Works matching DE "THERMAL stress cracking"

Results: 139

Evaluating mechanical and thermodynamic properties of asphalt mixtures containing anti freezing agents against low temperature cracking.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-11381-4

By:

Hamedi, Gholam Hossein;
Dehnad, Mohammad Hosein;
Asadi, Amir Hossein

Publication type:

Article

Laser Powder Bed Fusion Additive Manufacturing of a CoCrFeNiCu High-Entropy Alloy: Processability, Microstructural Insights, and (In Situ) Mechanical Behavior.

Published in:

Materials (1996-1944), 2025, v. 18, n. 13, p. 3071, doi. 10.3390/ma18133071

By:

Burgio, Vito;
Moeini, Ghazal

Publication type:

Article

A uniaxial tensile constitutive equationof high-ductility cementitious composites.

Published in:

Journal of Southeast University (English Edition), 2019, v. 35, n. 4, p. 476, doi. 10.3969/j.issn.1003-7985.2019.04.010

By:

Guo Liping;
Yang Yanan;
Chen Bo

Publication type:

Article

CRACK CONTROL IN RC TANK WALLS ACCORDING TO PN-EN 1992-3.

Published in:

Technical Transactions / Czasopismo Techniczne, 2016, v. 2-B, p. 225, doi. 10.4467/2353737XCT.16.171.5782

By:

ZYCH, MARIUSZ

Publication type:

Article

Structural and rheological property relationship of bimodal polyethylene with improved environment stress cracking resistance.

Published in:

Polymer Science -- Series A, 2014, v. 56, n. 5, p. 671, doi. 10.1134/S0965545X14050058

By:

Chen, Yang;
Lei, Yanzhou;
Zou, Huawei;
Liang, Mei;
Cao, Ya

Publication type:

Article

The effect of thermal stress on crack-inclusion problem in inhomogeneous superconducting cylinder.

Published in:

European Physical Journal B: Condensed Matter, 2023, v. 96, n. 11, p. 1, doi. 10.1140/epjb/s10051-023-00619-7

By:

Zhao, Yufeng;
Yang, Yifan

Publication type:

Article

Failure Prediction of an Airfoil-Type Crack in Thermoelectric Coupling Materials.

Published in:

International Journal of Applied Mechanics, 2024, v. 16, n. 9, p. 1, doi. 10.1142/S1758825124500996

By:

Chao, Ching-Kong;
Liao, Yi-Lun;
Ma, Chien-Ching;
Shen, Ming-Ho

Publication type:

Article

Effects of Temperature and Layer Thickness on the Static and Dynamic Behaviors of Biocomposite Materials with Interleaved Viscoelastic Layers.

Published in:

International Journal of Applied Mechanics, 2024, v. 16, n. 4, p. 1, doi. 10.1142/S1758825124500431

By:

Meddeb, Firas;
El Mahi, Abderrahim;
Rebiere, Jean-Luc;
Daoud, Hajer;
Ben Souf, Mohamed Amine;
Haddar, Mohamed

Publication type:

Article

The growth mechanism of oxide scale with Pt on NiCoCrAlY coating in water vapor at 1050∘C.

Published in:

Modern Physics Letters B, 2021, v. 35, n. 6, p. N.PAG, doi. 10.1142/S0217984921501116

By:

Hua, Chen;
Song, Peng;
Huang, Taihong;
He, Xuan;
Li, Chao;
Zhai, Ruixiong;
Li, Qing;
Huang, Wenlang;
Lu, Jiansheng

Publication type:

Article

An analytical study on cracking directions and damage in thermal fatigue crazing subjected to variable amplitude loadings.

Published in:

Journal of Materials Science, 2014, v. 49, n. 16, p. 5546, doi. 10.1007/s10853-014-8249-5

By:

Lei, Bai-Mao;
Tran, Van-Xuan;
Taheri, Saïd;
Wan, Li;
Zhou, Yu

Publication type:

Article

Desiccation cracking of earthen sites in archaeology museum – A viewpoint of chemical potential difference of water content.

Published in:

2015

By:

Luo, Xilian;
Gu, Zhaolin;
Yu, Chuck

Publication type:

Editorial

Modelling the effect of plastic sheet curing on early age temperature development in concrete pavement.

Published in:

International Journal of Pavement Engineering, 2020, v. 21, n. 5, p. 559, doi. 10.1080/10298436.2018.1502431

By:

Ren, Dongya;
Houben, Lambert

Publication type:

Article

A case study on crack propagation law of cement stabilised macadam base.

Published in:

International Journal of Pavement Engineering, 2020, v. 21, n. 4, p. 516, doi. 10.1080/10298436.2018.1492135

By:

Gao, Junqi;
Jin, Peipei;
Sheng, Yuxiang;
An, Ping

Publication type:

Article

Structural movement and defects in traditional Scottish residential property.

