Effect of Pt, Pd, Au and Ag on oxidation behaviour of Fe 3 Al intermetallic.
- Published in:
- Corrosion Engineering, Science & Technology, 2016, v. 51, n. 3, p. 179, doi. 10.1179/1743278215Y.0000000045
- By:
- Publication type:
- Article
Works matching DE "SPALLING wear"
Results: 92
1
2
Investigation of the microstructure and friction mechanism of novel CoCrCu<sub>0.2</sub>FeMo<sub>x</sub> high-entropy alloy coating using plasma arc cladding.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 42, p. 19972, doi. 10.1007/s10853-022-07792-7
- By:
- Publication type:
- Article
3
The oxidation behaviour of the pulse plasma sintered β-NiAl intermetallic compound under thermal cycling conditions at 1150 °C.
- Published in:
- Materials & Corrosion / Werkstoffe und Korrosion, 2017, v. 68, n. 2, p. 228, doi. 10.1002/maco.201508804
- By:
- Publication type:
- Article
4
SIMPLIFIED MODELLING OF THE PERFORMANCE OF CONCRETE TUNNELS DURING FIRE AND POST-FIRE DAMAGE CLASSIFICATION.
- Published in:
- Acta Polytechnica CTU Proceedings, 2022, v. 36, p. 253, doi. 10.14311/APP.2022.36.0253
- By:
- Publication type:
- Article
5
FIRE SPALLING SENSITIVITY OF CONCRETE MADE WITH RECYCLED CONCRETE AGGREGATES (RCA).
- Published in:
- Acta Polytechnica CTU Proceedings, 2022, v. 33, p. 168, doi. 10.14311/APP.2022.33.0168
- By:
- Publication type:
- Article
6
Tribological properties of UHMWPE/PAANa/Ph<sub>4</sub>Sn composite materials in seawater lubrication.
- Published in:
- Journal of Polymer Engineering, 2023, v. 43, n. 4, p. 333, doi. 10.1515/polyeng-2022-0234
- By:
- Publication type:
- Article
7
Mechanism and Control of Spalling for Friable Sandstone Pillars in a Room and Pillar Mine.
- Published in:
- Journal of Engineering Science & Technology Review, 2018, v. 11, n. 6, p. 197, doi. 10.25103/jestr.116.25
- By:
- Publication type:
- Article
8
Regression Analysis of Bond Parameters between Corroded Rebar and Concrete Based on Reported Test Data.
- Published in:
- International Journal of Corrosion, 2018, p. 1, doi. 10.1155/2018/5309243
- By:
- Publication type:
- Article
9
Wear Resistance of Heterogeneous Metallic Materials.
- Published in:
- Ekoloji Dergisi, 2019, n. 108, p. 919
- By:
- Publication type:
- Article
10
Estimation of the spall size in a rolling element bearing.
- Published in:
- Insight: Non-Destructive Testing & Condition Monitoring, 2015, v. 57, n. 8, p. 448, doi. 10.1784/insi.2015.57.8.448
- By:
- Publication type:
- Article
11
Types of wear: Abrasive, adhesive, corrosive, surface fatigue and brinelling wear: Friction exists between moving surfaces, causing surface damage and mechanical wear.
- Published in:
- Tribology & Lubrication Technology, 2024, v. 80, n. 12, p. 26
- By:
- Publication type:
- Article
12
Failure Mechanisms and Solutions for Fin-Pass Rolls Repair-Ring at an Electric Resistance Welding Pipe Plant.
- Published in:
- Iranian Journal of Oil & Gas Science & Technology, 2021, v. 10, n. 4, p. 31, doi. 10.22050/ijogst.2021.302007.1609
- By:
- Publication type:
- Article
13
Effect of Spherical WC Content on the Microstructure and Properties of SiCp Aluminium Composite Material.
- Published in:
- Coatings (2079-6412), 2023, v. 13, n. 11, p. 1935, doi. 10.3390/coatings13111935
- By:
- Publication type:
- Article
14
Effect of Energy Density on the Microstructure and Wear Resistance of Nickel-Based WC Coatings by Laser Cladding of Preset Zr702 Alloy Plates.
- Published in:
- Coatings (2079-6412), 2023, v. 13, n. 5, p. 826, doi. 10.3390/coatings13050826
- By:
- Publication type:
- Article
15
A comparison of DIC and grid measurements for processing spalling tests with the VFM and an 80-kpixel ultra-high speed camera.
- Published in:
- European Physical Journal: Special Topics, 2016, v. 225, n. 2, p. 311, doi. 10.1140/epjst/e2015-77777-x
- By:
- Publication type:
- Article
16
Direct numerical simulation of ductile spall failure.
