Works matching DE "THERMAL properties of alloys"
Results: 235
Thermal stability and mechanical properties of nanocrystalline Fe-Ni-Zr alloys prepared by mechanical alloying.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 24, p. 8402, doi. 10.1007/s10853-013-7652-7
- By:
- Publication type:
- Article
Density and thermal expansion of Cr-Fe, Fe-Ni, and Cr-Ni binary liquid alloys.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 14, p. 4934, doi. 10.1007/s10853-013-7274-0
- By:
- Publication type:
- Article
Adiabatic heating and the saturation of grain refinement during SPD of metals and alloys: experimental assessment and computer modeling.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 13, p. 4626, doi. 10.1007/s10853-013-7254-4
- By:
- Publication type:
- Article
Metallic glass formation in the binary Cu-Hf system.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 4, p. 1819, doi. 10.1007/s10853-012-6946-5
- By:
- Publication type:
- Article
Thermal stability up to 800 °C of a Ni-4 wt% Al nanocomposite.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 22, p. 7759, doi. 10.1007/s10853-012-6501-4
- By:
- Publication type:
- Article
The effect of alloying with hafnium on the thermal stability of chromium bronze after severe plastic deformation.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 22, p. 7764, doi. 10.1007/s10853-012-6525-9
- By:
- Publication type:
- Article
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 9, p. 4062, doi. 10.1007/s10853-012-6260-2
- By:
- Publication type:
- Article
An investigation on hot-cracking mechanism of Sr addition into Mg-6Al-0.5Mn alloy.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 4, p. 2000, doi. 10.1007/s10853-011-5997-3
- By:
- Publication type:
- Article
Prediction of hot deformation behavior of Al-5.9%Cu-0.5%Mg alloys with trace additions of Sn.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 2, p. 929, doi. 10.1007/s10853-011-5873-1
- By:
- Publication type:
- Article
Measurement of surface tension and specific heat of Ni-18.8 at.% Si alloy melt by containerless processing.
- Published in:
- Journal of Materials Science, 2011, v. 46, n. 19, p. 6243, doi. 10.1007/s10853-011-5557-x
- By:
- Publication type:
- Article
Formation of sphalerite and wurtzite ZnO in Pd-Zn alloy after internal oxidation at elevated temperatures.
- Published in:
- Journal of Materials Science, 2011, v. 46, n. 13, p. 4568, doi. 10.1007/s10853-011-5355-5
- By:
- Publication type:
- Article
Oxidation behavior and effect of oxidation on tensile properties of Ti60 alloy.
- Published in:
- Journal of Materials Science, 2011, v. 46, n. 5, p. 1351, doi. 10.1007/s10853-010-4926-1
- By:
- Publication type:
- Article
Wetting transition of grain boundaries in the Sn-rich part of the Sn-Bi phase diagram.
- Published in:
- Journal of Materials Science, 2011, v. 46, n. 5, p. 1557, doi. 10.1007/s10853-010-4961-y
- By:
- Publication type:
- Article
Formation of titanium nitride on γ-TiAl alloys by direct metal–gas reaction.
- Published in:
- Journal of Materials Science, 2006, v. 41, n. 14, p. 4654, doi. 10.1007/s10853-006-0030-y
- By:
- Publication type:
- Article
Characterization of the brazed joint interface between Al<sub>2</sub>O<sub>3</sub> and (Ag–Cu–Ti).
- Published in:
- Journal of Materials Science, 2004, v. 39, n. 16/17, p. 5587, doi. 10.1023/B:JMSC.0000039295.03229.25
- By:
- Publication type:
- Article
Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments Using Different Aluminium Fillers.
- Published in:
- GSTF Journal of Engineering Technology, 2013, v. 2, n. 2, p. 116, doi. 10.5176/2251-3701_2.2.81
- By:
- Publication type:
- Article
Investigation of the thermal electromotive force of steels and alloys of different structural grades in electron beam welding.
- Published in:
- Welding International, 2011, v. 25, n. 9, p. 703, doi. 10.1080/09507116.2011.566744
- By:
- Publication type:
- Article
Effect of ultrafine particles of activating fluxes on the laser welding process.
- Published in:
- Welding International, 2011, v. 25, n. 7, p. 545, doi. 10.1080/09507116.2011.566727
- By:
- Publication type:
- Article
Nickel and titanium-based high-temperature creep resistant alloy soldering.
