Works about SHAPE memory alloys

Results: 3167

Design, Analysis and Prototype Testing of a Non-explosive Self-deploying Wing Actuated by NiTi Shape Memory Alloy Wires.

Published in:

Chinese Journal of Mechanical Engineering, 2025, v. 38, n. 1, p. 1, doi. 10.1186/s10033-025-01230-w

By:

Huang, Bin;
Wang, Jun;
Gu, Xiaojun;
Zhu, Jihong;
Zhang, Weihong

Publication type:

Article

Exploring the Effect of Carbon Addition on the Mechanical and Thermal Behavior of Cu-11Al-5Ni Shape Memory Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4807, doi. 10.1007/s11837-025-07313-2

By:

El-Tahawy, M.;
Soliman, H. N.;
Hammad, A. E.;
Amin, M.

Publication type:

Article

Role of Rare-Earth Cerium in Martensitic Transformation and Magnetic Properties of Cu-Al-Mn Alloys.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4760, doi. 10.1007/s11837-025-07292-4

By:

Özkul, İskender;
Kalay, Ece;
Karaduman, Oktay;
Kizilgün, Yasİn;
Güler, Ömer;
Canbay, Canan Aksu

Publication type:

Article

Plasticity Bridges Microscale Martensitic Shear Bands in Superelastic Nitinol.

Published in:

Experimental Mechanics, 2025, v. 65, n. 5, p. 699, doi. 10.1007/s11340-025-01161-6

By:

Christison, A.;
Paranjape, H. M.;
Daly, S.

Publication type:

Article

Multi-scale and Multifunctional Coatings and Interfaces for Tribological Contacts.

Published in:: 2025
Publication type:: Book Review

Seismic Performance Analysis for an Eccentrically Braced Frame (EBF) with an Innovative Self-Centering Shear Link.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1471, doi. 10.3390/buildings15091471

By:

Xu, Xinyu;
Huang, Lifen;
Liu, Shangwen;
Zhang, Bo;
Hu, Shujun

Publication type:

Article

Fabrication and characterization of vacuum induction-melted cast NiTiCu shape memory alloy.

Published in:

Journal of Mechanical Science & Technology, 2025, v. 39, n. 5, p. 2681, doi. 10.1007/s12206-025-0427-7

By:

Om, Hari;
Singh, Shankar

Publication type:

Article

Using Taguchi Technique to Study the Effect of Adding Copper Nano on Shape Recovery for Smart Alloy (CU-AL-NI).

Published in:

Journal of Engineering (17264073), 2025, v. 31, n. 5, p. 35, doi. 10.31026/j.eng.2025.05.03

By:

Abdaljabar, Dilsuz A.;
Ahmed AL-Khafaji, Ahmed Abdulrasool

Publication type:

Article

A hybrid fuzzy logic proportional-integral-derivative and conventional on-off controller for morphing wing actuation using shape memory alloy Part 2: Controller implementation and validation.

Published in:

Aeronautical Journal, 2012, v. 116, n. 1179, p. 451, doi. 10.1017/S0001924000006989

By:

Grigorie, T. L.;
Botez, A. M.;
Popov, A. V.;
Mamou, M.;
Mébarki, Y.

Publication type:

Article

A hybrid fuzzy logic proportional-integral-derivative and conventional on-off controller for morphing wing actuation using shape memory alloy Part 1: Morphing system mechanisms and controller architecture design.

Published in:

Aeronautical Journal, 2012, v. 116, n. 1179, p. 433, doi. 10.1017/S0001924000006977

By:

Grigorie, T. L.;
Botez, A. M.;
Popov, A. V.;
Mamou, M.;
Mébarki, Y.

Publication type:

Article

Development of a proof-of-concept aircraft smart control system.

Published in:

Aeronautical Journal, 2009, v. 113, n. 1147, p. 587, doi. 10.1017/S0001924000003249

By:

Hutapea, P.;
Jacobs, K.;
Harper, M.;
Meyer, E.;
Roth, B.

Publication type:

Article

Effect of PZT doping amount on microstructure and properties of Fe-based memory alloy composite coating by laser cladding.

Published in:

Surface Engineering, 2021, v. 37, n. 4, p. 482, doi. 10.1080/02670844.2020.1760560

By:

Liu, Changyu;
Xu, Peng;
Zheng, Deyi;
Liu, Qibin

Publication type:

Article

Corrosion behaviour of TiC/N coating prepared by plasma electrolytic saturation on NiTi.

