Works about POWDER metallurgy

Results: 5000

Hydrogen Storage Properties of Mg-BCC Composite.

Published in:

International Journal of Green Energy, 2009, v. 6, n. 6, p. 607, doi. 10.1080/15435070903364715

By:

Ranjbar, A.;
Guo, Z.P.;
Yu, X.B.;
Calka, A.;
Liu, H.K.

Publication type:

Article

Measurements, Theories and Simulations of Particle Deposits on Super-Heater Tubes in a CFB Biomass Boiler.

Published in:

International Journal of Green Energy, 2006, v. 3, n. 1, p. 43, doi. 10.1080/01971520500439492

By:

Sandberg, Jan;
Sand, Ulf;
Bel Fdhila, Rebei

Publication type:

Article

Microstructural Evolution and Mechanical Performance of Magnesium-Niobium Composites with Potential for Biomedical Applications: Microstructural Evolution and Mechanical Performance of Magnesium-Niobium Composites with Potential for Biomedical Applications: Aljabr and Bose

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 5, p. 2779, doi. 10.1007/s11837-025-07198-1

By:

Aljabr, Rawad Yaqoub;
Bose, P. S. C.

Publication type:

Article

Investigation of Microstructure, Mechanical, and Tribological Behaviors of AA7075 Reinforced with B4C Composites Developed Through Floating Die: Investigation of Microstructure, Mechanical, and Tribological Behaviors of AA7075 Reinforced with B4C Composites Developed Through Floating Die: Al Njjar, Mazloum, and Sata

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 4, p. 2087, doi. 10.1007/s11837-025-07155-y

By:

Al Njjar, Ameen;
Mazloum, Kamar;
Sata, Amit

Publication type:

Article

Superhigh Yield Ratio and Considerable Plasticity in Powder Metallurgy Al-Zn-Mg-Cu Alloy Prepared with Elemental Powder: Superhigh Yield Ratio and Considerable Plasticity in Powder Metallurgy Al-Zn-Mg-Cu Alloy Prepared with Elemental Powder: Zhang, Li, Dong, Qi, Ren, Han, G. Su, Liu, Y. Su, Kong, and Chen

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 3, p. 1241, doi. 10.1007/s11837-024-07018-y

By:

Zhang, Pengfei;
Li, Xin;
Dong, Shipeng;
Qi, Miao;
Ren, Zhe;
Han, Weihao;
Su, Guoping;
Liu, Xinhua;
Su, Yanjing;
Kong, Demin;
Chen, Cunguang

Publication type:

Article

Novel Synthesis of CuW Composite Containing Micro- and Nano-tungsten Particles Coated with SixWy Phase via Silicothermic Coupling with Aluminothermic Reduction.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 7, p. 3518, doi. 10.1007/s11837-024-06538-x

By:

Cheng, Chu;
Zhang, Meng-En;
Wang, Xin-Yu;
Feng, Yan-Shuo;
Wang, Meng-Xin;
Song, Ke-Xing;
Tao, Meng-Shuang;
Zhang, Tian-Hao;
Song, Yu-Lai

Publication type:

Article

Comparative Study of Oxidation Behavior of Cr2O3 Dispersed W-Zr Alloys at 800°C, 1000°C and 1200°C Fabricated Using Powder Metallurgy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 6, p. 3111, doi. 10.1007/s11837-024-06515-4

By:

Das, Bappa;
Suman, Vadla;
Patra, Anshuman

Publication type:

Article

Optimization of Tribological Behaviour of Ti6Al4V/TiB2/TiC Hybrid MMCs Using Response Surface Methodology.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 6, p. 3214, doi. 10.1007/s11837-024-06444-2

By:

Anbarasan, P.;
Rajamuthamilselvan, M.

Publication type:

Article

Microstructures and Properties of AlCoCrNiFe High-Entropy Alloy Sintered by Hot Oscillating Pressing Under Different Sintering Times.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 5, p. 2554, doi. 10.1007/s11837-024-06459-9

By:

Gao, Ka;
Wu, Ziqian;
Ren, Chunyang;
Xiong, Yan;
Sun, Dejian;
Gao, Yang;
An, Linan

Publication type:

Article

Effect of ZrO2p on the Microstructure and Mechanical Properties of the AZ31 Magnesium Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1690, doi. 10.1007/s11837-024-06369-w

By:

Guo, Ruizhen;
Le, Qichi;
Wang, Yifan;
Ren, Liang;
Jiang, Yanchao;
Li, Dandan;
Liao, Qiyu;
Yu, Fuxiao

Publication type:

Article

Production of AA 2014 Matrix Wollostanite/Wood Ash Solid Waste Particle Reinforced Hybrid Composite with Powder Metallurgy and Investigation of Its Structural Properties.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1294, doi. 10.1007/s11837-024-06368-x