- Published in:
- International Journal of Fracture, 2017, v. 208, n. 1/2, p. 5, doi. 10.1007/s10704-017-0198-y
- By:
- Publication type:
- Article
17
An anisotropic elastoplastic constitutive formulation generalised for orthotropic materials.
- Published in:
- Continuum Mechanics & Thermodynamics, 2018, v. 30, n. 4, p. 825, doi. 10.1007/s00161-018-0645-7
- By:
- Publication type:
- Article
18
Refractory Materials for OAO MMK Degassers and main Areas for Improving their Operating Reliability.
- Published in:
- Refractories & Industrial Ceramics, 2013, v. 54, n. 4, p. 269, doi. 10.1007/s11148-013-9588-5
- By:
- Publication type:
- Article
19
FLEXURAL PROPERTIES OF REACTIVE POWDER CONCRETE AFTER HIGH TEMPERATURE.
- Published in:
- Romanian Journal of Materials / Revista Romana de Materiale, 2018, v. 48, n. 4, p. 491
- By:
- Publication type:
- Article
20
The assessment of crack development in concrete using a terrestrial laser scanner (TLS).
- Published in:
- Australian Journal of Civil Engineering, 2015, v. 13, n. 1, p. 22, doi. 10.1080/14488353.2015.1092635
- By:
- Publication type:
- Article
21
A methodology for evaluating the effects of spalling on the structural capacity of reinforced concrete bridge girders.
- Published in:
- 2014
- By:
- Publication type:
- Case Study
22
Repair of Joint Spalling.
- Published in:
- 2019
- Publication type:
- Question & Answer
23
Numerical simulations of spalling tests in order to investigate material properties of UHPC.
- Published in:
- PAMM: Proceedings in Applied Mathematics & Mechanics, 2014, v. 14, n. 1, p. 137, doi. 10.1002/pamm.201410056
- By:
- Publication type:
- Article
24
Drilling performance of small holes on C<sub>f</sub>/SiC composites with brazed diamond grinding rods.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5485, doi. 10.1007/s00170-024-14013-9
- By:
- Publication type:
- Article
25
Study on abnormal hot corrosion behavior of nickel-based single-crystal superalloy at 900 °C after drilling.
- Published in:
- NPJ Materials Degradation, 2021, v. 5, n. 1, p. 1, doi. 10.1038/s41529-021-00167-4
- By:
- Publication type:
- Article
26
高强高性能混凝土高温后超声检测及压汞分析.
- Published in:
- China Sciencepaper, 2017, v. 12, n. 13, p. 1503
- By:
- Publication type:
- Article
27
Experimentelle Untersuchungen zum Auszugsverhalten von Stahlfasern in höherfesten Betonen.
- Published in:
- Beton- Und Stahlbetonbau, 2014, v. 109, n. 1, p. 43, doi. 10.1002/best.201300049
- By:
- Publication type:
- Article
28
Contribution to the Numerical Modelling of the Spalling Phenomenon: Case of a Reinforced Concrete Beams.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2018, v. 43, n. 4, p. 1747, doi. 10.1007/s13369-017-2704-y
- By:
- Publication type:
- Article
29
Reflow Optimization Process: Thermal Stress Using Numerical Analysis and Intermetallic Spallation in Backwards Compatibility Solder Joints.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2015, v. 40, n. 6, p. 1669, doi. 10.1007/s13369-015-1653-6
- By:
- Publication type:
- Article
30
Further Investigation on the Real Rate Effect of Dynamic Tensile Strength for Concrete-Like Materials.
- Published in:
- Latin American Journal of Solids & Structures, 2016, v. 13, n. 1, p. 201, doi. 10.1590/1679-78251973
- By:
- Publication type:
- Article
31
Influence of Low-Temperature Assisted Ultrasonic Surface Rolling Process on the Friction and Wear Properties of Cr12MoV Die Steel.
- Published in:
- Tribology Transactions, 2025, v. 68, n. 2, p. 379, doi. 10.1080/10402004.2025.2472689
- By:
- Publication type:
- Article
32
Experimental Study on Fretting Wear Behaviors of H62 Brass under Prestressed Conditions.
- Published in:
- Tribology Transactions, 2024, v. 67, n. 6, p. 1180, doi. 10.1080/10402004.2024.2420770
- By:
- Publication type:
- Article
33
Effect of MoO 3 Tabular Crystals on TiAl Matrix Composites under Different Test Loads.
