Works about UNSATURATED polyesters

Results: 529

Thermal Conductivity of Unsaturated Polyester Resin Bio-composites with Agricultural Waste.

Published in:

Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2025, v. 35, n. 2, p. 207, doi. 10.18280/rcma.350202

By:

Hameed, Abdul Adeem Zaily;
Abdulghani, Salam O.;
Khalaf, Rafid Hamad

Publication type:

Article

Characterization of Unsaturated Polyester Composites Reinforced with Date Palm Seed Particles: Mechanical, FTIR, and SEM Analysis.

Published in:

Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2025, v. 35, n. 2, p. 311, doi. 10.18280/rcma.350213

By:

Mohsen, Tariq Naji;
Bdaiwi, Waleed

Publication type:

Article

Glass Fiber Reinforced Composite Produced with a Novel Matrix of Bio-based Unsaturated Polyester Resin made from 2,5-Furan Dicarboxylic Acid and Isosorbide.

Published in:

Journal of Polymers & the Environment, 2025, v. 33, n. 6, p. 2798, doi. 10.1007/s10924-025-03539-y

By:

Akbari, Samira;
Joseph, Jeevan Tom;
Skrifvars, Mikael;
Ramamoorthy, Sunil Kumar;
Åkesson, Dan

Publication type:

Article

A drive towards green – Unsaturated polyester resins: A critical review of bio-based building blocks and reactive diluents.

Published in:

Polymers from Renewable Resources, 2025, v. 16, n. 2/3, p. 123, doi. 10.1177/20412479251338506

By:

AbdulRahman, Jeemol Poovathungal;
Reghunadhan Nair, Chethrappilly Padmanabhan;
Mathew, Suresh

Publication type:

Article

Free Vibration and Mechanical Characteristics of Palmyra Palm Leaf Stalk Fibers Reinforced Unsaturated Polyester Composites.

Published in:

BioResources, 2025, v. 20, n. 2, p. 3826, doi. 10.15376/biores.20.2.3826-3837

By:

Dharmalingam, Shanmugam;
Rama, Thirumurugan;
Kannusamy, Ashok Sayalkudi;
Manickavasagam, Thiruchitrambalam;
Mahalingam, Jayaraj;
Palanisamy, Sivasubramanian;
Santulli, Carlo;
Durairaj, Thresh Kumar;
Al-Farraj, Saleh A.

Publication type:

Article

Hyperbranched polyester improves the dispersion of SiO<sub>2</sub> for enhancing the mechanical properties of DLP 3D printing polyurethane acrylate.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 5, p. 2268, doi. 10.1002/pen.27144

By:

Zhao, Xiaoliang;
Jiao, Hua;
Yao, Yijun;
Du, Bin;
Zhao, Kang

Publication type:

Article

Acoholysis behavior of PET waste with hybrid fibers and their application in the synthesis of unsaturated resins.

Published in:

Journal of Polymer Research, 2025, v. 32, n. 4, p. 1, doi. 10.1007/s10965-025-04333-z

By:

Ou, Juhua;
Dai, Zilin;
Kong, Zhenxing;
Yang, Rui

Publication type:

Article

Orientation control of magnetically functionalized graphene oxide nanohybrids in unsaturated polyester resin with enhanced mechanical, thermal, and fire safety performance.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6427, doi. 10.1002/pc.29369

By:

Tang, Tao;
Huo, Junjie;
Li, Weijin;
Lin, Chubin;
Yu, Fuhao;
Wang, Bibo;
Dai, Kang

Publication type:

Article

Development of Recycled PET Core Materials for the Manufacturing of Fiber Reinforced Polymeric Composites in Sandwich Form.

Published in:

Macromolecular Symposia, 2024, v. 413, n. 4, p. 1, doi. 10.1002/masy.202400110

By:

Başer, Gülnur;
Kabaca, Rümeysa Zeynep;
Kılıç, Sefa Enes

Publication type:

Article

Novel Biobased Polyester Resins for Wood Applications: Morphological, Thermal, and Chemical Characterization.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100229

By:

Malletzidou, Lamprini;
Papadopoulou, Electra;
Papadopoulos, Lazaros;
Markessini, Charles;
Bikiaris, Dimitrios N.;
Chrissafis, Konstantinos;
Vourlias, George

Publication type:

Article

Optimization of Fiber Content and Alkali Treatment on Sound Damping Performances of Kenaf Core/Unsaturated Polyester Composites.

Published in:

Macromolecular Symposia, 2020, v. 391, n. 1, p. 1, doi. 10.1002/masy.201900179

By:

Vicarneltor, David Natanael;
Ujianto, Onny;
Setijotomo, Hendro Sat;
Nurindah

Publication type:

Article

Functionalized Unsaturated Polyester as Electrical Insulation Varnish.

