Works about SHEAR strength

Results: 5000

Effect of thermocycling and surface treatments on the bond strength of a hybrid PICN ceramic.

Published in:

Acta Odontológica Latinoamericana: AOL, 2025, v. 38, n. 1, p. 69, doi. 10.54589/aol.38/1/69

By:

Bayas Salinas, Anggely;
Reascos Flores, Alejandro;
G. Cascante-Calderón, Marcelo;
Villacís Altamirano, Inés M.

Publication type:

Article

Shear bond strength to sound and caries-affected dentin of simplified "etch-and-rinse" and "self-etch" adhesives and the hybrid layer micromorphology.

Published in:

Vojnosanitetski Pregled: Military Medical & Pharmaceutical Journal of Serbia, 2019, v. 76, n. 7, p. 675, doi. 10.2298/VSP161220146D

By:

Drobac, Milan;
Stojanac, Igor;
Ramić, Bojana;
Premović, Milica;
Petrović, Ljubomir

Publication type:

Article

New Characteristics and Bonding Mechanisms of the Directly Bonded W/Cu Plates.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4493, doi. 10.1007/s11837-025-07290-6

By:

Zhang, Pengfei;
He, Huanju;
Zhang, Zhansheng;
Wang, Biao;
Li, Zhengao;
Lin, Tiesong;
Yang, Zhihua

Publication type:

Article

The Rate-Dependent Shear Performance of Ni-Stabilized SAC/Cu Joints Under Isothermal Aging.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4173, doi. 10.1007/s11837-025-07209-1

By:

Li, Quanzhen;
Li, Chengming;
Wang, Xiaojing;
Cai, Shanshan;
Liu, Ning;
Liu, Chen;
Sun, Shaofu

Publication type:

Article

Fabrication of Al/Basalt Fiber Composites Fabricated by Thixomixing and Investigation of the Mechanical Properties and Microstructural Evolution: Fabrication of Al/Basalt Fiber Composites Fabricated by Thixomixing and Investigation of the Mechanical Properties and Microstructural Evolution: Tao, Boroomand, and Nie

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 5, p. 3772, doi. 10.1007/s11837-025-07257-7

By:

Tao, Keke;
Boroomand, Sahar;
Nie, Fang

Publication type:

Article

Diffusion Interface Evolution of Low-Alloy Steel Q235 and Ti by Electro-Assisted Hot-Pressing Bond: Diffusion Interface Evolution of Low-Alloy Steel Q235 and Ti by Electro-Assisted Hot-Pressing Bond: Song, Kang, Liao, Zhang, and Chou.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 4, p. 1756, doi. 10.1007/s11837-024-06913-8

By:

Song, Cheng-Min;
Kang, Lei;
Liao, Xiang-Wei;
Zhang, Guo-Hua;
Chou, Kuo-Chih

Publication type:

Article

Microstructure and Mechanical Property of Titanium Film-Modified Sapphire/High Nb-TiAl Alloy Joints Using Ag-Cu Filler by Vacuum Brazing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 12, p. 7304, doi. 10.1007/s11837-024-06871-1

By:

Chen, S. F.;
Wang, Y. S.;
Sun, D. B.;
Xing, X. G.;
Gao, J.;
Hei, H. J.;
Wang, Y. L.;
Yu, S. W.;
Lin, J. P.

