin;
Lee, Pyoung‐Chan;
Ha, Jin Uk

Publication type:

Article

Facile fabrication of superhydrophobic polyaniline structures and their anticorrosive properties.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44248

By:

Xu, Hui;
Liu, Jiayue;
Chen, Yong;
Tang, Jing;
Zhao, Zeting

Publication type:

Article

Polyurethane foams from oligomers derived from waste tire crumbs and polycaprolactone diols.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44251

By:

Rattanapan, Suwat;
Pasetto, Pamela;
Pilard, Jean‐François;
Tanrattanakul, Varaporn

Publication type:

Article

Starch foam material performance prediction based on a radial basis function artificial neural network trained by bare-bones particle swarm optimization with an adaptive disturbance factor.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44252

By:

Xia, Ruting;
Huang, Xingyuan;
Li, Mengshan

Publication type:

Article

Production of polyvinylpyrrolidone/chiral diacid modified nanocrystalline Mg-substituted fluorapatite nanocomposites: Morphological and thermal characterization.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44254

By:

Mallakpour, Shadpour;
Khani, Marziyeh;
Mallakpour, Fereshteh;
Fathi, Mohammadhossein

Publication type:

Article

Controlling micro- and nanofibrillar morphology of polymer blends in low-speed melt spinning process. Part II: Influences of extrusion rate on morphological changes of a PLA/ PVA blend through a capillary die.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44258

By:

Tran, Nguyen Hoai An;
Brünig, Harald;
Auf der Landwehr, Maria;
Vogel, Roland;
Pionteck, Jürgen;
Heinrich, Gert

Publication type:

Article

Controlling micro- and nanofibrillar morphology of polymer blends in low-speed melt spinning process. Part I. Profiles of PLA/ PVA-filament parameters along the spinline.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44258

By:

Tran, Nguyen Hoai An;
Brünig, Harald;
Heinrich, Gert

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.43148
Publication type:: Article

Cover Image, Volume 133, Issue 47.

Published in:: Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.43349
Publication type:: Article

Evaluation of mechanical properties of Al2O3 and TiO2 nano filled enhanced glass fiber reinforced polymer composites.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 47, p. n/a, doi. 10.1002/app.44274

By:

Nayak, Ramesh Kumar;
Mahato, K. K.;
Routara, B. C.;
Ray, Bankim Chandra

Publication type:

Article

Works matching IS 00218995 AND DT 2016 AND VI 133 AND IP 47

Synthesis and characterization of polyimide/modified m COC composites.

Electrospun poly(hydroxybutyrate)/chitosan blend fibrous scaffolds for cartilage tissue engineering.

Fast-swelling superabsorbent polymers with polymerizable macromolecular surfactant as crosslinker.

Tunable molecular weights of poly(triphenylamine-2,2′-bithiophene) and their effects on photovoltaic performance as sensitizers for dye-sensitized solar cells.

Carbon nanotubes-polymer nanocomposites for controlled heating materials.

Waterborne polyurethane nanocomposites based on vegetable oil and microfibrillated cellulose.

Enhancing water swelling ability and mechanical properties of water-swellable rubber by PAA/SBS nanofiber mats.

Low temperature cure of epoxy thermosets attaining high T<sub>g</sub> using a uniform microwave field.

Process-structure-property relationship of melt spun poly(lactic acid) fibers produced in the spunbond process.

Crystallinity, ion conductivity, and thermal and mechanical properties of poly(ethylene oxide)-illite nanocomposites with exfoliated illite as a filler.

Synthesis and characterization of novel pentaerythritol ester as PVC plasticizer.

Fabrication of PFO- DBT: OXCBA nanostructured composite via hard template.

Correlation study of damp heat and pressure cooker testing on backsheets.

Utilization of ramon seeds ( Brosimum alicastrum swarts) as a new source material for thermoplastic starch production.

Transparency and water vapor barrier properties of polybenzoxazine-silica nanocomposites provided with perhydropolysilazane.

Electromagnetic interference shielding properties of PEDOT/PSS-halloysite nanotube (HNTs) hybrid films.

Gelation performance of poly(ethylene imine) crosslinking polymer-layered silicate nanocomposite gel system for potential water-shutoff use in high-temperature reservoirs.

Influence of the introduction of flexible alkyl chains on the thermal behavior and mechanical properties of mesogenic epoxy thermosets.

Functionalization of carbon nanotubes with (3-glycidyloxypropyl)-trimethoxysilane: Effect of wrapping on epoxy matrix nanocomposites.

Fabrication of thermally expandable core-shell microcapsules using organic and inorganic stabilizers and their application.

Facile fabrication of superhydrophobic polyaniline structures and their anticorrosive properties.

Polyurethane foams from oligomers derived from waste tire crumbs and polycaprolactone diols.

Starch foam material performance prediction based on a radial basis function artificial neural network trained by bare-bones particle swarm optimization with an adaptive disturbance factor.

Production of polyvinylpyrrolidone/chiral diacid modified nanocrystalline Mg-substituted fluorapatite nanocomposites: Morphological and thermal characterization.

Controlling micro- and nanofibrillar morphology of polymer blends in low-speed melt spinning process. Part II: Influences of extrusion rate on morphological changes of a PLA/ PVA blend through a capillary die.

Controlling micro- and nanofibrillar morphology of polymer blends in low-speed melt spinning process. Part I. Profiles of PLA/ PVA-filament parameters along the spinline.

Editorial Board, Aims & Scope, Table of Contents.

Cover Image, Volume 133, Issue 47.

Evaluation of mechanical properties of Al<sub>2</sub>O<sub>3</sub> and TiO<sub>2</sub> nano filled enhanced glass fiber reinforced polymer composites.