Works about STIFFNESS (Mechanics)

Results: 3631

Wpływ udziału lepiszczy modyfikowanych elastomerem SBS na mrozoodporność starzonych mieszanek mineralno-asfaltowych.

Published in:

Polimery, 2008, v. 53, n. 10, p. 749, doi. 10.14314/polimery.2008.749

By:

RADZISZEWSKI, PIOTR

Publication type:

Article

Wytwarzanie i właściwości elementów hybrydowych typu metal-tworzywo polimerowe.

Published in:

Polimery, 2008, v. 53, n. 7/8, p. 519, doi. 10.14314/polimery.2008.519

By:

KACZMAR, JACEK W.;
WRÓBLEWSKI, ROMAN;
NAKONIECZNY, LESZEK;
IWKO, JACEK

Publication type:

Article

Experimental Study of Ultra-High-Strength Concrete under Triaxial Compression.

Published in:

ACI Materials Journal, 2016, v. 113, n. 1, p. 105, doi. 10.14359/51688071

By:

Yan-Bo Wang;
Liew, J. Y. Richard;
Siew Chin Lee;
Xiong, D. X.

Publication type:

Article

Durability of Very-High-Strength Concrete with Supplementary Cementitious Materials for Marine Environments.

Published in:

ACI Materials Journal, 2016, v. 113, n. 1, p. 95, doi. 10.14359/51687981

By:

Tze Yang Darren Lim;
Susanto Teng;
Bahador, Sabet Divsholi;
Gjørv, Odd E.

Publication type:

Article

Early-Age Stiffening of Paste, Mortar, and Concrete in Lab and Field.

Published in:

ACI Materials Journal, 2016, v. 113, n. 1, p. 83, doi. 10.14359/51687917

By:

Chang Hoon Lee;
Hover, Kenneth C.

Publication type:

Article

Stresses Due to Restrained Shrinkage in Concrete Deck Overlays.

Published in:

ACI Materials Journal, 2014, v. 111, n. 6, p. 701, doi. 10.14359/51687183

By:

Orta, Luis;
Bartlett, F. Michael

Publication type:

Article

Subjective Evaluation of Cotton Fabric Stiffened with Mango Kernel Starch.

Published in:

Man-Made Textiles in India, 2014, v. 42, n. 5, p. 167

By:

Kale, S.

Publication type:

Article

Carbon Reinforced Composites.

Published in:

Man-Made Textiles in India, 2013, v. 41, n. 11, p. 379

By:

Mathur, Manisha

Publication type:

Article

Non-invasive ménage à trois for the prediction of high-risk varices: stepwise algorithm using lok score, liver and spleen stiffness.

Published in:

Liver International, 2015, v. 35, n. 2, p. 317, doi. 10.1111/liv.12687

By:

Stefanescu, Horia;
Radu, Corina;
Procopet, Bogdan;
Lupsor ‐ Platon, Monica;
Habic, Alina;
Tantau, Marcel;
Grigorescu, Mircea

Publication type:

Article

SYNTHESIS OF PAN/CLAY NANOCOMPOSITES:: STUDY OF GAS PERMEATION PROPERTIES.

Published in:

International Journal of Nanoscience, 2011, v. 10, n. 4/5, p. 1101, doi. 10.1142/S0219581X11009210

By:

PATRA, SUBRATA K.;
PRUSTY, GYANARANJAN;
SWAIN, SARAT K.

Publication type:

Article

Prediction of dry veneer stiffness using near infrared spectra from transverse section of green log.

Published in:

Journal of Wood Science, 2013, v. 59, n. 5, p. 383, doi. 10.1007/s10086-013-1352-4

By:

Fujimoto, Takaaki;
Kawakami, Keisuke;
Aimi, Haruhisa;
Shimizu, Jun-ichi;
Hasegawa, Koichi;
Kobori, Hikaru;
Tsuchikawa, Satoru

Publication type:

Article

Shear resistance and failure modes of nailed joints loaded perpendicular to the grain.

Published in:

Journal of Wood Science, 2013, v. 59, n. 3, p. 255, doi. 10.1007/s10086-012-1317-z

By:

Sawata, Kei;
Shigemoto, Yosuke;
Hirai, Takuro;
Koizumi, Akio;
Sasaki, Yoshihisa

Publication type:

Article

Pseudodynamic tests and earthquake response analysis of timber structures III: three-dimensional conventional wooden structures with plywood-sheathed shear walls.

