Works matching IS 00218995 AND DT 2010 AND VI 118 AND IP 6

Results: 75

Organic‐soluble chitosan/polyhydroxybutyrate ultrafine fibers as skin regeneration prepared by electrospinning.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3619, doi. 10.1002/app.32671

By:

Guiping Ma;
Dongzhi Yang;
Kemin Wang;
Jing Han;
Shumin Ding;
Guoqiang Song;
Jun Nie

Publication type:

Article

Preparation of shish‐kebab and nanofiber polyethylene with chromium/Santa Barbara amorphous silica‐15 catalysts.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3658, doi. 10.1002/app.32583

By:

Ebrahim Ahmadi;
Mehdi Nekoomanesh Haghighi;
Zahra Mohamadnia;
Ali Ramazani

Publication type:

Article

Effect of silica on viscosity, tack, and shear strength of epoxidized natural rubber‐based pressure‐sensitive adhesives in the presence of coumarone‐indene resin.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3439, doi. 10.1002/app.32686

By:

Imran Khan;
B. T. Poh

Publication type:

Article

Terminal‐specific PEGylation of polypeptides in a dilute solution.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3269, doi. 10.1002/app.32709

By:

Jun Jim Wu;
Henry T. Peng;
Pang N. Shek

Publication type:

Article

Novel polymeric flocculants based on polyacrylamide grafted dextran in kaolin suspension.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3539, doi. 10.1002/app.32716

By:

S. Krishnamoorthi;
P. Adhikary;
D. Mal;
R. P. Singh

Publication type:

Article

Chemical modification of Bombyx morisilk with calcium‐salt treatment and subsequent glycerin triglycidyl ether crosslinking.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3260, doi. 10.1002/app.32631

By:

Jianxin He;
Guoxin Jia;
Shizhong Cui;
Shanyuan Wang;
Yaying Gao

Publication type:

Article

Morphology, thermal and mechanical properties of the polyhedral oligomeric silsesquioxane side‐chain epoxy hybrid material.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3723, doi. 10.1002/app.32752

By:

Yie‐Chan Chiu;
I‐Chen Chou;
Hsieh‐Chih Tsai;
Linawati Riang;
Chen‐Chi M. Ma

Publication type:

Article

Sorption of uranyl ions from aqueous solutions using crosslinked maleic anhydride‐octene‐styrene terpolymer.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3570, doi. 10.1002/app.32734

By:

E. O. Akperov;
A. M. Maharramov;
O. G. Akperov

Publication type:

Article

Compatibilization of poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 blends with styrene–maleic anhydride copolymer: Mechanical properties, morphology, crystallization, and melting behavior.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3545, doi. 10.1002/app.32730

By:

Shuai Wang;
Bo Li;
Yong Zhang

Publication type:

Article

Polymerization of epoxidized soybean oil with maleinized soybean oil and maleic anhydride grafted polypropylene mixtures.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3311, doi. 10.1002/app.32155

By:

Cem Öztürk;
Selim H. Küsefoğlu

Publication type:

Article

Amphiphilic diblock copolymers poly(2‐hydroxyethylmethacrylate)‐b‐(N‐phenylmaleimide) and poly(2‐hydroxyethylmethacrylate)‐b‐(styrene) using the macroinitiator poly(HEMA)‐Cl by ATRP: Preparation, characterization, and thermal properties

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3649, doi. 10.1002/app.32353

By:

Guadalupe del C. Pizarro;
Oscar G. Marambio;
Manuel Jeria‐Orell;
Mario E. Flores;
Bernabé L. Rivas

Publication type:

Article

Examining the use of TiO2to enhance the NH3sensitivity of polypyrrole films.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3351, doi. 10.1002/app.32382

By:

Yan Wu;
Shuangxi Xing;
Jiacai Fu

Publication type:

Article

Annealing and ultraviolet treatment of plasma fluorocarbon films for enhanced cohesion and stability.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3176, doi. 10.1002/app.32621

By:

P. Chevallier;
S. Holvoet;
S. Turgeon;
P. Horny;
J. J. Pireaux;
D. Mantovani

Publication type:

Article

Influence of processing conditions and physicochemical interactions on morphology and fracture behavior of a clay/thermoplastic/thermosetting ternary blend.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3632, doi. 10.1002/app.32405

By:

M. Hernandez;
J. Duchet‐Rumeau;
H. Sautereau

Publication type:

Article

Analysis of the structure and mass transport properties of clay nanocomposites based on amorphous PET.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3666, doi. 10.1002/app.32401

By:

A. Greco;
C. Esposito Corcione;
A. Strafella;
A. Maffezzoli

Publication type:

Article

Properties of compression‐molded plates made from wood powders impregnated with liquefied wood‐based novolak‐type phenol‐formaldehyde resins.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3471, doi. 10.1002/app.32698

By:

Wen‐Jau Lee;
Yun‐Hsuan Wu;
Chiou‐Chang Wu;
Kuo‐Chun Chang;
I‐Min Tseng

Publication type:

Article

Effect of poly(epichlorohydrin) on the thermal and mechanical properties of poly(vinyl chloride).

