Works about SURFACE finishing

Results: 1813

New approach to minimise surface roughness in Polytetrafluoroethylene (PTFE) through robotic spindle speed control.

Published in:

ESTEEM, 2025, v. 21, p. 106, doi. 10.24191/esteem.v21iMarch.4359.g3122

By:

Ezwane Wan Jusoh, Wan Nor Shela;
Zakaria, Shukri;
Yahaya, Mohamad Irwan;
Mahamad Basri, Mahamad Hisyam;
Daud, Razak;
Ismail, Noor Iswadi

Publication type:

Article

Mass Finishing of Ti–6Al–4V Additively Manufactured by Laser Metal Deposition with Powder Process.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402882

By:

Ernould, Clément;
Jay, Martin;
Auger, Jean‐Marc;
Lesseur, Julien;
Tranchand, Benoît

Publication type:

Article

MXene layers by electrophoretic deposition: materials, applications and opportunities.

Published in:

2025

By:

Walsh, F. C.

Publication type:

Announcement

Формування мікропрофілю поверхонь виробу при магнітно-абразивному обробленні площин головками на базі високоенергетичних постійних магнітів.

Published in:

Mechanics & Advanced Technologies, 2025, v. 9, n. 1, p. 114, doi. 10.20535/2521-1943.2025.9.1(104).324280

By:

Майборода, В. С.;
Джулій, Д. Ю.;
Буріков, О. О.;
Бєляєв, O. O.

Publication type:

Article

Farklı Yüzey Bitirme Prosedürlerinin Basılabilir Seramik-Cam Polimer Reçinesinin Translusensine Etkisi: in vitro Çalışma.

Published in:

Turkiye Klinikleri Journal of Dental Sciences, 2025, v. 31, n. 2, p. 284, doi. 10.5336/dentalsci.2024-106737

By:

AYDIN, Nazlı;
SOYGUN, Koray

Publication type:

Article

TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing.

Published in:

International Journal of Vehicle Structures & Systems (IJVSS), 2025, v. 17, n. 1, p. 104, doi. 10.4273/ijvss.17.1.16

By:

Kalyanakumar, S.;
Natarajan, S.;
Prabhahar, M.;
Saravanakumar, M.;
Sudhakaran, P.;
Suresh, N.

Publication type:

Article

Precision surface topography prediction in ball-end milling: a CWER-based approach for enhanced accuracy and efficiency.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1621, doi. 10.1007/s00170-025-15579-8

By:

Maaloul, Makram;
Belguith, Rami;
Regaieg, Amine;
Sai, Lotfi;
Amrouche, Abdelwaheb

Publication type:

Article

Does Repolishing Affect the Gloss and Roughness of Lithium Disilicate and Monolithic Zirconia Ceramics?

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 9, p. 4622, doi. 10.3390/app15094622

By:

Cebi Tuysuz, Cigdem;
Demir, Necla;
Yuzbasioglu, Emir

Publication type:

Article

Analyzing the Potential of Laser Femtosecond Technology for the Mass Production of Cyclic Olefin Copolymer Microfluidic Devices for Biomedical Applications.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1289, doi. 10.3390/polym17091289

By:

Varela Leniz, Irene;
Bakouche, Taieb;
Astigarraga, Malen;
Husson, Florent;
Zaldua, Ane Miren;
Gemini, Laura;
Vilas-Vilela, José Luis;
Etxeberria, Leire

Publication type:

Article

Removing Alpha Case from Laser Powder Bed Fusion Components by Cavitation Abrasive Surface Finishing.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1977, doi. 10.3390/ma18091977

By:

Petram, Rohin;
Wisdom, Conall;
Montelione, Alex;
Nouwens, Cole;
Sanders, Dan;
Ramulu, Mamidala;
Arola, Dwayne

Publication type:

Article

Comparative Analysis of Surface Roughness and Tool Wear under Dry, MQL, and Cryogenic Machining Conditions in Invar 36 Turning Operations.

Published in:

Journal of Mines, Metals & Fuels, 2025, v. 73, n. 4, p. 1097, doi. 10.18311/jmmf/2025/47546

By:

Shetty, Sushmith M.;
Marakini, Vikas;
D'Mello, Grynal;
Pai, Srinivasa P.;
Ashray;
Dsouza, Elrick Winston;
Dsouza, Lloyd Alston;
Mendonca, Vivan

Publication type:

Article

Salicylic-acid-grafted chitin nanowhiskers as reinforcing fillers and fabric surface finishes with UV-protecting and deodorizing performances.

