Works matching IS 00218995 AND DT 2004 AND VI 94 AND IP 5

Results: 50

Ethylene–propylene–rubber (EPR)/polydimethylsiloxane (PDMS) binary polymer blends: Morphology and viscoelastic properties.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2240

By:

M. Carlberg;
D. Colombini;
F. H. J. Maurer

Publication type:

Article

Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2212

By:

Min‐Su Kim;
Cha‐Cheol Park;
Subhendu Ray Chowdhury;
Gue‐Hyun Kim

Publication type:

Article

Exothermic effect in the process of electron‐beam curing of epoxy resins.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2217

By:

Zuo‐Guang Zhang;
Yu‐Bin Li;
Yan Wu;
Feng‐Mei Li

Publication type:

Article

Conversion of polyester into heat‐resistant polyamide by reacting with aromatic diamine compound II. Semibatch reaction by nitrogen gas sweeping process.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2223

By:

Yangsoo Kim;
Young‐Jin Choi

Publication type:

Article

Polymerized high internal phase emulsions containing a porogen: Specific surface area and sorption.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2233

By:

Anatoly Y. Sergienko;
Huwen Tai;
Moshe Narkis;
Michael S. Silverstein

Publication type:

Article

Preparation of superparamagnetic immunomicrospheres and application for antibody purification.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2205

By:

Xianqiao Liu;
Yueping Guan;
Yu Yang;
Zhiya Ma;
Xiaobing Wu;
Huizhou Liu

Publication type:

Article

Isothermal crystallization kinetics and melting behavior of nylon/saponite and nylon/montmorillonite nanocomposites.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2196

By:

Tzong‐Ming Wu;
Yi‐Hsin Lien;
Sung‐Fu Hsu

Publication type:

Article

Effect of vibration on crystal morphology and structure of isotactic polypropylene in nonisothermal crystallization.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2187

By:

Qiang Zheng;
Yonggang Shangguan;
Lifang Tong;
Mao Peng

Publication type:

Article

Effect of CsBr–MnCl2 mixed fillers on the crystal structure and optical and electrical properties of poly(vinyl alcohol).

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2178

By:

M. Abdelaziz

Publication type:

Article

Multifunctional coupling agents. II. Chain extension and terminal group modification of polyamides.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2170

By:

L. Jakisch;
H. Komber;
R. Wursche;
F. Böhme

Publication type:

Article

Metallization of crosslinked epoxy resins derived from diglycidyl ethers of poly(ethylene glycol) and bisphenol a by reduction of polymer‐incorporated cobalt ion.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2164

By:

Mitsuhiro Shibata;
Masamichi Kuribayashi;
Takayasu Uda

Publication type:

Article

Application of supercritical carbon dioxide in the preparation of biodegradable polylactide membranes.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2158

By:

Qun Xu;
Maizhi Pang;
Qi Peng;
Jianbo Li;
Yu Jiang

Publication type:

Article

A one‐step method for fabricating chitosan microspheres.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2150

By:

Shyh Ming Kuo;
Gregory Cheng‐Chie Niu;
Shwu Jen Chang;
Chia Hung Kuo;
Miin Shyan Bair

Publication type:

Article

Thermomechanical film properties and aging of blends of poly(lactic acid) and malonate oligomers.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2140

By:

N. Ljungberg;
B. Wesslén

Publication type:

Article

Thermal decomposition behavior and flame retardancy of polycarbonate containing organic metal salts: Effect of salt composition.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2131

By:

Akio Nodera;
Toshitaka Kanai

Publication type:

Article

Adsorption properties of a chelating resin containing hydroxy group and iminodiacetic acid for copper ions.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2123

By:

Chuh‐Yean Chen;
Suz‐Yen Chen

Publication type:

Article

Melt free‐radical grafting of maleimides with hindered phenol groups onto polyethylene.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2117

By:

Taek Hyeon Kim

Publication type:

Article

Independent control of lower critical solution temperature and swelling behavior with pH for poly(N‐isopropylacrylamide‐co‐maleic acid).

