Works matching IS 00027820 AND DT 2015 AND VI 98 AND IP 11

Results: 29

Preface.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3423, doi. 10.1111/jace.13968
By:
- Kieback, Bernd;
- Bordia, Rajendra K.;
- Bouvard, Didier;
- Kang, Suk‐Joong L.;
- Olevsky, Eugene A.
Publication type:
Article
Theory of Sintering in Presence of Pressure and Torque.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3453, doi. 10.1111/jace.13603
By:
- Nöthe, Michael;
- Rasp, Tobias;
- Kraft, Torsten;
- Kieback, Bernd;
- Olevsky, E.
Publication type:
Article
Effect of Active Components of Sintering Atmosphere on Reduction/Oxidation Processes During Sintering of Cr-Alloyed PM Steels.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3561, doi. 10.1111/jace.13607
By:
- Hryha, Eduard;
- Karamchedu, Seshendra;
- Riabov, Dmitri;
- Nyborg, Lars;
- Berg, Sigurd;
- Bouvard, D.
Publication type:
Article
Effect of Binder Composition on WC Grain Growth in Cemented Carbides.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3596, doi. 10.1111/jace.13748
By:
- Pellan, Maxime;
- Lay, Sabine;
- Missiaen, Jean‐Michel;
- Norgren, Susanne;
- Angseryd, Jenny;
- Coronel, Ernesto;
- Persson, Tomas;
- Bordia, R.
Publication type:
Article
Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3553, doi. 10.1111/jace.13621
By:
- Wei, Xialu;
- Giuntini, Diletta;
- Maximenko, Andrey L.;
- Haines, Christopher D.;
- Olevsky, Eugene A.;
- Kang, S.‐J.
Publication type:
Article
Densification and Microstructural Evolution of Hierarchically Porous Ceramics During Sintering.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3424, doi. 10.1111/jace.13812
By:
- Shang, Haixia;
- Mohanram, Aravind;
- Bordia, Rajendra K.;
- Olevsky, E.
Publication type:
Article
Contribution of Electric Current into Densification Kinetics During Spark Plasma Sintering of Conductive Powder.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3509, doi. 10.1111/jace.13816
By:
- Aleksandrova, Elena V.;
- Ilyina, Aleksandra M.;
- Grigoryev, Evgeny G.;
- Olevsky, Eugene A.;
- Bordia, R.
Publication type:
Article
Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3582, doi. 10.1111/jace.13691
By:
- García‐Junceda, Andrea;
- García‐Rodríguez, Nerea;
- Campos, Mónica;
- Cartón‐Cordero, Marta;
- Torralba, José Manuel;
- Olevsky, E.
Publication type:
Article
Influence of Dihedral Angle and Grain Coordination on Densification Rate During Intermediate and Final Sintering Stages.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3469, doi. 10.1111/jace.13577
By:
- Delannay, Francis;
- Bouvard, D.
Publication type:
Article
Homogenization of Biporous Agglomerated Powder Structures During High-Temperature Consolidation.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3445, doi. 10.1111/jace.13760
By:
- Maximenko, Andrey L.;
- Olevsky, Eugene A.;
- Grigoryev, Evgeny G.;
- Bouvard, D.
Publication type:
Article
Comparison of Consolidation Routes for Mo-Si-B Materials Prepared by Using Nitride Containing Powders.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3569, doi. 10.1111/jace.13764
By:
- Wiltner, Almut;
- Klöden, Burghardt;
- Hilger, Isabell;
- Weißgärber, Thomas;
- Kieback, Bernd;
- Bordia, R.
Publication type:
Article
Bimodal Grain Size Distribution of Nanostructured Ferritic ODS Fe-Cr Alloys.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3576, doi. 10.1111/jace.13833
By:
- Hilger, Isabell;
- Bergner, Frank;
- Weißgärber, Thomas;
- Bouvard, D.
Publication type:
Article
Advancement of Tooling for Spark Plasma Sintering.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3529, doi. 10.1111/jace.13528
By:
- Giuntini, Diletta;
- Raethel, Jan;
- Herrmann, Mathias;
- Michaelis, Alexander;
- Olevsky, Eugene A.;
- Bouvard, D.
Publication type:
Article
Sintering Kinetics Across Pore Closure Transition Accounting for Continuous Increase in Grain Coordination with Density.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3476, doi. 10.1111/jace.13594
By:
- Delannay, Francis;
- Kang, S.‐J.
Publication type:
Article