Published in:

Cellulose, 2025, v. 32, n. 6, p. 4057, doi. 10.1007/s10570-025-06504-z

By:

Araki, Jun;
Isogai, Yuika;
Iizuka, Akari;
Amemiya, Toshiko;
Hamada, Hitomi

Publication type:

Article

NUMERICAL SIMULATION OF MICROCELLULAR INJECTION MOLDING: A CASE STUDY.

Published in:

Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment & Technology, 2024, v. 35, p. 5, doi. 10.35219/awet.2024.01

By:

Chaabene, A.;
Khalifa, A. Ben;
Chatti, S.

Publication type:

Article

Experimental investigation of laser texturing on surface roughness and wettability of PAHT CF15 fabricated by fused deposition modeling.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6443, doi. 10.1002/pc.29370

By:

Prasad, Shivam;
Prakash, Shashi

Publication type:

Article

무전해 니켈-금 표면처리가 위상천이기의 전송손실에미치는 영향 분석.

Published in:

Journal of Korean Institute of Electromagnetic Engineering & Science / Han-Guk Jeonjapa Hakoe Nonmunji, 2025, v. 36, n. 3, p. 231, doi. 10.5515/KJKIEES.2025.36.3.231

By:

최 재 성;
정 재 영

Publication type:

Article

The Painted Wooden Tomb Effigies at Goudhurst to Sir Alexander Culpepper (d. 1541) and his Second Wife, Dame Constance Culpepper, and their Comparators.

Published in:

Journal of the British Archaeological Association, 2023, v. 176, n. 1, p. 296, doi. 10.1080/00681288.2023.2231227

By:

Badham, Sally

Publication type:

Article

Surface properties and biocompatibility studies on bone plate by magnetorheological finishing.

Published in:

Surface Engineering, 2022, v. 38, n. 7-9, p. 797, doi. 10.1080/02670844.2022.2154006

By:

Singh Rajput, Atul;
Das, Manas;
Kapil, Sajan

Publication type:

Article

Laser-assisted wire cladding using a retrofitted laser welding system.

Published in:

Surface Engineering, 2021, v. 37, n. 5, p. 634, doi. 10.1080/02670844.2020.1820266

By:

Khan, M. Shehryar;
Enrique, P.;
Song, G.;
Faria, M. I. S. T.;
Zhou, Y.

Publication type:

Article

Effects of the Surface Finish on Thin Specimens Made by Electron Beam Melting Technology.

Published in:

Macromolecular Symposia, 2021, v. 396, n. 1, p. 1, doi. 10.1002/masy.202000307

By:

De Luca, Alessandro;
Lamanna, Giuseppe;
Caputo, Francesco;
Borrelli, Rosario;
Franchitti, Stefania;
Pirozzi, Carmine;
Sepe, Raffale

Publication type:

Article

Detrimental angle range between c axis of Sn crystal and electron flow for the electromigration reliability of ball grid array devices.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 22, p. 17877, doi. 10.1007/s10854-022-08651-6

By:

Li, Xiao;
Gao, Li-Yin;
Tao, Jun-Lei;
Dai, Shu-Jun;
Liu, Zhi-Quan

Publication type:

Article

Effects of immersion silver (ImAg) and immersion tin (ImSn) surface finish on the microstructure and joint strength of Sn-3.0Ag-0.5Cu solder.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 17, p. 14249, doi. 10.1007/s10854-022-08353-z

By:

Amli, S. F. Muhd;
Salleh, M. A. A. Mohd;
Ramli, M. I. I.;
Aziz, M. S. Abdul;
Yasuda, H.;
Chaiprapa, J.;
Nogita, K.

Publication type:

Article

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 10, p. 8233, doi. 10.1007/s10854-022-07974-8

By:

Dele-Afolabi, T. T.;
Hanim, M. A. Azmah;
Vidyatharran, K.;
Matori, K. A.;
Azlina, O. Saliza;
Calin, R.

Publication type:

Article

Solid-state diffusion studies of lead-free solders on gold and in polymer films.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 10, p. 7679, doi. 10.1007/s10854-022-07917-3

By:

Gupte, Omkar;
Murtagian, Gregorio;
Kathaperumal, Mohanalingam;
Tummala, Rao;
Smet, Vanessa

Publication type:

Article

Shear performance of microscale ball grid array structure Sn–3.0Ag–0.5Cu solder joints with different surface finish combinations under electro-thermo-mechanical coupled loads.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 8, p. 4924, doi. 10.1007/s10854-021-07682-9

By:

Wang, Bo;
Li, Wangyun;
Pan, Kailin

Publication type:

Article

A review of interconnect materials used in emerging memory device packaging: first- and second-level interconnect materials.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 23, p. 27133, doi. 10.1007/s10854-021-07105-9

By:

Zou, Yong Sheng;
Gan, Chong Leong;
Chung, Min-Hua;
Takiar, Hem

Publication type:

Article

Comparative study of normal and thin Au/Pd/Ni(P) surface finishes with Sn–3.0Ag–0.5Cu solder joints under isothermal aging.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 20, p. 24790, doi. 10.1007/s10854-021-06936-w

By:

Back, Jong-Hoon;
Yoon, Jeong-Won

Publication type:

Article

Comparative study between the Sn–Ag–Cu/ENIG and Sn–Ag–Cu/ENEPIG solder joints under extreme temperature thermal shock.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 6, p. 6890, doi. 10.1007/s10854-021-05395-7

By:

Tian, Ruyu;
Tian, Yanhong;
Huang, Yilong;
Yang, Dongsheng;
Chen, Cheng;
Sun, Huhao

Publication type:

Article

Growth of intermetallic compounds and brittle fracture behavior of Sn-Ag-Cu/ENIG joint with columnar Ni-P layer.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 1, p. 1042, doi. 10.1007/s10854-020-04879-2

By:

Seo, Wonil;
Kim, Min-Su;
Ko, Yong-Ho;
Kim, Young-Ho;
Yoo, Sehoon

Publication type:

Article

Effects of Ni(P) layer thickness and Pd layer type in thin-Au/Pd/Ni(P) surface finishes on interfacial reactions and mechanical strength of Sn–58Bi solder joints during aging.

Published in:

Journal of Materials Science: Materials in Electronics, 2020, v. 31, n. 22, p. 19852, doi. 10.1007/s10854-020-04509-x

By:

Kim, Jungsoo;
Jung, Seung-Boo;
Yoon, Jeong-Won

Publication type:

Article

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish.

Published in:

Journal of Materials Science: Materials in Electronics, 2020, v. 31, n. 11, p. 8316, doi. 10.1007/s10854-020-03367-x

By:

Hanim, M. A. Azmah;
Kamil, N. Muhamad;
Wei, Chuan Khang;
Dele-Afolabi, T. T.;
Azlina, O. Saliza

Publication type:

Article

Improvement of high-temperature thermal aging reliability of Ag–Au joints by modifying Ni/Au surface finish.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 22, p. 20292, doi. 10.1007/s10854-019-02415-5

By:

Zhang, Zheng;
Chen, Chuantong;
Wu, Albert T.;
Suganuma, Katsuaki

Publication type:

Article

Effect of surface finishing on signal transmission loss of microstrip copper lines for high-speed PCB.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 17, p. 16226, doi. 10.1007/s10854-019-01991-w

By:

Chen, Yuanming;
Gao, Yali;
Jin, Xiaofeng;
Zhou, Xuan;
Wang, Shouxu;
He, Wei;
Hong, Yan;
Zhou, Guoyun;
Zhang, Weihua;
Sun, Rui;
Huang, Yunzhong;
Tang, Yao

Publication type:

Article

Effects of Ni layer thickness of thin-ENEPIG surface finishes on the interfacial reactions and shear strength of Sn-3.0Ag–0.5Cu solder joints during aging.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 14, p. 12911, doi. 10.1007/s10854-019-01653-x

By:

Kim, Jungsoo;
Back, Jong-Hoon;
Jung, Seung-Boo;
Yoon, Jeong-Won

Publication type:

Article

Comparative study of ENEPIG and thin ENEPIG as surface finishes for SAC305 solder joints.

Published in:

Journal of Materials Science: Materials in Electronics, 2018, v. 29, n. 6, p. 4724, doi. 10.1007/s10854-017-8426-9

By:

Yoon, Jeong-Won;
Back, Jong-Hoon;
Jung, Seung-Boo

Publication type:

Article

Interfacial reaction and mechanical properties between low melting temperature Sn-58Bi solder and various surface finishes during reflow reactions.

Published in:

Journal of Materials Science: Materials in Electronics, 2015, v. 26, n. 3, p. 1649, doi. 10.1007/s10854-014-2589-4

By:

Lee, Sang-Min;
Yoon, Jeong-Won;
Jung, Seung-Boo

Publication type:

Article

Influence of cerium oxide (CeO) nanoparticles on the microstructure and hardness of tin-silver-copper (Sn-Ag-Cu) solders on silver (Ag) surface-finished copper (Cu) substrates.

Published in:

Journal of Materials Science: Materials in Electronics, 2014, v. 25, n. 12, p. 5375, doi. 10.1007/s10854-014-2316-1

By:

Fouzder, Tama;
Chan, Y.;
Chan, Daniel

Publication type:

Article

Surface integrity evaluation of ground intercritical austempered ductile iron (IADI).

