Works matching DE "WATER pressure"

Results: 2461

An Experimental Method for Fatigue Testing Cast Iron Water Pipes Using Combined Internal Water Pressure and Bending Loads.

Published in:

Experimental Mechanics, 2025, v. 65, n. 5, p. 605, doi. 10.1007/s11340-025-01153-6

By:

John, E. D. A.;
Boxall, J. B.;
Collins, R. P.;
Bowman, E. T.;
Susmel, L.

Publication type:

Article

FLOW FIELD CHARACTERISTICS OF ULTRA-HIGH PRESSURE POST-MIXED ABRASIVE WATER JET APPLIED FOR NON-EXPLOSIVE TUNNEL EXCAVATION.

Published in:

Thermal Science, 2025, v. 29, n. 2A, p. 1131, doi. 10.2298/TSCI2502131Y

By:

Xiu-Li YANG;
Qi TANG;
Xiu-Cheng LIU;
Zheng-Lin GUAN;
Xiao-Guang WU;
Zhuang-Zhuang ZHANG;
Yao-Yao SUN

Publication type:

Article

Experimental Study on the Uplift Correction of Raft Foundations in Saturated Silty Clay.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1415, doi. 10.3390/buildings15091415

By:

Cui, Tengyue;
Shi, Yingguang;
Huang, Feng

Publication type:

Article

Experimental Study on the Influence of Rising Water Levels on the Buoyancy of Building Structure.

Published in:

Water (20734441), 2025, v. 17, n. 9, p. 1377, doi. 10.3390/w17091377

By:

Fan, Zhisong;
Xu, Changjie;
Yang, Kelang;
Xue, Xiuli;
Zeng, Chaofeng

Publication type:

Article

The Role of Ceramics in the Configuration of a New Solar Thermal Collection System for Domestic Hot Water and Heating.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1907, doi. 10.3390/ma18091907

By:

Roviras Miñana, Jordi;
Sarrablo Moreno, Vicente

Publication type:

Article

Study on Moisture Phase Changes in Bread Baking Using a Coupling Model.

Published in:

Foods, 2025, v. 14, n. 9, p. 1649, doi. 10.3390/foods14091649

By:

Zhang, Luo;
Yang, Wei;
Xu, Kai;
Long, Linshuang;
Ye, Hong

Publication type:

Article

Multiphase and Multiphysics Modelling of Rainfall Induced Failure in an Experimental Hillslope.

Published in:

International Journal for Numerical & Analytical Methods in Geomechanics, 2025, v. 49, n. 8, p. 1931, doi. 10.1002/nag.3963

By:

Lazari, Maria;
Camporese, Matteo;
Sanavia, Lorenzo

Publication type:

Article

截断式脉冲水射流流场结构分析.

Published in:

Machine Tool & Hydraulics, 2025, v. 53, n. 5, p. 160, doi. 10.3969/j.issn.1001-3881.2025.05.024

By:

杜利伟;
李倩;
胥良君;
张伟;
黄丹;
李秋萍;
何军

Publication type:

Article

Whole shoot gas exchange and stomatal traits in maize under water drought as related to its growth.

Published in:

Agricultural Engineering International: CIGR Journal, 2025, v. 27, n. 1, p. 1

By:

de Oliveira, Jean Paulo Vitor;
Duarte, Vinícius Politi;
de Castro, Evaristo Mauro;
Magalhães, Paulo Cesar;
Pereira, Fabricio José

Publication type:

Article

Processing complex Egyptian banded iron formation: Geological challenges, experimental approaches, and sustainable innovations.

Published in:

Mineral Processing & Extractive Metallurgy, 2025, v. 134, n. 2, p. 114, doi. 10.1177/25726641251335163

By:

Metwally, Mostafa A.;
Farghaly, Mohamed G.;
Ramadan, A. M.;
Hassan, El-Sayed R. E.

Publication type:

Article

Influence of loading conditions on mechanical behaviors of lunar regolith simulant WHU-1 based on Chang'e-5 returned samples.

Published in:

Acta Geotechnica, 2025, v. 20, n. 5, p. 2327, doi. 10.1007/s11440-025-02553-7

By:

Teng, Yue;
Wang, Shun;
Cui, Yifei;
Pang, Yong

Publication type:

Article

Spatial Identity of Landslide Risk in Eastern Alamut (Case Study: Ovan Lake).

