Works matching IS 00218995 AND DT 2007 AND VI 105 AND IP 6

Results: 87

In vitro monitoring of surface mechanical properties of poly(L‐lactic acid) using microhardness.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3860

By:

C. Saiz‐Arroyo;
Y. Wang;
M. A. Rodriguez‐Perez;
N. M. Alves;
J. F. Mano

Publication type:

Article

Side chain functionality dominated the chromatography of N‐protected amino acid on molecularly imprinted polymer.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3519, doi. 10.1002/app.26621

By:

Yu‐Chi Lin;
Hsin‐Hung Pan;
Ching‐Chiang Hwang;
Wen‐Chien Lee

Publication type:

Article

Morphology, deformation behavior and thermomechanical properties of polypropylene/maleic anhydride grafted polypropylene/layered silicate nanocomposites.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3836, doi. 10.1002/app.26665

By:

I. L. Dubnikova;
S. M. Berezina;
Yu. M. Korolev;
G.‐M. Kim;
S. M. Lomakin

Publication type:

Article

Transparent antifouling coatings via nanoencapsulation of a biocideThis work was performed at the University of New Hampshire.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3826, doi. 10.1002/app.26659

By:

M. Zhang;
E. Cabane;
J. Claverie

Publication type:

Article

A water‐soluble supramolecular‐structured photoinitiator between methylated β‐cyclodextrin and 2,2‐dimethoxy‐2‐phenylacetophenone.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3819, doi. 10.1002/app.26634

By:

Yuanlong Wang;
Xuesong Jiang;
Jie Yin

Publication type:

Article

Reswelling transition of poly(sodium acrylate) gels due to destruction of hydrogen bonds observed by ATR FTIR spectroscopy.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3811, doi. 10.1002/app.26626

By:

Hiroaki Sato;
Yumiko Hirashima;
Atsushi Suzuki

Publication type:

Article

Mechanical properties and microstructure of acrylonitrile–butadiene rubber vulcanizates reinforced by in situ polymerized phenolic resin.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3853, doi. 10.1002/app.26678

By:

Linzhong Ye;
Yongheng Zhang;
Zhaobo Wang

Publication type:

Article

Thermal conductivity models for carbon/liquid crystal polymer composites.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3309, doi. 10.1002/app.26607

By:

Jason M. Keith;
Julia A. King;
Kara M. Lenhart;
Bridget Zimny

Publication type:

Article

Etherification of hemicelluloses from sugarcane bagasse.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3301, doi. 10.1002/app.26606

By:

Jui‐Li Ren;
Run‐Cang Sun;
Chan‐Fu Liu

Publication type:

Article

Thermal decomposition of copolymers used in dental resins formulations photocured by ultra blue IS.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3295, doi. 10.1002/app.26598

By:

Isabel C. Rigoli;
Carla C. S. Cavalheiro;
Miguel G. Neumann;
Éder T. G. Cavalheiro

Publication type:

Article

The pH‐dependent surface properties of gelatin‐alkenylsuccinic acid anhydride derived surfactants.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3371, doi. 10.1002/app.26597

By:

Li‐Huei Lin;
Keng‐Ming Chen;
Chee‐Chan Wang

Publication type:

Article

Curing and thermal behavior of DGEBA in presence of dianhydrides and aromatic diamine.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3804, doi. 10.1002/app.26620

By:

Ritu Jain;
Veena Choudhary;
A. K. Narula

Publication type:

Article

Fracture surface morphology in thermosets modified with hollow microspheres.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3287, doi. 10.1002/app.26596

By:

Ho Sung Kim

Publication type:

Article

Estimation of phase diagrams for copolymer‐diluent systems in thermally induced phase separation.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3513, doi. 10.1002/app.26617

By:

Rui Lv;
Jing Zhou;
Peng Xu;
Qiangguo Du;
Haitao Wang;
Wei Zhong

Publication type:

Article

Synthesis and properties of hydrogen‐bonded poly(amide‐imide) hybrid films.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3689, doi. 10.1002/app.26616

By:

Mei‐Hui Tsai;
Shih‐Liang Huang;
J. C. Muti Lin;
Cheng‐Jung Ko;
Ying‐Ling Chen;
Chun‐Mei Lu;
Chiou‐Juy Chen;
Chia‐Hui Yen

Publication type:

Article

Flame retarding glass fibers reinforced polyamide 6 by melamine polyphosphate/polyurethane‐encapsulated solid acid.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3317, doi. 10.1002/app.26611

By:

Zhang‐Yu Wang;
Zhi‐Qiang Feng;
Yuan Liu;
Qi Wang

Publication type:

Article

Synthesis and characterization of functionalized triblock polymer: The prepared polymer is cholesteryl terminated and chain‐extended PCL.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3505, doi. 10.1002/app.26609

By:

Jinbao Guo;
Jie Sun;
Hui Cao;
Dongyu Zhao;
Huai Yang

Publication type:

Article

Structure control of polyphenylene sulfide membrane prepared by thermally induced phase separation.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3280, doi. 10.1002/app.26595

By:

Huaiyu Ding;
Qiang Zhang;
Fuming Wang;
Ye Tian;
Lihua Wang;
Yanqiao Shi;
Biqian Liu

Publication type:

Article

Effect of cavitation on the plastic deformation and failure of isotactic polypropylene.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3274, doi. 10.1002/app.26594

By:

Bing Na;
Ruihua Lv

Publication type:

Article

Effect of an organic dicarboxylic acid salt on fractionated crystallization of polypropylene droplets.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3260, doi. 10.1002/app.26584

By:

Y. Jin;
A. Hiltner;
E. Baer

Publication type:

Article

Application of Fourier transform infrared spectroscopy to study the interactions of poly(acrylic acid) and mixtures of poly(acrylic acid) and polyacrylamide with bone powders and hydroxyapatites.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3228, doi. 10.1002/app.26581

By:

M. A. Moharram;
Mousa A. Allam

Publication type:

Article

Pressure distribution analysis of fiber reinforced plastic components made by rubber pressure moulding technique.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3333, doi. 10.1002/app.26565

By:

Kamal K. Kar;
S. D. Sharma;
P. Kumar;
J. Ramkumar;
R. K. Appaji;
K. R. N. Reddy

Publication type:

Article

Comparison of the influence of different compatibilizers on the structure and properties of ethylene vinyl acetate copolymer/modified clay nanocomposites.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3612, doi. 10.1002/app.26532

By:

B. R. Guduri;
A. S. Luyt

Publication type:

Article

Polyethylene glycol and polyvinyl alcohol as corrosion inhibitors for aluminium in acidic medium.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3363, doi. 10.1002/app.26530

By:

S. A. Umoren;
O. Ogbobe;
P. C. Okafor;
E. E. Ebenso

Publication type:

Article

Degradation behavior of polyoxymethylene: Influence of different stabilizer packages.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3679, doi. 10.1002/app.26524

By:

V.‐M. Archodoulaki;
S. Lüftl;
S. Seidler

Publication type:

Article

Preparation of ultrahigh‐molecular‐weight polyethylene membranes via a thermally induced phase‐separation method.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3355, doi. 10.1002/app.26521

By:

Huaiyu Ding;
Ye Tian;
Lihua Wang;
Biqian Liu

Publication type:

Article

Effects of ion group content and polyol molecular weight on physical properties of HTPB‐based waterborne poly(urethane‐urea)s.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3796, doi. 10.1002/app.26512

By:

Shih Min Huang;
Teng Ko Chen

Publication type:

Article

Effect of blending high‐pressure low‐density polyethylene on the crystallization kinetics of linear low‐density polyethylene.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3673, doi. 10.1002/app.26504

By:

Jiameng Kathy Liu;
Yoshinobu Nozue;
Tatsuhiro Nagamatsu;
Satoru Hosoda

Publication type:

Article

Banded spherulites in poly(L‐lactic acid): Effects of the crystallization temperature and molecular weight.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3500, doi. 10.1002/app.26494

By:

Yaming Wang;
João F. Mano

Publication type:

Article

Vulcanization kinetics of low‐protein natural rubber with use of a vulcameter.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3255, doi. 10.1002/app.26488

By:

Ping‐Yue Wang;
Ying Chen;
Hong‐Lian Qian

Publication type:

Article

All‐trans retinoic acid release from polyion‐complex micelles of methoxy poly(ethylene glycol) grafted chitosan.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3246, doi. 10.1002/app.26480

By:

Dong‐Gon Kim;
Young‐Il Jeong;
Jae‐Woon Nah

Publication type:

Article

Preparation of poly(methyl methacrylate) nanocomposites with superior impact strength.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3183, doi. 10.1002/app.26478

By:

Dhananjay Singh;
T. Jayasimha;
K. N. Rai;
Anil Kumar

Publication type:

Article

Comparative photo‐oxidation under natural and accelerated conditions of polypropylene nanocomposites produced by extrusion and injection molding.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3789, doi. 10.1002/app.26459

By:

M. Diagne;
M. Guèye;
A. Dasilva;
A. Tidjani

Publication type:

Article

Synthesis of monomethoxy poly(ethylene glycol) without diol poly(ethylene glycol).