Published in:

Surface Engineering, 2021, v. 37, n. 2, p. 197, doi. 10.1080/02670844.2020.1727686

By:

Chitsaz-Khoyi, Leila;
Khalil-Allafi, Jafar;
Etminanfar, Mohamadreza

Publication type:

Article

Microstructure and properties of ZrTiC(N) composite films on NiTi alloy.

Published in:

Surface Engineering, 2014, v. 30, n. 11, p. 860, doi. 10.1179/1743294414Y.0000000340

By:

Chu, C. L.;
Yu, F. D.;
Lin, P. H.;
Yin, L. H.;
Pu, Y. P.;
Chu, P. K.

Publication type:

Article

Shape Memory Alloy Actuators for Controlled Movement of an Automotive Spoiler.

Published in:

Macromolecular Symposia, 2024, v. 413, n. 3, p. 1, doi. 10.1002/masy.202300187

By:

Battaglia, Miriam;
Sellitto, Andrea;
Riccio, Aniello

Publication type:

Article

Structural Transformation and Hysteresis Behaviour of Ni46Cu4Mn45Sn5 Alloy Synthesized by Ball Milling Method.

Published in:

Macromolecular Symposia, 2017, v. 376, n. 1, p. n/a, doi. 10.1002/masy.201700015

By:

Saini, Dinesh;
Singh, Satyavir;
Banerjee, M. K.;
Sachdev, K.

Publication type:

Article

Poly(ε‐caprolactone) and Poly(ω‐pentadecalactone)‐Based Networks with Two‐Way Shape‐Memory Effect through [2 + 2] Cycloaddition Reactions.

Published in:

2018

By:

Pilate, Florence;
Stoclet, Gregory;
Mincheva, Rosica;
Dubois, Philippe;
Raquez, Jean‐Marie

Publication type:

Correction Notice

Simulating the Shape-Memory Behavior of Amorphous Switching Domains of Poly( L-lactide) by Molecular Dynamics.

Published in:

Macromolecular Chemistry & Physics, 2013, v. 214, n. 11, p. 1273, doi. 10.1002/macp.201200450

By:

Ghobadi, Ehsan;
Heuchel, Matthias;
Kratz, Karl;
Lendlein, Andreas

Publication type:

Article

Temperature-Induced Switchable Adhesion using Nickel-Titanium-Polydimethylsiloxane Hybrid Surfaces.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 20, p. 3013, doi. 10.1002/adfm.201500437

By:

Frensemeier, Mareike;
Kaiser, Jessica S.;
Frick, Carl P.;
Schneider, Andreas S.;
Arzt, Eduard;
Fertig, Ray S.;
Kroner, Elmar

Publication type:

Article

Coupling of Micromagnetic and Structural Properties Across the Martensite and Curie Temperatures in Miniaturized Ni-Mn-Ga Ferromagnetic Shape Memory Alloys.

Published in:

Advanced Functional Materials, 2014, v. 23, n. 37, p. 4694, doi. 10.1002/adfm.201300165

By:

Jakob, A. M.;
Hennes, M.;
Müller, M.;
Spemann, D.;
Mayr, S. G.

Publication type:

Article

Magnetomechanical Four-State Memory.

Published in:

Advanced Functional Materials, 2013, v. 23, n. 32, p. 3995, doi. 10.1002/adfm.201203015

By:

Watson, Chad S.;
Hollar, Courtney;
Anderson, Kimball;
Knowlton, William B.;
Müllner, Peter

Publication type:

Article

Sensors: A Printable Optical Time-Temperature Integrator Based on Shape Memory in a Chiral Nematic Polymer Network (Adv. Funct. Mater. 21/2013).

Published in:

Advanced Functional Materials, 2013, v. 23, n. 21, p. 2665, doi. 10.1002/adfm.201370102

By:

Davies, Dylan J. D.;
Vaccaro, Antonio R.;
Morris, Stephen M.;
Herzer, Nicole;
Schenning, Albertus P. H. J.;
Bastiaansen, Cees W. M.

Publication type:

Article

A shape memory alloy bimorph-actuated switch for antenna reconfiguration.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 7, p. 4426, doi. 10.1007/s10854-021-07634-3

By:

Geetha, M.;
Dhanalakshmi, K.;
Vetriselvi, V.

Publication type:

Article

Lagging temperature problem in DTA/DSC measurement on investigation of NiTi SMA.