Publication type:

Article

Effect of Multi-component Alloy Interlayer on Interfacial Microstructure and Shear Strength of Titanium/Bronze Bimetal.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 9, p. 5258, doi. 10.1007/s11837-024-06670-8

By:

Sun, Lixing;
Zhang, Rongyan;
Liang, Shuhua;
Ni, Lei;
Jiang, Qi;
Chen, Jiabao;
Zhang, Yihao;
Zou, Juntao

Publication type:

Article

A Study on Stepped Clinching of AA5052/1060 Dissimilar Aluminum Alloy Sheets: Process, Joint Configuration, and Strength.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 6, p. 3205, doi. 10.1007/s11837-024-06557-8

By:

Fan, Zongkai;
Chen, Chao

Publication type:

Article

Microstructural, Mechanical, Texture and Corrosion Properties of Severely Deformed AZ31 Alloy with Sr Addition.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2351, doi. 10.1007/s11837-023-05786-7

By:

Sadrkhah, Mohammadreza;
Majidabad, Milad Aali;
Mesbah, Mohsen;
Sadeghi, Alireza;
Faraji, Ghader

Publication type:

Article

Microstructure and Properties of SiC Whisker Reinforced Sn-0.3Ag-0.7Cu Solder Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 6, p. 1864, doi. 10.1007/s11837-023-05748-z

By:

Zhang, Hehe;
Yang, Man;
Yin, Limeng;
Zhang, Long;
Cai, Xinan;
Chai, Sensen;
Zhang, Liping;
Wang, Gang;
Xiao, Yuchen

Publication type:

Article

Effect of Explosive Loading Ratio on Microstructure and Mechanical Properties of Al 5052/AZ31B Explosive Weld Composite.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 1, p. 167, doi. 10.1007/s11837-022-05579-4

By:

Kumar, Prabhat;
Ghosh, Subrata Kumar;
Saravanan, S.;
Barma, John Deb

Publication type:

Article

Parametric Optimization of Diffusion Welding Process in Joining of CoCrNi Medium-Entropy Alloys (MEA) and SUS 304 Stainless Steel Using Full Factorial Design.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 11, p. 4280, doi. 10.1007/s11837-022-05500-z

By:

Samiuddin, Muhammad;
Li, Jinglong;
Muzamil, Muhammad;
Khan, Saqib;
Xiong, Jiangtao

Publication type:

Article

Effect of Low Bi Content on Reliability of Sn-Bi Alloy Joints Before and After Thermal Aging.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 4, p. 1751, doi. 10.1007/s11837-021-05146-3

By:

Nishikawa, Hiroshi;
Hirata, Yuki;
Yang, Chih-han;
Lin, Shih-kang

Publication type:

Article

Stress- and Time-Dependent Formation of Self-Lubricating In Situ Carbon (SLIC) Films on Catalytically-Active Noble Alloys.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 11, p. 3658, doi. 10.1007/s11837-021-04809-5

By:

Jones, Morgan R.;
DelRio, Frank W.;
Beechem, Thomas E.;
McDonald, Anthony E.;
Babuska, Tomas F.;
Dugger, Michael T.;
Chandross, Michael;
Argibay, Nicolas;
Curry, John F.

Publication type:

Article

Influence of Bonding Temperature on Interfacial Microstructure and Properties of Hypereutectic Al-Si Joints with Cu Interlayer.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 2, p. 609, doi. 10.1007/s11837-020-04512-x

By:

Wang, Haibo;
Chen, Hongsheng;
Sun, Qingzhu;
Wang, Benju;
Yang, Cheng

Publication type:

Article

Preparation of 2024-Al/AZ31-Mg Laminated Composite by Powder Metallurgy Integrated Forming and Sintering.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 10, p. 3547, doi. 10.1007/s11837-020-04303-4

By:

Wang, Tao;
Huang, Yufeng;
Yang, Lun;
Ma, Yunzhu;
Wu, Lei;
Yan, Huanyuan;
Liu, Yang;
Liu, Wensheng

Publication type:

Article

Modeling the Effects of Filler Network and Interfacial Shear Strength on the Mechanical Properties of Carbon Nanotube-Reinforced Nanocomposites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 6, p. 2184, doi. 10.1007/s11837-020-04083-x

By:

Zare, Yasser;
Rhee, Kyong Yop

Publication type:

Article

Friction Stir Lap Welding of Mg/Ti Dissimilar Alloys Using a Slight Penetration Depth.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 4, p. 1589, doi. 10.1007/s11837-019-03959-x

