Works matching IS 00218995 AND DT 2003 AND VI 89 AND IP 5

Results: 38

Properties of impregnation resin added to multifunctional epoxy at cryogenic temperature.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1385

By:

Qiang Chen;
Bingjun Gao;
Jinglin Chen

Publication type:

Article

Structure and gas separation properties of composite films based on polyaniline.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1379

By:

A. V. Orlov;
S. G. Kiseleva;
G. P. Karpacheva;
V. V. Teplyakov;
D. A. Syrtsova;
L. E. Starannikova;
T. L. Lebedeva

Publication type:

Article

Curing process of powdered phenolformaldehyde resol resins and the role of water in the curing systems.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1371

By:

Guangbo He;
Bernard Riedl;
Abdellatif Aït-Kadi

Publication type:

Article

Physical properties of aliphatic polycarbonates made from CO2 and epoxides.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1163

By:

Sudhir D. Thorat;
Paul J. Phillips;
Viktor Semenov;
Andre Gakh

Publication type:

Article

Synthesis, characterization, and rheological studies of methacrylic acidethyl acrylatediallyl phthalate copolymers.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1430

By:

Manjeet Jassal;
Badri Narayan Acharya;
Pushpa Bajaj

Publication type:

Article

Calorimetric and rheological study of isocyanatepyrolysis oil blends.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1362

By:

Mélany Gagnon;
Christian Roy;
Denis Rodrigue;
Bernard Riedl

Publication type:

Article

The influence of various reaction parameters on the performance of (α-diimine)nickel(II) catalysts in ethylene oligomerization reactions.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1356

By:

Markus Helldörfer;
Helmut G. Alt

Publication type:

Article

Influence of hydrophobe content on phase coexistence curves of aqueous two-phase solutions of associative polyacrylamide copolymers and poly(ethylene glycol).

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1351

By:

B. F. Abu-Sharkh;
E. Z. Hamad;
S. A. Ali

Publication type:

Article

Graft copolymerization of acrylic acid onto xanthum gum using a potassium monopersulfate/Fe2+ redox pair.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1341

By:

Peeyoosh Kant Pandey;
Jaya Banerjee;
Kavita Taunk;
Kunj Behari

Publication type:

Article

Synthesis and thermotropic liquid-crystalline behavior of novel main-chain poly(aryl ether ketones).

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1347

By:

Wei Hu;
Baijun Liu;
Dong Wang;
Yanhua Yang;
Chunhai Chen;
Zhenhua Jiang;
Wanjin Zhang;
Zhongwen Wu

Publication type:

Article

Potentials in anionic polyelectrolyte hydrogels.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1319

By:

F. Gao;
F. B. Reitz;
G. H. Pollack

Publication type:

Article

Physical properties of wool fibers modified with isocyanate compounds.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1390

By:

Giuliano Freddi;
Riccardo Innocenti;
Takayuki Arai;
Hideki Shiozaki;
Masuhiro Tsukada

Publication type:

Article

Effect of the polyurethane crystalline interphase formed at an Al surface on water-vapor absorption.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1417

By:

Jangsoon Kim;
Earle R. Ryba;
Jianming Bai

Publication type:

Article

Closed-loop recycling of postused PP-filled garden chairs using the restabilization technique. III. Influence of artificial weathering.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1311

By:

C. N. Kartalis;
C. D. Papaspyrides;
R. Pfaendner

Publication type:

Article

Increase of catalyst activity by transfer of bulky alkyl groups from zirconocene complexes to methylalumoxane.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1336

By:

Christine E. Denner;
Helmut G. Alt

Publication type:

Article

Rheokinetic modeling of HTPBTDI and HTPBDOATDI systems.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1331

By:

B. M. Bandgar;
K. C. Sharma;
T. Mukundan;
V. N. Krishnamurthy

Publication type:

Article

Study of poly(acrylamide-co-2-acrylamido-2-methylpropane sulfonic acid) hydrogels made using gamma radiation initiation.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1322

By:

Chi Zhang;
Allan J. Easteal

Publication type:

Article

Reactive compatibilization of the poly(butylene terephthalate)EVA blend by maleic anhydride. II. Correlations among gel contents, grafting yields, and mechanical properties.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1305

By:

Seon-Jun Kim;
Cheul-Jung Kang;
Subhendu R. Chowdhury;
Won-Jei Cho;
Chang-Sik Ha

Publication type:

Article

Electrochemical capacitor composed of doped polyaniline and polymer electrolyte membrane.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1300

By:

Kwang Sun Ryu;
Xianlan Wu;
Young-Gi Lee;
Soon Ho Chang

Publication type:

Article

Migration of additives from food grade polyvinyl chloride (PVC) films: Effect of plasticization by polymeric modifiers instead of conventional plasticizers.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1291

By:

J.-L. Audic;
D. Reyx;
J.-C. Brosse

Publication type:

Article

Morphology of phase separated blends of poly(cyclohexyl methacrylate) with poly(vinyl acetate).

