Works matching DE "SPOT welding"

Results: 1028

Hydrogen-Induced Failure Mechanisms in 304L Stainless Steel Filters: A Detailed Analysis.

Published in:

Journal of Failure Analysis & Prevention, 2025, v. 25, n. 3, p. 1096, doi. 10.1007/s11668-025-02165-z

By:

Saeidi, Navid;
Ashrafizadeh, Fakhreddin;
Karimpour, Masoud;
Soleimani, Iman

Publication type:

Article

Ultrasonic Inspection Technique for Welded Joints Obtained by Spot Friction Stir Welding.

Published in:

Russian Journal of Nondestructive Testing, 2023, v. 59, n. 12, p. 149, doi. 10.1134/S1061830923700262

By:

Borovkov, A. I.;
Prokhorovich, V. E.;
Bychenok, V. A.;
Berkutov, I. V.;
Alifanova, I. E.

Publication type:

Article

Ultrasonic Inspection Technique for Welded Joints Obtained by Spot Friction Stir Welding.

Published in:

Russian Journal of Nondestructive Testing, 2023, v. 59, n. 2, p. 149, doi. 10.1134/S1061830923700262

By:

Borovkov, A. I.;
Prokhorovich, V. E.;
Bychenok, V. A.;
Berkutov, I. V.;
Alifanova, I. E.

Publication type:

Article

Ultrasonic Measurement Optimization of Spot Welding Diameter of Thin Plate Based on Gain Compensation Algorithm.

Published in:

Russian Journal of Nondestructive Testing, 2021, v. 57, n. 7, p. 541, doi. 10.1134/S1061830921070135

By:

Wu, Gang;
Zhang, Dongdong;
Guan, Shanyue

Publication type:

Article

Analysis and Examination of Aluminum Sheets Suitable for Automotion Body: Ultrasonic Testing, Signal Processing, Simulation.

Published in:

Russian Journal of Nondestructive Testing, 2021, v. 57, n. 2, p. 135, doi. 10.1134/S1061830921020108

By:

Esmaeil Mirmahdi

Publication type:

Article

Numerical and Experimental Modeling of Spot Welding Defects by Ultrasonic Testing on Similar Sheets and Dissimilar Sheets.

Published in:

Russian Journal of Nondestructive Testing, 2020, v. 56, n. 8, p. 620, doi. 10.1134/S1061830920080069

By:

Esmaeil Mirmahdi

Publication type:

Article

An algorithm for the estimation of the quality of the spot welds.

Published in:

Russian Journal of Nondestructive Testing, 2014, v. 50, n. 6, p. 335, doi. 10.1134/S1061830914060047

By:

Genutis, Gediminas;
Jasiūnienė, Elena;
Sanderson, Ruth

Publication type:

Article

Comparison between traditional and alternative biocompatible welding techniques used in orthodontic devices.

Published in:

Journal of Orthodontics, 2021, v. 48, n. 2, p. 127, doi. 10.1177/1465312520972403

By:

de Souza Henkin, Fernanda;
de Menezes, Luciane Macedo;
Dedavid, Berenice Anina;
Quintão, Cátia Abdo

Publication type:

Article

Status and noise reduction analysis of robotics lab in an academic institute by using acoustic materials.

Published in:

Noise & Vibration Worldwide, 2023, v. 54, n. 9, p. 469, doi. 10.1177/09574565231193052

By:

Singh, Charanjeet;
Deswal, Surinder

Publication type:

Article

Comparative Numerical Analysis of Keyhole Shape and Penetration Depth in Laser Spot Welding of Aluminum with Power Wave Modulation.

Published in:

Thermo, 2024, v. 4, n. 2, p. 222, doi. 10.3390/thermo4020013

By:

SaediArdahaei, Saeid;
Pham, Xuan-Tan

Publication type:

Article

Joining 1.1‐ and 2.1‐mm Al Sheets by Friction Stir Spot Welding.