- Published in:
- Tribology Transactions, 2017, v. 60, n. 4, p. 575, doi. 10.1080/10402004.2016.1185560
- By:
- Publication type:
- Article
34
Investigation on Wear Resistance and Fatigue Damage of Laser Cladding Coating on Wheel and Rail Materials under the Oil Lubrication Condition.
- Published in:
- Tribology Transactions, 2016, v. 59, n. 5, p. 810, doi. 10.1080/10402004.2015.1107926
- By:
- Publication type:
- Article
35
Oxidation of ZrB<sub>2</sub> and its composites: a review.
- Published in:
- Journal of Materials Science, 2018, v. 53, n. 21, p. 14885, doi. 10.1007/s10853-018-2601-0
- By:
- Publication type:
- Article
36
Effect of elevated temperatures on concrete incorporating ferronickel slag as fine aggregate.
- Published in:
- Fire & Materials, 2019, v. 43, n. 1, p. 8, doi. 10.1002/fam.2664
- By:
- Publication type:
- Article
37
An empirical model for confined concrete after exposure to high temperature.
- Published in:
- Fire & Materials, 2017, v. 41, n. 7, p. 848, doi. 10.1002/fam.2421
- By:
- Publication type:
- Article
38
The effect of various fire-exposed surface dimensions on the spalling of concrete specimens.
- Published in:
- Fire & Materials, 2015, v. 39, n. 5, p. 545, doi. 10.1002/fam.2256
- By:
- Publication type:
- Article
39
Properties of Concrete at Elevated Temperatures.
- Published in:
- ISRN Civil Engineering, 2014, p. 1, doi. 10.1155/2014/468510
- By:
- Publication type:
- Article
40
Three-dimensional stability analyses and sensitivity studies of the input parameters in a global failure of an open pit slope: a case study.
- Published in:
- Arabian Journal of Geosciences, 2023, v. 16, n. 3, p. 1, doi. 10.1007/s12517-023-11204-8
- By:
- Publication type:
- Article
41
Evaluation of High-Temperature Behavior of Sacrificial Concrete in Nuclear Reactor Core Containment Structures.
- Published in:
- ACI Materials Journal, 2017, v. 114, n. 6, p. 829, doi. 10.14359/51687980
- By:
- Publication type:
- Article
42
Wear Behavior of Ceramic Tools in Longitudinal‐Torsional Ultrasonic Vibration‐Assisted Milling.
- Published in:
- Advanced Engineering Materials, 2025, v. 27, n. 4, p. 1, doi. 10.1002/adem.202402292
- By:
- Publication type:
- Article
43
In Situ Generation of TiCN Ni‐Based Coatings by Laser Cladding and Study of Their Structure and Properties.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 11, p. 1, doi. 10.1002/adem.202301997
- By:
- Publication type:
- Article
44
Online classification for spalling detection and vibratory behavior monitoring.
- Published in:
- Mechanics & Industry, 2014, v. 15, n. 6, p. 517, doi. 10.1051/meca/2014058
- By:
- Publication type:
- Article
45
Vibratory monitoring of a spalling bearing defect in variable speed regime.
- Published in:
- Mechanics & Industry, 2013, v. 14, n. 2, p. 129, doi. 10.1051/meca/2013060
- By:
- Publication type:
- Article
46
Following the growth of a rolling fatigue spalling for predictive maintenance.
- Published in:
- Mechanics & Industry, 2013, v. 14, n. 1, p. 85, doi. 10.1051/meca/2012042
- By:
- Publication type:
- Article
47
Bifurcation of multi-freedom gear system with spalling defect.
- Published in:
- Applied Mathematics & Mechanics, 2013, v. 34, n. 4, p. 475, doi. 10.1007/s10483-013-1684-7
- By:
- Publication type:
- Article
48
Spall Propagation Characteristics of Refurbished VIM-VAR AISI M50 Angular Contact Bearings.
- Published in:
- Journal of Failure Analysis & Prevention, 2017, v. 17, n. 3, p. 426, doi. 10.1007/s11668-017-0259-6
- By:
- Publication type:
- Article
49
Spalling Prevention and Wear Improvement of Rolls in Steel Strip Hot-Rolling Process.
- Published in:
- Journal of Failure Analysis & Prevention, 2015, v. 15, n. 5, p. 626, doi. 10.1007/s11668-015-0011-z
- By:
- Publication type:
- Article
50
Failure of an Aero Engine Ball Bearing Due to Axial Loading.
- Published in:
- Journal of Failure Analysis & Prevention, 2015, v. 15, n. 1, p. 15, doi. 10.1007/s11668-014-9913-4
- By:
- Publication type:
- Article