Published in:

Macromolecular Chemistry & Physics, 2024, v. 225, n. 13, p. 1, doi. 10.1002/macp.202400127

By:

Gümüş, Selinay;
Aksoy, Kaan;
Aytac, Ayse

Publication type:

Article

Switchable Copolymerization of Maleic Anhydride/Epoxides/Lactide Mixtures: A Straightforward Approach to Block Copolymers with Unsaturated Polyester Sequences.

Published in:

Macromolecular Chemistry & Physics, 2022, v. 223, n. 16, p. 1, doi. 10.1002/macp.202200079

By:

Wang, Yu‐Bo;
Wang, Ming‐Qian;
Shi, Yi‐Bo;
Chen, Xiao‐Lu;
Song, Dong‐Po;
Li, Yue‐Sheng;
Wang, Bin

Publication type:

Article

Synthesis of Unsaturated Nonionic Poly(ester-sulfones) via Acyclic Diene Metathesis (ADMET) Polymerization and Anode-Selective Electrophoretic Deposition.

Published in:

Macromolecular Chemistry & Physics, 2016, v. 217, n. 23, p. 2595, doi. 10.1002/macp.201600277

By:

Kawarazaki, Isamu;
Takasu, Akinori

Publication type:

Article

Networks Based on Poly(α-methylene-δ-valerolactone- co-δ-valerolactone): Crosslinking Through Free-Radical Vinyl Copolymerization.

Published in:

Macromolecular Chemistry & Physics, 2014, v. 215, n. 5, p. 426, doi. 10.1002/macp.201300674

By:

Stöhr, Olesja;
Ritter, Helmut

Publication type:

Article

Evaluation of low dielectric constant epoxy vinyl ester resin modified by hyperbranched unsaturated polyester of acroleic acid and n-hexanoic acid co-blocking.

Published in:

Journal of Materials Science: Materials in Electronics, 2020, v. 31, n. 12, p. 9176, doi. 10.1007/s10854-020-03447-y

By:

Shi, Jiahao;
Zhang, Xiaorui;
Liu, Lizhu;
Weng, Ling;
Yan, Shaohui;
Zhang, Siqi

Publication type:

Article

Enzymatic synthesis and characterization of muconic acid‐based unsaturated polymer systems.

Published in:

Polymer International, 2021, v. 70, n. 5, p. 555, doi. 10.1002/pi.6143

By:

Maniar, Dina;
Fodor, Csaba;
Adi, Indra Karno;
Woortman, Albert JJ;
Dijken, Jur;
Loos, Katja

Publication type:

Article

Deciphering the structure of itaconate‐based unsaturated polyester resins by high resolution mass spectrometry.

Published in:

Polymer International, 2020, v. 69, n. 11, p. 1140, doi. 10.1002/pi.6049

By:

Molina, Julien;
Mahmoud, Ziad;
Hubert‐Roux, Marie;
Azaroual, Nathalie;
Afonso, Carlos;
Schuller, Anne‐Sophie;
Rolando, Christian

Publication type:

Article

Influence of initiator on the curing of unsaturated polyester resin at 100 °C.

Published in:

Polymer International, 2020, v. 69, n. 11, p. 1089, doi. 10.1002/pi.5934

By:

Delaite, Christelle;
Bistac, Sophie;
Dreyer, Elodie;
Schuller, Anne‐Sophie

Publication type:

Article

Development of high‐modulus thermoset materials based on bioglycerol.

Published in:

Polymer International, 2019, v. 68, n. 5, p. 915, doi. 10.1002/pi.5781

By:

Gómez, Claudia L;
Echeverri, David A;
Inciarte, Helen C;
Rios, Luis A

Publication type:

Article

CO<sub>2</sub> laser-air cutting of glass-fibre-reinforced unsaturated polyester (GFRUP): an experimental investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 9/10, p. 2627, doi. 10.1007/s00170-021-07180-6

By:

Rejani, Ali Rezaei;
Hashemzadeh, Majid

Publication type:

Article

Influence of Kaolin particulate and Luffa cylindrica fiber on the mechanical properties polyester matrix.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 1/2, p. 139, doi. 10.1007/s00170-021-07442-3

By:

Yaro, Aliyu;
Kuburi, Laminu;
Moshood, Musa Abiodun

Publication type:

Article

Reduction in process-induced shape distortion of C-shaped composite parts using micro silica particles.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 103, n. 9-12, p. 4747, doi. 10.1007/s00170-019-03981-y

By:

Raza, Muhammad;
Shaker, Khubab;
Nawab, Yasir;
Saouab, Abdelghani

Publication type:

Article

Biotechnological Production of Fumaric Acid by Rhizopus arrhizus —Reaching Industrially Relevant Final Titers.