Published in:

Material Design & Processing Communications, 2025, v. 2025, p. 1, doi. 10.1155/mdp2/3110429

By:

Abdullah, Isam Tareq;
Mejbel, Mohanad Kadhim;
Al-Filfily, Ammar A. H.;
Tridello, Andrea

Publication type:

Article

Long-Term Outcome of Metal-on-Metal Total Hip Arthroplasty with Modular Neck Stem.

Published in:

Journal of Clinical Medicine, 2024, v. 13, n. 6, p. 1525, doi. 10.3390/jcm13061525

By:

Wakabayashi, Hiroki;
Hasegawa, Masahiro;
Naito, Yohei;
Tone, Shine;
Sudo, Akihiro

Publication type:

Article

Relationship between Stress Shielding and Optimal Femoral Canal Contact Regions for Short, Tapered-Wedge Stem Analyzed by 2D and 3D Systems in Total Hip Arthroplasty.

Published in:

Journal of Clinical Medicine, 2023, v. 12, n. 9, p. 3138, doi. 10.3390/jcm12093138

By:

Maeda, Takashi;
Nakano, Masaki;
Nakamura, Yukio;
Momose, Takashige;
Sobajima, Atsushi;
Takahashi, Jun;
Nakata, Katsuya;
Nawata, Masashi

Publication type:

Article

Optimization of the Process Parameters of Resistance Spot Welding of AISI 316l Sheets Using Taguchi Method.

Published in:

Mechanics & Mechanical Engineering, 2019, v. 23, n. 1, p. 64, doi. 10.2478/mme-2019-0009

By:

Muthu, P.

Publication type:

Article

Experimental Study of Spot Weld Parameters in Resistance Spot Welding Process.

Published in:

Mechanics & Mechanical Engineering, 2018, v. 22, n. 1, p. 179

By:

HABIB, Lebbal;
AHMED, Reffas S.;
HABIB, Berrekia;
GUAGLIANO, Mario

Publication type:

Article

Specifics of Creating Joints from Modern Boron-Microalloyed High-Strength Steels Utilizing Laser, Contact Spot, as Well as Argon-Arc Spot Welding Technologies.

Published in:

Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2024, v. 46, n. 9, p. 893, doi. 10.15407/mfint.46.09.0893

By:

Polishko, H.;
Kostetskyi, Yu.;
Kostin, V.;
Pedchenko, Ye.;
Bernatskyi, A.;
Sokolovskyi, M.;
Honcharov, P.;
Zaitsev, V.

Publication type:

Article

Parameters influence on mechanical properties of resistance spot welding: AISI304L/AISI1005.

Published in:

Pollack Periodica, 2025, v. 20, n. 1, p. 102, doi. 10.1556/606.2024.01142

By:

Barrak, Osamah Sabah;
Ben-Elechi, Slim;
Chatti, Sami

Publication type:

Article

Wear Performance of Cu–Cd, Cu–Be and Cu–Cr–Zr Spot Welding Electrode Materials.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 7, p. 291, doi. 10.3390/lubricants11070291

By:

Bachchhav, Bhanudas D.;
Chaitanya, Shrikant V.;
Salunkhe, Sachin;
Chandrakumar, Palanisamy;
Pagáč, Marek;
Nasr, Emad Abouel

Publication type:

Article

Effects of Tool Plunging Path on the Welded Joint Properties of Pinless Friction Stir Spot Welding.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 3, p. 150, doi. 10.3390/lubricants11030150

By:

Ge, Xiaole;
Jiang, Di;
Song, Weiwei;
Wang, Hongfeng

Publication type:

Article

An Active Power Filter with Energy Storage and Double DC Conversion for Power Surge Compensation.

Published in:

Electronics (2079-9292), 2020, v. 9, n. 9, p. 1489, doi. 10.3390/electronics9091489

By:

Baszynski, Marcin;
Sowa, Kacper;
Pirog, Stanislaw

Publication type:

Article

Robot Nokta Kaynaklarında Smartblock ile Elektrot Bileme Sıklığı, Kaynak Akımı ve Süresinin Taguchi Metodolojisi Kullanılarak Araştırılması.