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3416, doi. 10.1002/app.32687

By:

Yiming Ren;
Guangfeng Wu;
Xiaoxing Zhao;
Xiaoli Liu;
Fengqi Liu

Publication type:

Article

Synthesis and characterization of chitosan‐polycaprolactone blended with organoclay for control release of doxycycline.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3167, doi. 10.1002/app.32474

By:

Sarmila Sahoo;
Abhisek Sasmal;
Debasish Sahoo;
Padmalochan Nayak

Publication type:

Article

Amphiphilic PEG‐based ether‐anhydride terpolymers: Synthesis, characterization, and micellization.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3576, doi. 10.1002/app.32724

By:

Aijun Zhao;
Qi Zhou;
Tao Chen;
Jie Weng;
Shaobing Zhou

Publication type:

Article

Preparation and antimicrobial activity of Konjac Glucomannan modified with quaternary ammonium compound.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3453, doi. 10.1002/app.32690

By:

Wanxue Lei;
Qinhuan Yang;
Xingang Jia;
Tingyou Zhang

Publication type:

Article

Isothermal crystallization kinetics and crystal structure of poly(lactic acid): Effect of triphenyl phosphate and talc.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3558, doi. 10.1002/app.32728

By:

H. W. Xiao;
Peng Li;
Xiaomin Ren;
Tao Jiang;
Jen‐Taut Yeh

Publication type:

Article

Well‐defined diblock and triblock copolymers for KrF lithography.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3245, doi. 10.1002/app.32610

By:

Ting‐Yu Lee;
Yi‐Jen Lin;
Chao‐Ying Yu;
Jui‐Fa Chang

Publication type:

Article

Coextruded polyethylene and wood‐flour composite: Effect of shell thickness, wood loading, and core quality.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3594, doi. 10.1002/app.32742

By:

Fei Yao;
Qinglin Wu

Publication type:

Article

Evaluation effects of biobased plasticizer on the thermal, mechanical, dynamical mechanical properties, and permanence of plasticized PVC.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3499, doi. 10.1002/app.32713

By:

Mohamed Tahar Benaniba;
Valérie Massardier‐Nageotte

Publication type:

Article

Gellan–adipic acid blends crosslinked by means of a dehydrothermal treatment.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3131, doi. 10.1002/app.32277

By:

Niccoletta Barbani;
Maria Laura Coluccio;
Caterina Cristallini;
Giulio D. Guerra;
Elisabetta Rosellini

Publication type:

Article

Preparation and characterization of ABS/HIPS heterogeneous anion exchange membrane filled with activated carbon.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3371, doi. 10.1002/app.32369

By:

S. M. Hosseini;
S. S. Madaeni;
A. R. Khodabakhshi

Publication type:

Article

Surface activity and micellar behavior of dimethylamino‐ and trimethylammonium‐ tipped oxyethylene–oxybutylene diblock copolymers in aqueous media.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3324, doi. 10.1002/app.32226

By:

Abbas Khan;
Mohammad Siddiq

Publication type:

Article

Macroporous crosslinked hydrophobic/hydrophilic polystyrene/polyamide interpenetrating polymer network: Synthesis, characterization, and adsorption behaviors for quercetin from aqueous solution.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3643, doi. 10.1002/app.32479

By:

Wenwen Liao;
Shuqin Gao;
Xianglin Xie;
Mancai Xu

Publication type:

Article

Studies on curing kinetics and thermal behavior of phosphorylated epoxy resin in the presence of aromatic amide‐amines.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3612, doi. 10.1002/app.30073

By:

Geeta Durga;
Parveen Kukreja;
A. K. Narula

Publication type:

Article

Crosslinked sulfonated poly(arylene ether ketone) with pendant carboxylic acid group via poly(ethylene glycol) for proton exchange membrane.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3318, doi. 10.1002/app.32439

By:

Zhiliang Li;
Xincai Liu;
Danming Chao;
Xiaofeng Lu;
Libing He;
Yang Yang;
Wanjin Zhang

Publication type:

Article

Thermal and dielectric properties of the aluminum particle/epoxy resin composites.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3156, doi. 10.1002/app.32442

By:

Wenying Zhou;
Demei Yu

Publication type:

Article

A new ionic liquids‐based monolithic column for determination of caffeine and theophylline.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3425, doi. 10.1002/app.32684

By:

Tao Zhu;
Wentao Bi;
Kyung Ho Row

Publication type:

Article

Highly purified natural rubber by saponificaion of latex: Analysis of green and cured properties.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3524

By:

Sureerut Amnuaypornsri;
Jitladda Sakdapipanich;
Yasuyuki Tanaka

Publication type:

Article

Construct biomimetic giant vesicles via self‐assembly of poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L‐lactide).

