Works matching DE "WELDED joint fatigue"
Results: 152
Effects of friction stir lap welding parameters on weld features on advancing side and fracture strength of AA6060-T5 welds.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 3, p. 1251, doi. 10.1007/s10853-011-5747-6
- By:
- Publication type:
- Article
Determination of parameters of an exponential function in the description of a fatigue curve.
- Published in:
- Strength of Materials, 2008, v. 40, n. 3, p. 343, doi. 10.1007/s11223-008-9020-4
- By:
- Publication type:
- Article
Evaluation of the ultimate stresses in a cycle for welded structures with high residual stresses based on test results for small specimens without residual stresses.
- Published in:
- Strength of Materials, 2008, v. 40, n. 2, p. 212, doi. 10.1007/s11223-008-9010-6
- By:
- Publication type:
- Article
On Improvement of Methods for Experimental Determination of Strength Characteristics of NPP Component Materials.
- Published in:
- Strength of Materials, 2004, v. 36, n. 1, p. 63, doi. 10.1023/B:STOM.0000020116.96002.03
- By:
- Publication type:
- Article
Assessment of In-Service Degradation of Mechanical Properties of NPP Reactor and Piping Materials.
- Published in:
- Strength of Materials, 2004, v. 36, n. 1, p. 71, doi. 10.1023/B:STOM.0000020117.88585.c2
- By:
- Publication type:
- Article
Fatigue life prediction of joggle weld joint using virtual strain gauge and its validation through experiments.
- Published in:
- Mechanics & Industry, 2018, v. 19, n. 6, p. 1, doi. 10.1051/meca/2018047
- By:
- Publication type:
- Article
REHABILITATION TECHNIQUES APPLIED TO FILLET WELDED JOINTS IN ORDER TO INCREASE THE FATIGUE LIFE TIME.
- Published in:
- Fiability & Durability / Fiabilitate si Durabilitate, 2018, n. 1, p. 50
- By:
- Publication type:
- Article
FATIGUE BEHAVIOR OF WELDED STRUCTURES.
- Published in:
- Fiability & Durability / Fiabilitate si Durabilitate, 2018, n. 1, p. 44
- By:
- Publication type:
- Article
NUMERICAL ANALYSIS OF THERMAL STRESSES IN WELDED JOINT MADE OF STEELS X20 AND X22.
- Published in:
- Thermal Science, 2014, v. 18, n. Supp 1, p. S121, doi. 10.2298/TSCI131211178M
- By:
- Publication type:
- Article
Locations of strain gauges for fatigue analysis of welded joints (3).
- Published in:
- Welding International, 2012, v. 26, n. 10, p. 739, doi. 10.1080/09507116.2011.590686
- By:
- Publication type:
- Article
Determination of residual welding stresses of padded CCM roll using Sachs method.
- Published in:
- Welding International, 2012, v. 26, n. 7, p. 521, doi. 10.1080/09507116.2011.600005
- By:
- Publication type:
- Article
Optimization of the shape of edges for welded joints with fillet welds.
- Published in:
- Welding International, 2012, v. 26, n. 5, p. 405, doi. 10.1080/09507116.2011.600084
- By:
- Publication type:
- Article
Development of residual stresses in fatigue-stressed joints subjected to four-point bending.
- Published in:
- Welding International, 2012, v. 26, n. 3, p. 196, doi. 10.1080/09507116.2011.592692
- By:
- Publication type:
- Article
Effect of off-centre tensile loading on the stress state of butt-welded joints.
- Published in:
- Welding International, 2011, v. 25, n. 11, p. 872, doi. 10.1080/09507116.2011.581426
- By:
- Publication type:
- Article
Fatigue life of AISI 316L stainless steel welded joints, obtained by GMAW.
- Published in:
- Welding International, 2009, v. 23, n. 10, p. 778, doi. 10.1080/09507110902843347
- By:
- Publication type:
- Article
Effect of post-heat treatment on the fatigue behaviour of a friction stir spot-welded Al-Mg-Si alloy.
- Published in:
- Welding International, 2009, v. 23, n. 7, p. 481, doi. 10.1080/09507110802542981
- By:
- Publication type:
- Article
Analysis of martensite transformation behaviour in welded joints of low transformation-temperature materials.
- Published in:
- Welding International, 2009, v. 23, n. 6, p. 411, doi. 10.1080/09507110802542882
- By:
- Publication type:
- Article
Reliability assessment for micro-solder joints.