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1284

By:

B. Serrano;
J. Baselga;
I. Esteban;
L. M. Sesé;
I. F. Piérola

Publication type:

Article

Synthesis and functionalities of poly(N-vinylalkylamide). XIV. Polyvinylamine produced by hydrolysis of poly(N-vinylformamide) and its functionalization.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1277

By:

Kazuya Yamamoto;
Yachiyo Imamura;
Emi Nagatomo;
Takeshi Serizawa;
Yoichiro Muraoka;
Mitsuru Akashi

Publication type:

Article

Acrylic rubber-fluorocarbon rubber miscible blends: Effect of curatives and fillers on cure, mechanical, aging, and swelling properties.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1442

By:

M. Abdul Kader;
Anil K. Bhowmick

Publication type:

Article

Synthesis and fluorescence in solution of polybenzimidazolylphenylenephthalamides.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1412

By:

T. Fujimura;
M. Tsuchiya;
T. Koizumi;
K. Ishimaru;
T. Kojima

Publication type:

Article

Graft copolymers of lignin as hydrophobic agents for plastic (wood-filled) composites.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1266

By:

Timothy Adcock;
Vipul Shah;
Meng-jiu Chen;
John J. Meister

Publication type:

Article

Fluorocarbon-containing hydrophobically modified poly(acrylic acid) gels: Gel structure and water state.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1258

By:

Qin Tian;
Xi-An Zhao;
Xiao-Zhen Tang;
Yun-Xiang Zhang

Publication type:

Article

ZnBr2-catalyzed chemical effects in poly(acrylonitrile- co-butadiene).

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1250

By:

Yadira Vega-Cantú;
Robert Hauge;
Lewis Norman;
W. Edward Billups

Publication type:

Article

Analysis of the thermodynamic compatibility of poly(vinyl chloride) and nitrile rubbers from inverse gas chromatography.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1242

By:

Jan-Chan Huang

Publication type:

Article

Dose distributions of high-energy electrons into planar and cylindrical layers of low-density polyethylene, high-density polyethylene, poly(vinyl chloride), and copper for industrial applications.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1230

By:

A. Behjat;
Dj. Gheysari;
A. Mojrek

Publication type:

Article

Stability and depolymerization of poly(sebacic anhydride) under high moisture environment.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1423

By:

Cheng-Kuang Chan;
I-Ming Chu

Publication type:

Article

Atomic force and scanning electron microscopic studies of effect of crosslinking system on properties of maleated ethylenepropylenediene monomer rubber composites filled with short melamine fibers.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1211

By:

R. S. Rajeev;
Anil K. Bhowmick;
S. K. De;
S. Bandyopadhyay

Publication type:

Article

Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites (This article is Kansas Agricultural Experiment Station contribution 02-365-J.).

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1203

By:

Tianyi Ke;
Xiuzhi Sun

Publication type:

Article

Copolymerization and thermal behavior of methyl methacrylate with N-(phenyl/p-tolyl) itaconimides.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1195

By:

Vishal Anand;
Veena Choudhary

Publication type:

Article

Modified polyurethane with improvement of acid dye dyeability.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1397

By:

Huei-Hsiung Wang;
Li-En Lin

Publication type:

Article

Preparation and characterization of poly(methyl methacrylate)clay nanocomposites via melt intercalation: The effect of organoclay on the structure and thermal properties.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1186

By:

Sandeep Kumar;
Jyoti P. Jog;
Upendra Natarajan

Publication type:

Article

Inhibition of polyketone oxidation.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1182

By:

I. A. Kalinina;
G. P. Belov;
K. Z. Gumargalieva;
Yu. A. Shlyapnikov;
G. E. Zaikov

Publication type:

Article

Preparation and characterization of the complex latex formed through complexation of two polymer latexes with chemically complementary structure.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1405

By:

Mingjiao Yang;
Yi Dan

Publication type:

Article

Polymerization of propylene using the high-activity ZieglerNatta catalyst system SiO2/MgCl2 (ethoxide type)/TiCl4/Di-n-butyl phthalate/triethylaluminum/dimethoxy methyl cyclohexyl silane.