Published in:

Geography & Environmental Hazards, 2024, v. 13, n. 2, p. 186, doi. 10.22067/geoeh.2023.82684.1375

By:

Jafari, Gholam Hassan;
Timaji, Minan

Publication type:

Article

MODEL REPRESENTATION OF THE INFLUENCE OF HYDRAULIC MIXTURE BACKWATER IN THE WASHOUT CHAMBER ON THE HYDRAULIC ELEVATOR LIFTING HEIGHT.

Published in:

Scientific Bulletin of National Mining University, 2025, n. 2, p. 42, doi. 10.33271/nvngu/2025-2/042

By:

Malanchuk, Z.;
Korniyenko, V.;
Malanchuk, Ye.;
Khrystyuk, A.;
Sobczyk, W.

Publication type:

Article

A NEW ROUGH FRACTURE PERMEABILITY MODEL OF COAL WITH INJECTED WATER BASED ON DAMAGED TREE-LIKE BRANCHING NETWORK.

Published in:

Fractals, 2024, v. 32, n. 3, p. 1, doi. 10.1142/S0218348X24500579

By:

LIU, ZHEN;
LI, ZHENG;
YANG, HE;
HAN, JING;
ZHU, MUYAO;
DONG, SHUAI;
YU, ZEHAN

Publication type:

Article

INVESTIGATION ON CONCRETE MICROSTRUCTURAL EVOLUTION AND SLOPE STABILITY BASED ON COUPLED FRACTAL FLUID–STRUCTURE MODEL.

Published in:

Fractals, 2024, v. 32, n. 3, p. 1, doi. 10.1142/S0218348X24500555

By:

YANG, TINGTING;
LIU, YANG;
LIU, GUANNAN;
YU, BOMING;
WEI, MINGYAO

Publication type:

Article

新疆地区不同产水程度煤层气井排采动态与产能特征.

Published in:

Geology & Exploration, 2025, v. 61, n. 2, p. 407, doi. 10.12134/j.dzykt.2025.02.016

By:

陈文圆;
葛燕燕;
孔庆虎;
杨曙光;
李鑫;
张娜;
韦波;
王刚;
王兴刚;
苏红梅

Publication type:

Article

沉管隧道节段接头 Omega 止水带水密性试验研究.

Published in:

China Harbour Engineering, 2025, v. 45, n. 4, p. 79, doi. 10.7640/zggwjs202504013

By:

姬海;
吕勇刚

Publication type:

Article

Model Testing on the Processes, Characteristics, and Mechanism of Water Inrush Induced by Karst Caves Ahead and Alongside a Tunnel.

Published in:

Rock Mechanics & Rock Engineering, 2025, v. 58, n. 5, p. 5363, doi. 10.1007/s00603-025-04414-x

By:

Li, Zhi-Qiang;
Nie, Lichao;
Xue, Yiguo;
Li, Wei;
Fan, Kerui

Publication type:

Article

Determination and Evolution of Dynamic Viscosity Coefficient of Rock Under High Water Pressure and High-Stress Conditions.

Published in:

Rock Mechanics & Rock Engineering, 2025, v. 58, n. 5, p. 4701, doi. 10.1007/s00603-025-04393-z

By:

Jin, Jiefang;
Xiao, Youfeng;
Yang, Daoxue;
Qian, Hao;
Xiong, Huiying;
Peng, Xiaowang;
Yuan, Wei

Publication type:

Article

Water Migration Model for Low-Temperature Saturated Rock Masses.

Published in:

Soil Mechanics & Foundation Engineering, 2025, v. 62, n. 1, p. 48, doi. 10.1007/s11204-025-10027-x

By:

Liu, Naifei;
Li, Ning;
Wang, Shuangjie;
Li, Guofeng;
Song, Zhanping;
Zhang, Lei

Publication type:

Article

Mechanistic Role of Water on the Rate and Selectivity of Fischer-Tropsch Synthesis on Ruthenium Catalysts.

Published in:

Angewandte Chemie, 2013, v. 125, n. 47, p. 12499, doi. 10.1002/ange.201304610

By:

Hibbitts, David D.;
Loveless, Brett T.;
Neurock, Matthew;
Iglesia, Enrique

Publication type:

Article

Influence of Diverse Urban Pressures on Water Characteristics in a Small Eastern Mediterranean Watershed.

Published in:

Aquatic Geochemistry, 2022, v. 28, n. 2, p. 111, doi. 10.1007/s10498-022-09405-w

By:

Maatouk, E.;
Samrani, A. El;
Sawan, R.;
Salameh, R. Bou Ghosn;
Kazpard, V.;
Matar, Z.

Publication type:

Article

Study on Tribological Mechanism for Multi-layer Porous Structure of Diatom Frustule.

