Works matching IS 00218995 AND DT 2016 AND VI 133 AND IP 38

Results: 27

Influence of a rigid polystyrene block on the free volume and ionic conductivity of a gel polymer electrolyte based on poly(methyl methacrylate)- block-polystyrene.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43901

By:

Guan, Xinghua;
Chen, Fang;
Li, Zhiguang;
Zhou, Hualong;
Ma, Xiaoyan

Publication type:

Article

Understanding of intermolecular interaction in PVDF/PTW blends: Crystallization behavior, thermal, and dynamic mechanical properties.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43908

By:

Lu, Jiajun;
Bai, Huiyu;
Wang, Wei;
Zhang, Shengwen;
Wang, Jinyuan;
Zhang, Yong;
Liu, Xiaoya

Publication type:

Article

Preparation and swelling behavior of moisture-absorbing polyurethane films impregnated with superabsorbent sodium polyacrylate particles.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43973

By:

Lee, Jeong Hoon;
Lee, Seung Geol

Publication type:

Article

Sequential liquefaction of Nicotiana tabacum stems biomass by crude polyhydric alcohols for the production of polyols and rigid polyurethane foams.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43974

By:

Patel, Chirag M.;
Barot, Amit A.;
Kumar Sinha, Vijay

Publication type:

Article

Conducting epoxy networks modified with non-covalently functionalized multi-walled carbon nanotube with imidazolium-based ionic liquid.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43976

By:

Lopes Pereira, Elaine C.;
Soares, Bluma G.

Publication type:

Article

Synthesis and mechanical properties of high impact polystyrene with in situ bulk polymerization toughened by one-pot Nd-based styrene-isoprene-butadiene terpolymer rubber.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43979

By:

Li, Tingting;
Li, Li;
Xu, Qiang;
Wang, Yurong;
Li, Yang

Publication type:

Article

Electropolymerization of aniline in phosphonium-based ionic liquids and their application as protective films against corrosion.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43923

By:

Ortaboy, Sinem

Publication type:

Article

Hybrid organosiloxane coatings containing epoxide precursors for protecting mild steel against corrosion in a saline medium.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43947

By:

Suleiman, Rami;
Estaitie, Mohammed;
Mizanurahman, Mohammad

Publication type:

Article

Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43948

By:

Arbeiter, Florian J.;
Frank, Andreas;
Pinter, Gerald

Publication type:

Article

Editorial Board, Aims & Scope, Table of Contents.

Published in:: Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.44024
Publication type:: Article

Cover Image, Volume 133, Issue 38.

Published in:: Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.42996
Publication type:: Article

Morphology and mechanical properties of natural rubber latex films modified by exfoliated Na-montmorillonite/polyethyleneimine- g-poly (methyl methacrylate) nanocomposites.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43961

By:

Wang, Shuyi;
Tian, Xiaohui;
Sun, Jinyu;
Liu, Jin;
Duan, Junchao

Publication type:

Article

Numerical investigation of spinneret geometric effect on spinning dynamics of dry-jet wet-spinning of cellulose/[BMIM]Cl solution.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43962

By:

Xia, Xiaolin;
Wang, Jianning;
Wang, Huaping;
Zhang, Yumei

Publication type:

Article

Producing high-quality precursor polymer and fibers to achieve theoretical strength in carbon fibers: A review.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43963

By:

Kaur, Jasjeet;
Millington, Keith;
Smith, Shaun

Publication type:

Article

A pre-polyaddition mediation of castor oil for polyurethane formation.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43964

By:

Sharma, Chandan;
Edatholath, Saji S.;
Raman Unni, A.;
Umasankar Patro, T.;
Aswal, Vinod K.;
Rath, Sangram K.;
Harikrishnan, G.

Publication type:

Article

Development of lignin carbon fibers: Evaluation of the carbonization process.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43965

By:

Kleinhans, Henrik;
Salmén, Lennart

Publication type:

Article

Chemorheological time-temperature-transformation-viscosity diagram: Foamed EPDM rubber compound.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43966

By:

Restrepo‐Zapata, Nora Catalina;
Eagleburger, Ben;
Saari, Travis;
Osswald, Tim A;
Hernández‐Ortiz, Juan Pablo

Publication type:

Article

Novel polyurea polymers with enhanced mechanical properties.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43967

By:

Toader, Gabriela;
Rusen, Edina;
Teodorescu, Mircea;
Diacon, Aurel;
Stanescu, Paul O.;
Rotariu, Traian;
Rotariu, Adrian

Publication type:

Article

Viscoelastic properties of borax loaded CMC- g- cl-poly(AAm) hydrogel composites and their boron nutrient release behavior.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43969

By:

Sarkar, Dhruba Jyoti;
Singh, Anupama;
Gaur, Shalini Rudra;
Shenoy, Aroon V

Publication type:

Article

Simultaneous measurement of the molecular weight distribution and 5-ethylidene-2-norbornene content across the molecular weight distribution of ethylene-propylene-diene terpolymer via a new size exclusion chromatography-ultraviolet-refractive index method

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43911

By:

Zhou, Z.;
Janco, M.;
Cong, R.;
Lee, D.;
Shan, C. Li Pi;
Boopalachandran, P.;
Shi, Z.;
Miller, M. D.;
Winniford, B.;
Huang, T.;
Herceg, E.;
Salazar, I.;
Pangburn, T.;
Sandlin, A.;
Fan, L.;
Wu, J.