By:

Ji, Shude;
Hu, Wei;
Ma, Zhongwei;
Li, Qinghua;
Gong, Xue

Publication type:

Article

Compression Brazing of SiCp/Al Composite Using a Semisolid Zn-Al-Cu Filler Metal Based on the Strain-Induced Melt Activation Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 12, p. 4931, doi. 10.1007/s11837-019-03791-3

By:

Xiao, Jing;
Li, Shun;
Bai, Shuxin;
Yan, Jiuchun;
Xiong, Degan;
Tang, Yu

Publication type:

Article

Rapid Formation of Full Intermetallic Bondlines for Die Attachment in High-Temperature Power Devices Based on Micro-sized Sn-Coated Ag Particles.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 9, p. 3049, doi. 10.1007/s11837-019-03544-2

By:

Yu, Fuwen;
Liu, Hao;
Hang, Chunjin;
Chen, Hongtao;
Li, Mingyu

Publication type:

Article

Thermal Cycling of Sintered Silver (Ag) Joint as Die-Attach Material.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 9, p. 3066, doi. 10.1007/s11837-019-03461-4

By:

Siow, K. S.;
Chua, S. T.

Publication type:

Article

Low-Temperature High-Frequency Induction Brazing of 5052 Aluminum Alloy to Stainless Steel with Sn-Zn Solder.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 5, p. 1785, doi. 10.1007/s11837-018-3280-7

By:

Yu, Gaoyang;
Chen, Shuhai;
Hai, Lu;
Huang, Jihua;
Yang, Jian

Publication type:

Article

A Two-Stage Variable Pressure Diffusion Bonding for Manufacturing High-Precision Steel Hollow Structural Components.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 3, p. 1175, doi. 10.1007/s11837-018-3300-7

By:

Zhang, C.;
Li, H.;
Li, M.

Publication type:

Article

Experimental Investigation on Mechanical and Thermal Properties of Marble Dust Particulate-Filled Needle-Punched Nonwoven Jute Fiber/Epoxy Composite.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 7, p. 1284, doi. 10.1007/s11837-018-2828-x

By:

Sharma, Ankush;
Patnaik, Amar

Publication type:

Article

Microstructure and Fatigue Properties of Ultrasonic Spot Welded Joints of Aluminum 5754 Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 5, p. 1465, doi. 10.1007/s11837-015-1796-7

By:

Mirza, F.;
Macwan, A.;
Bhole, S.;
Chen, D.

Publication type:

Article

Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2015, v. 67, n. 5, p. 1183, doi. 10.1007/s11837-015-1367-y

By:

Torres, Jonathan;
Cotelo, José;
Karl, Justin;
Gordon, Ali

Publication type:

Article

An Investigation of the Effects of Parameters on the Development of Nuggets and the Tensile Properties of IN-625 During Resistance Spot Welding.

Published in:

Experimental Techniques, 2024, v. 48, n. 4, p. 735, doi. 10.1007/s40799-023-00692-8

By:

Mashhuriazar, A.;
Mirsalehi, S. E.;
Moradi, K.

Publication type:

Article

Spot Joining of PVC to Aluminum Sheets via Cold Forward Extrusion.

Published in:

Experimental Techniques, 2024, v. 48, n. 4, p. 677, doi. 10.1007/s40799-023-00688-4

By:

Abdullah, I.T.;
Ridha, M.H.;
Mejbel, M.K.;
Hussein, S.K.

Publication type:

Article

Experimental Study on Mechanical Behavior of Sand Improved by Polyurethane Foam.

Published in:

Experimental Techniques, 2023, v. 47, n. 6, p. 1201, doi. 10.1007/s40799-023-00633-5

By:

Ghasemi, M.;
Bayat, M.