Published in:

Fermentation (Basel), 2023, v. 9, n. 7, p. 588, doi. 10.3390/fermentation9070588

By:

Kuenz, Anja;
Eidt, Laslo;
Prüße, Ulf

Publication type:

Article

Recent Advances on the Production of Itaconic Acid via the Fermentation and Metabolic Engineering.

Published in:

Fermentation (Basel), 2023, v. 9, n. 1, p. 71, doi. 10.3390/fermentation9010071

By:

Zhang, Renwei;
Liu, Huan;
Ning, Yuchen;
Yu, Yue;
Deng, Li;
Wang, Fang

Publication type:

Article

Filler Type and Particle Distribution Effect on Some Properties of Polymer Composites.

Published in:

Celal Bayar University Journal of Science, 2021, v. 17, n. 1, p. 79, doi. 10.18466/cbayarfbe.787883

By:

Poyraz, Bayram;
Eren, Şevki;
Subaşı, Serkan

Publication type:

Article

Experimental Investigation on Flexural Strength Enhancement of Eucalyptus based Bamboo Composite Deck Board.

Published in:

Cogent Engineering, 2023, v. 10, n. 1, p. 1, doi. 10.1080/23311916.2023.2188688

By:

Yimer, Yirga Z.;
Gualu, Alemayehu G.;
Amede, Ermias A.;
Hailemariam, Leule M.

Publication type:

Article

Mechanical properties of particleboard made from leather shavings and waste papers.

Published in:

Cogent Engineering, 2022, v. 9, n. 1, p. 1, doi. 10.1080/23311916.2022.2076350

By:

Kibet, Tabitha;
Tuigong, David R.;
Maube, Obadiah;
Mwasiagi, Josphat I.

Publication type:

Article

A Comparative Study of Unsaturated Resin/Graphite Microchip and Nano-Graphite Microchip Composites Prepared by Electric Field.

Published in:

Integrated Ferroelectrics, 2020, v. 206, n. 1, p. 173, doi. 10.1080/10584587.2020.1728638

By:

Zhang, Hongyan;
Wang, Haiquan

Publication type:

Article

Optimization of jute nonwoven fabric reinforcement for the development of a rigid composite.

Published in:

Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837241288886

By:

Lakshmanan, Ammayappan;
Chakraborty, Sujay

Publication type:

Article

Analysis of the strength of joints in fabric/ unsaturated polyester composites.

Published in:

Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837241228268

By:

El Messiry, Magdi;
El-Tarfawy, Shaimaa;
El Deeb, Rania

Publication type:

Article

An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites.

Published in:

Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-44088-5

By:

VarunKumar, T.;
Jayaraj, M.;
Nagaprasad, N.;
Tesfaye, Jule Leta;
Shanmugam, R.;
Krishnaraj, Ramaswamy

Publication type:

Article

An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites.

Published in:

Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-44088-5

By:

VarunKumar, T.;
Jayaraj, M.;
Nagaprasad, N.;
Tesfaye, Jule Leta;
Shanmugam, R.;
Krishnaraj, Ramaswamy

Publication type:

Article

Transparent wood composite prepared from two commercially important tropical timber species.

Published in:

Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-42242-7

By:

Anish, M. C.;
Pandey, Krishna K.;
Kumar, Rakesh

Publication type:

Article

Nonmigratory Phosphate Methacrylate.

Published in:: CoatingsTech, 2024, v. 21, n. 2, p. 32
Publication type:: Article

Notizen aus der Chemie.

Published in:

Nachrichten aus der Chemie, 2024, v. 72, n. 5, p. 48, doi. 10.1002/nadc.20244142928

By:

Barra, Lena;
Delaittre, Guillaume;
Dierkes, Georg;
Hoch, Constantin;
Jahn, Ullrich;
Meermann, Björn;
Strub, Erik;
Tambornino, Frank

Publication type:

Article

Experimental Investigation of Hot Alkaline Treatment on Strength Characteristics of Cantala Fiber Reinforced Composites and Microcrystalline Cellulose.

Published in:

EnvironmentAsia, 2023, v. 16, n. 1, p. 146, doi. 10.14456/ea.2023.13

By:

Sakuri, Sakuri;
Susanto, T. D.;
Sugiantoro, Bambang;
Shidiq, M. Agus

Publication type:

Article

Improving hydrophobicity and compatibility between kenaf fiber and polymer composite by surface treatment with inorganic nanoparticles.

Published in:

Arabian Journal of Chemistry, 2022, v. 15, n. 11, p. N.PAG, doi. 10.1016/j.arabjc.2022.104233

By:

Mohammed, Mohammed;
Rahman, Rozyanty;
Mohammed, Aeshah M.;
Betar, Bashir O.;
Osman, Azlin F.;
Adam, Tijjani;
Dahham, Omar S.;
Gopinath, Subash C.B.