Published in:

Journal of Building Survey, Appraisal & Valuation, 2013, v. 2, n. 2, p. 149, doi. 10.69554/ikez2842

By:

Gibbon, David

Publication type:

Article

The significance of cracks in low-rise buildings.

Published in:

Journal of Building Survey, Appraisal & Valuation, 2013, v. 2, n. 2, p. 107, doi. 10.69554/fhsm4397

By:

Johnson, Roger

Publication type:

Article

CURE-ON-DEMAND, Ultra-High-Solid Nonskid Coatings: Through Frontal Polymerization.

Published in:

CoatingsTech, 2023, v. 20, n. 1, p. 34

By:

GARY, DANIEL P.;
NGO, DOUGLAS;
BUI, AMBER;
BELGODERE, JORGE A.;
POJMAN, JOHN A.

Publication type:

Article

SEM-Guided Finite Element Simulation of Thermal Stresses in Multilayered Suspension Plasma-Sprayed TBCs.

Published in:

Coatings (2079-6412), 2024, v. 14, n. 1, p. 123, doi. 10.3390/coatings14010123

By:

Amer, Mohamed;
Abdelgawad, Ahmed;
Curry, Nicholas;
Arshad, Muhammad;
Hayat, Qamar;
Janik, Vit;
Nottingham, Jon;
Bai, Mingwen

Publication type:

Article

Surface Morphological Features of Molybdenum Irradiated by a Single Laser Pulse.

Published in:

Coatings (2079-6412), 2020, v. 10, n. 1, p. 67, doi. 10.3390/coatings10010067

By:

Montanari, Roberto;
Pakhomova, Ekaterina;
Rossi, Riccardo;
Richetta, Maria;
Varone, Alessandra

Publication type:

Article

Investigation of interactions among collinear Griffith cracks situated in a functionally graded medium under thermo-mechanical loading.

Published in:

Journal of Thermal Stresses, 2021, v. 44, n. 4, p. 433, doi. 10.1080/01495739.2020.1843379

By:

Singh, Ritika;
Das, S.

Publication type:

Article

Effect of thermal stress on crack growth in inhomogeneous cylindrical superconductor.

Published in:

Journal of Thermal Stresses, 2019, v. 42, n. 2, p. 254, doi. 10.1080/01495739.2018.1467742

By:

Yufeng Zhao;
Hongshan Liu;
Chi Xu

Publication type:

Article

Effect of point heat source on growth of subsurface crack induced in brittle material machining.

Published in:

Journal of Thermal Stresses, 2017, v. 40, n. 1, p. 72, doi. 10.1080/01495739.2016.1249583

By:

Chen, Jianbin;
Fang, Qihong;
Du, Jianke;
Xie, Chao

Publication type:

Article

Transient thermal fracture analysis of a penny-shaped magnetic and dielectric crack in a magnetoelectroelastic cylinder.

Published in:

Journal of Thermal Stresses, 2016, v. 39, n. 11, p. 1428, doi. 10.1080/01495739.2016.1216066

By:

Liu, L. L.;
Feng, W. J.;
Liu, J. X.

Publication type:

Article

Effects of thermal load on wheel–rail contacts: A review.

Published in:

Journal of Thermal Stresses, 2016, v. 39, n. 11, p. 1389, doi. 10.1080/01495739.2016.1216060

By:

Srivastava, Jay Prakash;
Sarkar, Prabir Kumar;
Ranjan, Vinayak

Publication type:

Article

Investigation Methods for Thermal Shock Crack Problems of Functionally Graded Materials–Part II: Combined Analytical-Numerical Method.

Published in:

Journal of Thermal Stresses, 2014, v. 37, n. 3, p. 325, doi. 10.1080/01495739.2013.839854

By:

Zhang, Yanyan;
Guo, Licheng;
Noda, Naotake

Publication type:

Article

Investigation Methods for Thermal Shock Crack Problems of Functionally Graded Materials–Part I: Analytical Method.

Published in:

Journal of Thermal Stresses, 2014, v. 37, n. 3, p. 292, doi. 10.1080/01495739.2013.839853

By:

Guo, Licheng;
Noda, Naotake

Publication type:

Article

Experimental Study on the Relationship between Direction of Crack Propagation and Thermal Stress Distribution in Laser Cleaving Process for Glass Substrate.

Published in:

Journal of Laser Micro / Nanoengineering, 2019, v. 14, n. 2, p. 161, doi. 10.2961/jlmn.2019.02.0008

By:

Yuki Nakajima;
Keiji Yamada;
Kazuki Fukushima;
Ryutaro Tanaka;
Katsuhiko Sekiya

Publication type:

Article

Thermal Deformation of Granite under Different Temperature and Pressure Pathways.