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3197, doi. 10.1002/app.32758

By:

Gongyan Liu;
Xiaofen Hu;
Chaojian Chen;
Jian Ji

Publication type:

Article

Tailoring surface properties of cellulose acetate membranes by low‐pressure plasma processing.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3227, doi. 10.1002/app.32604

By:

Chun Huang;
Ching‐Yuan Tsai;
Ruey‐Shin Juang;
Hsiang‐Chien Kao

Publication type:

Article

In‐line analysis of the influence of monomeric and oligomeric hindered amine on the hydrolysis of polycarbonate in a PC/ABS blend.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3532, doi. 10.1002/app.32714

By:

Vipin V. Rajan;
Bernd Steinhoff;
Ingo Alig;
Roy Wäber;
Jürgen Wieser

Publication type:

Article

Novel bioactive scaffolds with fibronectin recognition nanosites based on molecular imprinting technology.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3236, doi. 10.1002/app.32622

By:

Elisabetta Rosellini;
Niccoletta Barbani;
Paolo Giusti;
Gianluca Ciardelli;
Caterina Cristallini

Publication type:

Article

Biobased composite resins design for electronic materials.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3274, doi. 10.1002/app.32633

By:

Mingjiang Zhan;
Richard P. Wool

Publication type:

Article

Development of novel polymeric materials for agroprocess intensification.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3292, doi. 10.1002/app.32640

By:

D. R. Burke;
G. Akay;
P. E. Bilsborrow

Publication type:

Article

Composite boards from isocyanate bonded pine needles.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3477, doi. 10.1002/app.32703

By:

M. Gupta;
Monika Chauhan;
Naseeba Khatoon;
B. Singh

Publication type:

Article

Effect of prepolyurethane on the performances of poly(acrylates‐co‐urethane) copolymer.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3203, doi. 10.1002/app.32761

By:

Minrui Li;
Zhen Zheng;
Shujuan Liu;
Wei Wei;
Xinling Wang

Publication type:

Article

Radiation processing and characterization of poly(vinyl alcohol) nano‐composites, Part 1: Nano‐particulate filler tuned crosslinking behavior.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3490, doi. 10.1002/app.32710

By:

Kumar A. Dubey;
Chandrasekhar V. Chaudhari;
Rekha Rao;
Yatender K. Bhardwaj;
Narender K. Goel;
Sunil Sabharwal

Publication type:

Article

Comparison of poly(o‐anisidine) and poly(o‐anisidine‐co‐aniline) copolymer synthesized by chemical oxidative method.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3123, doi. 10.1002/app.32157

By:

J. Longun;
B. Buschle;
N. Nguyen;
M. Lo;
J. O. Iroh

Publication type:

Article

Fabrication and characterization of zein/viscose textibe fibers.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3364, doi. 10.1002/app.32359

By:

Fei Chi;
Hongzhang Chen

Publication type:

Article

Nanoparticle effects on the morphology and mechanical properties of polypropylene spunbond webs.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3141, doi. 10.1002/app.32304

By:

Raghavendra R. Hegde;
Gajanan S. Bhat

Publication type:

Article

Physical properties of new polyurethanes foams from benzene polyols synthesized from erucic acid.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3211, doi. 10.1002/app.32542

By:

Marie‐Josée Dumont;
Suresh S. Narine

Publication type:

Article

Synthesis and characterization of alginate‐g‐vinyl sulfonic acid with a potassium peroxydiphosphate/thiourea system.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3685, doi. 10.1002/app.32447

By:

Arpit Sand;
Mithilesh Yadav;
Kunj Behari

Publication type:

Article

Synthesis of perfluorohexyl‐terminated poly(ethylene oxide) using maghnite‐h as clay catalyst.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3445, doi. 10.1002/app.32689

By:

Aïcha Hachemaoui;
Ahmed Yahiaoui;
Mohammed Belbachir

Publication type:

Article

Thermogelling of highly branched poly(N‐isopropylacrylamide).

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3391, doi. 10.1002/app.32410

By:

Wei Tao;
Lifeng Yan

Publication type:

Article

Preparation of microporous PVDF membrane via tips method using binary diluent of DPK and PG.

Published in:

Journal of Applied Polymer Science, 2010, v. 118, n. 6, p. 3518, doi. 10.1002/app.32696

By:

Yuanhui Tang;
Yakai Lin;
Wenzhong Ma;
Ye Tian;
Jian Yang;
Xiaolin Wang

Publication type:

Article