Publication type:

Article

Correction to: Effect of Anodizing Process on Inter Laminar Shear Strength of GLARE Composite through T-Peel Test: Experimental and Numerical Approach.

Published in:

2022

By:

Khalid, M.Y.;
Al Rashid, A.;
Sheikh, M.F.

Publication type:

Correction Notice

The Failure Mechanism of 3D C/C Composite Under Compression-Shear Coupled Loads: An Experimental Study.

Published in:

Experimental Techniques, 2020, v. 44, n. 3, p. 275, doi. 10.1007/s40799-019-00351-x

By:

Xu, C.;
Yang, Q.;
Jin, H.;
Meng, S.;
Han, X.

Publication type:

Article

Fuzzy Logic Model System for Prediction of Process Parameters by Plasma Assisted Diffusion Bonding of Dissimilar Alloys.

Published in:

Experimental Techniques, 2019, v. 43, n. 1, p. 105, doi. 10.1007/s40799-018-0273-y

By:

Ananthakumar, K.;
Kumaran, S.

Publication type:

Article

Development of a Soft-Rock Weathering Test Apparatus.

Published in:

Experimental Techniques, 2014, v. 38, n. 2, p. 54, doi. 10.1111/j.1747-1567.2011.00788.x

By:

Zhang, B.Y.;
Zhang, J.H.;
Sun, G.L.

Publication type:

Article

Seismic Behavior of a Partially Infilled RC Frame Retrofitted Using GFRP Laminates.

Published in:

Experimental Techniques, 2012, v. 36, n. 5, p. 82, doi. 10.1111/j.1747-1567.2011.00714.x

By:

Jayaguru, C.;
Subramanian, K.

Publication type:

Article

Comfort characteristics of cotton hollow yarn knitted fabrics: Part 5--Low stress mechanical properties.

Published in:

Man-Made Textiles in India, 2019, v. 47, n. 3, p. 88

By:

Senthilkumar, P.

Publication type:

Article

Effect of the degree of LAD stenosis on 'competitive flow' and flow field characteristics in LIMA-to-LAD bypass surgery.

Published in:

Medical & Biological Engineering & Computing, 2012, v. 50, n. 8, p. 839, doi. 10.1007/s11517-012-0927-3

By:

Swillens, Abigail;
Witte, Marloes;
Nordgaard, Håvard;
Løvstakken, Lasse;
Loo, Denis;
Trachet, Bram;
Vierendeels, Jan;
Segers, Patrick

Publication type:

Article

On the Training Algorithms for Artificial Neural Network in Predicting the Shear Strength of Deep Beams.

Published in:

Complexity, 2021, p. 1, doi. 10.1155/2021/5548988

By:

Nguyen, Thuy-Anh;
Ly, Hai-Bang;
Mai, Hai-Van Thi;
Tran, Van Quan

Publication type:

Article

Shear Mechanical Properties Prediction Method and Simulation Calculation Model of Aging NEPE Propellant Adhesive Interface.

Published in:

Propellants, Explosives, Pyrotechnics, 2025, v. 50, n. 6, p. 1, doi. 10.1002/prep.12052

By:

Zhou, Kunlin;
Shen, Zhibin;
Fan, Zijian;
Ye, Guanlin;
Yu, Peng

Publication type:

Article

Mechanical Properties of HTPB Propellant under Shear Loading at Low Temperature.

Published in:

Propellants, Explosives, Pyrotechnics, 2022, v. 47, n. 2, p. 1, doi. 10.1002/prep.202100260

By:

Wang, Jia‐xiang;
Qiang, Hong‐fu;
Wang, Zhe‐jun

Publication type:

Article

High-Shear-Strength Waterborne Polyurethane/Acrylic Soft Adhesives.

