Works matching IS 00218995 AND DT 2009 AND VI 112 AND IP 6
Results: 76
Free-radical solution copolymerization of the ionic liquid monomer 1-vinyl-3-ethylimidazolium bromide with acrylonitrile.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3337, doi. 10.1002/app.29598
- By:
- Publication type:
- Article
Novel dibenzocycloheptenyl phosphonium salts as thermolatent initiator in cationic polymerization.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3707, doi. 10.1002/app.29518
- By:
- Publication type:
- Article
Solid state mechano-chemical grafting copolymerization of hydroxyethyl cellulose with acrylic acid.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3537, doi. 10.1002/app.30098
- By:
- Publication type:
- Article
Finite difference solution for radiative-conductive heat transfer of a semitransparent polycarbonate layer.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3313, doi. 10.1002/app.29356
- By:
- Publication type:
- Article
Fluoroalkyl end-capped oligomer possessing a nonflammable characteristic in silica gel matrices even at 800°C under atmospheric conditions.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3482, doi. 10.1002/app.29942
- By:
- Publication type:
- Article
Mineral filler reinforcement for commingled recycled-plastic materials.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3470, doi. 10.1002/app.29861
- By:
- Publication type:
- Article
Studies on the phase structure, mechanical, rheological properties, and nonisothermal crystallization kinetics of the PEN/SCF composites.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3462, doi. 10.1002/app.29854
- By:
- Publication type:
- Article
The interchange reaction between poly(ethylene terephthalate) and poly( m-xylylene adipamide).
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3449, doi. 10.1002/app.29825
- By:
- Publication type:
- Article
Preparation and characterization of scratch and mar resistant waterborne epoxy/silica nanocomposite clearcoat.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3634, doi. 10.1002/app.29865
- By:
- Publication type:
- Article
Modification of cellulose acetate fabric with cyclodextrin to improve its dyeability.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3192, doi. 10.1002/app.29630
- By:
- Publication type:
- Article
Synthesis, characterization, and fluorescence properties of lanthanide complexes with poly(styrene- co-methacrylic acid).
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3388, doi. 10.1002/app.29744
- By:
- Publication type:
- Article
Characteristic role of crosslinker on thermally induced volumetric contraction-expansion processes in poly(N-isopropylacrylamide) networks and water systems.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3177, doi. 10.1002/app.29670
- By:
- Publication type:
- Article
Surface modification of polypropylene microporous membrane by grafting acrylic acid using physisorbed initiators method.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3728, doi. 10.1002/app.29681
- By:
- Publication type:
- Article
Modification of polypropylene and polypropylene/ fibrous cellulose composites by the addition of poly(ethylene oxide).
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3362, doi. 10.1002/app.29623
- By:
- Publication type:
- Article
The effect of composition on the dynamic and mechanical properties of natural rubber-poly(methylmethacrylate) blends.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3217, doi. 10.1002/app.29737
- By:
- Publication type:
- Article
Mechanical properties and biomass carbon ratios of poly(butylene succinate) composites filled with starch and cellulose filler using furfural as plasticizer.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3410, doi. 10.1002/app.29777
- By:
- Publication type:
- Article
Synthesis and properties of sulfonated poly(siloxane imide)s bearing dimethyl siloxane oligomers for fuel cell applications.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3560, doi. 10.1002/app.29593
- By:
- Publication type:
- Article
Effects of artificial weathering on the mechanical properties of paper-based materials consolidated with polymeric materials.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3529, doi. 10.1002/app.30109
- By:
- Publication type:
- Article
Influence of processing conditions in small-scale melt mixing and compression molding on the resistivity and morphology of polycarbonate-MWNT composites.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3494, doi. 10.1002/app.29930
- By:
- Publication type:
- Article
Studying the degradation of polyhydroxybutyrate- co-valerate during processing with clay-based nanofillers.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3669, doi. 10.1002/app.29945
- By:
- Publication type:
- Article
Crosslink density and diffusion mechanisms in blend vulcanizates loaded with carbon black and paraffin wax.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3232, doi. 10.1002/app.29871
- By:
- Publication type:
- Article
Electropolymerization of o-phenylenediamine on Pt-electrode from aqueous acidic solution: Kinetic, mechanism, electrochemical studies and characterization of the polymer obtained.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3695, doi. 10.1002/app.29802
- By:
- Publication type:
- Article
Comparison of fibroblast and nerve cells response on plasma treated poly ( L-lactide) surface.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3429, doi. 10.1002/app.29813
- By:
- Publication type:
- Article
Model prediction of the ESCR of semicrystalline polyethylene: Effects of melt cooling rate.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3249, doi. 10.1002/app.29893
- By:
- Publication type:
- Article
Adsorptive removal of methylene blue from simulated dyeing wastewater with melamine-formaldehyde-urea resin.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3442, doi. 10.1002/app.29835