Published in:

Journal of Materials Science: Materials in Electronics, 2020, v. 31, n. 16, p. 13284, doi. 10.1007/s10854-020-03881-y

By:

Canbay, Canan Aksu;
Karaduman, Oktay;
Özkul, İskender

Publication type:

Article

A modified phase‐based constitutive model for shape memory polymers.

Published in:

Polymer International, 2018, v. 67, n. 12, p. 1677, doi. 10.1002/pi.5698

By:

Pan, Zhouzhou;
Zhou, Yu;
Zhang, Ni;
Liu, Zishun

Publication type:

Article

Corrosion News.

Published in:: 2015
Publication type:: Other

Enhancement of interfacial shear strength of shape memory alloy–polylactic acid composite and predictive modeling through cohesive zone modeling approach for 4D printing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 1, p. 81, doi. 10.1007/s00170-024-14506-7

By:

Ladakhan, Saiyadali Hajaresab;
Rajan, Ramesh Sundar;
James, Isaac;
Sreesha, Rakshith Bangalore;
Kumar, Rituraj;
Adinarayanappa, Somashekara Makireddypalli

Publication type:

Article

Research progress in biomimetic surface processing technology with adaptive control functions.

Published in:

2025

By:

Zhou, Yingluo;
Lin, Ouchuan;
Cui, Xuejing;
Tang, Hao

Publication type:

Literature Review

Post-processing treatment of Wire Arc Additive Manufactured NiTi shape memory alloy using laser shock peening process: a study on tensile behavior and fractography analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 7/8, p. 3315, doi. 10.1007/s00170-025-15058-0

By:

Thangamani, Geethapriyan;
Tamang, Santosh Kumar;
Patel, Md Saad;
Narayanan, Jinoop Arackal;
Pallagani, Jeevankumar;
Rose, Poly;
Gianchandani, Pardeep Kumar;
Thirugnanasambandam, Arunkumar;
Anand, Palani Iyamperumal

Publication type:

Article

Study on the surface integrity of ultrasonic cavitation-assisted WEDM-LS under Rayleigh-Plesset model.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 409, doi. 10.1007/s00170-024-14576-7

By:

Wang, Yan;
Jin, Ruiqi;
Chen, Yizhang;
Xiong, Wei;
Li, Bingchu;
Jiang, Lingxiao

Publication type:

Article

Investigation into microdefects and corrosion resistance of nickel-titanium shape memory alloy using electrical discharge coating process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2587, doi. 10.1007/s00170-024-13507-w

By:

Mansor, Ahmad Fairuz;
Azmi, Azwan Iskandar;
Ismail, Sikiru Oluwarotimi

Publication type:

Article

Multi-objective optimization of process parameters for laser metal deposition of NiTi shape memory alloy based on neural network and genetic algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 9/10, p. 4663, doi. 10.1007/s00170-024-12974-5

By:

Gao, Jiali;
Wang, Xu;
Wang, Chi;
Hao, Yunbo;
Liang, Xudong;
Li, Weiqi;
Zhao, Kai

Publication type:

Article

Enhancing mechanical and damping performance of 3D-printed aluminium-7075 with shape memory high-entropy alloy (SMHEA): parametric optimization and mathematical modeling.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 1/2, p. 369, doi. 10.1007/s00170-023-12651-z

By:

Akinwande, Abayomi Adewale;
Moskovskikh, Dmitry;
Romanovski, Valentin

Publication type:

Article

Study on removal of recast layer of NiTi shape memory alloy machined with magnetic field-assisted WEDM-ECM complex process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 9/10, p. 4335, doi. 10.1007/s00170-023-12588-3

By:

Wang, Yan;
Tang, Cai-Cong;
Chai, Hua-Yi;
Chen, Yi-Zhang;
Jin, Rui-Qi;
Xiong, Wei

Publication type:

Article

Enhancing joint strength: investigating different interlayer effects on Ultrasonic spot–welded NiTi/304 stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 5/6, p. 2813, doi. 10.1007/s00170-023-12484-w

By:

Chen, Yi;
Cheng, Mingpeng;
Liu, Chao;
Li, Yang;
Luo, Zhen;
Ao, Sansan

Publication type:

Article

Castability of Cu-Al-Mn shape memory alloy in a rapid investment casting process: computational and experimental analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 5/6, p. 2563, doi. 10.1007/s00170-023-11672-y

By:

da Silva Albuquerque, Carlos Eduardo;
Grassi, Estephanie Nobre Dantas;
De Araújo, Carlos José

Publication type:

Article

Machinability of nickel-titanium shape memory alloys under dry and chilled air cutting conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 9/10, p. 4675, doi. 10.1007/s00170-023-11373-6

By:

Zailani, Zainal Abidin;
Mativenga, Paul Tarisai

Publication type:

Article

Research on imminent enlargements of smart materials and structures towards novel 4D printing (4DP: SMs-SSs).