- Published in:
- Welding International, 2011, v. 25, n. 1, p. 32, doi. 10.1080/09507111003655127
- By:
- Publication type:
- Article
Effects of Deformation on Microstructure of Cu-Zn-Ni Alloy.
- Published in:
- Gazi University Journal of Science, 2012, v. 25, n. 2, p. 337
- By:
- Publication type:
- Article
Surface Properties and Corrosion Behavior of Co–Cr Alloy Fabricated with Selective Laser Melting Technique.
- Published in:
- Cell Biochemistry & Biophysics, 2013, v. 67, n. 3, p. 983, doi. 10.1007/s12013-013-9593-9
- By:
- Publication type:
- Article
Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars.
- Published in:
- ACI Materials Journal, 2016, v. 113, n. 5, p. 579, doi. 10.14359/51688985
- By:
- Publication type:
- Article
Temperature, macrostructure and hardness in high strength low alloy steel welds.
- Published in:
- Science & Technology of Welding & Joining, 2003, v. 8, n. 5, p. 334, doi. 10.1179/136217103225005561
- By:
- Publication type:
- Article
The structure and thermal stability of mechanically alloyed Ni-Nb-Zr amorphous alloys.
- Published in:
- Journal of Materials Science, 2002, v. 37, n. 24, p. 5255, doi. 10.1023/A:1021008620711
- By:
- Publication type:
- Article
Processing of Fe-Al-C-Ce alloys through air induction melting with flux cover (AIMFC) and electroslag remelting (ESR).
- Published in:
- Journal of Materials Science, 2002, v. 37, n. 23, p. 5021, doi. 10.1023/A:1021035615317
- By:
- Publication type:
- Article
Martensitic transformation of an aged/thermal-cycled Ti<sub>30.5</sub>Ni<sub>49.5</sub>Zr<sub>10</sub>Hf<sub>10</sub> shape memory alloy.
- Published in:
- Journal of Materials Science, 2002, v. 37, n. 14, p. 2851, doi. 10.1023/A:1016082004360
- By:
- Publication type:
- Article
Dilatometric study of martensitic transformation in NiTiCu and NiTi shape memory alloys.
- Published in:
- Journal of Materials Science, 2001, v. 36, n. 24, p. 5823, doi. 10.1023/A:1012908222409
- By:
- Publication type:
- Article
The effect of Fe on the crystallization behavior of Al–Mm–Ni–Fe amorphous alloys.
- Published in:
- Journal of Materials Science, 2001, v. 36, n. 8, p. 2089, doi. 10.1023/A:1017567924939
- By:
- Publication type:
- Article
The sequence of precipitation in 339 aluminum castings.
- Published in:
- Journal of Materials Science, 2001, v. 36, n. 2, p. 461, doi. 10.1023/A:1004888831537
- By:
- Publication type:
- Article
The influence of low-melting-point alloy on the rheological properties of a polystyrene melt.
- Published in:
- Journal of Materials Science, 2000, v. 35, n. 18, p. 4573, doi. 10.1023/A:1004845426786
- By:
- Publication type:
- Article
Precipitation in 339 and 2124 aluminum: A caveat for calorimetry.
- Published in:
- Journal of Materials Science, 2000, v. 35, n. 15, p. 3871, doi. 10.1023/A:1004837615783
- By:
- Publication type:
- Article
Aging impact on mechanical properties and microstructure of Al-6063.
- Published in:
- Journal of Materials Science, 2000, v. 35, n. 10, p. 2529, doi. 10.1023/A:1004742407600
- By:
- Publication type:
- Article
Influence of Ti and Zr on the bond strength between carbon rod and Cu-Ti and/or Cu-Zr alloys.
- Published in:
- Journal of Materials Science, 2000, v. 35, n. 2, p. 503, doi. 10.1023/A:1004792022731
- By:
- Publication type:
- Article
Magnetic properties and thermomagnetic analysis of a Fe-20Mo-5Ni-0.075C alloy.
- Published in:
- Journal of Materials Science, 1999, v. 34, n. 18, p. 4545, doi. 10.1023/A:1004601725270
- By:
- Publication type:
- Article
Crystallization of (Fe, Co)78Si9B13 alloys: influence of relaxation processes.