Temperature Distributions During Flash Sintering of 8% Yttria-Stabilized Zirconia.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3525, doi. 10.1111/jace.13786
By:
- Pereira da Silva, João Gustavo;
- Lebrun, Jean‐Marie;
- Al‐Qureshi, Hazim Ali;
- Janssen, Rolf;
- Raj, Rishi;
- Olevsky, E.
Publication type:
Article
Micro-Macro Analysis of Capacitor Discharge Sintering in Copper-Diamond Bead.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3538, doi. 10.1111/jace.13660
By:
- Di Napoli, Paolo;
- Cagliero, Roberto;
- Maizza, Giovanni;
- Olevsky, E.
Publication type:
Article
Effects of Surface Diffusion and Heating Rate on First-Stage Sintering That Densifies by Grain-Boundary Diffusion.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3483, doi. 10.1111/jace.13662
By:
- Luo, Wendong;
- Pan, Jingzhe;
- Olevsky, E.
Publication type:
Article
The Anisotropy of Dimensional Change on Sintering of Iron.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3431, doi. 10.1111/jace.13852
By:
- Molinari, Alberto;
- Torresani, Elisa;
- Menapace, Cinzia;
- Larsson, Mats;
- Bordia, R.
Publication type:
Article
Core-Shell Lead-Free Piezoelectric Ceramics: Current Status and Advanced Characterization of the Bi1/2Na1/2TiO3-SrTiO3 System.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3405, doi. 10.1111/jace.13853
By:
- Acosta, Matias;
- Schmitt, Ljubomira A.;
- Molina‐Luna, Leopoldo;
- Scherrer, Michael C.;
- Brilz, Michael;
- Webber, Kyle G.;
- Deluca, Marco;
- Kleebe, Hans‐Joachim;
- Rödel, Jürgen;
- Donner, Wolfgang;
- Johnson, D.
Publication type:
Article
Compilation and Evaluation of the Pressure-Assisted Master Sintering Surface for Low-Temperature Cofired Ceramics.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3503, doi. 10.1111/jace.13732
By:
- Brandt, Bjoern;
- Rabe, Torsten;
- Bordia, R.
Publication type:
Article
Lean Atmospheres for Sintering of Chromium Alloyed Powder Metallurgy Steels.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3588, doi. 10.1111/jace.13617
By:
- Karamchedu, Seshendra;
- Hryha, Eduard;
- Nyborg, Lars;
- Kang, S.‐J.
Publication type:
Article
Flash Microwave Sintering of Transparent Yb:(LaY)2O3 Ceramics.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3518, doi. 10.1111/jace.13809
By:
- Bykov, Yury V.;
- Egorov, Sergei V.;
- Eremeev, Anatolii G.;
- Kholoptsev, Vladislav V.;
- Rybakov, Kirill I.;
- Sorokin, Andrei A.;
- Olevsky, E.
Publication type:
Article
Sintering Simulation of Periodic Macro Porous Alumina.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3496, doi. 10.1111/jace.13684
By:
- Besler, Robert;
- Rossetti da Silva, Marcel;
- Rosario, Jefferson J.;
- Dosta, Maksym;
- Heinrich, Stefan;
- Janssen, Rolf;
- Bordia, R.
Publication type:
Article
Correlation Between Anisotropic Green Microstructure of Spherical-Shaped Alumina Particles and Their Shrinkage Behavior.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3438, doi. 10.1111/jace.13567
By:
- Fu, Zongwen;
- Polfer, Pit;
- Kraft, Torsten;
- Roosen, Andreas;
- Bouvard, D.
Publication type:
Article
Cover Image, Volume 98, Issue 11.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. i, doi. 10.1111/jace.13445
Publication type:
Article
Back Cover, Volume 98, Issue 11.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. ii, doi. 10.1111/jace.13446
Publication type:
Article
Temperature Distribution in Metallic Powder Particles During Initial Stage of Field-Activated Sintering.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3547, doi. 10.1111/jace.13757
By:
- Trapp, Johannes;
- Kieback, Bernd;
- Suk‐Kang
Publication type:
Article
A New Closed-Form Model for Solid-State Sintering Kinetics.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3460, doi. 10.1111/jace.13633
By:
- Missiaen, Jean‐Michel;
- Lebrun, Jean‐Marie;
- Olevsky, E.
Publication type:
Article
Modeling the Microstructural Evolution During Constrained Sintering.
Published in:
Journal of the American Ceramic Society, 2015, v. 98, n. 11, p. 3490, doi. 10.1111/jace.13701
By:
- Bjørk, Rasmus;
- Frandsen, Hendrik Lund;
- Pryds, Nini;
- Olevsky, E.
Publication type:
Article