Publication type:

Article

Removal of Pb2+ and Cd2+ from drinking water using polysaccharide extract isolated from cactus pads ( Opuntia ficus indica).

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43913

By:

Onditi, Mariah;
Adelodun, Adedeji A.;
Changamu, Evans O.;
Ngila, Jane C.

Publication type:

Article

The suitable itaconic acid content in polyacrylonitrile copolymers used for PAN-based carbon fibers.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43919

By:

Fu, Zhongyu;
Liu, Baijun;
Deng, Yunjiao;
Ma, Jianying;
Cao, Chunlei;
Wang, Jing;
Ao, Yuhui;
Zhang, Huixuan

Publication type:

Article

Microstructural, wetting, and dielectric properties of plasma polymerized polypyrrole thin films.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43982

By:

Koduru, Hari Krishna;
Marino, Lucia;
Vallivedu, Janardhanam;
Choi, Chel‐Jong;
Scaramuzza, Nicola

Publication type:

Article

Polypropylene/polystyrene blends prepared by diffusion and subsequent polymerization in polypropylene pellets after injection molding.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43983

By:

Chen, Fang;
Guo, Zhao‐Xia;
Yu, Jian

Publication type:

Article

Influence of cure conditions on out-of-autoclave bismaleimide composite laminates.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43984

By:

Anandan, Sudharshan;
Dhaliwal, Gurjot S.;
Samaranayake, V. A.;
Chandrashekhara, K.;
Berkel, Thomas R.;
Pfitzinger, Doug

Publication type:

Article

Covalent integration of differently structured polyester polyols improves the toughness and strength of cationically polymerized, amorphous epoxy networks.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43986

By:

Arnebold, Andre;
Wellmann, Stefanie;
Hartwig, Andreas

Publication type:

Article

Adhesive and viscoelastic performance of surface functionalized nano-Fe3O4 induced orientated ethylene vinyl-acetate composite hot melt adhesives.

Published in:

Journal of Applied Polymer Science, 2016, v. 133, n. 38, p. n/a, doi. 10.1002/app.43931

By:

He, Xianru;
Lu, Xiaobin;
Chen, Qian;
Zhang, Rui

Publication type:

Article

Works matching IS 00218995 AND DT 2016 AND VI 133 AND IP 38

Influence of a rigid polystyrene block on the free volume and ionic conductivity of a gel polymer electrolyte based on poly(methyl methacrylate)- block-polystyrene.

Understanding of intermolecular interaction in PVDF/PTW blends: Crystallization behavior, thermal, and dynamic mechanical properties.

Preparation and swelling behavior of moisture-absorbing polyurethane films impregnated with superabsorbent sodium polyacrylate particles.

Sequential liquefaction of Nicotiana tabacum stems biomass by crude polyhydric alcohols for the production of polyols and rigid polyurethane foams.

Conducting epoxy networks modified with non-covalently functionalized multi-walled carbon nanotube with imidazolium-based ionic liquid.

Synthesis and mechanical properties of high impact polystyrene with in situ bulk polymerization toughened by one-pot Nd-based styrene-isoprene-butadiene terpolymer rubber.

Electropolymerization of aniline in phosphonium-based ionic liquids and their application as protective films against corrosion.

Hybrid organosiloxane coatings containing epoxide precursors for protecting mild steel against corrosion in a saline medium.

Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials.

Editorial Board, Aims & Scope, Table of Contents.

Cover Image, Volume 133, Issue 38.

Morphology and mechanical properties of natural rubber latex films modified by exfoliated Na-montmorillonite/polyethyleneimine- g-poly (methyl methacrylate) nanocomposites.

Numerical investigation of spinneret geometric effect on spinning dynamics of dry-jet wet-spinning of cellulose/[BMIM]Cl solution.

Producing high-quality precursor polymer and fibers to achieve theoretical strength in carbon fibers: A review.

A pre-polyaddition mediation of castor oil for polyurethane formation.

Development of lignin carbon fibers: Evaluation of the carbonization process.

Chemorheological time-temperature-transformation-viscosity diagram: Foamed EPDM rubber compound.

Novel polyurea polymers with enhanced mechanical properties.

Viscoelastic properties of borax loaded CMC- g- cl-poly(AAm) hydrogel composites and their boron nutrient release behavior.

Simultaneous measurement of the molecular weight distribution and 5-ethylidene-2-norbornene content across the molecular weight distribution of ethylene-propylene-diene terpolymer via a new size exclusion chromatography-ultraviolet-refractive index method

Removal of Pb<sup>2+</sup> and Cd<sup>2+</sup> from drinking water using polysaccharide extract isolated from cactus pads ( Opuntia ficus indica).

The suitable itaconic acid content in polyacrylonitrile copolymers used for PAN-based carbon fibers.

Microstructural, wetting, and dielectric properties of plasma polymerized polypyrrole thin films.

Polypropylene/polystyrene blends prepared by diffusion and subsequent polymerization in polypropylene pellets after injection molding.

Influence of cure conditions on out-of-autoclave bismaleimide composite laminates.

Covalent integration of differently structured polyester polyols improves the toughness and strength of cationically polymerized, amorphous epoxy networks.

Adhesive and viscoelastic performance of surface functionalized nano-Fe<sub>3</sub>O<sub>4</sub> induced orientated ethylene vinyl-acetate composite hot melt adhesives.