Published in:

Afyon Kocatepe University Journal of Science & Engineering / Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 2024, v. 24, n. 1, p. 207, doi. 10.35414/akufemubid.1337900

By:

KIR, Hilal;
KARABULUT, Şükrü;
YAZAR, Mustafa;
TALAŞ, Şükrü

Publication type:

Article

Joints Parameters Identification in Numerical Modeling of Structural Dynamics.

Published in:

Shock & Vibration, 2018, p. 1, doi. 10.1155/2018/2365759

By:

Yang, Yuedong;
Chen, Jiqing;
Lan, Fengchong;
Xiong, Fei;
Zeng, Zicong

Publication type:

Article

Analyzing the Force and Current Profiles using Pneumatic and Servo Based Electrode Actuation System for Resistance Spot Welding.

Published in:

Caspian Journal of Applied Sciences Research, 2013, v. 2, n. 8, p. 38

By:

Charde, Nachimani

Publication type:

Article

Effect of Heat Sink on Mechanical, Metallurgical and Microstructural Characteristics of Friction Stir Spot Welded Dissimilar Al6061 and Al5052 Joints.

Published in:

Journal of Nano- & Electronic Physics, 2022, v. 14, n. 6, p. 1, doi. 10.21272/jnep.14(6).06008

By:

Siddharth, S.;
Pradeep, A.;
Hemanthkumar, V.;
Rajaparthiban, J.

Publication type:

Article

An investigation on friction spot welding of AA2198-T8 thin sheets.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2017, v. 40, n. 4, p. 535, doi. 10.1111/ffe.12512

By:

Barros, P. A. F.;
Campanelli, L. C.;
Alcântara, N. G.;
Dos Santos, J. F.

Publication type:

Article

Mechanical performance of AA6181 refill friction spot welds under Lap shear tensile loading.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2015, v. 38, n. 12, p. 1443, doi. 10.1111/ffe.12312

By:

Rosendo, T.;
Tier, M.;
Mazzaferro, J.;
Mazzaferro, C.;
Strohaecker, T. R.;
Dos Santos, J. F.

Publication type:

Article

Fatigue fracture behaviour of spot welded B1500HS steel under tensile-shear load.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2015, v. 38, n. 8, p. 914, doi. 10.1111/ffe.12289

By:

Wang, B.;
Duan, Q. Q.;
Yao, G.;
Pang, J. C.;
Zhang, Z. F.;
Wang, L.;
Li, X. W.

Publication type:

Article

Simultaneous topology and fastener layout optimization of assemblies considering joint failure.

Published in:

International Journal for Numerical Methods in Engineering, 2021, v. 122, n. 1, p. 294, doi. 10.1002/nme.6538

By:

Ambrozkiewicz, Olaf;
Kriegesmann, Benedikt

Publication type:

Article

Comparison of Femoral Bone Mineral Density Changes around 3 Common Designs of Cementless Stems after Total Hip Arthroplasty—A Retrospective Cohort Study.

Published in:

Orthopaedic Surgery, 2022, v. 14, n. 6, p. 1059, doi. 10.1111/os.13265

By:

Liu, Yuan;
Wei, Wen‐Xing;
Zeng, Yi;
Ma, Jun;
Yang, Jing;
Shen, Bin

Publication type:

Article

Experimental and numerical analysis of shunting effect in resistance spot welding of Al2219 sheets.

Published in:

Bulletin of the Polish Academy of Sciences: Technical Sciences, 2016, v. 64, n. 2, p. 425, doi. 10.1515/bpasts-2016-0048

By:

VARDANJANI, M. JAFARI;
ARAEE, A.;
SENKARA, J.;
JAKUBOWSKI, J.;
GODEK, J.

Publication type:

Article

The impact of backing plate thermal conductivity on mechanical properties of friction stir spot welded AA 5052-H32 joints.