- Published in:
- Welding International, 2008, v. 22, n. 11, p. 773, doi. 10.1080/09507110802551412
- By:
- Publication type:
- Article
Method for the evaluation of the low-cycle fatigue strength of welded joints using the J-integral energy criterion.
- Published in:
- Welding International, 2007, v. 21, n. 9, p. 668, doi. 10.1080/09507110701631208
- By:
- Publication type:
- Article
The effect of finess of Cu-Ni-Fe alloys on the quality of TIG made welds.
- Published in:
- Welding International, 2007, v. 21, n. 8, p. 593, doi. 10.1080/09507110701637924
- By:
- Publication type:
- Article
Mechanical characteristics of titanium welded joints in cyclic loading.
- Published in:
- Welding International, 2007, v. 21, n. 8, p. 596, doi. 10.1080/09507110701631216
- By:
- Publication type:
- Article
Effects of weld shape and defect size on the stress and strain in a welded joint to a vertical steel vessel.
- Published in:
- Chemical & Petroleum Engineering, 2006, v. 42, n. 9/10, p. 538, doi. 10.1007/s10556-006-0139-5
- By:
- Publication type:
- Article
Characteristics of Nd:YAG laser welded joints of dual phase steel.
- Published in:
- Archives of Civil & Mechanical Engineering (Oficyna Wydawnicza Politechniki Wroclawskiej), 2009, v. 9, n. 4, p. 85
- By:
- Publication type:
- Article
Diagnosing and forecasting the residual service life of welded metal structures of bridge cranes using metal foils.
- Published in:
- Russian Journal of Nondestructive Testing, 2007, v. 43, n. 12, p. 842, doi. 10.1134/S1061830907120078
- By:
- Publication type:
- Article
Research on Hot Spot Stress Calculation Method of CHS-CFSHS Joints.
- Published in:
- Jordan Journal of Civil Engineering, 2018, v. 12, n. 2, p. 323
- By:
- Publication type:
- Article
STUDY ON FATIGUE BEHAVIOR OF STRENGTHENED NON-LOAD-CARRYING CRUCIFORM WELDED JOINTS USING CARBON FIBER SHEETS.
- Published in:
- International Journal of Structural Stability & Dynamics, 2012, v. 12, n. 1, p. 179, doi. 10.1142/S0219455412004586
- By:
- Publication type:
- Article
Effects of weld size on stress concentration factors of CHS-CFSHS joints.
- Published in:
- Fracture & Structural Integrity, 2018, v. 12, p. 45, doi. 10.3221/IGF-ESIS.45.04
- By:
- Publication type:
- Article
Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L.
- Published in:
- Fracture & Structural Integrity, 2017, v. 11, p. 332, doi. 10.3221/IGF-ESIS.41.44
- By:
- Publication type:
- Article
Review of the Influence of non-singular higher order terms on the stress field of thin welded lap joints and small inclined cracks in plates.
- Published in:
- Fracture & Structural Integrity, 2017, v. 11, p. 260, doi. 10.3221/IGF-ESIS.41.35
- By:
- Publication type:
- Article
Comparative study of multiaxial fatigue methods applied to welded joints in marine structures.
- Published in:
- Fracture & Structural Integrity, 2016, v. 10, p. 173, doi. 10.3221/IGF-ESIS.37.24
- By:
- Publication type:
- Article
Previsione della resistenza a fatica in saldature per punti attraverso modellazione solida.
- Published in:
- Fracture & Structural Integrity, 2010, v. 4, p. 79, doi. 10.3221/IGF-ESIS.12.08
- By:
- Publication type:
- Article
Fatigue failure of welded connections at orthotropic bridges.
- Published in:
- Fracture & Structural Integrity, 2009, v. 3, p. 105, doi. 10.3221/IGF-ESIS.09.11
- By:
- Publication type:
- Article
Utilizzo della tensione di picco per la verifica a fatica dei giunti saldati d'angolo con il metodo degli elementi finiti.
- Published in:
- Fracture & Structural Integrity, 2009, v. 3, p. 85, doi. 10.3221/IGF-ESIS.09.09
- By:
- Publication type:
- Article
Verifica a fatica dei giunti saldati sulla base di misure di deformazione locale.
- Published in:
- Fracture & Structural Integrity, 2009, v. 3, p. 64, doi. 10.3221/IGF-ESIS.09.07
- By:
- Publication type:
- Article
Fatigue life estimation in welded joints under multiaxial loadings.