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2110

By:

Rachael A. Weiss‐Malik;
Francisco J. Solis;
Brent L. Vernon

Publication type:

Article

Effect of molecular chain structure of the cured epoxy resin containing hyperbranched (3‐hydroxyphenyl) phosphate on expansion and flame retardance.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2065

By:

Jing Deng;
Shengwu Zhu;
Wenfang Shi

Publication type:

Article

Rheological and mechanical properties of compatibilized polystyrene/ethylene vinyl acetate blends.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2071

By:

L. W. Tang;
K. C. Tam;
C. Y. Yue;
X. Hu;
Y. C. Lam;
L. Li

Publication type:

Article

Pervaporation separation of water–acetic acid mixtures through NaY zeolite‐incorporated sodium alginate membranes.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2101

By:

A. A. Kittur;
S. M. Tambe;
S. S. Kulkarni;
M. Y. Kariduraganavar

Publication type:

Article

Polyimides containing 4,4′‐bipyridinium units.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2091

By:

C. Gaina;
V. Gaina;
A. Airinei;
E. Avram

Publication type:

Article

Imparting affinity sites for adenosine triphosphate on the surface of polyurethane through molecular imprinting.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2088

By:

K. Sreenivasan

Publication type:

Article

Rheological study of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semiinterpenetrating network formation.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2083

By:

Chi Zhang;
Allan J. Easteal

Publication type:

Article

Rheological properties and drug release characteristics of pH‐responsive hydrogelsThis article is CEPS Communication # 35Part of this paper was presented at the 30th International Symposium on Controlled Release of Bioactive Materials, Glasgow, Scotland held in July 19–23, 2003.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2057

By:

Tejraj M. Aminabhavi;
Sunil A. Agnihotri;
B. Vijaya Kumar Naidu

Publication type:

Article

Water‐swellable hydrophobic porous copolymer resins based on divinylbenzene and acrylonitrile. II. Pore structure and adsorption behavior.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2050

By:

Xiaoshan Tang;
Xunhua Wang;
Jun Yan

Publication type:

Article

Water‐swellable hydrophobic porous copolymer resins based on divinylbenzene and acrylonitrile. I. Water‐swelling behavior.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2041

By:

Xiaoshan Tang;
Jia Wei;
Jun Yan

Publication type:

Article

Softening of wood polymers induced by moisture studied by dynamic FTIR spectroscopy.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2032

By:

Margaretha Åkerholm;
Lennart Salmén

Publication type:

Article

Alloying of poly(vinyl chloride) to reduce plasticizer migration.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2022

By:

N. L. Thomas

Publication type:

Article

Study of plasma polymerization of dichloromethane on cotton and polyester fabricsThis work was conducted when the authors were associated with the Institute of Chemical Technology, University of Mumbai, India.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2014

By:

C. J. Jahagirdar;
L. B. Tiwari

Publication type:

Article

Influence of temperature changes on crystallization of an ethylene–propylene random copolymer.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 2008

By:

Maria Raimo

Publication type:

Article

Antimicrobial and physical properties of woolen fabrics cured with citric acid and chitosan.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1999

By:

S.‐H. Hsieh;
Z. K. Huang;
Z. Z. Huang;
Z. S. Tseng

Publication type:

Article

Effects of calcium carbonate, talc, mica, and glass‐fiber fillers on the ultrasonic weld strength of polypropylene.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1986

By:

Erol Sancaktar;
Eric Walker

Publication type:

Article

Binary and ternary blends of polyethylene, polypropylene, and polyamide 6,6: The effect of compatibilization on the morphology and rheology.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1976

By:

R. Krache;
D. Benachour;
P. Pötschke

Publication type:

Article

Preparation of silica‐filled poly(2‐hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during the sol–gel process.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1927

By:

Dar‐Jong Lin;
Ching‐Chung Chen;
Yi‐Che Su;
Shu‐Hui Huang;
Liao‐Ping Cheng

Publication type:

Article

Comparative studies of the properties of poly(methyl methacrylate)–clay nanocomposite materials prepared by in situ emulsion polymerization and solution dispersion.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1936

By:

Jui‐Ming Yeh;
Shir‐Joe Liou;
Mei‐Chun Lai;
Yu‐Wen Chang;
Cheng‐Yu Huang;
Chen‐Ping Chen;
Jenn‐Huey Jaw;
Tsung‐Yen Tsai;
Yuan‐Hsiang Yu

Publication type:

Article

Surface and thermal characteristics of rubber‐modified aromatic polyamide.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1947

By:

Young‐Wook Park;
Dong‐Sung Lee

Publication type:

Article

Block copolymers of unsaturated polyesters and functional elastomers.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1956

By:

A. Benny Cherian;
Eby Thomas Thachil

Publication type:

Article

Cellulose acetate deacetylation in benzene/acetic acid/water systems.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1965

By:

N. Olaru;
Liliana Olaru

Publication type:

Article

Synthesis and characterization of epoxy resins prepared under microwave irradiation.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1969

By:

Dariusz Bogdal;
Jaroslaw Gorczyk

Publication type:

Article

Effect of rigid particle size on the toughness of filled polypropylene.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1917

By:

I. L. Dubnikova;
S. M. Berezina;
A. V. Antonov

Publication type:

Article

Recycling of carbon/epoxy composites.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1912

By:

Yuyan Liu;
Linghui Meng;
Yudong Huang;
Jianjun Du

Publication type:

Article

Particle features of a poly(methyl methacrylate) resin prepared by a new emulsion polymerization process.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1905

By:

Yong‐Zhong Bao;
Zhi‐Ming Huang;
Zhi‐Xue Weng

Publication type:

Article

Glucose oxidase electrodes of poly(o‐anisidine), poly(o‐toluidine), and their copolymer as biosensors: A comparative study.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1877

By:

D. D. Borole;
U. R. Kapadi;
P. P. Mahulikar;
D. G. Hundiwale

Publication type:

Article

Emulsifier‐free emulsion polymerization of styrene.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1898

By:

Naser Sharifi‐Sanjani;
Morteza Soltan‐Dehghan;
Nader Naderi;
Ali Ranji

Publication type:

Article

Preparation and characterization of poly(methyl methacrylate) grafted sago starch using potassium persulfate as redox initiator.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1891

By:

Isam Y. M. Qudsieh;
A. Fakhru'l‐Razi;
Suleyman A. Muyibi;
Mansor B. Ahmad;
M. Z. Ab. Rahman;
Wan Md Zin Wan Yunus

Publication type:

Article

Studies on poly(acrylic acid)/attapulgite superabsorbent composites. II. Swelling behaviors of superabsorbent composites in saline solutions and hydrophilic solvent–water mixtures.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1869

By:

An Li;
Aiqin Wang;
Jianmin Chen

Publication type:

Article

Mechanical and thermal properties of glass bead–filled nylon‐6.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1885

By:

Li Huang;
Qiang Yuan;
Wei Jiang;
Lijia An;
Shengxiang Jiang;
R. K. Y. Li

Publication type:

Article

Crystalline structure and mechanical properties of wet‐spun dibutyrylchitin fibers and products of their alkaline treatment.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1861

By:

Andrzej Włochowicz;
Lidia Szosland;
Dorota Biniaś;
Joanna Szumilewicz

Publication type:

Article

Modification of lignin–polyethylene blends with high lignin content using ethylene–vinylacetate copolymer as modifier.

Published in:

Journal of Applied Polymer Science, 2004, v. 94, n. 5, p. 1855

By:

Pavol Alexy;
Božena Košíková;
Gabriela Crkonová;
Adriána Gregorová;
Pavol Martiš

Publication type:

Article