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 7/8, p. 2803, doi. 10.1007/s00170-023-11180-z

By:

Farid, Muhammad Imran;
Wu, Wenzheng;
Guiwei, Li;
Yu, Zhao

Publication type:

Article

One-shot additive manufacturing of robotic finger with embedded sensing and actuation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 1/2, p. 467, doi. 10.1007/s00170-022-10556-x

By:

Stano, Gianni;
Ovy, S M Al Islam;
Edwards, Jakob Ryan;
Cianchetti, Matteo;
Percoco, Gianluca;
Tadesse, Yonas

Publication type:

Article

Wire electrode insulation method for stray current and overcut reduction during WECM—a novel approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 11/12, p. 3917, doi. 10.1007/s00170-022-10381-2

By:

Besekar, Naresh;
Bhattacharyya, Bijoy

Publication type:

Article

An experimental investigation on performance of NiTi-based shape memory alloy 4D printed actuators for bending application.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 11/12, p. 4421, doi. 10.1007/s00170-022-09875-w

By:

Sreesha, Rakshith B.;
Ladakhan, Saiyadali H.;
Mudakavi, Deepak;
M Adinarayanappa, Somashekara

Publication type:

Article

Study on preparation and stiffness of NiTi shape memory alloy/2A12 aluminum alloy laminated structure.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 4179, doi. 10.1007/s00170-022-10026-4

By:

Cheng, Qi;
Guo, Ning;
Fu, Yunlong;
Zhang, Di;
Zhang, Shuai;
Zhang, Xin;
Chen, Hao;
Wang, Lei;
He, Jinlong

Publication type:

Article

TIG spot welding applied to NiTi shape memory wires optimized by factorial design.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 11/12, p. 7749, doi. 10.1007/s00170-022-09848-z

By:

Rodrigues, Luiz Fernando Alves;
Amorim, Fernando Andrade;
Grassi, Estephanie Nobre Dantas;
dos Santos, Pedro Luiz Lima;
de Araújo, Carlos José

Publication type:

Article

Study of the electrochemical dissolution behavior of Nitinol shape memory alloy in different electrolytes for micro-ECM process.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 9/10, p. 7019, doi. 10.1007/s00170-022-09802-z

By:

Sethi, Abhijeet;
Acharya, Biswesh Ranjan;
Saha, Partha

Publication type:

Article

Study on machining characteristics of VUV-MF assisted WEDM-LS based on flow field and temperature field analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 4431, doi. 10.1007/s00170-022-09556-8

By:

Wang, Yan;
Wu, Cheng Zhen;
Tang, Cai Cong;
Jin, Rui Qi;
Jiang, Ling Xiao

Publication type:

Article

Study on the effect of double-sided laser welding of NiTi shape memory alloys wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 8201, doi. 10.1007/s00170-022-09254-5

By:

Ge, Fuguo;
Zeng, Zhi;
Peng, Bei;
Teshome, Fissha Biruke;
Chen, Long

Publication type:

Article

Investigation of high speed cutting performance and phase transformation behavior of NiTi shape memory alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 1/2, p. 489, doi. 10.1007/s00170-021-08254-1

By:

Kaya, Eren;
Kaya, İrfan

Publication type:

Article

The role of scanning velocity on laser cladding of NiTi alloy onto stainless steel 316L substrate.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2029, doi. 10.1007/s00170-021-07112-4

By:

Zarghami, Kian;
Khademzadeh, Saeed;
Parvin, Nader;
Azarmehr, Yashar

Publication type:

Article

Investigation on machinability of NiTi shape memory alloys under different cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1913, doi. 10.1007/s00170-021-07563-9

By:

Zhao, Yanzhe;
Guo, Kai;
Li, Jianfeng;
Sun, Jie

Publication type:

Article

Additive manufacturing landscape and materials perspective in 4D printing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 9/10, p. 2973, doi. 10.1007/s00170-021-07233-w

By:

Farid, Muhammad Imran;
Wu, Wenzheng;
Liu, Xilin;
Wang, PeiPei

Publication type:

Article