Published in:

Journal of Wood Science, 2011, v. 57, n. 6, p. 484, doi. 10.1007/s10086-011-1198-6

By:

Kamada, Takahisa;
Yasumura, Motoi;
Yasui, Shimpei;
Davenne, Luc;
Uesugi, Motoi

Publication type:

Article

Experimental Investigation of Stiffness Characteristics and Damping Properties of a Metallic Rubber Material.

Published in:

Mechanics of Composite Materials, 2017, v. 53, n. 4, p. 541, doi. 10.1007/s11029-017-9684-6

By:

Lu, Ch.;
Li, Jingyuan;
Zhou, Bangyang;
Li, Shuang

Publication type:

Article

A Refined Strut Model for Describing the Elastic Properties of Highly Porous Cellular Polymers Reinforced with Short Fibers.

Published in:

Mechanics of Composite Materials, 2017, v. 53, n. 3, p. 321, doi. 10.1007/s11029-017-9664-x

By:

Lagzdins, A.;
Zilaucs, A.;
Beverte, I.;
Andersons, J.;
Cabulis, U.

Publication type:

Article

Comparison of the Thermoelastic Properties of a Randomly Reinforced Composite Computed by the Classical Lamination Theory and by the Monte Carlo Simulation.

Published in:

Mechanics of Composite Materials, 2017, v. 53, n. 2, p. 149, doi. 10.1007/s11029-017-9649-9

By:

Padovec, Z.;
Růžička, M.;
Sedláček, R.;
Král, M.;
Růžička, P.

Publication type:

Article

Computer Modeling of the Dynamic Strength of Metal-Plastic Cylindrical Shells Under Explosive Loading.

Published in:

Mechanics of Composite Materials, 2017, v. 53, n. 2, p. 139, doi. 10.1007/s11029-017-9648-x

By:

Abrosimov, N.;
Novosel'tseva, N.

Publication type:

Article

Characterizing Large Strain Elasticity of Brittle Elastomeric Networks by Embedding Them in a Soft Extensible Matrix.

Published in:

Advanced Functional Materials, 2016, v. 26, n. 15, p. 2482, doi. 10.1002/adfm.201504536

By:

Ducrot, Etienne;
Creton, Costantino

Publication type:

Article

Biomimetic Carbon Nanotube Films with Gradient Structure and Locally Tunable Mechanical Property.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 46, p. 7173, doi. 10.1002/adfm.201503341

By:

Lin, Zhiqiang;
Gui, Xuchun;
Zeng, Zhiping;
Liang, Binghao;
Chen, Wenjun;
Liu, Ming;
Zhu, Yuan;
Cao, Anyuan;
Tang, Zikang

Publication type:

Article

The Mantis Shrimp Saddle: A Biological Spring Combining Stiffness and Flexibility.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 41, p. 6437, doi. 10.1002/adfm.201502987

By:

Tadayon, Maryam;
Amini, Shahrouz;
Masic, Admir;
Miserez, Ali

Publication type:

Article

Tuning Hydrogel Mechanics Using the Hofmeister Effect.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 41, p. 6503, doi. 10.1002/adfm.201502241

By:

Jaspers, Maarten;
Rowan, Alan E.;
Kouwer, Paul H. J.

Publication type:

Article

Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness.

Published in:

Advanced Functional Materials, 2014, v. 24, n. 31, p. 4905, doi. 10.1002/adfm.201400451

By:

Duoss, Eric B.;
Weisgraber, Todd H.;
Hearon, Keith;
Zhu, Cheng;
Small, Ward;
Metz, Thomas R.;
Vericella, John J.;
Barth, Holly D.;
Kuntz, Joshua D.;
Maxwell, Robert S.;
Spadaccini, Christopher M.;
Wilson, Thomas S.

Publication type:

Article

Defect-Tolerant Nanocomposites through Bio-Inspired Stiffness Modulation.

Published in:

Advanced Functional Materials, 2014, v. 24, n. 19, p. 2883, doi. 10.1002/adfm.201303503

By:

Beese, Allison M.;
An, Zhi;
Sarkar, Sourangsu;
Nathamgari, S. Shiva P.;
Espinosa, Horacio D.;
Nguyen, SonBinh T.

Publication type:

Article

Greatly Enhanced Thermal Contraction at Room Temperature by Carbon Nanotubes.

Published in:

Advanced Functional Materials, 2014, v. 24, n. 1, p. 77, doi. 10.1002/adfm.201301377

By:

Shen, Xingyuan;
Viney, Christopher;
Wang, Changchun;
Lu, Jennifer Q.

Publication type:

Article

An engineering approach for the estimation of slewing bearing stiffness in wind turbine generators.