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3782, doi. 10.1002/app.26457

By:

Jing Zhang;
Yong‐Jiang Zhao;
Zhi‐Guo Su;
Guang‐Hui Ma

Publication type:

Article

Preparation and characterization of TiO2 and polymer nanocomposite films with high refractive index.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3662, doi. 10.1002/app.26451

By:

Norio Nakayama;
Toyoharu Hayashi

Publication type:

Article

pH‐sensitive swelling and release behaviors of anionic hydrogels for intelligent drug delivery system.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3656, doi. 10.1002/app.26450

By:

Bumsang Kim;
Youngchan Shin

Publication type:

Article

Effect of adding sulphur to the dope on properties of modified polyacrylonitrile fibers.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3774, doi. 10.1002/app.26449

By:

Yan‐Xiang Wang;
Cheng‐Guo Wang

Publication type:

Article

Morphological analysis of highly filled propylene/ethylene copolymers.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3758

By:

L. L. Ionescu‐Vasii;
Paula M. Wood‐Adams;
Eric Duchesne;
Gilles L'Espérance;
Teresa Karjala;
Patricia Ansems

Publication type:

Article

Novel high‐dielectric‐permittivity poly(vinylidene fluoride)/polypropylene blend composites: The influence of the poly(vinylidene fluoride) concentration and compatibilizer.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3649, doi. 10.1002/app.26447

By:

Zhi‐Min Dang;
Wei‐Tao Yan;
Hai‐Ping Xu

Publication type:

Article

Pervaporation characteristics and structure of poly(vinyl alcohol)/poly(ethylene glycol)/tetraethoxysilane hybrid membranes.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3640, doi. 10.1002/app.26446

By:

Li Yi Ye;
Qing Lin Liu;
Qiu Gen Zhang;
Ai Mei Zhu;
Guo Bo Zhou

Publication type:

Article

Development of flame retardancy properties of new halogen‐free phosphorous doped SiO2 thin films on fabrics.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3748, doi. 10.1002/app.26442

By:

Aysun Cireli;
Nurhan Onar;
M. Faruk Ebeoglugil;
Isil Kayatekin;
Bengi Kutlu;
Osman Culha;
Erdal Celik

Publication type:

Article

Synthesis and characterization of cationic guar gum: A high performance flocculating agent.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3240, doi. 10.1002/app.26440

By:

Sagar Pal;
D. Mal;
R. P. Singh

Publication type:

Article

Characterization of liquefied wood residues from different liquefaction conditions.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3740, doi. 10.1002/app.26435

By:

Hui Pan;
Todd F. Shupe;
Chung‐Yun Hse

Publication type:

Article

Adhesion properties of swollen hydrogels evaluated by a point‐contact method.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3729, doi. 10.1002/app.26434

By:

Atsushi Suzuki;
Takaya Sato;
Daisuke Sakasegawa;
Hidenori Sawada;
Motoaki Goto

Publication type:

Article

Fiber and web formation of melt‐blown thermoplastic polyurethane polymers.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3724, doi. 10.1002/app.26432

By:

Youn Eung Lee;
Larry C. Wadsworth

Publication type:

Article

Host–guest phenomena in polystyrene networks.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3602, doi. 10.1002/app.26430

By:

Mary Joseph;
Tessymol Mathew;
Kochurani George;
Thomas V. Mathew;
Sunny Kuriakose

Publication type:

Article

Synthesis of high‐molecular‐weight poly(lactic acid) from aqueous lactic acid cocatalyzed by ε‐caprolactam and tin(II) chloride dihydrate.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3597, doi. 10.1002/app.26427

By:

Zi‐Qiang Lei;
Shou‐Feng Wang;
Yan‐Bin Bai

Publication type:

Article

Evaluation of the reinforcing effect of ground wood pulp in the preparation of polypropylene‐based composites coupled with maleic anhydride grafted polypropylene.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3588

By:

J. A. Méndez;
F. Vilaseca;
M. A. Pèlach;
J. P. López;
L. Barberà;
X. Turon;
J. Gironès;
P. Mutjé

Publication type:

Article

Functionalization of industrial polypropylene films via the swift‐heavy‐ion‐induced grafting of glycidyl methacrylate.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3578, doi. 10.1002/app.26425

By:

S. Chawla;
A. K. Ghosh;
D. K. Avasthi;
P. Kulriya;
S. Ahmad

Publication type:

Article

Synthesis and characterization of polyurea microcapsules containing essential oils with antigerminative activity.

Published in:

Journal of Applied Polymer Science, 2007, v. 105, n. 6, p. 3568, doi. 10.1002/app.26420

By:

Paola Scarfato;
Elvira Avallone;
Pio Iannelli;
Vincenzo De Feo;
Domenico Acierno

Publication type:

Article