- Published in:
- Journal of Materials Science, 1998, v. 33, n. 8, p. 2171, doi. 10.1023/A:1004335623078
- By:
- Publication type:
- Article
Thermophysical properties of substantially undercooled liquid Ti-Al-Nb ternary alloy measured by electromagnetic levitation.
- Published in:
- Philosophical Magazine Letters, 2013, v. 93, n. 3, p. 138, doi. 10.1080/09500839.2012.752882
- By:
- Publication type:
- Article
Doping Effects on the Thermoelectric Properties of AgSbTe<sub>2</sub>.
- Published in:
- Journal of Electronic Materials, 2009, v. 38, n. 7, p. 1504, doi. 10.1007/s11664-009-0669-7
- By:
- Publication type:
- Article
Thermoelectric Properties of Directionally Solidified Half-Heusler (M,M)NiSn (M<sup>a</sup>, M<sup>b</sup> = Hf, Zr, Ti) Alloys.
- Published in:
- Journal of Electronic Materials, 2009, v. 38, n. 7, p. 934, doi. 10.1007/s11664-009-0710-x
- By:
- Publication type:
- Article
Oxidation Behavior of Rare-Earth-Containing Pb-Free Solders.
- Published in:
- Journal of Electronic Materials, 2009, v. 38, n. 2, p. 210, doi. 10.1007/s11664-008-0544-y
- By:
- Publication type:
- Article
Division of character zones and elements distribution of Fe<sub>3</sub>Al/Cr–Ni alloy fusion bonded joint.
- Published in:
- Materials Science & Technology, 2007, v. 23, n. 7, p. 799, doi. 10.1179/174328407X176839
- By:
- Publication type:
- Article
Computational materials science: Substitution with vision.
- Published in:
- Nature, 2012, v. 491, n. 7426, p. 674, doi. 10.1038/nature11755
- By:
- Publication type:
- Article
EFFECTS OF CHEMICAL COMPOSITION ON MECHANICAL PROPERTIES OF Al-Mg-Si-Mn BASED ALLOYS.
- Published in:
- Materials Engineering / Materiálové Inžinierstvo, 2017, v. 24, n. 1, p. 11
- By:
- Publication type:
- Article
ELECTRONIC AND THERMOELECTRIC PROPERTIES OF PURE AND ALLOYS In<sub>2</sub>O<sub>3</sub> TRANSPARENT CONDUCTORS.
- Published in:
- Modern Physics Letters B, 2010, v. 24, n. 21, p. 2251, doi. 10.1142/S0217984910024584
- By:
- Publication type:
- Article
Fe-Ni Alloy Synthesis Based on Nitrates Thermal Decomposition Followed by H Reduction.
- Published in:
- Metallurgical & Materials Transactions. Part B, 2014, v. 45, n. 6, p. 2033, doi. 10.1007/s11663-014-0221-x
- By:
- Publication type:
- Article
Phase Transformations and Microstructural Development in the U-10 Wt Pct Mo Alloy with Varying Zr Contents After Heat Treatments Relevant to the Monolithic Fuel Plate Fabrication Process.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2019, v. 50, n. 1, p. 72, doi. 10.1007/s11661-018-4987-3
- By:
- Publication type:
- Article
Characterization of the Isothermal Precipitation Kinetics of an Al-Zn-Mg-Cu Alloy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 10, p. 5157, doi. 10.1007/s11661-018-4822-x
- By:
- Publication type:
- Article
Microstructure Evolution in Cu-Pd-Ag Alloy Wires During Heat Treatment.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 10, p. 4947, doi. 10.1007/s11661-018-4800-3
- By:
- Publication type:
- Article
Application of the Thermodynamic Extremal Principle to Massive Transformations in Fe-C Alloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 10, p. 4484, doi. 10.1007/s11661-018-4790-1
- By:
- Publication type:
- Article
Effects of Cu and Si Contents on the Fluidity, Hot Tearing, and Mechanical Properties of Al-Cu-Si Alloys.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 10, p. 5137, doi. 10.1007/s11661-018-4786-x
- By:
- Publication type:
- Article
Use of Hot Rolling for Generating Low Deviation Twins and a Disconnected Random Boundary Network in Inconel 600 Alloy.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 2, p. 628, doi. 10.1007/s11661-017-4431-0
- By:
- Publication type:
- Article