Published in:

Wind Energy, 2019, v. 22, n. 3, p. 376, doi. 10.1002/we.2292

By:

Heras, Iker;
Aguirrebeitia, Josu;
Abasolo, Mikel;
Coria, Ibai

Publication type:

Article

Scour influence on the fatigue life of operational monopile‐supported offshore wind turbines.

Published in:

Wind Energy, 2018, v. 21, n. 9, p. 683, doi. 10.1002/we.2187

By:

Rezaei, Ramtin;
Duffour, Philippe;
Fromme, Paul

Publication type:

Article

Effects of composite fiber orientation on wind turbine blade buckling resistance.

Published in:

Wind Energy, 2014, v. 17, n. 12, p. 1925, doi. 10.1002/we.1681

By:

Cox, Kevin;
Echtermeyer, Andreas

Publication type:

Article

ACL graft compression: a method to allow reduced tunnel sizes in ACL reconstruction.

Published in:

2018

By:

Lord, Breck R.;
Colaco, Henry B.;
Gupte, Chinmay M.;
Wilson, Adrian J.;
Amis, Andrew A.

Publication type:

journal article

Sonoelastography shows that Achilles tendons with insertional tendinopathy are harder than asymptomatic tendons.

Published in:

2017

By:

Zhang, Qi;
Cai, Yehua;
Hua, Yinghui;
Shi, Jun;
Wang, Yuanyuan;
Wang, Yi

Publication type:

journal article

Biomechanical comparison of three methods for distal Achilles tendon reconstruction.

Published in:

2015

By:

Wu, Ziying;
Hua, Yinghui;
Li, Hongyun;
Chen, Shiyi;
Li, Yunxia

Publication type:

journal article

Varization open-wedge osteotomy of the distal femur: comparison between locking plate and angle blade plate constructs.

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2015, v. 23, n. 8, p. 2202, doi. 10.1007/s00167-014-2998-1

By:

Batista, Bruno;
Volpon, Jose;
Shimano, Antonio;
Kfuri, Mauricio

Publication type:

Article

In vitro comparison between cortical and cortico-cancellous femoral suspension devices for anterior cruciate ligament reconstruction: implications for mobilization.

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2015, v. 23, n. 8, p. 2324, doi. 10.1007/s00167-014-3055-9

By:

Rodríguez, Cristina;
García, Tomás;
Montes, Susana;
Rodríguez, Luis;
Maestro, Antonio

Publication type:

Article

A cruciate suture technique for rotator cuff repair.

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2015, v. 23, n. 2, p. 619, doi. 10.1007/s00167-014-3474-7

By:

Caldow, Jonathon;
Richardson, Martin;
Balakrishnan, Subash;
Sobol, Tony;
Lee, Peter;
Ackland, David

Publication type:

Article

The effect of inclination angle on the strength of vertical mattress configuration for meniscus repair.

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2015, v. 23, n. 1, p. 41, doi. 10.1007/s00167-013-2496-x

By:

Erduran, Mehmet;
Hapa, Onur;
Şen, Baran;
Kocabey, Yavuz;
Erdemli, Diler;
Aksel, Mehran;
Havitçioğlu, Hasan

Publication type:

Article

Meta-analysis on biomechanical properties of meniscus repairs: are devices better than sutures?

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2015, v. 23, n. 1, p. 83, doi. 10.1007/s00167-014-2966-9

By:

Buckland, Daniel;
Sadoghi, Patrick;
Wimmer, Matthias;
Vavken, Patrick;
Pagenstert, Geert;
Valderrabano, Victor;
Rosso, Claudio

Publication type:

Article

Clamp fixation to prevent unfolding of a suture knot decreases tensile strength of polypropylene sutures.

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2012, v. 20, n. 12, p. 2602, doi. 10.1007/s00167-012-1882-0

By:

Türker, Mehmet;
Yalçinozan, Mehmet;
Çirpar, Meriç;
Çetik, Özgür;
Kalaycioğlu, Barış

Publication type:

Article

Liver and spleen stiffness and their ratio assessed by real-time two dimensional-shear wave elastography in patients with liver fibrosis and cirrhosis due to chronic viral hepatitis.

Published in:

2015

By:

Grgurevic, Ivica;
Puljiz, Zeljko;
Brnic, Darko;
Bokun, Tomislav;
Heinzl, Renata;
Lukic, Anita;
Luksic, Boris;
Kujundzic, Milan;
Brkljacic, Boris

Publication type:

journal article

Stiffness of tumours measured by shear-wave elastography correlated with subtypes of breast cancer.