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 2, p. 401, doi. 10.1007/s00170-025-15548-1

By:

Furno, María Emilia;
Sosa, Amadeo Daniel

Publication type:

Article

Novel processing of micro-channels in micro-grinding with automated laser-assistance.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 1, p. 17, doi. 10.1007/s00170-024-14510-x

By:

Sahu, Ashish Kumar;
Iqbal, Faiz;
Jha, Sunil

Publication type:

Article

Impact of different annealing methods on MEX-printed polyetherketoneketone parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 5059, doi. 10.1007/s00170-025-15482-2

By:

Butt, Javaid;
Mohaghegh, Vahaj

Publication type:

Article

Optimization of abrasive water jet polishing parameters for internal channels in additively manufactured high-temperature alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 5267, doi. 10.1007/s00170-025-15466-2

By:

Liu, Jinjin;
Hou, Yanhao;
Wang, Zhanshuang;
Wu, Yizhou;
Wang, Yajun;
Liu, Weiwei

Publication type:

Article

Comparative optimization of wire-cut EDM parameter for enhancing surface finish and machining time on stainless steel: a machine learning, genetic algorithms, teaching–learning-based optimization, and multi-objective Jaya approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 5339, doi. 10.1007/s00170-025-15450-w

By:

Siyoum, Yitayal Belew;
Kindie, Fikir Gashaw;
Gebeyehu, Mebratu Assefa;
Chanie, Sewale Enyew;
Yeshiwas, Teshager Awoke;
Zelalem, Yilkal Azene

Publication type:

Article

Feasibility of cost-effective ultra-precision diamond turning using ceramic bearing spindle.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 1, p. 777, doi. 10.1007/s00170-025-15239-x

By:

Das, Arnab;
Singh, Chitransh;
Bajpai, Vivek;
Chandravanshi, Madan Lal

Publication type:

Article

High-quality smooth finishing of blade-like geometries via G1 multi-pass 5-axis flank CNC machining using conical cutting tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 10, p. 4383, doi. 10.1007/s00170-024-14898-6

By:

Rajain, Kanika;
Gómez Escudero, Gaizka;
Bizzarri, Michal;
González Barrio, Haizea;
Calleja Ochoa, Amaia;
López de Lacalle, Luis Norberto;
Bartoň, Michael

Publication type:

Article

Quality enhancement of micro-milled channels with automated laser assistance.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 9, p. 4007, doi. 10.1007/s00170-024-13182-x

By:

Sahu, Ashish Kumar;
Iqbal, Faiz;
Jha, Sunil

Publication type:

Article

Dynamic and dimensional evaluation of robot applications in the drilling process in Al–Mg-Si 6351 T6 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3709, doi. 10.1007/s00170-025-15054-4

By:

Santos, Diego Barbosa Pratis;
Maia, Luís Henrique Andrade;
Martins, Paulo Sérgio;
Ba, Elhadji Cheikh Talibouya;
Vieira, Vitor Ferreira;
Shigaki, Yukio;
Fernandes, Gustavo Henrique Nazareno;
Santos, Sandro Cardoso

Publication type:

Article

Intelligent vacuum bagging leakage location prediction.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 5, p. 2877, doi. 10.1007/s00170-024-14987-6

By:

Esmaeili, Yussuf Reza;
Cosco, Brett;
Pan, Yifan;
Najjaran, Homayoun

Publication type:

Article

A review of the influence of sand properties on parts manufactured by rapid sand casting through additive manufacturing.

Published in:

2025

By:

Oguntuyi, Samson Dare;
Nyembwe, Kasongo;
Shongwe, Mxolisi Brendon;
Kabasele, Jonathan;
Mojisola, Tajudeen

Publication type:

Literature Review

Research on the prediction model of material removal rate in the magnetic abrasive finishing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 5, p. 2181, doi. 10.1007/s00170-024-14972-z

By:

Liu, Bingyang;
Ding, Yunlong;
Yan, Yuhang;
Han, Bing;
Chen, Yan

Publication type:

Article

Performance evaluation of CrAlNAg-coated inserts with varying Ag content during roughing and finishing operations in face milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 1, p. 413, doi. 10.1007/s00170-024-14790-3

By:

Rajput, Sumit Singh;
Upadhyay, Chandramani;
Gangopadhyay, Soumya;
Fernandes, Filipe

Publication type:

Article

Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 1, p. 383, doi. 10.1007/s00170-024-14523-6

By:

Villarrazo, Nagore;
Sáinz de la Maza, Álvaro;
Caneda, Soraya;
Bai, Lele;
Pereira, Octavio;
López de Lacalle, Luis Norberto

Publication type:

Article