Published in:

Advances in Materials Science & Engineering, 2019, p. 1, doi. 10.1155/2019/7869804

By:

Zhao, Peng;
Feng, Zi-jun

Publication type:

Article

Numerical Simulation of Microwave Assisted Laser Melting Alumina.

Published in:

International Review of Mechanical Engineering, 2015, v. 9, n. 5, p. 429, doi. 10.15866/ireme.v9i5.2042

By:

Belcadi, M.;
Gueraoui, K.;
El Rhaleb, H.;
Driouich, M.;
Dhiri, A.

Publication type:

Article

Model Experiments on Thermally-induced Cracking of the Mass Concrete in Prototype Bridge Structures.

Published in:

Journal of Residuals Science & Technology, 2017, v. 14, n. 3, p. 500, doi. 10.14355/jrst.2017.1403.049

By:

Xianzheng Yu;
Jianyun Chen;
Qiang Xu;
Zhi Zhou;
Yu Shen

Publication type:

Article

A parameter optimization method for stress simulation of double horse head pumping unit dynamics model with cable.

Published in:

Journal of Vibroengineering, 2017, v. 19, n. 8, p. 5810, doi. 10.21595/jve.2017.18749

By:

Long Qing Zou;
Gui Juan Chen;
Qian Zou;
Hai Yang Zhao

Publication type:

Article

Thermal stress analysis of cracks around the joints of the side wall of cast-in-place reinforced concrete open channels.

Published in:

Paddy & Water Environment, 2024, v. 22, n. 2, p. 223, doi. 10.1007/s10333-023-00963-5

By:

Ikadatsu, Haruka;
Ogata, Hidehiko;
Hyodo, Masahiro;
Ishigami, Akio

Publication type:

Article

Failure Mechanism of the SnAgCu/SnPb Mixed Soldering Process in a Ball Grid Array Structure.

Published in:

Journal of Electronic Materials, 2020, v. 49, n. 10, p. 6223, doi. 10.1007/s11664-020-08372-8

By:

Gao, Li-Yin;
Cui, Xian-Wei;
Tian, Fei-Fei;
Liu, Zhi-Quan

Publication type:

Article

Overlap joining of EN AW 7075 with laser beam welding in vacuum.

Published in:

Materialwissenschaft und Werkstoffechnik, 2025, v. 56, n. 3, p. 376, doi. 10.1002/mawe.202400205

By:

Gerhards, B.O.;
Gerhards, B.;
Macke, B.;
Häuser, P.;
Schleser, M.;
Liebe, P.

Publication type:

Article

A method to determine the slip systems in BGA lead-free solder joints during thermal fatigue.

Published in:

Journal of Materials Science: Materials in Electronics, 2018, v. 29, n. 9, p. 7501, doi. 10.1007/s10854-018-8741-9

By:

Tan, Shihai;
Han, Jing;
Wang, Yan;
Guo, Fu

Publication type:

Article

Crack generation in electroless nickel plating layers on copper-metallized silicon nitride substrates during thermal cycling.

Published in:

Journal of Materials Science: Materials in Electronics, 2017, v. 28, n. 11, p. 8278, doi. 10.1007/s10854-017-6541-2

By:

Fukuda, Shinji;
Shimada, Kazuhiko;
Izu, Noriya;
Miyazaki, Hiroyuki;
Hirao, Kiyoshi;
Iwakiri, Shoji

Publication type:

Article

Crack-inclusion problem in a superconducting cylinder under pulsed field magnetization.

Published in:

Acta Mechanica, 2025, v. 236, n. 6, p. 3385, doi. 10.1007/s00707-025-04337-2

By:

Zhao, Yufeng;
Yu, Jing

Publication type:

Article

Thermal shock fracture of an elastic half-space with a subsurface penny-shaped crack via fractional thermoelasticity.

Published in:

Acta Mechanica, 2018, v. 229, n. 12, p. 4875, doi. 10.1007/s00707-018-2252-x

By:

Zhang, Xue-Yang;
Chen, Zeng-Tao;
Li, Xian-Fang

Publication type:

Article

Precooling Massive Concrete Mixes Using Cooled Aggregates or Chilled Water.

Published in:

International Review of Civil Engineering, 2023, v. 14, n. 4, p. 331, doi. 10.15866/irece.v14i4.21805

By:

Alamayreh, Malik I.;
Alahmer, Ali;
Bazlamit, Subhi M.;
Younes, Mai Bani

Publication type:

Article

Thermal Cracking Analysis during Pipe Cooling of Mass Concrete Using Particle Flow Code.