Published in:

European Radiology, 2013, v. 23, n. 9, p. 2450, doi. 10.1007/s00330-013-2866-2

By:

Chang, Jung;
Park, In;
Lee, Su;
Kim, Won;
Bae, Min;
Koo, Hye;
Yi, Ann;
Kim, Seung;
Cho, Nariya;
Moon, Woo

Publication type:

Article

Left atrial mechanics and aortic stiffness following high intensity interval training: a randomised controlled study.

Published in:

2020

By:

Jalaludeen, Navazh;
Bull, Samuel J.;
Taylor, Katrina A.;
Wiles, Jonathan D.;
Coleman, Damian A.;
Howland, Lucinda;
Mukhtar, Omar;
Cheriyan, Joseph;
Wilkinson, Ian B.;
Sharma, Rajan;
O'Driscoll, Jamie M.

Publication type:

journal article

A Dynamic Method of Nanoindentation.

Published in:

Measurement Techniques, 2017, v. 60, n. 8, p. 771, doi. 10.1007/s11018-017-1269-1

By:

Meshcheryakov, V.;
Maslennikov, V.;
Melekesov, E.

Publication type:

Article

Cylindrical Shell of Finite Length with Low Shear Stiffness Under the Action of Local Heat Sources.

Published in:

Journal of Mathematical Sciences, 2019, v. 238, n. 2, p. 97, doi. 10.1007/s10958-019-04220-1

By:

Hanulich, N. V.

Publication type:

Article

Thermoelasticity of a Cylindrical Shell with Low Shear Stiffness in a Local Temperature Field.

Published in:

Journal of Mathematical Sciences, 2017, v. 226, n. 1, p. 28, doi. 10.1007/s10958-017-3516-z

By:

Maksymuk, A.;
Hanulich, N.

Publication type:

Article

Dynamic Analysis of Composite Rods Under Thermal and Force Loads.

Published in:

Journal of Mathematical Sciences, 2017, v. 223, n. 1, p. 87, doi. 10.1007/s10958-017-3340-5

By:

Nemirovskii, Yu.;
Mishchenko, A.;
Terletskii, R.

Publication type:

Article

Sensitivity analysis of three-wheel vehicle’s suspension parameters influencing ride behavior.

Published in:

Noise & Vibration Worldwide, 2018, v. 49, n. 7/8, p. 272, doi. 10.1177/0957456518796846

By:

Sharma, Rakesh Chandmal;
Sharma, Sunil Kumar

Publication type:

Article

Influence of parameters of PM controller on vibration performance of liquid hydrostatic guide-way system.

Published in:

Noise & Vibration Worldwide, 2018, v. 49, n. 4, p. 140, doi. 10.1177/0957456518781856

By:

Chen, Liwen;
Cui, Bingyan;
Zhao, Jianhua;
Gao, Dianrong

Publication type:

Article

Supramolecular-Covalent Peptides Self-Assembly: From Design to Regenerative Medicine and Beyond.

Published in:

Biophysica, 2022, v. 2, n. 4, p. 324, doi. 10.3390/biophysica2040030

By:

Pugliese, Raffaele

Publication type:

Article

The increased matrix stiffness caused by LOXL2 activates Piezo1 channels to promote the migration and invasion of cervical cancer cells.

Published in:

Discover Oncology, 2025, v. 16, n. 1, p. 1, doi. 10.1007/s12672-025-02456-9

By:

Liu, Tingting;
Liang, Hua;
Li, Yang;
Liao, Wenxin;
Deng, Juexiao;
Zhang, Lanyue;
Shen, Fujin

Publication type:

Article

A general contact stiffness model for elastic bodies and its application in time-varying mesh stiffness of gear drive.

Published in:

Mathematics & Mechanics of Solids, 2023, v. 28, n. 2, p. 573, doi. 10.1177/10812865221092106

By:

Wang, Hongbing;
Zhou, Changjiang;
Lv, Yunyan;
Hu, Bo

Publication type:

Article

Stiffness optimization in nonlinear pantographic structures.

Published in:

Mathematics & Mechanics of Solids, 2020, v. 25, n. 12, p. 2252, doi. 10.1177/1081286520935503

By:

Desmorat, Boris;
Spagnuolo, Mario;
Turco, Emilio

Publication type:

Article

Stability of anisotropic, naturally straight, helical elastic thin rods.

Published in:

Mathematics & Mechanics of Solids, 2017, v. 22, n. 11, p. 2108, doi. 10.1177/1081286516657856

By:

Cheng, Yi-Chien;
Feng, Shih-Tsai;
Hu, Kai

Publication type:

Article