- Published in:
- Fracture & Structural Integrity, 2009, v. 3, p. 46, doi. 10.3221/IGF-ESIS.09.05
- By:
- Publication type:
- Article
Fatigue design of welded joints using the finite element method and the 2007 ASME Div. 2 Master curve.
- Published in:
- Fracture & Structural Integrity, 2009, v. 3, p. 76, doi. 10.3221/IGF-ESIS.09.08
- By:
- Publication type:
- Article
Comportamento a fatica dei giunti saldati in funzione della densità di energia di deformazione locale: influenza dei campi di tensione singolari e non singolari.
- Published in:
- Fracture & Structural Integrity, 2009, v. 3, p. 13, doi. 10.3221/IGF-ESIS.09.02
- By:
- Publication type:
- Article
Specific Features of the Fatigue Fracture of Welded Joints of 34KhN2MA Steel Formed by Electrodes with Different Phase Compositions.
- Published in:
- Materials Science, 2018, v. 54, n. 2, p. 215, doi. 10.1007/s11003-018-0176-1
- By:
- Publication type:
- Article
Identification of Self-Heating Phenomena Under Cyclic Loadings Using Full-Field Thermal and Kinematic Measurements: Application to High-Cycle Fatigue of Seam Weld Joints.
- Published in:
- Experimental Mechanics, 2015, v. 55, n. 4, p. 681, doi. 10.1007/s11340-013-9835-1
- By:
- Publication type:
- Article
Mode I Fracture at Spot Welds in Dual-Phase Steel: An Application of Reverse Digital Image Correlation.
- Published in:
- Experimental Mechanics, 2010, v. 50, n. 8, p. 1199, doi. 10.1007/s11340-009-9323-9
- By:
- Publication type:
- Article
Microstructure and Joint Strength of Magnetic Pulse Welded Aluminum/Aluminum-Coated Steel Joint.
- Published in:
- Materials Transactions, 2021, v. 62, n. 8, p. 1151, doi. 10.2320/matertrans.L-M2021829
- By:
- Publication type:
- Article
Influence of Adhesive in FSW: Investigation on Fatigue Behavior of Welded, Weld-Bonded, and Adhesive-Bonded Joints in Aluminum AA 6082 T6.
- Published in:
- Materials (1996-1944), 2019, v. 12, n. 8, p. 1242, doi. 10.3390/ma12081242
- By:
- Publication type:
- Article
Estudio a fatiga de uniones soldadas a tope. Comparativa y validación de las principales metodologías.
- Published in:
- DYNA - Ingeniería e Industria, 2013, v. 88, n. 2, p. 171, doi. 10.6036/5246
- By:
- Publication type:
- Article
Impact of Fatigue on Tube-to-Tubesheet Welded Joints in Heat Exchanger.
- Published in:
- Journal of Failure Analysis & Prevention, 2022, v. 22, n. 4, p. 1631, doi. 10.1007/s11668-022-01457-y
- By:
- Publication type:
- Article
Corrosion Fatigue Failure Analysis of a Supporting Pipe Weld in Deaerization Plant.
- Published in:
- Journal of Failure Analysis & Prevention, 2015, v. 15, n. 5, p. 744, doi. 10.1007/s11668-015-0012-y
- By:
- Publication type:
- Article
Investigation of the Fatigue Cracking Leading to the Fatal Crash of a Replica Wright Flyer.
- Published in:
- Journal of Failure Analysis & Prevention, 2015, v. 15, n. 1, p. 74, doi. 10.1007/s11668-014-9905-4
- By:
- Publication type:
- Article
Increasing the Corrosion Fatigue Resistance of Welded Joints by High-Frequency Mechanical Peening.
- Published in:
- Strength of Materials, 2018, v. 50, n. 3, p. 443, doi. 10.1007/s11223-018-9988-3
- By:
- Publication type:
- Article
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach.
- Published in:
- Strength of Materials, 2016, v. 48, n. 3, p. 426, doi. 10.1007/s11223-016-9781-0
- By:
- Publication type:
- Article
Effect of High-Frequency Mechanical Peening Conditions on Increase in the Fatigue Resistance of Butt-Welded Joints.
- Published in:
- Strength of Materials, 2014, v. 46, n. 6, p. 777, doi. 10.1007/s11223-014-9611-1
- By:
- Publication type:
- Article
On the application of Gatts equation to the description of fatigue curve.
- Published in:
- Strength of Materials, 2009, v. 41, n. 6, p. 699, doi. 10.1007/s11223-009-9176-6
- By:
- Publication type:
- Article