Published in:

Journal of Applied Polymer Science, 2003, v. 89, n. 5, p. 1177

By:

G. H. Zohuri;
F. Azimfar;
R. Jamjah;
S. Ahmadjo

Publication type:

Article

Works matching IS 00218995 AND DT 2003 AND VI 89 AND IP 5

Properties of impregnation resin added to multifunctional epoxy at cryogenic temperature.

Structure and gas separation properties of composite films based on polyaniline.

Curing process of powdered phenolformaldehyde resol resins and the role of water in the curing systems.

Physical properties of aliphatic polycarbonates made from CO<sub>2</sub> and epoxides.

Synthesis, characterization, and rheological studies of methacrylic acidethyl acrylatediallyl phthalate copolymers.

Calorimetric and rheological study of isocyanatepyrolysis oil blends.

The influence of various reaction parameters on the performance of (α-diimine)nickel(II) catalysts in ethylene oligomerization reactions.

Influence of hydrophobe content on phase coexistence curves of aqueous two-phase solutions of associative polyacrylamide copolymers and poly(ethylene glycol).

Graft copolymerization of acrylic acid onto xanthum gum using a potassium monopersulfate/Fe<sup>2+</sup> redox pair.

Synthesis and thermotropic liquid-crystalline behavior of novel main-chain poly(aryl ether ketones).

Potentials in anionic polyelectrolyte hydrogels.

Physical properties of wool fibers modified with isocyanate compounds.

Effect of the polyurethane crystalline interphase formed at an Al surface on water-vapor absorption.

Closed-loop recycling of postused PP-filled garden chairs using the restabilization technique. III. Influence of artificial weathering.

Increase of catalyst activity by transfer of bulky alkyl groups from zirconocene complexes to methylalumoxane.

Rheokinetic modeling of HTPBTDI and HTPBDOATDI systems.

Study of poly(acrylamide-co-2-acrylamido-2-methylpropane sulfonic acid) hydrogels made using gamma radiation initiation.

Reactive compatibilization of the poly(butylene terephthalate)EVA blend by maleic anhydride. II. Correlations among gel contents, grafting yields, and mechanical properties.

Electrochemical capacitor composed of doped polyaniline and polymer electrolyte membrane.

Migration of additives from food grade polyvinyl chloride (PVC) films: Effect of plasticization by polymeric modifiers instead of conventional plasticizers.

Morphology of phase separated blends of poly(cyclohexyl methacrylate) with poly(vinyl acetate).

Synthesis and functionalities of poly(N-vinylalkylamide). XIV. Polyvinylamine produced by hydrolysis of poly(N-vinylformamide) and its functionalization.

Acrylic rubber-fluorocarbon rubber miscible blends: Effect of curatives and fillers on cure, mechanical, aging, and swelling properties.

Synthesis and fluorescence in solution of polybenzimidazolylphenylenephthalamides.

Graft copolymers of lignin as hydrophobic agents for plastic (wood-filled) composites.

Fluorocarbon-containing hydrophobically modified poly(acrylic acid) gels: Gel structure and water state.

ZnBr<sub>2</sub>-catalyzed chemical effects in poly(acrylonitrile- co-butadiene).

Analysis of the thermodynamic compatibility of poly(vinyl chloride) and nitrile rubbers from inverse gas chromatography.

Dose distributions of high-energy electrons into planar and cylindrical layers of low-density polyethylene, high-density polyethylene, poly(vinyl chloride), and copper for industrial applications.

Stability and depolymerization of poly(sebacic anhydride) under high moisture environment.

Atomic force and scanning electron microscopic studies of effect of crosslinking system on properties of maleated ethylenepropylenediene monomer rubber composites filled with short melamine fibers.

Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites (This article is Kansas Agricultural Experiment Station contribution 02-365-J.).

Copolymerization and thermal behavior of methyl methacrylate with N-(phenyl/p-tolyl) itaconimides.

Modified polyurethane with improvement of acid dye dyeability.

Preparation and characterization of poly(methyl methacrylate)clay nanocomposites via melt intercalation: The effect of organoclay on the structure and thermal properties.

Inhibition of polyketone oxidation.

Preparation and characterization of the complex latex formed through complexation of two polymer latexes with chemically complementary structure.

Polymerization of propylene using the high-activity ZieglerNatta catalyst system SiO<sub>2</sub>/MgCl<sub>2</sub> (ethoxide type)/TiCl<sub>4</sub>/Di-n-butyl phthalate/triethylaluminum/dimethoxy methyl cyclohexyl silane.