By:

Gökmeşe, Hakan;
Bülbül, Şaban

Publication type:

Article

Relationship Between Powder Size, Prior Particle Boundaries and Properties of FGH4096M Nickel-Based Superalloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1639, doi. 10.1007/s11837-023-06197-4

By:

Ren, Xiaona;
Yang, Lebiao;
Xie, Yin;
Cai, Chao;
Shi, Yusheng;
Ge, Changchun

Publication type:

Article

Optimization of Process Parameters of Hot Consolidated Steel Matrix Composites by Taguchi Method.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 2, p. 818, doi. 10.1007/s11837-023-06228-0

By:

Sahoo, Silani;
Jha, Bharat Bhushan;
Mantry, Sisir

Publication type:

Article

Effect of Mg on Compression Property of Porous Zn Alloys Fabricated by Low-Temperature Reactive Sintering Powder Metallurgy Approach.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 12, p. 5341, doi. 10.1007/s11837-023-05976-3

By:

Yang, Donghui;
Hong, Xia;
Chen, Jianqing;
Wang, Lei

Publication type:

Article

Chloro-deoxidation Behavior of Titanium Powder with SnCl2 Addition.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2578, doi. 10.1007/s11837-023-05825-3

By:

Yang, Fang;
Li, Yanli;
Guo, Zhi;
Shao, Yanru;
Chen, Cunguang;
Guo, Zhimeng

Publication type:

Article

Correlation Between Cooling Rate and γ' Precipitate Size in Rene 95 Alloy Fabricated Through a Powder Metallurgy Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2489, doi. 10.1007/s11837-023-05822-6

By:

Kim, Dae Ha;
Park, Jae-Young;
Hong, Soon Jik;
Im, Hyeon-Tae;
Ko, Won-Seok;
Park, Ki Beom;
Kwon, Hong Gi;
Mo, Chan Bin;
Park, Hyung-Ki

Publication type:

Article

Effect of Induction Heat Treatment Process and Graphene/B4C Amount on the Tribological and Mechanical Properties of Al6061 Hybrid Composites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2554, doi. 10.1007/s11837-023-05790-x

By:

Şenel, Mahmut Can;
Demİr, Mehmethan

Publication type:

Article

Microstructure Evolution and Strength Mechanism of Metastable Powder Metallurgy Ti-6554 Titanium Alloys Under Different Heat Treatment Conditions.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2497, doi. 10.1007/s11837-023-05742-5

By:

Guo, Lili;
Yang, Fang;
Lu, Boxin;
Zhang, Chenzeng;
Chen, Cunguang;
Guo, Zhimeng

Publication type:

Article

Correction: Powder Metallurgy HIP Process Study and Mechanical Property Evaluations for IN740H.

Published in:

2023

By:

Huang, Shenyan;
Hanlon, Timothy;
Shingledecker, John;
Spinelli, Ian;
Drobnjak, Marija;
Shoemaker, Kevin;
Crawford, Cole

Publication type:

Correction Notice

Influence of Manufacturing Parameters on Microstructure Evolution and Corrosion Resistance of Powder Metallurgy Titanium.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 3, p. 816, doi. 10.1007/s11837-022-05627-z

By:

Pohrelyuk, Iryna;
Lavrys, Serhii;
Shliakhetka, Khrystyna;
Savvakin, Dmytro;
Tkachuk, Oleh

Publication type:

Article

Powder Metallurgy HIP Process Study and Mechanical Property Evaluations for IN740H.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 9, p. 3289, doi. 10.1007/s11837-022-05385-y

By:

Huang, Shenyan;
Hanlon, Timothy;
Shingledecker, John;
Spinelli, Ian;
Drobnjak, Marija;
Shoemaker, Kevin;
Crawford, Cole

Publication type:

Article

Effects of Cooling Rate on the Microstructure and Tensile Properties of Powder Metallurgy Ti2AlNb Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 8, p. 2964, doi. 10.1007/s11837-022-05338-5

By:

Tian, Xiaosheng;
Wu, Jie;
Lu, Zhengguan;
Guo, Ruipeng;
Xu, Lei;
Yang, Rui

Publication type:

Article

Temperature Dependence of Hall–Petch Parameters Using In Situ Diffraction Experiments in AZ31 Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 7, p. 2622, doi. 10.1007/s11837-022-05320-1

By:

Garces, G.;
Clemente, A.;
Medina, J.;
Perez, P.;
Stark, A.;
Schell, N.;
Adeva, P.