Published in:

Archives of Materials Science & Engineering, 2024, v. 130, n. 1, p. 23, doi. 10.5604/01.3001.0054.9709

By:

Widyantono, Y. E.;
Bintoro, S. R.;
Putri, E. D. W. S.;
Triyono;
Muhayat, N.

Publication type:

Article

An investigation on tensile shear strength of CMT spot weld-brazing of 5052 aluminium alloy and SS 400 galvanized steel.

Published in:

Archives of Materials Science & Engineering, 2024, v. 127, n. 2, p. 49, doi. 10.5604/01.3001.0054.7420

By:

Chuvaree, S.;
Janmanee, P.;
Jamkamon, K.;
Mookam, N.

Publication type:

Article

CO<sub>2</sub> laser spot welding of thin sheets AISI 321 austenitic stainless steel.

Published in:

Archives of Materials Science & Engineering, 2020, v. 106, n. 2, p. 68, doi. 10.5604/01.3001.0014.6974

By:

Shehab, A. A.;
Nawi, S. A.;
Al-Rubaiy, A. AAG;
Hammoudi, Z.;
Hafedh, S. A.;
Abass, M. H.;
Alali, M. S.;
Ali, S. D.

Publication type:

Article

72 - Monitoring of stamping by Acoustic Emission (AE).

Published in:

Journal of Acoustic Emission, 2018, v. 35, p. S20

By:

SAIDOUN, Abdelkrim;
HERVE, Catherine

Publication type:

Article

A CASE STUDY - RESISTANCE SPOT WELDING DISTORTIONS ACCORDING TO SEVERAL WELDING SEQUENCES.

Published in:

DAAAM International Scientific Book, 2017, p. 155, doi. 10.2507/daaam.scibook.2017.13

By:

YURCI, C.;
AKDOGAN, A.;
DURAKBASA, N.

Publication type:

Article

Development of Condition Monitoring System for Electric Resistance Spot Welding Used to Manufacture Railway Car Bodies.

Published in:

Journal of Robotics & Mechatronics, 2021, v. 33, n. 2, p. 421, doi. 10.20965/jrm.2021.p0421

By:

Oikawa, Masashi;
Atsumi, Kentaro;
Otsuka, Yosuke;
Kawada, Naoki

Publication type:

Article

Influence of zinc coating on nugget development and mechanical properties in dissimilar welded joints DP600 - AISI304 obtained by the RSW process.

Published in:

Dyna (0012-7353), 2022, v. 89, n. 220, p. 121, doi. 10.15446/dyna.v89n220.95334

By:

Espinel-Hernández, Alejandro;
Sánchez-Orozco, Mario;
Sánchez-Roca, Angel;
Caputi, Lorenzo S.;
Oliveira-Villarinho, Louriel;
Carvajal-Fals, Hipólito

Publication type:

Article

Experimental and FE Modeling Investigation of Spot Welded Thin Steel Sheets.

Published in:

Technical Gazette / Tehnički Vjesnik, 2019, v. 26, n. 1, p. 217, doi. 10.17559/TV-20190113163316

By:

ŽIVKOVIĆ, Miroslav;
VUKOVIĆ, Marina;
LAZIĆ, Vukić;
MILOVANOVIĆ, Vladimir;
DUNIĆ, Vladimir;
KOZAK, Dražan;
RAKIĆ, Dragan

Publication type:

Article

Plastic Formed and Spot Welded Joints Strength of S350GD+Z Steel.

Published in:

Technical Gazette / Tehnički Vjesnik, 2018, v. 25, n. 6, p. 1623, doi. 10.17559/TV-20170321223648

By:

KAŠČÁK, Ľuboš;
MUCHA, Jacek;
WITKOWSKI, Waldemar

Publication type:

Article

The Structure of the Welded Joints between High-Strength Steel USIBOR 22MnB5 and Mild Steel H340LAD+Z140-M-B-O Made by Resistance Spot Welding.