- By:
- Publication type:
- Article
A simple approach to prepare PMA/TiO<sub>2</sub> composite: The homogeneous dispersion of nano TiO<sub>2</sub> in maleic anhydride polymer matrix.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3582, doi. 10.1002/app.29703
- By:
- Publication type:
- Article
Polybenzimidazole (PBI) molecular weight and Mark-Houwink equation.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3436, doi. 10.1002/app.29817
- By:
- Publication type:
- Article
Synthesis and properties of homogeneously dispersed polyamide 6/MWNTs nanocomposites via simultaneous in situ anionic ring-opening polymerization and compatibilization.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3620, doi. 10.1002/app.29783
- By:
- Publication type:
- Article
Conductivity and mechanical properties of composites based on MWCNTs and styrene-butadiene-styrene block™ copolymers.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3241, doi. 10.1002/app.29897
- By:
- Publication type:
- Article
Transferring polypropylene into carbon nanotubes via combustion of PP/zeolites (H-ZSM-5 or H-beta)/Ni<sub>2</sub>O<sub>3</sub>.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3423, doi. 10.1002/app.29754
- By:
- Publication type:
- Article
Synthesis and characterization of highly soluble poly(ether imide)s containing indane moieties in the main chain.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3640, doi. 10.1002/app.29868
- By:
- Publication type:
- Article
Synthesis and characterization of novel oligomeric poly(styrene- co-acrylonitrile)-clay complexes.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3355, doi. 10.1002/app.29622
- By:
- Publication type:
- Article
Effects of chain lengths, molecular orientation, and functional groups of thiols adsorbed onto CF surface on interfacial properties of CF/epoxy composites.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3380, doi. 10.1002/app.29707
- By:
- Publication type:
- Article
Thermostimulative shape-memory effect of reactive compatibilized high-density polyethylene/poly(ethylene terephthalate) blends by an ethylene-butyl acrylate-glycidyl methacrylate terpolymer.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3341, doi. 10.1002/app.29530
- By:
- Publication type:
- Article
The physical and mechanical properties of polyurethanes from oleic acid polyols.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3554, doi. 10.1002/app.29758
- By:
- Publication type:
- Article
Modeling the displacement in three-layer electroactive polymers using different counter-ions by a phase transformation approach.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3284, doi. 10.1002/app.29684
- By:
- Publication type:
- Article
Bismaleimide-modified methyl-di(phenylethynyl)silane blends and composites: Cure characteristics, thermal stability, and mechanical property.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3721, doi. 10.1002/app.29541
- By:
- Publication type:
- Article
Synthesis and characterization of novel polyglycerol hydrogels containing L-lactic acid groups as pendant acidic substituents: pH-Responsive polyglycerol-based hydrogels.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3209, doi. 10.1002/app.29666
- By:
- Publication type:
- Article
Thermal properties of hexadecane encapsulated in poly(divinylbenzene) particles.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3257, doi. 10.1002/app.29648
- By:
- Publication type:
- Article
Novel peroxide-vulcanized NBR-PAni.DBSA blends, part 1: Preparation and characterization.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3199, doi. 10.1002/app.29619
- By:
- Publication type:
- Article
Synthesis and characterization of unsaturated polyesters based on the aminolysis of poly(ethylene terephthalate).
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3327, doi. 10.1002/app.29527
- By:
- Publication type:
- Article
Strontium aluminate/polymer composites: Morphology, luminescent properties, and durability.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3347, doi. 10.1002/app.29933
- By:
- Publication type:
- Article
Poly(vinyl alcohol) nanocomposites with sepiolite and heat-treated sepiolites.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3764, doi. 10.1002/app.29830
- By:
- Publication type:
- Article
Relationship of polymorphic crystalline phase texture to strain recovery and stiffness of a propylene-based elastomer.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3736, doi. 10.1002/app.29823
- By:
- Publication type:
- Article
Modification of epoxy resins via m-chloroperbenzoic acid-epoxidized carbon nanotubes.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3322, doi. 10.1002/app.29834
- By:
- Publication type:
- Article
Batteries and a pinch of salt: A simple toolkit for the production of poly(methylsilyne).
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3519, doi. 10.1002/app.29948
- By:
- Publication type:
- Article
Preparation and anti-TMV activity of guanidinylated chitosan hydrochloride.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3522, doi. 10.1002/app.29959
- By:
- Publication type:
- Article
Polypropylene/natural rubber thermoplastic elastomer: Effect of phenolic resin as a vulcanizing agent on mechanical properties and morphology.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3267, doi. 10.1002/app.29816
- By:
- Publication type:
- Article
Influence of the rubber blend ratio on blowout behaviors of carbon black-reinforced natural rubber/styrene-butadiene rubber.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3627, doi. 10.1002/app.29793
- By:
- Publication type:
- Article
Synthesis of highly improved Ziegler-Natta catalyst.
- Published in:
- Journal of Applied Polymer Science, 2009, v. 112, n. 6, p. 3663, doi. 10.1002/app.29786
- By:
- Publication type:
- Article