Publication type:

Article

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 4, p. 1690, doi. 10.1007/s11837-022-05209-z

By:

Hoffman, Andrew K.;
Umretiya, Rajnikant V.;
Gupta, Vipul K.;
Larsen, Michael;
Graff, Corey;
Perlee, Christopher;
Brennan, Patrick;
Rebak, Raul

Publication type:

Article

Processing, Characterization, and In Vitro Corrosion Behavior of Mg-TiB2 Composite for Orthopedic Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 3, p. 981, doi. 10.1007/s11837-021-05114-x

By:

Hussein, M. A.;
Azeem, M. A.;
Madhan Kumar, A.;
Ali, M.;
Alghanim, A.

Publication type:

Article

Synthesis, Characterization, and Surface Analysis of Near-β Ti20Nb20Zr Alloy Proceeded by Powder Metallurgy for Biomedical Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 3, p. 924, doi. 10.1007/s11837-021-05113-y

By:

Hussein, M. A.

Publication type:

Article

Processing and Characterization of a Mechanically Alloyed and Hot Press Sintered High Entropy Alloy from the Al-Cr-Fe-Mn-Mo Family.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 3, p. 971, doi. 10.1007/s11837-021-05109-8

By:

Stasiak, Tomasz;
Sow, Mourtada Aly;
Addad, Ahmed;
Touzin, Matthieu;
Béclin, Franck;
Cordier, Catherine

Publication type:

Article

Precision Modification of Microstructure and Properties Through Laser Engraving.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4211, doi. 10.1007/s11837-021-04959-6

By:

Small, Kathryn A.;
McCue, Ian D.;
Johnston, Katrina S.;
Donaldson, Ian;
Taheri, Mitra L.

Publication type:

Article

Evaluation of MgZnCa Alloys Fabricated Via Powder Metallurgy for Manufacturing Biodegradable Surgical Implants.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 8, p. 2403, doi. 10.1007/s11837-021-04739-2

By:

Carvalho, Jorge Alberto M.;
Domingues, Gláucia;
Fernandes, Márcio T.;
Larcher, Nilton;
Ribeiro, Alexandre A.;
Castro, José Adilson

Publication type:

Article

Oxidation Behavior of Pack-Cemented Refractory High-Entropy Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 12, p. 4594, doi. 10.1007/s11837-020-04439-3

By:

Choi, Won June;
Park, Chun Woong;
Song, Yongwook;
Choi, Hyunjoo;
Byun, Jongmin;
Kim, Young Do

Publication type:

Article

Mechanical and Corrosion Properties of Porous Titanium Prepared by an Electro-Assisted Powder Metallurgy Approach.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 12, p. 4674, doi. 10.1007/s11837-020-04406-y

By:

Qu, Jiakang;
Ma, Xue;
Xie, Hongwei;
Zhang, Dongyang;
Song, Qiushi;
Yin, Huayi

Publication type:

Article

Preparation of 2024-Al/AZ31-Mg Laminated Composite by Powder Metallurgy Integrated Forming and Sintering.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 10, p. 3547, doi. 10.1007/s11837-020-04303-4

By:

Wang, Tao;
Huang, Yufeng;
Yang, Lun;
Ma, Yunzhu;
Wu, Lei;
Yan, Huanyuan;
Liu, Yang;
Liu, Wensheng

Publication type:

Article

Syntactic Aluminum Foam from Recycled Sawing Chips.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 10, p. 3377, doi. 10.1007/s11837-020-04282-6

By:

Thalmaier, Gy.;
Sechel, N. A.;
Vida-Simiti, I.

Publication type:

Article

Densification and Mechanical and Antibacterial Properties of Low-Cost Powder Metallurgy TiCu Intermetallic Alloy as a Potential Biomedical Material.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 9, p. 3262, doi. 10.1007/s11837-020-04234-0

By:

Akbarpour, M. R.;
Moniri Javadhesari, S.

Publication type:

Article

Surface Integrity and Oxidation of a Powder Metallurgy Ni-Based Superalloy Treated by Laser Shock Peening.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 5, p. 1803, doi. 10.1007/s11837-020-04054-2

By:

Tan, Qing;
Yan, Zhiran;
Huang, Hua;
Li, Shilei;
Wang, Yandong;
Feng, Yefei;
Zhou, Xin;
Li, Yinghong;
Ren, Yang;
Antonov, Stoichko

Publication type:

Article

Fabrication of a Cu/TiNi Composite with High Air-Tightness and Low Thermal Expansion.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 2, p. 883, doi. 10.1007/s11837-019-03930-w

By:

Xiao, Tao;
Li, Zhou;
Xiao, Zhu;
Zhang, Xi;
Qiu, Wenting;
Wang, Yang;
Guo, Xiaoli;
Lei, Qian

Publication type:

Article

The Current Status and Development of Semi-solid Powder Forming (SPF).