Works matching IS 00027820 AND DT 2015 AND VI 98 AND IP 11

Preface.

Theory of Sintering in Presence of Pressure and Torque.

Effect of Active Components of Sintering Atmosphere on Reduction/Oxidation Processes During Sintering of Cr-Alloyed PM Steels.

Effect of Binder Composition on WC Grain Growth in Cemented Carbides.

Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup.

Densification and Microstructural Evolution of Hierarchically Porous Ceramics During Sintering.

Contribution of Electric Current into Densification Kinetics During Spark Plasma Sintering of Conductive Powder.

Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP.

Influence of Dihedral Angle and Grain Coordination on Densification Rate During Intermediate and Final Sintering Stages.

Homogenization of Biporous Agglomerated Powder Structures During High-Temperature Consolidation.

Comparison of Consolidation Routes for Mo-Si-B Materials Prepared by Using Nitride Containing Powders.

Bimodal Grain Size Distribution of Nanostructured Ferritic ODS Fe-Cr Alloys.

Advancement of Tooling for Spark Plasma Sintering.

Sintering Kinetics Across Pore Closure Transition Accounting for Continuous Increase in Grain Coordination with Density.

Temperature Distributions During Flash Sintering of 8% Yttria-Stabilized Zirconia.

Micro-Macro Analysis of Capacitor Discharge Sintering in Copper-Diamond Bead.

Effects of Surface Diffusion and Heating Rate on First-Stage Sintering That Densifies by Grain-Boundary Diffusion.

The Anisotropy of Dimensional Change on Sintering of Iron.

Core-Shell Lead-Free Piezoelectric Ceramics: Current Status and Advanced Characterization of the Bi<sub>1/2</sub>Na<sub>1/2</sub>TiO<sub>3</sub>-SrTiO<sub>3</sub> System.

Compilation and Evaluation of the Pressure-Assisted Master Sintering Surface for Low-Temperature Cofired Ceramics.

Lean Atmospheres for Sintering of Chromium Alloyed Powder Metallurgy Steels.

Flash Microwave Sintering of Transparent Yb:(LaY)<sub>2</sub>O<sub>3</sub> Ceramics.

Sintering Simulation of Periodic Macro Porous Alumina.

Correlation Between Anisotropic Green Microstructure of Spherical-Shaped Alumina Particles and Their Shrinkage Behavior.

Cover Image, Volume 98, Issue 11.

Back Cover, Volume 98, Issue 11.

Temperature Distribution in Metallic Powder Particles During Initial Stage of Field-Activated Sintering.

A New Closed-Form Model for Solid-State Sintering Kinetics.

Modeling the Microstructural Evolution During Constrained Sintering.