Published in:

Technical Gazette / Tehnički Vjesnik, 2018, v. 25, n. 4, p. 1052, doi. 10.17559/TV-20160928104619

By:

SEJČ, Pavol;
BELANOVÁ, Judita;
EMMER, Štefan

Publication type:

Article

ROBOT PATH OPTIMIZATION FOR SPOT WELDING APPLICATIONS IN AUTOMOTIVE INDUSTRY.

Published in:

Technical Gazette / Tehnički Vjesnik, 2013, v. 20, n. 5, p. 913

By:

Božek, Pavol

Publication type:

Article

长输油气管线动火作业过程的烟囱效应及控制.

Published in:

Journal of China University of Petroleum, 2021, v. 45, n. 5, p. 154, doi. 10.3969/j.issn.1673-5005.2021.05.018

By:

张国梁;
蒋仲安;
王亚朋;
郑登峰;
郝晓燕

Publication type:

Article

Optimization investigation of parameters for spot-welding of AA2014 and AISI316 dissimilar alloys.

Published in:

Welding International, 2024, v. 38, n. 9, p. 639, doi. 10.1080/09507116.2024.2388886

By:

Saravanan;
Joshi, Unnati;
Joshi, Anand Y.;
Thakor, Sanketsinh

Publication type:

Article

Short time resistance spot welding of 1.2Gpa ultra-high strength steel using high frequency power supply.

Published in:

Welding International, 2024, v. 38, n. 2, p. 161, doi. 10.1080/09507116.2023.2275864

By:

Abe, Yohsuke;
Yoshioka, Nobuyori;
Kinoshita, Yoshihito;
Yamane, Satoshi

Publication type:

Article

Effect of plate deformation around the nugget during tensile test on tensile shear strength of resistance spot welded lap joints.

Published in:

Welding International, 2023, v. 37, n. 9, p. 531, doi. 10.1080/09507116.2023.2222958

By:

Kitamura, Takanori;
Akiyama, Tetsuya;
Imamura, Mitsuhiro;
Kawabata, Tomoya;
Uemura, Atsuro;
Mihara, Chinatsu;
Iwatani, Koki

Publication type:

Article

Development of resistance spot welding technology applying multi-stage adaptive control for narrow pitch spot welding of high strength steel sheets.

Published in:

Welding International, 2023, v. 37, n. 9, p. 539, doi. 10.1080/09507116.2023.2228036

By:

Sawanishi, Chikaumi;
Matsuda, Hiroshi;
Okita, Yasuaki;
Ikeda, Rinsei

Publication type:

Article

Effect of strength of steel sheets on peel tensile strength and failure mode of dissimilar joint of spot welds.

Published in:

Welding International, 2023, v. 37, n. 5, p. 295, doi. 10.1080/09507116.2023.2202967

By:

Okada, Tohru;
Ueda, Hideki;
Miyazaki, Yasunobu;
Yasuyama, Masanori;
Fujii, Hidetoshi

Publication type:

Article

Effect of strength of steel sheets on tensile shear strength and failure mode of dissimilar joint of spot welds.

Published in:

Welding International, 2023, v. 37, n. 5, p. 282, doi. 10.1080/09507116.2023.2202949

By:

Okada, Tohru;
Ueda, Hideki;
Matsuda, Kazuki;
Miyazaki, Yasunobu;
Yasuyama, Masanori;
Fujii, Hidetoshi

Publication type:

Article

A parametric study on weld zone shape of resistance spot welded 22MnB5 steel.

Published in:

Welding International, 2023, v. 37, n. 3, p. 142, doi. 10.1080/09507116.2023.2200152

By:

Tuncel, Oguz;
Aydin, Hakan;
Gonul, Alisan

Publication type:

Article

Effect of ferrite grain shape in friction element welds on cross tension strength.

Published in:

Welding International, 2022, v. 36, n. 10, p. 635, doi. 10.1080/09507116.2022.2147700

By:

Matsui, Sho;
Ushioda, Kohsaku;
Fujii, Hidetoshi

Publication type:

Article