Published in:

Macromolecular Materials & Engineering, 2013, v. 298, n. 6, p. 612, doi. 10.1002/mame.201200106

By:

Degrandi‐Contraires, Elise;
Lopez, Aitziber;
Reyes, Yuri;
Asua, José M.;
Creton, Costantino

Publication type:

Article

An Efficiently Reworkable Thermosetting Adhesive Based on Photoreversible [4+4] Cycloaddition Reaction of Epoxy‐Based Prepolymer with Four Anthracene End Groups.

Published in:

Macromolecular Chemistry & Physics, 2021, v. 222, n. 2, p. 1, doi. 10.1002/macp.202170003

By:

Liu, Ziyu;
Cheng, Jue;
Zhang, Junying

Publication type:

Article

Thermal curing kinetics of urea-formaldehyde resin modified by hydroxyapatite.

Published in:

Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 3, p. 1047, doi. 10.1007/s10973-023-12742-9

By:

Chen, Kexin;
Zheng, Wenyu;
Chen, Yuzhu;
Xiao, Hui

Publication type:

Article

A polyphosphate amide synthesized by a solvent-free route to enhance the flame retardancy and toughness of epoxy resins.

Published in:

Journal of Thermal Analysis & Calorimetry, 2023, v. 148, n. 21, p. 11707, doi. 10.1007/s10973-023-12517-2

By:

Li, Xiaobei;
Chen, Jinxuan;
Wu, Lianfeng;
Wang, Junjun;
Wang, Bo;
Jiang, Shengling;
Gu, Xiaoyu;
Zhang, Sheng

Publication type:

Article

The influence of concentrated solar energy flux on the structure and properties of stainless steel brazed joints.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 141, n. 4, p. 1291, doi. 10.1007/s10973-019-09113-8

By:

Luca, Mihai Alexandru;
Tierean, Mircea Horia;
Machedon Pisu, Teodor;
Rodriguez, Jose;
Croitoru, Catalin

Publication type:

Article

Fabrication of TiCN–HfC/TiCN–WC–Cr3C2 laminated ceramics with a novel structure—wave layers.

Published in:

Journal of Materials Science, 2025, v. 60, n. 22, p. 9068, doi. 10.1007/s10853-025-11018-x

By:

Lu, Changlong;
Gao, Jiaojiao;
Song, Jinpeng;
Wang, Zhuo;
Zhao, Jian

Publication type:

Article

Preparation of lightweight and energy absorption polyurethane power battery sealants.

Published in:

Journal of Materials Science, 2025, v. 60, n. 21, p. 8781, doi. 10.1007/s10853-025-10986-4

By:

Gao, Xiongzhuang;
Ma, Xingyuan;
Xue, Xinyuan;
Lin, Lu

Publication type:

Article

The effect of MXene on the mechanical and electromagnetic interference shielding features of carbon fabric/epoxy scalable laminated composites.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 7965, doi. 10.1007/s10853-025-10924-4

By:

Yuksel Yilmaz, Ayten Nur;
Bedeloglu, Ayse Celik;
Yunus, Doruk Erdem

Publication type:

Article

Effect of titanium/steel composite interfacial structural modification on intermetallic compounds growth behavior and mechanical properties.

Published in:

Journal of Materials Science, 2025, v. 60, n. 7, p. 3576, doi. 10.1007/s10853-025-10682-3

By:

Lei, Xiaoling;
Ding, Wenhong;
Chen, Zhuang;
Guo, Lu;
Wang, Chenxu;
Fu, Yongzhi;
Deng, Keke

Publication type:

Article

Effect of electric pulse auxiliary reflow soldering on the microstructure and properties of Sn58Bi/Cu solder joints.

Published in:

Journal of Materials Science, 2025, v. 60, n. 2, p. 922, doi. 10.1007/s10853-024-10549-z

By:

Zhao, Jin;
Ji, Xiao-liang;
He, Jin-jiang;
Hou, Zhi-chao;
Song, Yao;
Zhu, Hong-lei;
Liu, Bing-rui;
Jia, Qiang;
Wang, Yi-shu

Publication type:

Article