Publication type:

Article

Preparation of unsaturated polyester Ce(IV) phosphate by plastic waste bottles and its application for removal of Malachite green dye from water samples.

Published in:

Arabian Journal of Chemistry, 2013, v. 6, n. 4, p. 361, doi. 10.1016/j.arabjc.2010.10.012

By:

Khan, Asif Ali;
Ahmad, Rais;
Khan, Anish;
Mondal, Pijush Kanti

Publication type:

Article

Physicochemical Principles of Synthesis and Modification of Unsaturated Polyester-Polyvinyl Chloride Composites and the Properties of Materials Derived from Them.

Published in:

International Journal of Polymer Science, 2019, p. 1, doi. 10.1155/2019/2547384

By:

Katruk, Diana;
Levytskyi, Volodymyr;
Khromyak, Ulyana;
Moravskyi, Volodymyr;
Masyuk, Andrii

Publication type:

Article

Influence of processing variables on quality of unsaturated polyester/E-glass fiber composites manufactured by double-bag progressive compression method.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2018, v. 10, n. 9, p. 1, doi. 10.1177/1687814018798531

By:

Chih-Yuan Chang;
Wei-Ru Chen

Publication type:

Article

F-12 芳纶的不饱和聚酯树脂表面改性研究.

Published in:

Wool Textile Journal, 2019, v. 47, n. 8, p. 35, doi. 10.19333/j.mfkj.2018100250805

By:

王翔华;
成玲;
李美真

Publication type:

Article

SMART ADHESION BY SURFACE TREATMENT Experimental and Theoretical Insights.

Published in:

Thermal Science, 2019, v. 23, n. 4, p. 2355, doi. 10.2298/TSCI1904355W

By:

WANG, Chunxia;
XU, Lin;
LIU, Guoliang;
REN, Yu;
LV, Jinchun;
GAO, Dawei;
LU, Zhenqian

Publication type:

Article

Effect of Water Absorption on Flexural Properties of Kenaf/Glass Fibres Reinforced Unsaturated Polyester Hybrid Composites Rod.

Published in:

Pertanika Journal of Science & Technology, 2022, v. 30, n. 1, p. 397, doi. 10.47836/pjst.30.1.22

By:

Alaseel, Bassam Hamid;
Nainar, Mohamed Ansari Mohamed;
Nordin, Noor Afeefah;
Yahya, Zainudin;
Rahim, Mohd Nazim Abdul

Publication type:

Article

Extraction of Natural Fibers by High-Speed Blender to Produce Cellulose Sheet Composite.

Published in:

International Review of Mechanical Engineering, 2019, v. 13, n. 12, p. 691, doi. 10.15866/ireme.v13i12.17586

By:

Rochardjo, Heru S. B.;
Jamasri;
Ferriawan Yudhanto

Publication type:

Article

Polymerization Inhibitors and Promoters for Unsaturated Polyester Resins; Use of Solid Phase MicroExtraction and Gas Chromatography Coupled to Mass Spectrometry for the Determination of 4-tert-Butyl Catechol and Acetylacetone.

Published in:

Eurasian Journal of Analytical Chemistry, 2017, v. 12, n. 6, p. 939, doi. 10.12973/ejac.2017.00223a

By:

Dugheri, Stefano;
Gentili, Matteo;
Bonari, Alessandro;
Pompilio, Ilenia;
Mucci, Nicola;
Montalti, Manfredi;
Arcangeli, Giulio

Publication type:

Article

Porous functional poly(unsaturated polyester- co-glycidyl methacrylate- co-divinylbenzene) polyHIPE beads through w/o/w multiple emulsions: preparation, characterization and application.

Published in:

e-Polymers, 2014, v. 14, n. 1, p. 65, doi. 10.1515/epoly-2013-0071

By:

Mert, Emine Hilal;
Yıldırım, Hüseyin

Publication type:

Article

Quantitative assessment of dispersion stability and processing parameters in graphene‐enhanced unsaturated polyester resins: Effect of mixing techniques.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 4, p. 2133, doi. 10.1002/pen.27145

By:

Mazaheri Karvandian, Farnaz;
Hubert, Pascal

Publication type:

Article

Heat transfer prediction during curing of thick part of unsaturated polyester resin containing nanoparticles of graphene oxide and modified graphene oxide.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 1, p. 363, doi. 10.1002/pen.26553

By:

Yavari, Neda;
Bashipour, Fatemeh;
Poorabdollah, Mehdi

Publication type:

Article

Enhancing mechanical and electrical properties of phthalic anhydride‐based unsaturated polyester resin by structural modification using methylhexahydrophthalic anhydride.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 7, p. 1912, doi. 10.1002/pen.26333

By:

Pham, Anh‐Tuan;
Do, Khanh Duy;
Ha, Huong Thu;
Mai, Quan Doan;
Tran, Dieu Vinh

Publication type:

Article