Published in:

Microbial Ecology, 2015, v. 69, n. 1, p. 45, doi. 10.1007/s00248-014-0485-3

By:

Meng, Fanming;
Gao, Guixiang;
Jia, Zhihong

Publication type:

Article

An experimental investigation into the potential of employing mixed eco-friendly abrasives during AWJ milling of nickel-based superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 11/12, p. 5143, doi. 10.1007/s00170-024-14401-1

By:

Karkalos, Nikolaos E.;
Karmiris-Obratański, Panagiotis;
Kudelski, Rafał

Publication type:

Article

Assessment of the effectiveness of high-pressure water jet machining generated using self-excited pulsating heads.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 5029, doi. 10.1007/s00170-024-14040-6

By:

Szada-Borzyszkowska, Monika;
Kacalak, Wojciech;
Banaszek, Kamil;
Pude, Frank;
Perec, Andrzej;
Wegener, Konrad;
Królczyk, Grzegorz

Publication type:

Article

An experimental assessment and optimisation of hole quality in Al2024-T3 aluminium alloy during abrasive water jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5199, doi. 10.1007/s00170-024-13009-9

By:

Shi, Hang;
Giasin, Khaled;
Barouni, Antigoni;
Zhang, Zhongyi

Publication type:

Article

Investigation of the influence of the AWJ-specific energy on the cutting kerf profile on aluminium 6082.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 5/6, p. 2799, doi. 10.1007/s00170-023-12841-9

By:

Perotti, Francesco;
Monno, Michele;
Annoni, Massimiliano

Publication type:

Article

Experiments and optimization of the hole EDM electrode's parameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5373, doi. 10.1007/s00170-023-11855-7

By:

Nguyen, Trung-Thanh;
Van, An-Le;
Dang, Xuan-Ba;
Huu, Phan Nguyen

Publication type:

Article

Design and development of a 3D printed water driven spinal posture corrector.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 5/6, p. 1457, doi. 10.1007/s00170-022-10611-7

By:

Ijaz, Malik Kishwat;
Shomenov, Kemel;
Otegen, Darkhan;
Shehab, Essam;
Ali, Md. Hazrat

Publication type:

Article

Airborne acoustic emission of an abrasive waterjet cutting system as means for monitoring the jet cutting capability.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 5/6, p. 2655, doi. 10.1007/s00170-022-10317-w

By:

Copertaro, Edoardo;
Annoni, Massimiliano

Publication type:

Article

Thermal experiments and analysis on adhesive cleaning of work-holding devices by grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 3849, doi. 10.1007/s00170-022-10139-w

By:

Haider, Syed Mustafa;
Khan, Sarmad Ali;
Ali, Muhammad Asad;
Farooq, Muhammad Umar;
Ishfaq, Kashif

Publication type:

Article

Underwater laser micromachining of silicon in pressurized environment.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 7/8, p. 3161, doi. 10.1007/s00170-022-10120-7

By:

Charee, Wisan;
Qi, Huan;
Saetang, Viboon

Publication type:

Article

Erosion field characteristics of depth-control micro-hole profiles machined by abrasive waterjet based on FSI coupling.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 7575, doi. 10.1007/s00170-022-09172-6

By:

Yuan, Yemin;
Chen, Jianfeng;
Gao, Hang

Publication type:

Article

Research on Kerf error of aluminum alloy 6061-T6 cut by abrasive water jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2513, doi. 10.1007/s00170-021-08056-5

By:

Wang, Shu;
Hu, Dong;
Yang, Fengling;
Lin, Peng

Publication type:

Article

MWCNTs doped GFRPs drilling: crosscheck among holes obtained by alternative manufacturing methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 1/2, p. 33, doi. 10.1007/s00170-021-07181-5

By:

Ceritbinmez, Ferhat;
Özkan, Vildan;
Saracoglu, Goksel;
Yapici, Ahmet

Publication type:

Article

Modelling and analysis of abrasive water jet cutting front profile.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 9/10, p. 2829, doi. 10.1007/s00170-021-07014-5

By:

Wang, Shu;
Yang, Fengling;
Hu, Dong;
Tang, Chuanlin;
Lin, Peng

Publication type:

Article

Investigation on impact pressure and residual stress of water jet peening on AL6061-T6 with an inclined surface.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 3/4, p. 1131, doi. 10.1007/s00170-021-06923-9

By:

Zhao, Shusen;
He, Zhanshu;
Li, Yanmin

Publication type:

Article

Utilization of ultrasonically forced pulsating water jet decaying for bone cement removal.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 110, n. 3/4, p. 829, doi. 10.1007/s00170-020-05892-9

By:

Nag, Akash;
Hloch, Sergej;
Dixit, Amit Rai;
Pude, Frank

Publication type:

Article

An investigation into the abrasive waterjet milling circular pocket on titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 11/12, p. 4503, doi. 10.1007/s00170-020-05294-x

By:

Yuan, Yemin;
Chen, Jianfeng;
Gao, Hang;
Wang, Xuanping

Publication type:

Article

Experimental investigations on depth of penetration and surface integrity in AZ91/Al2O3 nano-composites cut by abrasive water jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 1/2, p. 747, doi. 10.1007/s00170-020-05069-4

By:

Niranjan, C. A.;
Srinivas, S.;
Ramachandra, M.

Publication type:

Article

Evolutionary optimization of jet lag in the abrasive water jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 101, n. 9-12, p. 3131, doi. 10.1007/s00170-018-3181-5

By:

Gostimirovic, Marin;
Pucovsky, Vladimir;
Sekulic, Milenko;
Rodic, Dragan;
Pejic, Vlastimir

Publication type:

Article

Research on arc cutting mechanism and procedure of flux-cored cutting wire in water.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 98, n. 9-12, p. 2895, doi. 10.1007/s00170-018-2438-3

By:

Li, Wenhang;
Zhao, Jingyu;
Wang, Jiayou;
Wang, Jianxin;
Jia, Haifeng;
Li, Zexin;
Maksimov, Sergii Yuri

Publication type:

Article

Experimental investigation and application on the cutting performance of cutting head for rock cutting assisted with multi-water jets.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 94, n. 5-8, p. 2715, doi. 10.1007/s00170-017-1072-9

By:

Liu, Songyong;
Ji, Huifu;
Han, Dongdong;
Guo, Chuwen

Publication type:

Article

Thermodynamic response functions and Stokes-Einstein breakdown in superheated water under gigapascal pressure.

Published in:

Theoretical Chemistry Accounts: Theory, Computation, & Modeling, 2023, v. 142, n. 5, p. 1, doi. 10.1007/s00214-023-02991-0

By:

Dueby, Shivam;
Maiti, Archita;
Dubey, Vikas;
Galamba, Nuno;
Daschakraborty, Snehasis

Publication type:

Article

The importance of conduction versus convection in heat pulse sap flow methods.

Published in:

Tree Physiology, 2020, v. 40, n. 5, p. 683, doi. 10.1093/treephys/tpaa009

By:

Forster, Michael A

Publication type:

Article

Experimental study of the types of cavitation by air seeding using light microscopy.

Published in:

Tree Physiology, 2015, v. 35, n. 12, p. 1325, doi. 10.1093/treephys/tpv060

By:

Fanyi Shen;
Yanxia Cheng;
Li Zhang;
Rongfu Gao;
Xuemeng Shao

Publication type:

Article

Causes and consequences of gas bubble trauma on fish gill function.

Published in:

Journal of Comparative Physiology B: Biochemical, Systemic & Environmental Physiology, 2024, v. 194, n. 5, p. 739, doi. 10.1007/s00360-024-01538-4

By:

Pleizier, Naomi K.;
Brauner, Colin J.

Publication type:

Article

A combined analytical-numerical method for groundwater inflow into circular tunnels in drained conditions.

Published in:

Hydrogeology Journal, 2021, v. 29, n. 7, p. 2529, doi. 10.1007/s10040-021-02399-9

By:

Wu, Jian;
Zhou, Zhifang;
Zhuang, Chao

Publication type:

Article

Evolution of the hydrogeological structure and disaster-generating mechanisms of landslides in loess slopes of the southern Jingyang Plateau, Shaanxi, China.

Published in:

Hydrogeology Journal, 2020, v. 28, n. 6, p. 2223, doi. 10.1007/s10040-020-02195-x

By:

Wang, Wei;
Li, Jinlong;
Li, Xinyan;
Wang, Yu

Publication type:

Article

Constraining a density-dependent flow model with the transient electromagnetic method in a coastal aquifer in Mexico to assess seawater intrusion.

Published in:

Hydrogeology Journal, 2019, v. 27, n. 8, p. 2955, doi. 10.1007/s10040-019-02024-w

By:

Torres-Martinez, Juan Antonio;
Mora, Abrahan;
Ramos-Leal, José Alfredo;
Morán-Ramírez, Janete;
Arango-Galván, Claudia;
Mahlknecht, Jürgen

Publication type:

Article