Published in:

Advances in Materials Science & Engineering, 2016, p. 1, doi. 10.1155/2016/5976862

By:

Li, Liang;
Liu, Xinghong;
Dao, Vinh T. N.;
Cheng, Yonggang

Publication type:

Article

A comparison of flow development in high density gas-solids circulating fluidized bed downer and riser reactors.

Published in:

AIChE Journal, 2015, v. 61, n. 4, p. 1172, doi. 10.1002/aic.14728

By:

Wang, Chengxiu;
Li, Chunyi;
Zhu, Jesse;
Barghi, Shahzad

Publication type:

Article

Formation of Hot Tear Under Controlled Solidification Conditions.

Published in:

Metallurgical & Materials Transactions. Part A, 2014, v. 45, n. 6, p. 2855, doi. 10.1007/s11661-014-2220-6

By:

Subroto, Tungky;
Miroux, Alexis;
Bouffier, Lionel;
Josserond, Charles;
Salvo, Luc;
Suéry, Michel;
Eskin, Dmitry;
Katgerman, Laurens

Publication type:

Article

Verification of the Simulated Residual Stress in the Cross Section of Gray Cast Iron Stress Lattice Shape Casting via Thermal Stress Analysis.

Published in:

Metallurgical & Materials Transactions. Part A, 2014, v. 45, n. 4, p. 2315, doi. 10.1007/s11661-013-2126-8

By:

Motoyama, Yuichi;
Inukai, Daiki;
Okane, Toshimitsu;
Yoshida, Makoto

Publication type:

Article

Relationship between Structure and Mechanical Properties of Melt Processable PTFE: Influence of Molecular Weight and Comonomer Content.

Published in:

Macromolecular Materials & Engineering, 2013, v. 298, n. 9, p. 954, doi. 10.1002/mame.201200172

By:

Frick, Achim;
Sich, Dorota;
Heinrich, Gert;
Stern, Claudia;
Gössi, Matthias;
Tervoort, Theo A.

Publication type:

Article

Predicting free edge delamination induced by thermal loading using finite fracture mechanics: Predicting free edge delamination: M. Burhan et al.

Published in:

International Journal of Fracture, 2025, v. 250, n. 1, p. 1, doi. 10.1007/s10704-024-00817-z

By:

Burhan, Mohammad;
Ullah, Zahur;
Kazancı, Zafer;
Catalanotti, Giuseppe

Publication type:

Article

Characterisation results for oxide ceramic functionally graded with cemented carbide sintered by PECS.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1365, doi. 10.1007/s00170-024-14229-9

By:

Bertolete, Marcelo;
Fraga, Luma Gançalves;
Uliana, Ailana Kröhling;
Martos, Luís Gustavo;
Bahiense, Daniela;
Bozzi, Antônio César;
Barbosa, Patrícia Alves;
Machado, Izabel Fernanda

Publication type:

Article

Laser powder bed fusion of NdFeB and influence of powder bed heating on density and magnetic properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 5017, doi. 10.1007/s00170-024-13605-9

By:

Genç, Kübra;
Toyting, Sirapob;
Galindo-Nava, Enrique;
Todd, Iain;
Mumtaz, Kamran

Publication type:

Article

Study on the vertical Bridgman method of melt‐grown CsPbBr<sub>3</sub> single crystals for nuclear radiation detection.

Published in:

Acta Crystallographica Section B: Structural Science, Crystal Engineering & Materials, 2024, v. 80, n. 2, p. 64, doi. 10.1107/S2052520624000398

By:

Zhang, Mingzhi;
Huang, Chentao;
Xia, Guotu;
Liu, Juan;
Tian, Fang;
Zou, Jijun;
Tang, Bin

Publication type:

Article

Research on the Thermal Conductivity and Microstructure of Calcium Lignosulfonate-Magnesium Oxide Solidified Loess.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 8, p. 4545, doi. 10.3390/app15084545

By:

Lu, Yuwen;
Zhang, Wuyu

Publication type:

Article

Cell/Module Integration Technology with Wire-Embedded EVA Sheet.

Published in:

Applied Sciences (2076-3417), 2021, v. 11, n. 9, p. 4170, doi. 10.3390/app11094170

By:

Park, Jeong Eun;
Choi, Won Seok;
Lim, Donggun;
Tina, Giuseppe Marco

Publication type:

Article

Vitrification and nanowarming enable long-term organ cryopreservation and life-sustaining kidney transplantation in a rat model.

Published in:

Nature Communications, 2023, v. 14, n. 1, p. 1, doi. 10.1038/s41467-023-38824-8

By:

Han, Zonghu;
Rao, Joseph Sushil;
Gangwar, Lakshya;
Namsrai, Bat-Erdene;
Pasek-Allen, Jacqueline L.;
Etheridge, Michael L.;
Wolf, Susan M.;
Pruett, Timothy L.;
Bischof, John C.;
Finger, Erik B.

Publication type:

Article