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 12, p. 4349, doi. 10.1007/s11837-019-03419-6

By:

Luo, Xia;
Wu, Min;
Fang, Chao;
Huang, Bensheng

Publication type:

Article

Thermal Aging and the Hall–Petch Relationship of PM-HIP and Wrought Alloy 625.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 8, p. 2837, doi. 10.1007/s11837-019-03532-6

By:

Getto, Elizabeth;
Tobie, Brian;
Bautista, Esteban;
Bullens, Alexander L.;
Kroll, Zachary T.;
Pavel, Michael J.;
Mao, Keyou S.;
Gandy, David W.;
Wharry, Janelle P.

Publication type:

Article

Conceptual Design Framework for Setting Up Aluminum Alloy Powder Production System for Selective Laser Melting (SLM) Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 5, p. 1840, doi. 10.1007/s11837-019-03431-w

By:

Matsagopane, Gaamangwe;
Olakanmi, Eyitayo Olatunde;
Botes, Annelize;
Kutua, Said

Publication type:

Article

Feasibility of Using Titanium Machine Turnings in Powder Metallurgy Processes.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 5, p. 1831, doi. 10.1007/s11837-019-03400-3

By:

Dunstan, Matthew K.;
Gordon, Avi;
Paramore, James D.;
Butler, Brady G.

Publication type:

Article

Additive Manufacturing of Cemented Tungsten Carbide with a Cobalt-Free Alloy Binder by Selective Laser Melting for High-Hardness Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 4, p. 1535, doi. 10.1007/s11837-019-03366-2

By:

Ku, Nicholas;
Pittari, John J.;
Kilczewski, Steven;
Kudzal, Andelle

Publication type:

Article

Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 3, p. 1062, doi. 10.1007/s11837-018-3305-2

By:

Cordova, Laura;
Campos, Mónica;
Tinga, Tiedo

Publication type:

Article

Strong and Ductile Ti-6Al-4V Alloy Produced by Hot Pressing of Ti-6Al-4V Swarf.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 3, p. 1056, doi. 10.1007/s11837-018-3301-6

By:

Yang, F.;
Pi, Z. Q.;
Zhao, Q. Y.;
Raynova, S.;
Liu, Q.;
Sharp, K.;
Brandt, M.;
Bolzoni, L.;
Qian, M.

Publication type:

Article

Gas-Atomized Al 6061 Powder: Phase Identification and Evolution During Thermal Treatment.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 1, p. 435, doi. 10.1007/s11837-018-3175-7

By:

Tsaknopoulos, Kyle;
Walde, Caitlin;
Champagne, Victor;
Cote, Danielle

Publication type:

Article

Effect of Boron on Microstructure and Fracture of Sintered Ultrafine-Grained Tungsten.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 11, p. 2537, doi. 10.1007/s11837-018-3060-4

By:

Klier, Eric M.;
Casem, Daniel T.;
Butler, Brady G.;
Paramore, James D.;
Hemker, Kevin J.;
Middlemas, Scott C.

Publication type:

Article

Comparative Thermal Aging Effects on PM-HIP and Forged Inconel 690.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 10, p. 2218, doi. 10.1007/s11837-018-2818-z

By:

Bullens, Alexander L.;
Jaye, Elizabeth H.;
Vas, Nathaniel L.;
Wharry, Janelle P.;
Bautista, Esteban;
Cain, Nathan B.;
Mao, Keyou;
Gandy, David W.

Publication type:

Article

Retraction Note to: Ultra-High Strength and Ductile Lamellar-Structured Powder Metallurgy Binary Ti-Ta Alloys.

Published in:

2018

By:

Liu, Yong;
Xu, Shenghang;
Wang, Xin;
Li, Kaiyang;
Liu, Bin;
Wu, Hong;
Tang, Huiping

Publication type:

Correction Notice

Powder Metallurgy of Non-Ferrous Metals: Part I.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 614, doi. 10.1007/s11837-018-2817-0

By:

Qian, M.

Publication type:

Article

Comparison Study on Additive Manufacturing (AM) and Powder Metallurgy (PM) AlSi10Mg Alloys.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 644, doi. 10.1007/s11837-018-2793-4

By:

Shen, J.;
Umeda, J.;
Kondoh, K.;
Chen, B.;
Moon, S. K.;
Yao, X.;
Bi, G.

Publication type:

Article

Advanced Mechanical Properties of a Powder Metallurgy Ti-Al-N Alloy Doped with Ultrahigh Nitrogen Concentration.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 626, doi. 10.1007/s11837-018-2780-9

By:

Shen, J.;
Chen, B.;
Umeda, J.;
Kondoh, K.

Publication type:

Article